Merge pull request #9425 from baude/basicnetworking

[CI:DOCS]basic networking guide

7 files changed, 296 insertions, 0 deletions

diff --git a/docs/source/Tutorials.rst b/docs/source/Tutorials.rst
index e3e869d5b..e48d1e853 100644
--- a/docs/source/Tutorials.rst
+++ b/docs/source/Tutorials.rst
@@ -11,3 +11,4 @@ Here are a number of useful tutorials to get you up and running with Podman. If
 * `Podman remote-client tutorial <https://github.com/containers/podman/blob/master/docs/tutorials/remote_client.md>`_: A brief how-to on using the Podman remote-client.
 * `How to use libpod for custom/derivative projects <https://github.com/containers/podman/blob/master/docs/tutorials/podman-derivative-api.md>`_: How the libpod API can be used within your own project.
 * `How to use Podman's Go bindings <https://github.com/containers/podman/blob/master/docs/tutorials/podman-go-bindings.md>`_: A brief how-to on using Podman's Go bindings in external applications.
+* `Common network setups <https://github.com/containers/podman/blob/master/docs/tutorials/basic_networking.md>`_: A basic guide to common network setups for Podman.
diff --git a/docs/tutorials/README.md b/docs/tutorials/README.md
index 246d235ee..455459062 100644
--- a/docs/tutorials/README.md
+++ b/docs/tutorials/README.md
@@ -31,3 +31,7 @@ Learn how to setup and use image signing with Podman.
 **[Go Bindings](podman-go-bindings.md)**
 
 A brief how-to on using Podman's Go bindings in external applications.
+
+**[Go Bindings](basic_networking.md)**
+
+A basic guide to common network setups with Podman
diff --git a/docs/tutorials/basic_networking.md b/docs/tutorials/basic_networking.md
new file mode 100644
index 000000000..7544c1cfd
--- /dev/null
+++ b/docs/tutorials/basic_networking.md
@@ -0,0 +1,291 @@
+![PODMAN logo](../../logo/podman-logo-source.svg)
+
+
+# Basic Networking Guide for Podman
+
+
+It seems once people master the basics of containers, networking is one of the first
+aspects they begin experimenting with.  And in regards to networking, it takes very
+little experimentation before ending up on the deep end of the pool.  The following
+guide shows the most common network setups for Podman rootfull and rootless containers.
+Each setup is supported with an example.
+
+
+## Differences between rootfull and rootless container networking
+
+One of the guiding factors on networking for containers with Podman is going to be
+whether or not the container is run by a root user or not.  This is because unprivileged
+users cannot create networking interfaces on the host.  Therefore, with rootfull
+containers, the default networking mode is to use the Container Network Interface
+(CNI) plugins and specifically the bridge plugin.  For rootless, the default network
+mode is slirp4netns. Because of the limited privileges, slirp4netns lacks some of
+the features of CNI networking; for example, slirp4netns cannot give containers a
+routable IP address.
+
+## Firewalls
+
+The role of a firewall will not impact the setup and configuration of networking,
+but it will impact traffic on those networks.  The most obvious is inbound network
+traffic to the container host, which is being passed onto containers usually with
+port mapping.  Depending on the firewall implementation, we have observed firewall
+ports being opened automatically due to running a container with a port mapping (for
+example).  If container traffic does not seem to work properly, check the firewall
+and allow traffic on ports the container is using. A common problem is that
+reloading the firewall deletes the cni iptables rules resulting in a loss of
+network connectivity for rootful containers. Podman v3 provides the podman
+network reload command to restore this without having to restart the container.
+
+## Basic Network Setups
+
+Most containers and pods being run with Podman adhere to a couple of simple scenarios.
+By default, rootfull Podman will create a bridged network.  This is the most straightforward
+and preferred network setup for Podman. Bridge networking creates an interface for
+the container on an internal bridge network, which is then connected to the internet
+via Network Address Translation(NAT).  We also see users wanting to use `macvlan`
+for networking as well. The `macvlan` plugin forwards an entire network interface
+from the host into the container, allowing it access to the network the host is connected
+to. And finally, the default network configuration for rootless containers is slirp4netns.
+The slirp4netns network mode has limited capabilities but can be run on users without
+root privileges. It creates a tunnel from the host into the container to forward
+traffic.
+
+### Bridge
+
+CNI defines a bridge network as where an internal network is created where both the
+container and host are attached.  Then this network is capable of allowing the containers
+to communicate outside of the host.
+
+
+![bridge_network](podman_bridge.png)
+
+Consider the above illustration.  It depicts a laptop user running two containers:
+a web and db instance.  These two containers are on the virtual network with the
+host.  Additionally, by default, these containers can initiate communications outside
+the laptop (to the Internet for example).  The containers on the virtual network
+typically have non-routable, also known as private IP addresses.
+
+When dealing with communication that is being initiated outside the host, the outside
+client typically must address the laptop’s external network interface and given port
+number.  Assuming the host allows incoming traffic, the host will know to forward
+the incoming traffic on that port to the specific container.  To accomplish this,
+firewall rules are added to forward traffic when a container requests a specific
+port be forwarded.
+
+Bridge networking is the default for Podman containers created as root. Podman provides
+a default bridge network, but you can create others using the `podman network create`
+command. Containers can be joined to a CNI network when they are created with the
+`--network` flag, or after they are created via the `podman network connect` and
+`podman network disconnect` commands.
+
+As mentioned earlier, slirp4netns is the default network configuration for rootless
+users.  But as of Podman version 3.0, rootless users can also use CNI networking.
+The user experience of rootless CNI is very akin to a rootfull CNI, except that
+there is no default network configuration provided.  You simply need to create a
+network, and the one will be created as a bridge network.
+
+```
+$ podman network create
+```
+
+When rootless containers are run with a CNI networking configuration, a “side-car”
+container for running CNI is also run. Do not remove this container while your rootless
+containers are running.  if you remove this container (e.g by accident) all attached
+containers lose network connectivity. In order to restore the network connectivity
+all containers with networks must be restarted. This will automatically recreate
+the "side-car" container. For rootfull containers, there is no “side-car” container
+as rootfull users have the permissions to create and modify network interfaces on
+the host.
+
+#### Example
+
+By default, rootfull containers use the CNI bridge plugin for its default configuration.
+In this case, no network name must be passed to Podman.  However, you can create
+additional bridged networks with the podman create command.  In that case, you will
+have to set the network name.
+
+The following example shows how to set up a web server and expose it to the network
+outside the host as both rootfull and rootless.  It will also show how an outside
+client can connect to the container.
+
+```
+(rootfull) $ sudo podman run -dt --name webserver -p 8080:80 quay.io/libpod/banner
+00f3440c7576aae2d5b193c40513c29c7964e96bf797cf0cc352c2b68ccbe66a
+```
+
+As mentioned earlier, for rootless containers using CNI, a network must first be
+created.
+```
+$ podman network create
+/home/baude/.config/cni/net.d/cni-podman1.conflist
+```
+Now run the container.
+```
+$ podman run -dt --name webserver --net cni-podman1 -p 8081:80 quay.io/libpod/banner
+269fd0d6b2c8ed60f2ca41d7beceec2471d72fb9a33aa8ca45b81dc9a0abbb12
+```
+Note in the above run command, the container’s port 80 (where the Nginx server is
+running) was mapped to the host’s port 8080.  Port 8080 was chosen to demonstrate
+how the host and container ports can be mapped for external access.  The port could
+very well have been 80 as well (except for rootless users).
+
+To connect from an outside client to the webserver, simply point an HTTP client to
+the host’s IP address at port 8080 for rootfull and port 8081 for rootless.
+```
+(outside_host): $ curl 192.168.99.109:8080
+   ___           __
+  / _ \___  ___/ /_ _  ___ ____
+ / ___/ _ \/ _  /  ' \/ _ `/ _ \
+/_/   \___/\_,_/_/_/_/\_,_/_//_/
+
+(outside_host): $ curl 192.168.99.109:8081
+   ___           __
+  / _ \___  ___/ /_ _  ___ ____
+ / ___/ _ \/ _  /  ' \/ _ `/ _ \
+/_/   \___/\_,_/_/_/_/\_,_/_//_/
+```
+
+### Macvlan
+
+With macvlan, the container is given access to a physical network interface on the
+host. This interface can configure multiple subinterfaces.  And each subinterface
+is capable of having its own MAC and IP address.  In the case of Podman containers,
+the container will present itself as if it is on the same network as the host.
+
+![macvlan_network](podman_bridge.png)
+
+In the illustration, outside clients will be able to access the web container by
+its IP address directly.  Usually the network information, including IP address,
+is leased from a DHCP server like most other network clients on the network.  If
+the laptop is running a firewall, such as firewalld, then accommodations will need
+to be made for proper access.
+
+#### Example
+
+The following example demonstrates how to set up a web container on a macvlan and
+how to access that container from outside the host.  First, create the macvlan network.
+ You need to know the network interface on the host that connects to the routable
+network.  In the example case, it is eth0.
+```
+$ sudo podman network create -d macvlan -o parent=eth0 webnetwork
+/etc/cni/net.d/webnetwork.conflist
+```
+The next step is to ensure that the DHCP CNI plugin is running.  This plugin facilitates
+the DHCP lease from the network.
+```
+$ sudo /usr/libexec/cni/dhcp daemon
+```
+Now run the container and be certain to attach it to the network we created earlier.
+```
+$ sudo podman run -dt --name webserver --network webnetwork quay.io/libpod/banner
+03d82083c434d7e937fc0b87c25401f46ab5050007df403bf988e25e52c5cc40
+[baude@localhost ~]$ sudo podman exec webserver ip address show eth0
+2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state
+UP
+link/ether 0a:3c:e2:eb:87:0f brd ff:ff:ff:ff:ff:ff
+inet 192.168.99.186/24 brd 192.168.99.255 scope global eth0
+valid_lft forever preferred_lft forever
+inet6 fe80::83c:e2ff:feeb:870f/64 scope link
+valid_lft forever preferred_lft forever
+```
+Because the container has a routable IP address (on this network) and is not being
+managed by firewalld, no change to the firewall is needed.
+```
+(outside_host): $ curl http://192.168.99.186
+   ___           __
+  / _ \___  ___/ /_ _  ___ ____
+ / ___/ _ \/ _  /  ' \/ _ `/ _ \
+/_/   \___/\_,_/_/_/_/\_,_/_//_/
+```
+
+
+
+### Slirp4netns
+
+Slirp4netns is the default network setup for rootless containers and pods.  It was
+invented because unprivileged users are not allowed to make network interfaces on
+the host.  Slirp4netns creates a TAP device in the container’s network namespace
+and connects to the usermode TCP/IP stack.  Consider the following illustration.
+
+![slirp_network](podman_rootless_default.png)
+
+The unprivileged user on this laptop has created two containers: a DB container and
+a web container.  Both of these containers have the ability to access content on
+networks outside the laptop.  And outside clients can access the containers if the
+container is bound to a host port and the laptop firewall allows it.  Remember, unprivileged
+users must use ports 1024 through 65535 as lower ports require root privileges. (CAP_NET_BIND_SERVICE)
+Note: this can be adjusted using the `sysctl net.ipv4.ip_unprivileged_port_start`
+
+One of the drawbacks of slirp4netns is that the containers are completely isolated
+from each other.  Unlike the bridge approach, there is no virtual network.  For containers
+to communicate with each other, they can use the port mappings with the host system,
+or they can be put into a Pod where they share the same network namespace. See [Communicating
+between containers and pods](#Communicating-between-containers-and-pods) for more information.
