System test cleanup

- cp test: clean up stray image

- build test: add workaround for #9567 (ultra-slow ubuntu).
  We're seeing CI flakes (timeouts) due to ubuntu 2004 being
  absurdly slow. Workaround: double our timeout on one specific
  test when ubuntu + remote.

- build test: clean up new copy-from test (from #9275).
  The test was copy-pasted from buildah system tests, without
  really adapting for podman environment (e.g. it was using
  images that we don't use here, and would cause pulls, which
  will cause flakes). Rewrite test so it references only $IMAGE,
  remove some confusing/unnecessary stuff, selectively run
  parts of it even when rootless or remote, and add a
  test to confirm that copy-from succeeded.

- load test: add error-message test to new load-invalid (#9672).
  Basically, make sure the command fails for the right reason.

- play test (kube): use $IMAGE, not alpine; and add pause-image
  cleanup to teardown()

- apiv2 mounts test: add a maintainability comment in a tricky
  section of code; and tighten up the mount point test.

Signed-off-by: Ed Santiago <santiago@redhat.com>

4 files changed, 71 insertions, 18 deletions

diff --git a/test/system/065-cp.bats b/test/system/065-cp.bats
index 73e807843..679cdc209 100644
--- a/test/system/065-cp.bats
+++ b/test/system/065-cp.bats
@@ -370,6 +370,7 @@ load helpers
     is "${lines[0]}" "${randomcontent[0]}" "eval symlink - created container"
     is "${lines[1]}" "${randomcontent[1]}" "eval symlink - created container"
     run_podman rm -f cpcontainer
+    run_podman rmi $cpimage
 }
 
 
diff --git a/test/system/070-build.bats b/test/system/070-build.bats
index d413b0c10..8f6cdb46b 100644
--- a/test/system/070-build.bats
+++ b/test/system/070-build.bats
@@ -241,11 +241,21 @@ EOF
         build_arg_implicit+="=$arg_implicit_value"
     fi
 
+    # FIXME FIXME FIXME: 2021-03-15: workaround for #9567 (slow ubuntu 2004):
+    # we're seeing lots of timeouts in CI. Until/unless #9567 gets fixed,
+    # let's get CI passing by extending the timeout when remote on ubuntu
+    local localtimeout=${PODMAN_TIMEOUT}
+    if is_remote; then
+        if grep -qi ubuntu /etc/os-release; then
+            localtimeout=$(( 2 * $localtimeout ))
+        fi
+    fi
+
     # cd to the dir, so we test relative paths (important for podman-remote)
     cd $PODMAN_TMPDIR
     export arg_explicit="THIS SHOULD BE OVERRIDDEN BY COMMAND LINE!"
     export arg_implicit=${arg_implicit_value}
-    run_podman ${MOUNTS_CONF} build \
+    PODMAN_TIMEOUT=$localtimeout run_podman ${MOUNTS_CONF} build \
                --build-arg arg_explicit=${arg_explicit_value} \
                $build_arg_implicit \
                --dns-search $nosuchdomain \
@@ -594,34 +604,46 @@ EOF
     run_podman rmi -a --force
 }
 
+# Caveat lector: this test was mostly copy-pasted from buildah in #9275.
+# It's not entirely clear what it's testing, or if the 'mount' section is
+# necessary.
 @test "build with copy-from referencing the base image" {
-  skip_if_rootless "cannot mount as rootless"
-  target=busybox-derived
-  target_mt=busybox-mt-derived
+  target=derived
+  target_mt=derived-mt
   tmpdir=$PODMAN_TMPDIR/build-test
   mkdir -p $tmpdir
+
   containerfile1=$tmpdir/Containerfile1
-    cat >$containerfile1 <<EOF
-FROM quay.io/libpod/busybox AS build
-RUN rm -f /bin/paste
+  cat >$containerfile1 <<EOF
+FROM $IMAGE AS build
+RUN rm -f /etc/issue
 USER 1001
-COPY --from=quay.io/libpod/busybox /bin/paste /test/
+COPY --from=$IMAGE /etc/issue /test/
 EOF
+
   containerfile2=$tmpdir/Containerfile2
-    cat >$containerfile2 <<EOF
-FROM quay.io/libpod/busybox AS test
-RUN rm -f /bin/nl
+  cat >$containerfile2 <<EOF
+FROM $IMAGE AS test
+RUN rm -f /etc/alpine-release
 FROM quay.io/libpod/alpine AS final
-COPY --from=quay.io/libpod/busybox /bin/nl /test/
+COPY --from=$IMAGE /etc/alpine-release /test/
 EOF
-  run_podman build -t ${target} -f ${containerfile1} ${tmpdir}
-  run_podman build --jobs 4 -t ${target} -f ${containerfile1} ${tmpdir}
 
