Remove unused vendor gopkg.in/fsnotify.v1

Signed-off-by: Matthew Heon <matthew.heon@gmail.com>

Closes: #425
Approved by: rhatdan

11 files changed, 0 insertions, 1777 deletions

diff --git a/vendor.conf b/vendor.conf
index e9bbc82c5..ce77143e2 100644
--- a/vendor.conf
+++ b/vendor.conf
@@ -69,7 +69,6 @@ github.com/godbus/dbus a389bdde4dd695d414e47b755e95e72b7826432c
 github.com/urfave/cli 39908eb08fee7c10d842622a114a5c133fb0a3c6
 github.com/vbatts/tar-split v0.10.2
 github.com/renstrom/dedent v1.0.0
-gopkg.in/fsnotify.v1 v1.4.2
 github.com/fatih/camelcase f6a740d52f961c60348ebb109adde9f4635d7540
 github.com/buger/goterm 2f8dfbc7dbbff5dd1d391ed91482c24df243b2d3
 github.com/dgrijalva/jwt-go v3.0.0
diff --git a/vendor/gopkg.in/fsnotify.v1/LICENSE b/vendor/gopkg.in/fsnotify.v1/LICENSE
deleted file mode 100644
index f21e54080..000000000
--- a/vendor/gopkg.in/fsnotify.v1/LICENSE
+++ /dev/null
@@ -1,28 +0,0 @@
-Copyright (c) 2012 The Go Authors. All rights reserved.
-Copyright (c) 2012 fsnotify Authors. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-   * Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-   * Redistributions in binary form must reproduce the above
-copyright notice, this list of conditions and the following disclaimer
-in the documentation and/or other materials provided with the
-distribution.
-   * Neither the name of Google Inc. nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/gopkg.in/fsnotify.v1/README.md b/vendor/gopkg.in/fsnotify.v1/README.md
deleted file mode 100644
index 3c891e349..000000000
--- a/vendor/gopkg.in/fsnotify.v1/README.md
+++ /dev/null
@@ -1,50 +0,0 @@
-# File system notifications for Go
-
-[![GoDoc](https://godoc.org/github.com/fsnotify/fsnotify?status.svg)](https://godoc.org/github.com/fsnotify/fsnotify) [![Go Report Card](https://goreportcard.com/badge/github.com/fsnotify/fsnotify)](https://goreportcard.com/report/github.com/fsnotify/fsnotify)
-
-fsnotify utilizes [golang.org/x/sys](https://godoc.org/golang.org/x/sys) rather than `syscall` from the standard library. Ensure you have the latest version installed by running:
-
-```console
-go get -u golang.org/x/sys/...
-```
-
-Cross platform: Windows, Linux, BSD and OS X.
-
-|Adapter   |OS        |Status    |
-|----------|----------|----------|
-|inotify   |Linux 2.6.27 or later, Android\*|Supported [![Build Status](https://travis-ci.org/fsnotify/fsnotify.svg?branch=master)](https://travis-ci.org/fsnotify/fsnotify)|
-|kqueue    |BSD, OS X, iOS\*|Supported [![Build Status](https://travis-ci.org/fsnotify/fsnotify.svg?branch=master)](https://travis-ci.org/fsnotify/fsnotify)|
-|ReadDirectoryChangesW|Windows|Supported [![Build status](https://ci.appveyor.com/api/projects/status/ivwjubaih4r0udeh/branch/master?svg=true)](https://ci.appveyor.com/project/NathanYoungman/fsnotify/branch/master)|
-|FSEvents  |OS X          |[Planned](https://github.com/fsnotify/fsnotify/issues/11)|
-|FEN       |Solaris 11    |[In Progress](https://github.com/fsnotify/fsnotify/issues/12)|
-|fanotify  |Linux 2.6.37+ | |
-|USN Journals |Windows    |[Maybe](https://github.com/fsnotify/fsnotify/issues/53)|
-|Polling   |*All*         |[Maybe](https://github.com/fsnotify/fsnotify/issues/9)|
-
-\* Android and iOS are untested.
-
-Please see [the documentation](https://godoc.org/github.com/fsnotify/fsnotify) for usage. Consult the [Wiki](https://github.com/fsnotify/fsnotify/wiki) for the FAQ and further information.
-
-## API stability
-
-fsnotify is a fork of [howeyc/fsnotify](https://godoc.org/github.com/howeyc/fsnotify) with a new API as of v1.0. The API is based on [this design document](http://goo.gl/MrYxyA). 
-
-All [releases](https://github.com/fsnotify/fsnotify/releases) are tagged based on [Semantic Versioning](http://semver.org/). Further API changes are [planned](https://github.com/fsnotify/fsnotify/milestones), and will be tagged with a new major revision number.
-
-Go 1.6 supports dependencies located in the `vendor/` folder. Unless you are creating a library, it is recommended that you copy fsnotify into `vendor/github.com/fsnotify/fsnotify` within your project, and likewise for `golang.org/x/sys`.
-
-## Contributing
-
-Please refer to [CONTRIBUTING][] before opening an issue or pull request.
-
-## Example
-
-See [example_test.go](https://github.com/fsnotify/fsnotify/blob/master/example_test.go).
-
-[contributing]: https://github.com/fsnotify/fsnotify/blob/master/CONTRIBUTING.md
-
-## Related Projects
-
-* [notify](https://github.com/rjeczalik/notify)
-* [fsevents](https://github.com/fsnotify/fsevents)
-
diff --git a/vendor/gopkg.in/fsnotify.v1/fen.go b/vendor/gopkg.in/fsnotify.v1/fen.go
deleted file mode 100644
index ced39cb88..000000000
--- a/vendor/gopkg.in/fsnotify.v1/fen.go
+++ /dev/null
@@ -1,37 +0,0 @@
-// Copyright 2010 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build solaris
-
-package fsnotify
-
-import (
-	"errors"
-)
-
-// Watcher watches a set of files, delivering events to a channel.
-type Watcher struct {
-	Events chan Event
-	Errors chan error
-}
-
-// NewWatcher establishes a new watcher with the underlying OS and begins waiting for events.
-func NewWatcher() (*Watcher, error) {
-	return nil, errors.New("FEN based watcher not yet supported for fsnotify\n")
-}
-
-// Close removes all watches and closes the events channel.
-func (w *Watcher) Close() error {
-	return nil
-}
-
-// Add starts watching the named file or directory (non-recursively).
-func (w *Watcher) Add(name string) error {
-	return nil
-}
-
-// Remove stops watching the the named file or directory (non-recursively).
-func (w *Watcher) Remove(name string) error {
-	return nil
-}
diff --git a/vendor/gopkg.in/fsnotify.v1/fsnotify.go b/vendor/gopkg.in/fsnotify.v1/fsnotify.go
deleted file mode 100644
index e7f55fee7..000000000
--- a/vendor/gopkg.in/fsnotify.v1/fsnotify.go
+++ /dev/null
@@ -1,62 +0,0 @@
-// Copyright 2012 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build !plan9
-
-// Package fsnotify provides a platform-independent interface for file system notifications.
-package fsnotify
-
-import (
-	"bytes"
-	"fmt"
-)
-
-// Event represents a single file system notification.
-type Event struct {
-	Name string // Relative path to the file or directory.
-	Op   Op     // File operation that triggered the event.
-}
-
-// Op describes a set of file operations.
-type Op uint32
-
-// These are the generalized file operations that can trigger a notification.
-const (
-	Create Op = 1 << iota
-	Write
-	Remove
-	Rename
-	Chmod
-)
-
-func (op Op) String() string {
-	// Use a buffer for efficient string concatenation
-	var buffer bytes.Buffer
-
-	if op&Create == Create {
-		buffer.WriteString("|CREATE")
-	}
-	if op&Remove == Remove {
-		buffer.WriteString("|REMOVE")
-	}
-	if op&Write == Write {
-		buffer.WriteString("|WRITE")
-	}
-	if op&Rename == Rename {
-		buffer.WriteString("|RENAME")
-	}
-	if op&Chmod == Chmod {
-		buffer.WriteString("|CHMOD")
-	}
-	if buffer.Len() == 0 {
-		return ""
-	}
-	return buffer.String()[1:] // Strip leading pipe
-}
-
-// String returns a string representation of the event in the form
-// "file: REMOVE|WRITE|..."
-func (e Event) String() string {
-	return fmt.Sprintf("%q: %s", e.Name, e.Op.String())
-}
diff --git a/vendor/gopkg.in/fsnotify.v1/inotify.go b/vendor/gopkg.in/fsnotify.v1/inotify.go
deleted file mode 100644
index f3b74c51f..000000000
--- a/vendor/gopkg.in/fsnotify.v1/inotify.go
+++ /dev/null
@@ -1,325 +0,0 @@
-// Copyright 2010 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build linux
-
-package fsnotify
-
-import (
-	"errors"
-	"fmt"
-	"io"
-	"os"
-	"path/filepath"
-	"strings"
-	"sync"
-	"unsafe"
-
-	"golang.org/x/sys/unix"
-)
-
-// Watcher watches a set of files, delivering events to a channel.
-type Watcher struct {
-	Events   chan Event
-	Errors   chan error
-	mu       sync.Mutex // Map access
-	cv       *sync.Cond // sync removing on rm_watch with IN_IGNORE
-	fd       int
-	poller   *fdPoller
-	watches  map[string]*watch // Map of inotify watches (key: path)
-	paths    map[int]string    // Map of watched paths (key: watch descriptor)
-	done     chan struct{}     // Channel for sending a "quit message" to the reader goroutine
-	doneResp chan struct{}     // Channel to respond to Close
-}
-
-// NewWatcher establishes a new watcher with the underlying OS and begins waiting for events.
-func NewWatcher() (*Watcher, error) {
-	// Create inotify fd
-	fd, errno := unix.InotifyInit1(unix.IN_CLOEXEC)
-	if fd == -1 {
-		return nil, errno
-	}
-	// Create epoll
-	poller, err := newFdPoller(fd)
-	if err != nil {
-		unix.Close(fd)
-		return nil, err
-	}
-	w := &Watcher{
-		fd:       fd,
-		poller:   poller,
-		watches:  make(map[string]*watch),
-		paths:    make(map[int]string),
-		Events:   make(chan Event),
-		Errors:   make(chan error),
-		done:     make(chan struct{}),
-		doneResp: make(chan struct{}),
-	}
-	w.cv = sync.NewCond(&w.mu)
-
-	go w.readEvents()
-	return w, nil
-}
-
-func (w *Watcher) isClosed() bool {
-	select {
-	case <-w.done:
-		return true
-	default:
-		return false
-	}
-}
-
-// Close removes all watches and closes the events channel.
-func (w *Watcher) Close() error {
-	if w.isClosed() {
-		return nil
-	}
-
-	// Send 'close' signal to goroutine, and set the Watcher to closed.
-	close(w.done)
-
-	// Wake up goroutine
-	w.poller.wake()
-
-	// Wait for goroutine to close
-	<-w.doneResp
-
-	return nil
-}
-
-// Add starts watching the named file or directory (non-recursively).
-func (w *Watcher) Add(name string) error {
-	name = filepath.Clean(name)
-	if w.isClosed() {
-		return errors.New("inotify instance already closed")
-	}
-
-	const agnosticEvents = unix.IN_MOVED_TO | unix.IN_MOVED_FROM |
-		unix.IN_CREATE | unix.IN_ATTRIB | unix.IN_MODIFY |
-		unix.IN_MOVE_SELF | unix.IN_DELETE | unix.IN_DELETE_SELF
-
-	var flags uint32 = agnosticEvents
-
-	w.mu.Lock()
-	watchEntry, found := w.watches[name]
-	w.mu.Unlock()
-	if found {
-		watchEntry.flags |= flags
-		flags |= unix.IN_MASK_ADD
-	}
-	wd, errno := unix.InotifyAddWatch(w.fd, name, flags)
-	if wd == -1 {
-		return errno
-	}
-
-	w.mu.Lock()
-	w.watches[name] = &watch{wd: uint32(wd), flags: flags}
-	w.paths[wd] = name
-	w.mu.Unlock()
-
-	return nil
-}
-
-// Remove stops watching the named file or directory (non-recursively).
-func (w *Watcher) Remove(name string) error {
-	name = filepath.Clean(name)
-
-	// Fetch the watch.
-	w.mu.Lock()
-	defer w.mu.Unlock()
-	watch, ok := w.watches[name]
-
-	// Remove it from inotify.
-	if !ok {
-		return fmt.Errorf("can't remove non-existent inotify watch for: %s", name)
-	}
-	// inotify_rm_watch will return EINVAL if the file has been deleted;
-	// the inotify will already have been removed.
-	// watches and pathes are deleted in ignoreLinux() implicitly and asynchronously
-	// by calling inotify_rm_watch() below. e.g. readEvents() goroutine receives IN_IGNORE
-	// so that EINVAL means that the wd is being rm_watch()ed or its file removed
-	// by another thread and we have not received IN_IGNORE event.
-	success, errno := unix.InotifyRmWatch(w.fd, watch.wd)
-	if success == -1 {
-		// TODO: Perhaps it's not helpful to return an error here in every case.
-		// the only two possible errors are:
-		// EBADF, which happens when w.fd is not a valid file descriptor of any kind.
-		// EINVAL, which is when fd is not an inotify descriptor or wd is not a valid watch descriptor.
-		// Watch descriptors are invalidated when they are removed explicitly or implicitly;
-		// explicitly by inotify_rm_watch, implicitly when the file they are watching is deleted.
-		return errno
-	}
-
-	// wait until ignoreLinux() deleting maps
-	exists := true
-	for exists {
-		w.cv.Wait()
-		_, exists = w.watches[name]
-	}
-
-	return nil
-}
-
-type watch struct {
-	wd    uint32 // Watch descriptor (as returned by the inotify_add_watch() syscall)
-	flags uint32 // inotify flags of this watch (see inotify(7) for the list of valid flags)
-}
-
-// readEvents reads from the inotify file descriptor, converts the
-// received events into Event objects and sends them via the Events channel
-func (w *Watcher) readEvents() {
-	var (
-		buf   [unix.SizeofInotifyEvent * 4096]byte // Buffer for a maximum of 4096 raw events
-		n     int                                  // Number of bytes read with read()
-		errno error                                // Syscall errno
-		ok    bool                                 // For poller.wait
-	)
-
-	defer close(w.doneResp)
-	defer close(w.Errors)
-	defer close(w.Events)
-	defer unix.Close(w.fd)
-	defer w.poller.close()
-
-	for {
-		// See if we have been closed.
-		if w.isClosed() {
-			return
-		}
-
-		ok, errno = w.poller.wait()
-		if errno != nil {
-			select {
-			case w.Errors <- errno:
-			case <-w.done:
-				return
-			}
-			continue
-		}
-
-		if !ok {
-			continue
-		}
-
-		n, errno = unix.Read(w.fd, buf[:])
-		// If a signal interrupted execution, see if we've been asked to close, and try again.
-		// http://man7.org/linux/man-pages/man7/signal.7.html :
-		// "Before Linux 3.8, reads from an inotify(7) file descriptor were not restartable"
-		if errno == unix.EINTR {
-			continue
-		}
-
-		// unix.Read might have been woken up by Close. If so, we're done.
-		if w.isClosed() {
-			return
-		}
-
-		if n < unix.SizeofInotifyEvent {
-			var err error
-			if n == 0 {
-				// If EOF is received. This should really never happen.