+
+#### Example
+
+The following example will show how two rootless containers can communicate with
+each other where one is a web server.  Then it will show how a client on the host’s
+network can communicate with the rootless web server.
+
+First, run the rootless web server and map port 80 from the container to a non-privileged
+port like 8080.
+```
+$ podman run -dt --name webserver -p 8080:80 quay.io/libpod/banner
+17ea33ccd7f55ff45766b3ec596b990a5f2ba66eb9159cb89748a85dc3cebfe0
+```
+Because rootfull containers cannot communicate with each other directly with TCP/IP
+via IP addresses, the host and the port mapping are used.  To do so, the IP address
+of the host (interface) must be known.
+```
+$ ip address show eth0
+3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group
+default qlen 1000
+link/ether 3c:e1:a1:c1:7a:3f brd ff:ff:ff:ff:ff:ff
+altname eth0
+inet 192.168.99.109/24 brd 192.168.99.255 scope global dynamic noprefixroute eth0
+valid_lft 78808sec preferred_lft 78808sec
+inet6 fe80::5632:6f10:9e76:c33/64 scope link noprefixroute
+valid_lft forever preferred_lft forever
+```
+From another rootless container, use the host’s IP address and port to communicate
+between the two rootless containers successfully.
+```
+$ podman run -it quay.io/libpod/banner curl http://192.168.99.109:8080
+   ___           __
+  / _ \___  ___/ /_ _  ___ ____
+ / ___/ _ \/ _  /  ' \/ _ `/ _ \
+/_/   \___/\_,_/_/_/_/\_,_/_//_/
+```
+
+From a client outside the host, the IP address and port can also be used:
+```
+(outside_host): $ curl http://192.168.99.109:8080
+   ___           __
+  / _ \___  ___/ /_ _  ___ ____
+ / ___/ _ \/ _  /  ' \/ _ `/ _ \
+/_/   \___/\_,_/_/_/_/\_,_/_//_/
+```
+
+## Communicating between containers and pods
+
+Most users of containers have a decent understanding of how containers communicate
+with each other and the rest of the world.  Usually each container has its own IP
+address and networking information.  They communicate amongst each other using regular
+TCP/IP means like IP addresses or, in many cases, using DNS names often based on
+the container name.  But pods are a collection of one or more containers, and with
+that, some uniqueness is inherited.
+
+By definition, all containers in a Podman pod share the same network namespace. This
+fact means that they will have the same IP address, MAC addresses, and port mappings.
+You can conveniently communicate between containers in a pod by using localhost.
+
+![slirp_network](podman_pod.png)
+
+The above illustration describes a Pod on a bridged network.  As depicted, the Pod
+has two containers “inside” it: a DB and a Web container.  Because they share the
+same network namespace, the DB and Web container can communicate with each other
+using localhost (127.0.0.1).  Furthermore, they are also both addressable by the
+IP address (and DNS name if applicable) assigned to the Pod itself.
+
+For more information on container to container networking, see Configuring container
+networking with Podman.
diff --git a/docs/tutorials/podman_bridge.png b/docs/tutorials/podman_bridge.png
new file mode 100644
index 000000000..c0cb88951
--- /dev/null
+++ b/docs/tutorials/podman_bridge.png
diff --git a/docs/tutorials/podman_macvlan.png b/docs/tutorials/podman_macvlan.png
new file mode 100644
index 000000000..04d9c9080
--- /dev/null
+++ b/docs/tutorials/podman_macvlan.png
diff --git a/docs/tutorials/podman_pod.png b/docs/tutorials/podman_pod.png
new file mode 100644
index 000000000..17718e20b
--- /dev/null
+++ b/docs/tutorials/podman_pod.png
diff --git a/docs/tutorials/podman_rootless_default.png b/docs/tutorials/podman_rootless_default.png
new file mode 100644
index 000000000..5d4a66644
--- /dev/null
+++ b/docs/tutorials/podman_rootless_default.png