-  run_podman build -t ${target} -f ${containerfile2} ${tmpdir}
+  # Before the build, $IMAGE's base image should not be present
+  local base_image=quay.io/libpod/alpine:latest
+  run_podman 1 image exists $base_image
+
+  run_podman build --jobs 1 -t ${target} -f ${containerfile2} ${tmpdir}
   run_podman build --no-cache --jobs 4 -t ${target_mt} -f ${containerfile2} ${tmpdir}
 
+  # After the build, the base image should exist
+  run_podman image exists $base_image
+
   # (can only test locally; podman-remote has no image mount command)
-  if ! is_remote; then
+  # (can also only test as root; mounting under rootless podman is too hard)
+  # We perform the test as a conditional, not a 'skip', because there's
+  # value in testing the above 'build' commands even remote & rootless.
+  if ! is_remote && ! is_rootless; then
     run_podman image mount ${target}
     root_single_job=$output
 
@@ -629,8 +651,21 @@ EOF
     root_multi_job=$output
 
     # Check that both the version with --jobs 1 and --jobs=N have the same number of files
-    test $(find $root_single_job -type f | wc -l) = $(find $root_multi_job -type f | wc -l)
+    nfiles_single=$(find $root_single_job -type f | wc -l)
+    nfiles_multi=$(find $root_multi_job -type f | wc -l)
+    run_podman image umount ${target_mt}
+    run_podman image umount ${target}
+
+    is "$nfiles_single" "$nfiles_multi" \
+       "Number of files (--jobs=1) == (--jobs=4)"
+
+    # Make sure the number is reasonable
+    test "$nfiles_single" -gt 50
   fi
+
+  # Clean up
+  run_podman rmi ${target_mt} ${target} ${base_image}
+  run_podman image prune -f
 }
 
 @test "podman build --logfile test" {
diff --git a/test/system/120-load.bats b/test/system/120-load.bats
index 936449bdb..95113c4a6 100644
--- a/test/system/120-load.bats
+++ b/test/system/120-load.bats
@@ -31,6 +31,9 @@ verify_iid_and_name() {
     invalid=$PODMAN_TMPDIR/invalid
     echo "I am an invalid file and should cause a podman-load error" > $invalid
     run_podman 125 load -i $invalid
+    # podman and podman-remote emit different messages; this is a common string
+    is "$output" ".*error pulling image: unable to pull .*" \
+       "load -i INVALID fails with expected diagnostic"
 }
 
 @test "podman save to pipe and load" {
diff --git a/test/system/700-play.bats b/test/system/700-play.bats
index e7904f59f..8fa96741c 100644
--- a/test/system/700-play.bats
+++ b/test/system/700-play.bats
@@ -5,6 +5,20 @@
 
 load helpers
 
+# This is a long ugly way to clean up pods and remove the pause image
+function teardown() {
+    run_podman pod rm -f -a
+    run_podman rm -f -a
+    run_podman image list --format '{{.ID}} {{.Repository}}'
+    while read id name; do
+        if [[ "$name" =~ /pause ]]; then
+            run_podman rmi $id
+        fi
+    done <<<"$output"
+
+    basic_teardown
+}
+
 testYaml="
 apiVersion: v1
 kind: Pod
@@ -24,7 +38,7 @@ spec:
       value: xterm
     - name: container
       value: podman
-    image: quay.io/libpod/alpine:latest
+    image: $IMAGE
     name: test
     resources: {}
     securityContext: