Merge pull request #12384 from containers/dependabot/go_modules/github.com/containers/image/v5-5.17.0

Bump github.com/containers/image/v5 from 5.16.1 to 5.17.0

13 files changed, 0 insertions, 1654 deletions

diff --git a/vendor/github.com/juju/ansiterm/LICENSE b/vendor/github.com/juju/ansiterm/LICENSE
deleted file mode 100644
index ade9307b3..000000000
--- a/vendor/github.com/juju/ansiterm/LICENSE
+++ /dev/null
@@ -1,191 +0,0 @@
-All files in this repository are licensed as follows. If you contribute
-to this repository, it is assumed that you license your contribution
-under the same license unless you state otherwise.
-
-All files Copyright (C) 2015 Canonical Ltd. unless otherwise specified in the file.
-
-This software is licensed under the LGPLv3, included below.
-
-As a special exception to the GNU Lesser General Public License version 3
-("LGPL3"), the copyright holders of this Library give you permission to
-convey to a third party a Combined Work that links statically or dynamically
-to this Library without providing any Minimal Corresponding Source or
-Minimal Application Code as set out in 4d or providing the installation
-information set out in section 4e, provided that you comply with the other
-provisions of LGPL3 and provided that you meet, for the Application the
-terms and conditions of the license(s) which apply to the Application.
-
-Except as stated in this special exception, the provisions of LGPL3 will
-continue to comply in full to this Library. If you modify this Library, you
-may apply this exception to your version of this Library, but you are not
-obliged to do so. If you do not wish to do so, delete this exception
-statement from your version. This exception does not (and cannot) modify any
-license terms which apply to the Application, with which you must still
-comply.
-
-
-                   GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-  This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
-  0. Additional Definitions.
-
-  As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
-  "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
-  An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
-  A "Combined Work" is a work produced by combining or linking an
-Application with the Library.  The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
-  The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
-  The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
-  1. Exception to Section 3 of the GNU GPL.
-
-  You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
-  2. Conveying Modified Versions.
-
-  If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
-   a) under this License, provided that you make a good faith effort to
-   ensure that, in the event an Application does not supply the
-   function or data, the facility still operates, and performs
-   whatever part of its purpose remains meaningful, or
-
-   b) under the GNU GPL, with none of the additional permissions of
-   this License applicable to that copy.
-
-  3. Object Code Incorporating Material from Library Header Files.
-
-  The object code form of an Application may incorporate material from
-a header file that is part of the Library.  You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
-   a) Give prominent notice with each copy of the object code that the
-   Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the object code with a copy of the GNU GPL and this license
-   document.
-
-  4. Combined Works.
-
-  You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
-   a) Give prominent notice with each copy of the Combined Work that
-   the Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the Combined Work with a copy of the GNU GPL and this license
-   document.
-
-   c) For a Combined Work that displays copyright notices during
-   execution, include the copyright notice for the Library among
-   these notices, as well as a reference directing the user to the
-   copies of the GNU GPL and this license document.
-
-   d) Do one of the following:
-
-       0) Convey the Minimal Corresponding Source under the terms of this
-       License, and the Corresponding Application Code in a form
-       suitable for, and under terms that permit, the user to
-       recombine or relink the Application with a modified version of
-       the Linked Version to produce a modified Combined Work, in the
-       manner specified by section 6 of the GNU GPL for conveying
-       Corresponding Source.
-
-       1) Use a suitable shared library mechanism for linking with the
-       Library.  A suitable mechanism is one that (a) uses at run time
-       a copy of the Library already present on the user's computer
-       system, and (b) will operate properly with a modified version
-       of the Library that is interface-compatible with the Linked
-       Version.
-
-   e) Provide Installation Information, but only if you would otherwise
-   be required to provide such information under section 6 of the
-   GNU GPL, and only to the extent that such information is
-   necessary to install and execute a modified version of the
-   Combined Work produced by recombining or relinking the
-   Application with a modified version of the Linked Version. (If
-   you use option 4d0, the Installation Information must accompany
-   the Minimal Corresponding Source and Corresponding Application
-   Code. If you use option 4d1, you must provide the Installation
-   Information in the manner specified by section 6 of the GNU GPL
-   for conveying Corresponding Source.)
-
-  5. Combined Libraries.
-
-  You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
-   a) Accompany the combined library with a copy of the same work based
-   on the Library, uncombined with any other library facilities,
-   conveyed under the terms of this License.
-
-   b) Give prominent notice with the combined library that part of it
-   is a work based on the Library, and explaining where to find the
-   accompanying uncombined form of the same work.
-
-  6. Revised Versions of the GNU Lesser General Public License.
-
-  The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
-  Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
-  If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.
diff --git a/vendor/github.com/juju/ansiterm/Makefile b/vendor/github.com/juju/ansiterm/Makefile
deleted file mode 100644
index 212fdcbe5..000000000
--- a/vendor/github.com/juju/ansiterm/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# Copyright 2016 Canonical Ltd.
-# Licensed under the LGPLv3, see LICENCE file for details.
-
-default: check
-
-check:
-	go test
-
-docs:
-	godoc2md github.com/juju/ansiterm > README.md
-	sed -i 's|\[godoc-link-here\]|[![GoDoc](https://godoc.org/github.com/juju/ansiterm?status.svg)](https://godoc.org/github.com/juju/ansiterm)|' README.md 
-
-
-.PHONY: default check docs
diff --git a/vendor/github.com/juju/ansiterm/README.md b/vendor/github.com/juju/ansiterm/README.md
deleted file mode 100644
index 567438721..000000000
--- a/vendor/github.com/juju/ansiterm/README.md
+++ /dev/null
@@ -1,323 +0,0 @@
-
-# ansiterm
-    import "github.com/juju/ansiterm"
-
-Package ansiterm provides a Writer that writes out the ANSI escape
-codes for color and styles.
-
-
-
-
-
-
-
-## type Color
-``` go
-type Color int
-```
-Color represents one of the standard 16 ANSI colors.
-
-
-
-``` go
-const (
-    Default Color
-    Black
-    Red
-    Green
-    Yellow
-    Blue
-    Magenta
-    Cyan
-    Gray
-    DarkGray
-    BrightRed
-    BrightGreen
-    BrightYellow
-    BrightBlue
-    BrightMagenta
-    BrightCyan
-    White
-)
-```
-
-
-
-
-
-
-
-
-### func (Color) String
-``` go
-func (c Color) String() string
-```
-String returns the name of the color.
-
-
-
-## type Context
-``` go
-type Context struct {
-    Foreground Color
-    Background Color
-    Styles     []Style
-}
-```
-Context provides a way to specify both foreground and background colors
-along with other styles and write text to a Writer with those colors and
-styles.
-
-
-
-
-
-
-
-
-
-### func Background
-``` go
-func Background(color Color) *Context
-```
-Background is a convenience function that creates a Context with the
-specified color as the background color.
-
-
-### func Foreground
-``` go
-func Foreground(color Color) *Context
-```
-Foreground is a convenience function that creates a Context with the
-specified color as the foreground color.
-
-
-### func Styles
-``` go
-func Styles(styles ...Style) *Context
-```
-Styles is a convenience function that creates a Context with the
-specified styles set.
-
-
-
-
-### func (\*Context) Fprint
-``` go
-func (c *Context) Fprint(w sgrWriter, args ...interface{})
-```
-Fprint will set the sgr values of the writer to the specified foreground,
-background and styles, then formats using the default formats for its
-operands and writes to w. Spaces are added between operands when neither is
-a string. It returns the number of bytes written and any write error
-encountered.
-
-
-
-### func (\*Context) Fprintf
-``` go
-func (c *Context) Fprintf(w sgrWriter, format string, args ...interface{})
-```
-Fprintf will set the sgr values of the writer to the specified
-foreground, background and styles, then write the formatted string,
-then reset the writer.
-
-
-
-### func (\*Context) SetBackground
-``` go
-func (c *Context) SetBackground(color Color) *Context
-```
-SetBackground sets the background to the specified color.
-
-
-
-### func (\*Context) SetForeground
-``` go
-func (c *Context) SetForeground(color Color) *Context
-```
-SetForeground sets the foreground to the specified color.
-
-
-
-### func (\*Context) SetStyle
-``` go
-func (c *Context) SetStyle(styles ...Style) *Context
-```
-SetStyle replaces the styles with the new values.
-
-
-
-## type Style
-``` go
-type Style int
-```
-
-
-``` go
-const (
-    Bold Style
-    Faint
-    Italic
-    Underline
-    Blink
-    Reverse
-    Strikethrough
-    Conceal
-)
-```
-
-
-
-
-
-
-
-
-### func (Style) String
-``` go
-func (s Style) String() string
-```
-
-
-## type TabWriter
-``` go
-type TabWriter struct {
-    Writer
-    // contains filtered or unexported fields
-}
-```
-TabWriter is a filter that inserts padding around tab-delimited
-columns in its input to align them in the output.
-
-It also setting of colors and styles over and above the standard
-tabwriter package.
-
-
-
-
-
-
-
-
-
-### func NewTabWriter
-``` go
-func NewTabWriter(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter
-```
-NewTabWriter returns a writer that is able to set colors and styels.
-The ansi escape codes are stripped for width calculations.
-
-
-
-
-### func (\*TabWriter) Flush
-``` go
-func (t *TabWriter) Flush() error
-```
-Flush should be called after the last call to Write to ensure
-that any data buffered in the Writer is written to output. Any
-incomplete escape sequence at the end is considered
-complete for formatting purposes.
-
-
-
-### func (\*TabWriter) Init
-``` go
-func (t *TabWriter) Init(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter
-```
-A Writer must be initialized with a call to Init. The first parameter (output)
-specifies the filter output. The remaining parameters control the formatting:
-
-
-	minwidth	minimal cell width including any padding
-	tabwidth	width of tab characters (equivalent number of spaces)
-	padding		padding added to a cell before computing its width
-	padchar		ASCII char used for padding
-			if padchar == '\t', the Writer will assume that the
-			width of a '\t' in the formatted output is tabwidth,
-			and cells are left-aligned independent of align_left
-			(for correct-looking results, tabwidth must correspond
-			to the tab width in the viewer displaying the result)
-	flags		formatting control
-
-
-
-## type Writer
-``` go
-type Writer struct {
-    io.Writer
-    // contains filtered or unexported fields
-}
-```
-Writer allows colors and styles to be specified. If the io.Writer
-is not a terminal capable of color, all attempts to set colors or
-styles are no-ops.
-
-
-
-
-
-
-
-
-
-### func NewWriter
-``` go
-func NewWriter(w io.Writer) *Writer
-```
-NewWriter returns a Writer that allows the caller to specify colors and
-styles. If the io.Writer is not a terminal capable of color, all attempts
-to set colors or styles are no-ops.
-
-
-
-
-### func (\*Writer) ClearStyle
-``` go
-func (w *Writer) ClearStyle(s Style)
-```
-ClearStyle clears the text style.
-
-
-
-### func (\*Writer) Reset
-``` go
-func (w *Writer) Reset()
-```
-Reset returns the default foreground and background colors with no styles.
-
-
-
-### func (\*Writer) SetBackground
-``` go
-func (w *Writer) SetBackground(c Color)
-```
-SetBackground sets the background color.
-
-
-
-### func (\*Writer) SetForeground
-``` go
-func (w *Writer) SetForeground(c Color)
-```
-SetForeground sets the foreground color.
-
-
-
-### func (\*Writer) SetStyle
-``` go
-func (w *Writer) SetStyle(s Style)
-```
-SetStyle sets the text style.
-
-
-
-
-
-
-
-
-
-- - -
-Generated by [godoc2md](http://godoc.org/github.com/davecheney/godoc2md)
\ No newline at end of file
diff --git a/vendor/github.com/juju/ansiterm/attribute.go b/vendor/github.com/juju/ansiterm/attribute.go
deleted file mode 100644
index f2daa4813..000000000
--- a/vendor/github.com/juju/ansiterm/attribute.go
+++ /dev/null
@@ -1,50 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-import (
-	"fmt"
-	"sort"
-	"strings"
-)
-
-type attribute int
-
-const (
-	unknownAttribute attribute = -1
-	reset            attribute = 0
-)
-
-// sgr returns the escape sequence for the Select Graphic Rendition
-// for the attribute.
-func (a attribute) sgr() string {
-	if a < 0 {
-		return ""
-	}
-	return fmt.Sprintf("\x1b[%dm", a)
-}
-
-type attributes []attribute
-
-func (a attributes) Len() int           { return len(a) }
-func (a attributes) Less(i, j int) bool { return a[i] < a[j] }
-func (a attributes) Swap(i, j int)      { a[i], a[j] = a[j], a[i] }
-
-// sgr returns the combined escape sequence for the Select Graphic Rendition
-// for the sequence of attributes.
-func (a attributes) sgr() string {
-	switch len(a) {
-	case 0:
-		return ""
-	case 1:
-		return a[0].sgr()
-	default:
-		sort.Sort(a)
-		var values []string
-		for _, attr := range a {
-			values = append(values, fmt.Sprint(attr))
-		}
-		return fmt.Sprintf("\x1b[%sm", strings.Join(values, ";"))
-	}
-}
diff --git a/vendor/github.com/juju/ansiterm/color.go b/vendor/github.com/juju/ansiterm/color.go
deleted file mode 100644
index 0a97de31e..000000000
--- a/vendor/github.com/juju/ansiterm/color.go
+++ /dev/null
@@ -1,119 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-const (
-	_ Color = iota
-	Default
-	Black
-	Red
-	Green
-	Yellow
-	Blue
-	Magenta
-	Cyan
-	Gray
-	DarkGray
-	BrightRed
-	BrightGreen
-	BrightYellow
-	BrightBlue
-	BrightMagenta
-	BrightCyan
-	White
-)
-
-// Color represents one of the standard 16 ANSI colors.
-type Color int
-
-// String returns the name of the color.
-func (c Color) String() string {
-	switch c {
-	case Default:
-		return "default"
-	case Black:
-		return "black"
-	case Red:
-		return "red"
-	case Green:
-		return "green"
-	case Yellow:
-		return "yellow"
-	case Blue:
-		return "blue"
-	case Magenta:
-		return "magenta"
-	case Cyan:
-		return "cyan"
-	case Gray:
-		return "gray"
-	case DarkGray:
-		return "darkgray"
-	case BrightRed:
-		return "brightred"
-	case BrightGreen:
-		return "brightgreen"
-	case BrightYellow:
-		return "brightyellow"
-	case BrightBlue:
-		return "brightblue"
-	case BrightMagenta:
-		return "brightmagenta"
-	case BrightCyan:
-		return "brightcyan"
-	case White:
-		return "white"
-	default:
-		return ""
-	}
-}
-
-func (c Color) foreground() attribute {
-	switch c {
-	case Default:
-		return 39
-	case Black:
-		return 30
-	case Red:
-		return 31
-	case Green:
-		return 32
-	case Yellow:
-		return 33
-	case Blue:
-		return 34
-	case Magenta:
-		return 35
-	case Cyan:
-		return 36
-	case Gray:
-		return 37
-	case DarkGray:
-		return 90
-	case BrightRed:
-		return 91
-	case BrightGreen:
-		return 92
-	case BrightYellow:
-		return 93
-	case BrightBlue:
-		return 94
-	case BrightMagenta:
-		return 95
-	case BrightCyan:
-		return 96
-	case White:
-		return 97
-	default:
-		return unknownAttribute
-	}
-}
-
-func (c Color) background() attribute {
-	value := c.foreground()
-	if value != unknownAttribute {
-		return value + 10
-	}
-	return value
-}
diff --git a/vendor/github.com/juju/ansiterm/context.go b/vendor/github.com/juju/ansiterm/context.go
deleted file mode 100644
index e61a867ff..000000000
--- a/vendor/github.com/juju/ansiterm/context.go
+++ /dev/null
@@ -1,95 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-import (
-	"fmt"
-	"io"
-)
-
-// Context provides a way to specify both foreground and background colors
-// along with other styles and write text to a Writer with those colors and
-// styles.
-type Context struct {
-	Foreground Color
-	Background Color
-	Styles     []Style
-}
-
-// Foreground is a convenience function that creates a Context with the
-// specified color as the foreground color.
-func Foreground(color Color) *Context {
-	return &Context{Foreground: color}
-}
-
-// Background is a convenience function that creates a Context with the
-// specified color as the background color.
-func Background(color Color) *Context {
-	return &Context{Background: color}
-}
-
-// Styles is a convenience function that creates a Context with the
-// specified styles set.
-func Styles(styles ...Style) *Context {
-	return &Context{Styles: styles}
-}
-
-// SetForeground sets the foreground to the specified color.
-func (c *Context) SetForeground(color Color) *Context {
-	c.Foreground = color
-	return c
-}
-
-// SetBackground sets the background to the specified color.
-func (c *Context) SetBackground(color Color) *Context {
-	c.Background = color
-	return c
-}
-
-// SetStyle replaces the styles with the new values.
-func (c *Context) SetStyle(styles ...Style) *Context {
-	c.Styles = styles
-	return c
-}
-
-type sgrWriter interface {
-	io.Writer
-	writeSGR(value sgr)
-}
-
-// Fprintf will set the sgr values of the writer to the specified
-// foreground, background and styles, then write the formatted string,
-// then reset the writer.
-func (c *Context) Fprintf(w sgrWriter, format string, args ...interface{}) {
-	w.writeSGR(c)
-	fmt.Fprintf(w, format, args...)
-	w.writeSGR(reset)
-}
-
-// Fprint will set the sgr values of the writer to the specified foreground,
-// background and styles, then formats using the default formats for its
-// operands and writes to w. Spaces are added between operands when neither is
-// a string. It returns the number of bytes written and any write error
-// encountered.
-func (c *Context) Fprint(w sgrWriter, args ...interface{}) {
-	w.writeSGR(c)
-	fmt.Fprint(w, args...)