-				err = io.EOF
-			} else if n < 0 {
-				// If an error occurred while reading.
-				err = errno
-			} else {
-				// Read was too short.
-				err = errors.New("notify: short read in readEvents()")
-			}
-			select {
-			case w.Errors <- err:
-			case <-w.done:
-				return
-			}
-			continue
-		}
-
-		var offset uint32
-		// We don't know how many events we just read into the buffer
-		// While the offset points to at least one whole event...
-		for offset <= uint32(n-unix.SizeofInotifyEvent) {
-			// Point "raw" to the event in the buffer
-			raw := (*unix.InotifyEvent)(unsafe.Pointer(&buf[offset]))
-
-			mask := uint32(raw.Mask)
-			nameLen := uint32(raw.Len)
-			// If the event happened to the watched directory or the watched file, the kernel
-			// doesn't append the filename to the event, but we would like to always fill the
-			// the "Name" field with a valid filename. We retrieve the path of the watch from
-			// the "paths" map.
-			w.mu.Lock()
-			name := w.paths[int(raw.Wd)]
-			w.mu.Unlock()
-			if nameLen > 0 {
-				// Point "bytes" at the first byte of the filename
-				bytes := (*[unix.PathMax]byte)(unsafe.Pointer(&buf[offset+unix.SizeofInotifyEvent]))
-				// The filename is padded with NULL bytes. TrimRight() gets rid of those.
-				name += "/" + strings.TrimRight(string(bytes[0:nameLen]), "\000")
-			}
-
-			event := newEvent(name, mask)
-
-			// Send the events that are not ignored on the events channel
-			if !event.ignoreLinux(w, raw.Wd, mask) {
-				select {
-				case w.Events <- event:
-				case <-w.done:
-					return
-				}
-			}
-
-			// Move to the next event in the buffer
-			offset += unix.SizeofInotifyEvent + nameLen
-		}
-	}
-}
-
-// Certain types of events can be "ignored" and not sent over the Events
-// channel. Such as events marked ignore by the kernel, or MODIFY events
-// against files that do not exist.
-func (e *Event) ignoreLinux(w *Watcher, wd int32, mask uint32) bool {
-	// Ignore anything the inotify API says to ignore
-	if mask&unix.IN_IGNORED == unix.IN_IGNORED {
-		w.mu.Lock()
-		defer w.mu.Unlock()
-		name := w.paths[int(wd)]
-		delete(w.paths, int(wd))
-		delete(w.watches, name)
-		w.cv.Broadcast()
-		return true
-	}
-
-	// If the event is not a DELETE or RENAME, the file must exist.
-	// Otherwise the event is ignored.
-	// *Note*: this was put in place because it was seen that a MODIFY
-	// event was sent after the DELETE. This ignores that MODIFY and
-	// assumes a DELETE will come or has come if the file doesn't exist.
-	if !(e.Op&Remove == Remove || e.Op&Rename == Rename) {
-		_, statErr := os.Lstat(e.Name)
-		return os.IsNotExist(statErr)
-	}
-	return false
-}
-
-// newEvent returns an platform-independent Event based on an inotify mask.
-func newEvent(name string, mask uint32) Event {
-	e := Event{Name: name}
-	if mask&unix.IN_CREATE == unix.IN_CREATE || mask&unix.IN_MOVED_TO == unix.IN_MOVED_TO {
-		e.Op |= Create
-	}
-	if mask&unix.IN_DELETE_SELF == unix.IN_DELETE_SELF || mask&unix.IN_DELETE == unix.IN_DELETE {
-		e.Op |= Remove
-	}
-	if mask&unix.IN_MODIFY == unix.IN_MODIFY {
-		e.Op |= Write
-	}
-	if mask&unix.IN_MOVE_SELF == unix.IN_MOVE_SELF || mask&unix.IN_MOVED_FROM == unix.IN_MOVED_FROM {
-		e.Op |= Rename
-	}
-	if mask&unix.IN_ATTRIB == unix.IN_ATTRIB {
-		e.Op |= Chmod
-	}
-	return e
-}
diff --git a/vendor/gopkg.in/fsnotify.v1/inotify_poller.go b/vendor/gopkg.in/fsnotify.v1/inotify_poller.go
deleted file mode 100644
index cc7db4b22..000000000
--- a/vendor/gopkg.in/fsnotify.v1/inotify_poller.go
+++ /dev/null
@@ -1,187 +0,0 @@
-// Copyright 2015 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build linux
-
-package fsnotify
-
-import (
-	"errors"
-
-	"golang.org/x/sys/unix"
-)
-
-type fdPoller struct {
-	fd   int    // File descriptor (as returned by the inotify_init() syscall)
-	epfd int    // Epoll file descriptor
-	pipe [2]int // Pipe for waking up
-}
-
-func emptyPoller(fd int) *fdPoller {
-	poller := new(fdPoller)
-	poller.fd = fd
-	poller.epfd = -1
-	poller.pipe[0] = -1
-	poller.pipe[1] = -1
-	return poller
-}
-
-// Create a new inotify poller.
-// This creates an inotify handler, and an epoll handler.
-func newFdPoller(fd int) (*fdPoller, error) {
-	var errno error
-	poller := emptyPoller(fd)
-	defer func() {
-		if errno != nil {
-			poller.close()
-		}
-	}()
-	poller.fd = fd
-
-	// Create epoll fd
-	poller.epfd, errno = unix.EpollCreate1(0)
-	if poller.epfd == -1 {
-		return nil, errno
-	}
-	// Create pipe; pipe[0] is the read end, pipe[1] the write end.
-	errno = unix.Pipe2(poller.pipe[:], unix.O_NONBLOCK)
-	if errno != nil {
-		return nil, errno
-	}
-
-	// Register inotify fd with epoll
-	event := unix.EpollEvent{
-		Fd:     int32(poller.fd),
-		Events: unix.EPOLLIN,
-	}
-	errno = unix.EpollCtl(poller.epfd, unix.EPOLL_CTL_ADD, poller.fd, &event)
-	if errno != nil {
-		return nil, errno
-	}
-
-	// Register pipe fd with epoll
-	event = unix.EpollEvent{
-		Fd:     int32(poller.pipe[0]),
-		Events: unix.EPOLLIN,
-	}
-	errno = unix.EpollCtl(poller.epfd, unix.EPOLL_CTL_ADD, poller.pipe[0], &event)
-	if errno != nil {
-		return nil, errno
-	}
-
-	return poller, nil
-}
-
-// Wait using epoll.
-// Returns true if something is ready to be read,
-// false if there is not.
-func (poller *fdPoller) wait() (bool, error) {
-	// 3 possible events per fd, and 2 fds, makes a maximum of 6 events.
-	// I don't know whether epoll_wait returns the number of events returned,
-	// or the total number of events ready.
-	// I decided to catch both by making the buffer one larger than the maximum.
-	events := make([]unix.EpollEvent, 7)
-	for {
-		n, errno := unix.EpollWait(poller.epfd, events, -1)
-		if n == -1 {
-			if errno == unix.EINTR {
-				continue
-			}
-			return false, errno
-		}
-		if n == 0 {
-			// If there are no events, try again.
-			continue
-		}
-		if n > 6 {
-			// This should never happen. More events were returned than should be possible.
-			return false, errors.New("epoll_wait returned more events than I know what to do with")
-		}
-		ready := events[:n]
-		epollhup := false
-		epollerr := false
-		epollin := false
-		for _, event := range ready {
-			if event.Fd == int32(poller.fd) {
-				if event.Events&unix.EPOLLHUP != 0 {
-					// This should not happen, but if it does, treat it as a wakeup.
-					epollhup = true
-				}
-				if event.Events&unix.EPOLLERR != 0 {
-					// If an error is waiting on the file descriptor, we should pretend
-					// something is ready to read, and let unix.Read pick up the error.
-					epollerr = true
-				}
-				if event.Events&unix.EPOLLIN != 0 {
-					// There is data to read.
-					epollin = true
-				}
-			}
-			if event.Fd == int32(poller.pipe[0]) {
-				if event.Events&unix.EPOLLHUP != 0 {
-					// Write pipe descriptor was closed, by us. This means we're closing down the
-					// watcher, and we should wake up.
-				}
-				if event.Events&unix.EPOLLERR != 0 {
-					// If an error is waiting on the pipe file descriptor.
-					// This is an absolute mystery, and should never ever happen.
-					return false, errors.New("Error on the pipe descriptor.")
-				}
-				if event.Events&unix.EPOLLIN != 0 {
-					// This is a regular wakeup, so we have to clear the buffer.
-					err := poller.clearWake()
-					if err != nil {
-						return false, err
-					}
-				}
-			}
-		}
-
-		if epollhup || epollerr || epollin {
-			return true, nil
-		}
-		return false, nil
-	}
-}
-
-// Close the write end of the poller.
-func (poller *fdPoller) wake() error {
-	buf := make([]byte, 1)
-	n, errno := unix.Write(poller.pipe[1], buf)
-	if n == -1 {
-		if errno == unix.EAGAIN {
-			// Buffer is full, poller will wake.
-			return nil
-		}
-		return errno
-	}
-	return nil
-}
-
-func (poller *fdPoller) clearWake() error {
-	// You have to be woken up a LOT in order to get to 100!
-	buf := make([]byte, 100)
-	n, errno := unix.Read(poller.pipe[0], buf)
-	if n == -1 {
-		if errno == unix.EAGAIN {
-			// Buffer is empty, someone else cleared our wake.
-			return nil
-		}
-		return errno
-	}
-	return nil
-}
-
-// Close all poller file descriptors, but not the one passed to it.
-func (poller *fdPoller) close() {
-	if poller.pipe[1] != -1 {
-		unix.Close(poller.pipe[1])
-	}
-	if poller.pipe[0] != -1 {
-		unix.Close(poller.pipe[0])
-	}
-	if poller.epfd != -1 {
-		unix.Close(poller.epfd)
-	}
-}
diff --git a/vendor/gopkg.in/fsnotify.v1/kqueue.go b/vendor/gopkg.in/fsnotify.v1/kqueue.go
deleted file mode 100644
index c2b4acb18..000000000
--- a/vendor/gopkg.in/fsnotify.v1/kqueue.go
+++ /dev/null
@@ -1,503 +0,0 @@
-// Copyright 2010 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build freebsd openbsd netbsd dragonfly darwin
-
-package fsnotify
-
-import (
-	"errors"
-	"fmt"
-	"io/ioutil"
-	"os"
-	"path/filepath"
-	"sync"
-	"time"
-
-	"golang.org/x/sys/unix"
-)
-
-// Watcher watches a set of files, delivering events to a channel.
-type Watcher struct {
-	Events chan Event
-	Errors chan error
-	done   chan bool // Channel for sending a "quit message" to the reader goroutine
-
-	kq int // File descriptor (as returned by the kqueue() syscall).
-
-	mu              sync.Mutex        // Protects access to watcher data
-	watches         map[string]int    // Map of watched file descriptors (key: path).
-	externalWatches map[string]bool   // Map of watches added by user of the library.
-	dirFlags        map[string]uint32 // Map of watched directories to fflags used in kqueue.
-	paths           map[int]pathInfo  // Map file descriptors to path names for processing kqueue events.
-	fileExists      map[string]bool   // Keep track of if we know this file exists (to stop duplicate create events).
-	isClosed        bool              // Set to true when Close() is first called
-}
-
-type pathInfo struct {
-	name  string
-	isDir bool
-}
-
-// NewWatcher establishes a new watcher with the underlying OS and begins waiting for events.
-func NewWatcher() (*Watcher, error) {
-	kq, err := kqueue()
-	if err != nil {
-		return nil, err
-	}
-
-	w := &Watcher{
-		kq:              kq,
-		watches:         make(map[string]int),
-		dirFlags:        make(map[string]uint32),
-		paths:           make(map[int]pathInfo),
-		fileExists:      make(map[string]bool),
-		externalWatches: make(map[string]bool),
-		Events:          make(chan Event),
-		Errors:          make(chan error),
-		done:            make(chan bool),
-	}
-
-	go w.readEvents()
-	return w, nil
-}
-
-// Close removes all watches and closes the events channel.
-func (w *Watcher) Close() error {
-	w.mu.Lock()
-	if w.isClosed {
-		w.mu.Unlock()
-		return nil
-	}
-	w.isClosed = true
-	w.mu.Unlock()
-
-	// copy paths to remove while locked
-	w.mu.Lock()
-	var pathsToRemove = make([]string, 0, len(w.watches))
-	for name := range w.watches {
-		pathsToRemove = append(pathsToRemove, name)
-	}
-	w.mu.Unlock()
-	// unlock before calling Remove, which also locks
-
-	var err error
-	for _, name := range pathsToRemove {
-		if e := w.Remove(name); e != nil && err == nil {
-			err = e
-		}
-	}
-
-	// Send "quit" message to the reader goroutine:
-	w.done <- true
-
-	return nil
-}
-
-// Add starts watching the named file or directory (non-recursively).
-func (w *Watcher) Add(name string) error {
-	w.mu.Lock()
-	w.externalWatches[name] = true
-	w.mu.Unlock()
-	_, err := w.addWatch(name, noteAllEvents)
-	return err
-}
-
-// Remove stops watching the the named file or directory (non-recursively).
-func (w *Watcher) Remove(name string) error {
-	name = filepath.Clean(name)
-	w.mu.Lock()
-	watchfd, ok := w.watches[name]
-	w.mu.Unlock()
-	if !ok {
-		return fmt.Errorf("can't remove non-existent kevent watch for: %s", name)
-	}
-
-	const registerRemove = unix.EV_DELETE
-	if err := register(w.kq, []int{watchfd}, registerRemove, 0); err != nil {
-		return err
-	}
-
-	unix.Close(watchfd)
-
-	w.mu.Lock()
-	isDir := w.paths[watchfd].isDir
-	delete(w.watches, name)
-	delete(w.paths, watchfd)
-	delete(w.dirFlags, name)
-	w.mu.Unlock()
-
-	// Find all watched paths that are in this directory that are not external.
-	if isDir {
-		var pathsToRemove []string
-		w.mu.Lock()
-		for _, path := range w.paths {
-			wdir, _ := filepath.Split(path.name)
-			if filepath.Clean(wdir) == name {
-				if !w.externalWatches[path.name] {
-					pathsToRemove = append(pathsToRemove, path.name)
-				}
-			}
-		}
-		w.mu.Unlock()
-		for _, name := range pathsToRemove {
-			// Since these are internal, not much sense in propagating error
-			// to the user, as that will just confuse them with an error about
-			// a path they did not explicitly watch themselves.
-			w.Remove(name)
-		}
-	}
-
-	return nil
-}
-
-// Watch all events (except NOTE_EXTEND, NOTE_LINK, NOTE_REVOKE)
-const noteAllEvents = unix.NOTE_DELETE | unix.NOTE_WRITE | unix.NOTE_ATTRIB | unix.NOTE_RENAME
-
-// keventWaitTime to block on each read from kevent
-var keventWaitTime = durationToTimespec(100 * time.Millisecond)
-
-// addWatch adds name to the watched file set.
-// The flags are interpreted as described in kevent(2).
-// Returns the real path to the file which was added, if any, which may be different from the one passed in the case of symlinks.
-func (w *Watcher) addWatch(name string, flags uint32) (string, error) {
-	var isDir bool
-	// Make ./name and name equivalent
-	name = filepath.Clean(name)
-
-	w.mu.Lock()
-	if w.isClosed {
-		w.mu.Unlock()
-		return "", errors.New("kevent instance already closed")
-	}
-	watchfd, alreadyWatching := w.watches[name]
-	// We already have a watch, but we can still override flags.
-	if alreadyWatching {
-		isDir = w.paths[watchfd].isDir
-	}
-	w.mu.Unlock()
-
-	if !alreadyWatching {
-		fi, err := os.Lstat(name)
-		if err != nil {
-			return "", err
-		}
-
-		// Don't watch sockets.
-		if fi.Mode()&os.ModeSocket == os.ModeSocket {
-			return "", nil
-		}
-
-		// Don't watch named pipes.
-		if fi.Mode()&os.ModeNamedPipe == os.ModeNamedPipe {
-			return "", nil
-		}
-
-		// Follow Symlinks
-		// Unfortunately, Linux can add bogus symlinks to watch list without
-		// issue, and Windows can't do symlinks period (AFAIK). To  maintain
-		// consistency, we will act like everything is fine. There will simply
-		// be no file events for broken symlinks.
-		// Hence the returns of nil on errors.
-		if fi.Mode()&os.ModeSymlink == os.ModeSymlink {
-			name, err = filepath.EvalSymlinks(name)
-			if err != nil {
-				return "", nil
-			}
-
-			w.mu.Lock()
-			_, alreadyWatching = w.watches[name]
-			w.mu.Unlock()
-
-			if alreadyWatching {
-				return name, nil
-			}
-
-			fi, err = os.Lstat(name)
-			if err != nil {
-				return "", nil
-			}
-		}
-
-		watchfd, err = unix.Open(name, openMode, 0700)
-		if watchfd == -1 {
-			return "", err
-		}
-
-		isDir = fi.IsDir()
-	}
-
-	const registerAdd = unix.EV_ADD | unix.EV_CLEAR | unix.EV_ENABLE
-	if err := register(w.kq, []int{watchfd}, registerAdd, flags); err != nil {
-		unix.Close(watchfd)
-		return "", err
-	}
-
-	if !alreadyWatching {
-		w.mu.Lock()
-		w.watches[name] = watchfd
-		w.paths[watchfd] = pathInfo{name: name, isDir: isDir}
-		w.mu.Unlock()
-	}
-
-	if isDir {
-		// Watch the directory if it has not been watched before,
-		// or if it was watched before, but perhaps only a NOTE_DELETE (watchDirectoryFiles)
-		w.mu.Lock()
-
-		watchDir := (flags&unix.NOTE_WRITE) == unix.NOTE_WRITE &&
-			(!alreadyWatching || (w.dirFlags[name]&unix.NOTE_WRITE) != unix.NOTE_WRITE)
-		// Store flags so this watch can be updated later
-		w.dirFlags[name] = flags
-		w.mu.Unlock()
-
-		if watchDir {
-			if err := w.watchDirectoryFiles(name); err != nil {
-				return "", err
-			}
-		}
-	}
-	return name, nil
-}
-
-// readEvents reads from kqueue and converts the received kevents into
-// Event values that it sends down the Events channel.
-func (w *Watcher) readEvents() {
-	eventBuffer := make([]unix.Kevent_t, 10)
-
-	for {
-		// See if there is a message on the "done" channel
-		select {
-		case <-w.done:
-			err := unix.Close(w.kq)
-			if err != nil {
-				w.Errors <- err
-			}
-			close(w.Events)
-			close(w.Errors)
-			return
-		default:
-		}
-
-		// Get new events
-		kevents, err := read(w.kq, eventBuffer, &keventWaitTime)
-		// EINTR is okay, the syscall was interrupted before timeout expired.
-		if err != nil && err != unix.EINTR {
-			w.Errors <- err
-			continue
-		}
-
-		// Flush the events we received to the Events channel
-		for len(kevents) > 0 {
-			kevent := &kevents[0]
-			watchfd := int(kevent.Ident)
-			mask := uint32(kevent.Fflags)
-			w.mu.Lock()
-			path := w.paths[watchfd]
-			w.mu.Unlock()
-			event := newEvent(path.name, mask)
-
-			if path.isDir && !(event.Op&Remove == Remove) {
-				// Double check to make sure the directory exists. This can happen when
-				// we do a rm -fr on a recursively watched folders and we receive a
-				// modification event first but the folder has been deleted and later
-				// receive the delete event
-				if _, err := os.Lstat(event.Name); os.IsNotExist(err) {
-					// mark is as delete event
-					event.Op |= Remove
-				}
-			}
-
-			if event.Op&Rename == Rename || event.Op&Remove == Remove {
-				w.Remove(event.Name)
-				w.mu.Lock()
-				delete(w.fileExists, event.Name)
-				w.mu.Unlock()
-			}
-
-			if path.isDir && event.Op&Write == Write && !(event.Op&Remove == Remove) {
-				w.sendDirectoryChangeEvents(event.Name)
-			} else {
-				// Send the event on the Events channel
-				w.Events <- event
-			}
-
-			if event.Op&Remove == Remove {
-				// Look for a file that may have overwritten this.
-				// For example, mv f1 f2 will delete f2, then create f2.
-				if path.isDir {
-					fileDir := filepath.Clean(event.Name)
-					w.mu.Lock()
-					_, found := w.watches[fileDir]
-					w.mu.Unlock()
-					if found {
-						// make sure the directory exists before we watch for changes. When we
-						// do a recursive watch and perform rm -fr, the parent directory might
-						// have gone missing, ignore the missing directory and let the
-						// upcoming delete event remove the watch from the parent directory.
-						if _, err := os.Lstat(fileDir); err == nil {
-							w.sendDirectoryChangeEvents(fileDir)
-						}
-					}
-				} else {
-					filePath := filepath.Clean(event.Name)
-					if fileInfo, err := os.Lstat(filePath); err == nil {
-						w.sendFileCreatedEventIfNew(filePath, fileInfo)
-					}
-				}
-			}
-
-			// Move to next event
-			kevents = kevents[1:]
-		}
-	}
-}
-
-// newEvent returns an platform-independent Event based on kqueue Fflags.
-func newEvent(name string, mask uint32) Event {
-	e := Event{Name: name}
-	if mask&unix.NOTE_DELETE == unix.NOTE_DELETE {
-		e.Op |= Remove
-	}
-	if mask&unix.NOTE_WRITE == unix.NOTE_WRITE {
-		e.Op |= Write
-	}
-	if mask&unix.NOTE_RENAME == unix.NOTE_RENAME {
-		e.Op |= Rename
-	}
-	if mask&unix.NOTE_ATTRIB == unix.NOTE_ATTRIB {
-		e.Op |= Chmod
-	}
-	return e
-}
-
-func newCreateEvent(name string) Event {
-	return Event{Name: name, Op: Create}
-}
-
-// watchDirectoryFiles to mimic inotify when adding a watch on a directory
-func (w *Watcher) watchDirectoryFiles(dirPath string) error {
-	// Get all files
-	files, err := ioutil.ReadDir(dirPath)
-	if err != nil {
-		return err
-	}
-
-	for _, fileInfo := range files {
-		filePath := filepath.Join(dirPath, fileInfo.Name())
-		filePath, err = w.internalWatch(filePath, fileInfo)
-		if err != nil {
-			return err
-		}
-
-		w.mu.Lock()
-		w.fileExists[filePath] = true
-		w.mu.Unlock()
-	}
-
-	return nil
-}
-
-// sendDirectoryEvents searches the directory for newly created files
-// and sends them over the event channel. This functionality is to have
-// the BSD version of fsnotify match Linux inotify which provides a
-// create event for files created in a watched directory.
-func (w *Watcher) sendDirectoryChangeEvents(dirPath string) {
-	// Get all files
-	files, err := ioutil.ReadDir(dirPath)
-	if err != nil {
-		w.Errors <- err
-	}
-
-	// Search for new files
-	for _, fileInfo := range files {
-		filePath := filepath.Join(dirPath, fileInfo.Name())
-		err := w.sendFileCreatedEventIfNew(filePath, fileInfo)
-
-		if err != nil {
-			return
-		}
-	}
-}
-
-// sendFileCreatedEvent sends a create event if the file isn't already being tracked.
-func (w *Watcher) sendFileCreatedEventIfNew(filePath string, fileInfo os.FileInfo) (err error) {
-	w.mu.Lock()
-	_, doesExist := w.fileExists[filePath]
-	w.mu.Unlock()
-	if !doesExist {
-		// Send create event
-		w.Events <- newCreateEvent(filePath)
-	}
-
-	// like watchDirectoryFiles (but without doing another ReadDir)
-	filePath, err = w.internalWatch(filePath, fileInfo)
-	if err != nil {
-		return err
-	}
-
-	w.mu.Lock()
-	w.fileExists[filePath] = true
-	w.mu.Unlock()
-
-	return nil
-}
-
-func (w *Watcher) internalWatch(name string, fileInfo os.FileInfo) (string, error) {
-	if fileInfo.IsDir() {
-		// mimic Linux providing delete events for subdirectories
-		// but preserve the flags used if currently watching subdirectory
-		w.mu.Lock()
-		flags := w.dirFlags[name]
-		w.mu.Unlock()
-
-		flags |= unix.NOTE_DELETE | unix.NOTE_RENAME
-		return w.addWatch(name, flags)
-	}
-
-	// watch file to mimic Linux inotify
-	return w.addWatch(name, noteAllEvents)
-}
-
-// kqueue creates a new kernel event queue and returns a descriptor.
-func kqueue() (kq int, err error) {
-	kq, err = unix.Kqueue()
-	if kq == -1 {
-		return kq, err
-	}
-	return kq, nil
-}
-
-// register events with the queue
-func register(kq int, fds []int, flags int, fflags uint32) error {
-	changes := make([]unix.Kevent_t, len(fds))
-
-	for i, fd := range fds {
-		// SetKevent converts int to the platform-specific types:
-		unix.SetKevent(&changes[i], fd, unix.EVFILT_VNODE, flags)
-		changes[i].Fflags = fflags
-	}
-
-	// register the events
-	success, err := unix.Kevent(kq, changes, nil, nil)
-	if success == -1 {
-		return err
-	}
-	return nil
-}
-
-// read retrieves pending events, or waits until an event occurs.
-// A timeout of nil blocks indefinitely, while 0 polls the queue.
-func read(kq int, events []unix.Kevent_t, timeout *unix.Timespec) ([]unix.Kevent_t, error) {
-	n, err := unix.Kevent(kq, nil, events, timeout)
-	if err != nil {
-		return nil, err
-	}
-	return events[0:n], nil
-}
-
-// durationToTimespec prepares a timeout value
-func durationToTimespec(d time.Duration) unix.Timespec {
-	return unix.NsecToTimespec(d.Nanoseconds())
-}
diff --git a/vendor/gopkg.in/fsnotify.v1/open_mode_bsd.go b/vendor/gopkg.in/fsnotify.v1/open_mode_bsd.go
deleted file mode 100644
index 7d8de1451..000000000
--- a/vendor/gopkg.in/fsnotify.v1/open_mode_bsd.go
+++ /dev/null
@@ -1,11 +0,0 @@
-// Copyright 2013 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build freebsd openbsd netbsd dragonfly
-
-package fsnotify
-
-import "golang.org/x/sys/unix"
-
-const openMode = unix.O_NONBLOCK | unix.O_RDONLY
diff --git a/vendor/gopkg.in/fsnotify.v1/open_mode_darwin.go b/vendor/gopkg.in/fsnotify.v1/open_mode_darwin.go
deleted file mode 100644
index 9139e1716..000000000
--- a/vendor/gopkg.in/fsnotify.v1/open_mode_darwin.go
+++ /dev/null
@@ -1,12 +0,0 @@
-// Copyright 2013 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build darwin
-
-package fsnotify
-
-import "golang.org/x/sys/unix"
-
-// note: this constant is not defined on BSD
-const openMode = unix.O_EVTONLY
diff --git a/vendor/gopkg.in/fsnotify.v1/windows.go b/vendor/gopkg.in/fsnotify.v1/windows.go
deleted file mode 100644
index 09436f31d..000000000
--- a/vendor/gopkg.in/fsnotify.v1/windows.go
+++ /dev/null
@@ -1,561 +0,0 @@
-// Copyright 2011 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// +build windows
-
-package fsnotify
-
-import (
-	"errors"
-	"fmt"
-	"os"
-	"path/filepath"
-	"runtime"
-	"sync"
-	"syscall"
-	"unsafe"
-)
-
-// Watcher watches a set of files, delivering events to a channel.
-type Watcher struct {
-	Events   chan Event
-	Errors   chan error
-	isClosed bool           // Set to true when Close() is first called
-	mu       sync.Mutex     // Map access
-	port     syscall.Handle // Handle to completion port
-	watches  watchMap       // Map of watches (key: i-number)
-	input    chan *input    // Inputs to the reader are sent on this channel
-	quit     chan chan<- error
-}
-
-// NewWatcher establishes a new watcher with the underlying OS and begins waiting for events.
-func NewWatcher() (*Watcher, error) {
-	port, e := syscall.CreateIoCompletionPort(syscall.InvalidHandle, 0, 0, 0)
-	if e != nil {
-		return nil, os.NewSyscallError("CreateIoCompletionPort", e)
-	}
-	w := &Watcher{
-		port:    port,
-		watches: make(watchMap),
-		input:   make(chan *input, 1),
-		Events:  make(chan Event, 50),
-		Errors:  make(chan error),
-		quit:    make(chan chan<- error, 1),
-	}
-	go w.readEvents()
-	return w, nil
-}
-
-// Close removes all watches and closes the events channel.
-func (w *Watcher) Close() error {
-	if w.isClosed {
-		return nil
-	}
-	w.isClosed = true
-
-	// Send "quit" message to the reader goroutine
-	ch := make(chan error)
-	w.quit <- ch
-	if err := w.wakeupReader(); err != nil {
-		return err
-	}
-	return <-ch
-}
-
-// Add starts watching the named file or directory (non-recursively).
-func (w *Watcher) Add(name string) error {
-	if w.isClosed {
-		return errors.New("watcher already closed")
-	}
-	in := &input{
-		op:    opAddWatch,
-		path:  filepath.Clean(name),
-		flags: sysFSALLEVENTS,
-		reply: make(chan error),
-	}
-	w.input <- in
-	if err := w.wakeupReader(); err != nil {
-		return err
-	}
-	return <-in.reply
-}
-
-// Remove stops watching the the named file or directory (non-recursively).
-func (w *Watcher) Remove(name string) error {
-	in := &input{
-		op:    opRemoveWatch,
-		path:  filepath.Clean(name),
-		reply: make(chan error),
-	}
-	w.input <- in
-	if err := w.wakeupReader(); err != nil {
-		return err
-	}
-	return <-in.reply
-}
-
-const (
-	// Options for AddWatch
-	sysFSONESHOT = 0x80000000
-	sysFSONLYDIR = 0x1000000
-
-	// Events
-	sysFSACCESS     = 0x1
-	sysFSALLEVENTS  = 0xfff
-	sysFSATTRIB     = 0x4
-	sysFSCLOSE      = 0x18
-	sysFSCREATE     = 0x100
-	sysFSDELETE     = 0x200
-	sysFSDELETESELF = 0x400
-	sysFSMODIFY     = 0x2
-	sysFSMOVE       = 0xc0
-	sysFSMOVEDFROM  = 0x40
-	sysFSMOVEDTO    = 0x80
-	sysFSMOVESELF   = 0x800
-
-	// Special events
-	sysFSIGNORED   = 0x8000
-	sysFSQOVERFLOW = 0x4000
-)
-
-func newEvent(name string, mask uint32) Event {
-	e := Event{Name: name}
-	if mask&sysFSCREATE == sysFSCREATE || mask&sysFSMOVEDTO == sysFSMOVEDTO {
-		e.Op |= Create
-	}
-	if mask&sysFSDELETE == sysFSDELETE || mask&sysFSDELETESELF == sysFSDELETESELF {
-		e.Op |= Remove
-	}
-	if mask&sysFSMODIFY == sysFSMODIFY {
-		e.Op |= Write
-	}
-	if mask&sysFSMOVE == sysFSMOVE || mask&sysFSMOVESELF == sysFSMOVESELF || mask&sysFSMOVEDFROM == sysFSMOVEDFROM {
-		e.Op |= Rename
-	}
-	if mask&sysFSATTRIB == sysFSATTRIB {
-		e.Op |= Chmod
-	}
-	return e
-}
-
-const (
-	opAddWatch = iota
-	opRemoveWatch
-)
-
-const (
-	provisional uint64 = 1 << (32 + iota)
-)
-
-type input struct {
-	op    int
-	path  string
-	flags uint32
-	reply chan error
-}
-
-type inode struct {
-	handle syscall.Handle
-	volume uint32
-	index  uint64
-}
-
-type watch struct {
-	ov     syscall.Overlapped
-	ino    *inode            // i-number
-	path   string            // Directory path
-	mask   uint64            // Directory itself is being watched with these notify flags
-	names  map[string]uint64 // Map of names being watched and their notify flags
-	rename string            // Remembers the old name while renaming a file
-	buf    [4096]byte
-}
-
-type indexMap map[uint64]*watch
-type watchMap map[uint32]indexMap
-
-func (w *Watcher) wakeupReader() error {
-	e := syscall.PostQueuedCompletionStatus(w.port, 0, 0, nil)
-	if e != nil {
-		return os.NewSyscallError("PostQueuedCompletionStatus", e)
-	}
-	return nil
-}
-
-func getDir(pathname string) (dir string, err error) {
-	attr, e := syscall.GetFileAttributes(syscall.StringToUTF16Ptr(pathname))
-	if e != nil {
-		return "", os.NewSyscallError("GetFileAttributes", e)
-	}
-	if attr&syscall.FILE_ATTRIBUTE_DIRECTORY != 0 {
-		dir = pathname
-	} else {
-		dir, _ = filepath.Split(pathname)
-		dir = filepath.Clean(dir)
-	}
-	return
-}
-
-func getIno(path string) (ino *inode, err error) {
-	h, e := syscall.CreateFile(syscall.StringToUTF16Ptr(path),
-		syscall.FILE_LIST_DIRECTORY,
-		syscall.FILE_SHARE_READ|syscall.FILE_SHARE_WRITE|syscall.FILE_SHARE_DELETE,
-		nil, syscall.OPEN_EXISTING,
-		syscall.FILE_FLAG_BACKUP_SEMANTICS|syscall.FILE_FLAG_OVERLAPPED, 0)
-	if e != nil {
-		return nil, os.NewSyscallError("CreateFile", e)
-	}
-	var fi syscall.ByHandleFileInformation
-	if e = syscall.GetFileInformationByHandle(h, &fi); e != nil {
-		syscall.CloseHandle(h)
-		return nil, os.NewSyscallError("GetFileInformationByHandle", e)
-	}
-	ino = &inode{
-		handle: h,
-		volume: fi.VolumeSerialNumber,
-		index:  uint64(fi.FileIndexHigh)<<32 | uint64(fi.FileIndexLow),
-	}
-	return ino, nil
-}
-
-// Must run within the I/O thread.
-func (m watchMap) get(ino *inode) *watch {
-	if i := m[ino.volume]; i != nil {
-		return i[ino.index]
-	}
-	return nil
-}
-
-// Must run within the I/O thread.
-func (m watchMap) set(ino *inode, watch *watch) {
-	i := m[ino.volume]
-	if i == nil {
-		i = make(indexMap)
-		m[ino.volume] = i
-	}
-	i[ino.index] = watch
-}
-
-// Must run within the I/O thread.
-func (w *Watcher) addWatch(pathname string, flags uint64) error {
-	dir, err := getDir(pathname)
-	if err != nil {
-		return err
-	}
-	if flags&sysFSONLYDIR != 0 && pathname != dir {
-		return nil
-	}
-	ino, err := getIno(dir)
-	if err != nil {
-		return err
-	}
-	w.mu.Lock()
-	watchEntry := w.watches.get(ino)
-	w.mu.Unlock()
-	if watchEntry == nil {
-		if _, e := syscall.CreateIoCompletionPort(ino.handle, w.port, 0, 0); e != nil {
-			syscall.CloseHandle(ino.handle)
-			return os.NewSyscallError("CreateIoCompletionPort", e)
-		}
-		watchEntry = &watch{
-			ino:   ino,
-			path:  dir,
-			names: make(map[string]uint64),
-		}
-		w.mu.Lock()
-		w.watches.set(ino, watchEntry)
-		w.mu.Unlock()
-		flags |= provisional
-	} else {
-		syscall.CloseHandle(ino.handle)
-	}
-	if pathname == dir {
-		watchEntry.mask |= flags
-	} else {
-		watchEntry.names[filepath.Base(pathname)] |= flags
-	}
-	if err = w.startRead(watchEntry); err != nil {
-		return err
-	}
-	if pathname == dir {
-		watchEntry.mask &= ^provisional
-	} else {
-		watchEntry.names[filepath.Base(pathname)] &= ^provisional
-	}
-	return nil
-}
-
-// Must run within the I/O thread.
-func (w *Watcher) remWatch(pathname string) error {
-	dir, err := getDir(pathname)
-	if err != nil {
-		return err
-	}
-	ino, err := getIno(dir)
-	if err != nil {
-		return err
-	}
-	w.mu.Lock()
-	watch := w.watches.get(ino)
-	w.mu.Unlock()
-	if watch == nil {
-		return fmt.Errorf("can't remove non-existent watch for: %s", pathname)
-	}
-	if pathname == dir {
-		w.sendEvent(watch.path, watch.mask&sysFSIGNORED)
-		watch.mask = 0
-	} else {
-		name := filepath.Base(pathname)
-		w.sendEvent(filepath.Join(watch.path, name), watch.names[name]&sysFSIGNORED)
-		delete(watch.names, name)
-	}
-	return w.startRead(watch)
-}
-
-// Must run within the I/O thread.
-func (w *Watcher) deleteWatch(watch *watch) {
-	for name, mask := range watch.names {
-		if mask&provisional == 0 {
-			w.sendEvent(filepath.Join(watch.path, name), mask&sysFSIGNORED)
-		}
-		delete(watch.names, name)
-	}
-	if watch.mask != 0 {
-		if watch.mask&provisional == 0 {
-			w.sendEvent(watch.path, watch.mask&sysFSIGNORED)
-		}
-		watch.mask = 0
-	}
-}
-
-// Must run within the I/O thread.
-func (w *Watcher) startRead(watch *watch) error {
-	if e := syscall.CancelIo(watch.ino.handle); e != nil {
-		w.Errors <- os.NewSyscallError("CancelIo", e)
-		w.deleteWatch(watch)
-	}
-	mask := toWindowsFlags(watch.mask)
-	for _, m := range watch.names {
-		mask |= toWindowsFlags(m)
-	}
-	if mask == 0 {
-		if e := syscall.CloseHandle(watch.ino.handle); e != nil {
-			w.Errors <- os.NewSyscallError("CloseHandle", e)
-		}
-		w.mu.Lock()
-		delete(w.watches[watch.ino.volume], watch.ino.index)
-		w.mu.Unlock()
-		return nil
-	}
-	e := syscall.ReadDirectoryChanges(watch.ino.handle, &watch.buf[0],
-		uint32(unsafe.Sizeof(watch.buf)), false, mask, nil, &watch.ov, 0)
-	if e != nil {
-		err := os.NewSyscallError("ReadDirectoryChanges", e)
-		if e == syscall.ERROR_ACCESS_DENIED && watch.mask&provisional == 0 {
-			// Watched directory was probably removed
-			if w.sendEvent(watch.path, watch.mask&sysFSDELETESELF) {
-				if watch.mask&sysFSONESHOT != 0 {
-					watch.mask = 0
-				}
-			}
-			err = nil
-		}
-		w.deleteWatch(watch)
-		w.startRead(watch)
-		return err
-	}
-	return nil
-}
-
-// readEvents reads from the I/O completion port, converts the
-// received events into Event objects and sends them via the Events channel.
-// Entry point to the I/O thread.
-func (w *Watcher) readEvents() {
-	var (
-		n, key uint32
-		ov     *syscall.Overlapped
-	)
-	runtime.LockOSThread()
-
-	for {
-		e := syscall.GetQueuedCompletionStatus(w.port, &n, &key, &ov, syscall.INFINITE)
-		watch := (*watch)(unsafe.Pointer(ov))
-
-		if watch == nil {
-			select {
-			case ch := <-w.quit:
-				w.mu.Lock()
-				var indexes []indexMap
-				for _, index := range w.watches {
-					indexes = append(indexes, index)
-				}
-				w.mu.Unlock()
-				for _, index := range indexes {
-					for _, watch := range index {
-						w.deleteWatch(watch)
-						w.startRead(watch)
-					}
-				}
-				var err error
-				if e := syscall.CloseHandle(w.port); e != nil {
-					err = os.NewSyscallError("CloseHandle", e)
-				}
-				close(w.Events)
-				close(w.Errors)
-				ch <- err
-				return
-			case in := <-w.input:
-				switch in.op {
-				case opAddWatch:
-					in.reply <- w.addWatch(in.path, uint64(in.flags))
-				case opRemoveWatch:
-					in.reply <- w.remWatch(in.path)
-				}
-			default:
-			}
-			continue
-		}
-
-		switch e {
-		case syscall.ERROR_MORE_DATA:
-			if watch == nil {
-				w.Errors <- errors.New("ERROR_MORE_DATA has unexpectedly null lpOverlapped buffer")
-			} else {
-				// The i/o succeeded but the buffer is full.
-				// In theory we should be building up a full packet.
-				// In practice we can get away with just carrying on.
-				n = uint32(unsafe.Sizeof(watch.buf))
-			}
-		case syscall.ERROR_ACCESS_DENIED:
-			// Watched directory was probably removed
-			w.sendEvent(watch.path, watch.mask&sysFSDELETESELF)
-			w.deleteWatch(watch)
-			w.startRead(watch)
-			continue
-		case syscall.ERROR_OPERATION_ABORTED:
-			// CancelIo was called on this handle
-			continue
-		default:
-			w.Errors <- os.NewSyscallError("GetQueuedCompletionPort", e)
-			continue
-		case nil:
-		}
-
-		var offset uint32
-		for {
-			if n == 0 {
-				w.Events <- newEvent("", sysFSQOVERFLOW)
-				w.Errors <- errors.New("short read in readEvents()")
-				break
-			}
-
-			// Point "raw" to the event in the buffer
-			raw := (*syscall.FileNotifyInformation)(unsafe.Pointer(&watch.buf[offset]))
-			buf := (*[syscall.MAX_PATH]uint16)(unsafe.Pointer(&raw.FileName))
-			name := syscall.UTF16ToString(buf[:raw.FileNameLength/2])
-			fullname := filepath.Join(watch.path, name)
-
-			var mask uint64
-			switch raw.Action {
-			case syscall.FILE_ACTION_REMOVED:
-				mask = sysFSDELETESELF
-			case syscall.FILE_ACTION_MODIFIED:
-				mask = sysFSMODIFY
-			case syscall.FILE_ACTION_RENAMED_OLD_NAME:
-				watch.rename = name
-			case syscall.FILE_ACTION_RENAMED_NEW_NAME:
-				if watch.names[watch.rename] != 0 {
-					watch.names[name] |= watch.names[watch.rename]
-					delete(watch.names, watch.rename)
-					mask = sysFSMOVESELF
-				}
-			}
-
-			sendNameEvent := func() {
-				if w.sendEvent(fullname, watch.names[name]&mask) {
-					if watch.names[name]&sysFSONESHOT != 0 {
-						delete(watch.names, name)
-					}
-				}
-			}
-			if raw.Action != syscall.FILE_ACTION_RENAMED_NEW_NAME {
-				sendNameEvent()
-			}
-			if raw.Action == syscall.FILE_ACTION_REMOVED {
-				w.sendEvent(fullname, watch.names[name]&sysFSIGNORED)
-				delete(watch.names, name)
-			}
-			if w.sendEvent(fullname, watch.mask&toFSnotifyFlags(raw.Action)) {
-				if watch.mask&sysFSONESHOT != 0 {
-					watch.mask = 0
-				}
-			}
-			if raw.Action == syscall.FILE_ACTION_RENAMED_NEW_NAME {
-				fullname = filepath.Join(watch.path, watch.rename)
-				sendNameEvent()
-			}
-
-			// Move to the next event in the buffer
-			if raw.NextEntryOffset == 0 {
-				break
-			}
-			offset += raw.NextEntryOffset
-
-			// Error!
-			if offset >= n {
-				w.Errors <- errors.New("Windows system assumed buffer larger than it is, events have likely been missed.")
-				break
-			}
-		}
-
-		if err := w.startRead(watch); err != nil {
-			w.Errors <- err
-		}
-	}
-}
-
-func (w *Watcher) sendEvent(name string, mask uint64) bool {
-	if mask == 0 {
-		return false
-	}
-	event := newEvent(name, uint32(mask))
-	select {
-	case ch := <-w.quit:
-		w.quit <- ch
-	case w.Events <- event:
-	}
-	return true
-}
-
-func toWindowsFlags(mask uint64) uint32 {
-	var m uint32
-	if mask&sysFSACCESS != 0 {
-		m |= syscall.FILE_NOTIFY_CHANGE_LAST_ACCESS
-	}
-	if mask&sysFSMODIFY != 0 {
-		m |= syscall.FILE_NOTIFY_CHANGE_LAST_WRITE
-	}
-	if mask&sysFSATTRIB != 0 {
-		m |= syscall.FILE_NOTIFY_CHANGE_ATTRIBUTES
-	}
-	if mask&(sysFSMOVE|sysFSCREATE|sysFSDELETE) != 0 {
-		m |= syscall.FILE_NOTIFY_CHANGE_FILE_NAME | syscall.FILE_NOTIFY_CHANGE_DIR_NAME
-	}
-	return m
-}
-
-func toFSnotifyFlags(action uint32) uint64 {
-	switch action {
-	case syscall.FILE_ACTION_ADDED:
-		return sysFSCREATE
-	case syscall.FILE_ACTION_REMOVED:
-		return sysFSDELETE
-	case syscall.FILE_ACTION_MODIFIED:
-		return sysFSMODIFY
-	case syscall.FILE_ACTION_RENAMED_OLD_NAME:
-		return sysFSMOVEDFROM
-	case syscall.FILE_ACTION_RENAMED_NEW_NAME:
-		return sysFSMOVEDTO
-	}
-	return 0
-}