-	w.writeSGR(reset)
-}
-
-func (c *Context) sgr() string {
-	var values attributes
-	if foreground := c.Foreground.foreground(); foreground != unknownAttribute {
-		values = append(values, foreground)
-	}
-	if background := c.Background.background(); background != unknownAttribute {
-		values = append(values, background)
-	}
-	for _, style := range c.Styles {
-		if value := style.enable(); value != unknownAttribute {
-			values = append(values, value)
-		}
-	}
-	return values.sgr()
-}
diff --git a/vendor/github.com/juju/ansiterm/doc.go b/vendor/github.com/juju/ansiterm/doc.go
deleted file mode 100644
index 782700779..000000000
--- a/vendor/github.com/juju/ansiterm/doc.go
+++ /dev/null
@@ -1,6 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-// Package ansiterm provides a Writer that writes out the ANSI escape
-// codes for color and styles.
-package ansiterm
diff --git a/vendor/github.com/juju/ansiterm/style.go b/vendor/github.com/juju/ansiterm/style.go
deleted file mode 100644
index 0be42da56..000000000
--- a/vendor/github.com/juju/ansiterm/style.go
+++ /dev/null
@@ -1,72 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-const (
-	_ Style = iota
-	Bold
-	Faint
-	Italic
-	Underline
-	Blink
-	Reverse
-	Strikethrough
-	Conceal
-)
-
-type Style int
-
-func (s Style) String() string {
-	switch s {
-	case Bold:
-		return "bold"
-	case Faint:
-		return "faint"
-	case Italic:
-		return "italic"
-	case Underline:
-		return "underline"
-	case Blink:
-		return "blink"
-	case Reverse:
-		return "reverse"
-	case Strikethrough:
-		return "strikethrough"
-	case Conceal:
-		return "conceal"
-	default:
-		return ""
-	}
-}
-
-func (s Style) enable() attribute {
-	switch s {
-	case Bold:
-		return 1
-	case Faint:
-		return 2
-	case Italic:
-		return 3
-	case Underline:
-		return 4
-	case Blink:
-		return 5
-	case Reverse:
-		return 7
-	case Conceal:
-		return 8
-	case Strikethrough:
-		return 9
-	default:
-		return unknownAttribute
-	}
-}
-
-func (s Style) disable() attribute {
-	value := s.enable()
-	if value != unknownAttribute {
-		return value + 20
-	}
-	return value
-}
diff --git a/vendor/github.com/juju/ansiterm/tabwriter.go b/vendor/github.com/juju/ansiterm/tabwriter.go
deleted file mode 100644
index 1ff6faaaf..000000000
--- a/vendor/github.com/juju/ansiterm/tabwriter.go
+++ /dev/null
@@ -1,64 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-import (
-	"io"
-
-	"github.com/juju/ansiterm/tabwriter"
-)
-
-// NewTabWriter returns a writer that is able to set colors and styels.
-// The ansi escape codes are stripped for width calculations.
-func NewTabWriter(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter {
-	return new(TabWriter).Init(output, minwidth, tabwidth, padding, padchar, flags)
-}
-
-// TabWriter is a filter that inserts padding around tab-delimited
-// columns in its input to align them in the output.
-//
-// It also setting of colors and styles over and above the standard
-// tabwriter package.
-type TabWriter struct {
-	Writer
-	tw tabwriter.Writer
-}
-
-// Flush should be called after the last call to Write to ensure
-// that any data buffered in the Writer is written to output. Any
-// incomplete escape sequence at the end is considered
-// complete for formatting purposes.
-//
-func (t *TabWriter) Flush() error {
-	return t.tw.Flush()
-}
-
-// SetColumnAlignRight will mark a particular column as align right.
-// This is reset on the next flush.
-func (t *TabWriter) SetColumnAlignRight(column int) {
-	t.tw.SetColumnAlignRight(column)
-}
-
-// A Writer must be initialized with a call to Init. The first parameter (output)
-// specifies the filter output. The remaining parameters control the formatting:
-//
-//	minwidth	minimal cell width including any padding
-//	tabwidth	width of tab characters (equivalent number of spaces)
-//	padding		padding added to a cell before computing its width
-//	padchar		ASCII char used for padding
-//			if padchar == '\t', the Writer will assume that the
-//			width of a '\t' in the formatted output is tabwidth,
-//			and cells are left-aligned independent of align_left
-//			(for correct-looking results, tabwidth must correspond
-//			to the tab width in the viewer displaying the result)
-//	flags		formatting control
-//
-func (t *TabWriter) Init(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter {
-	writer, colorCapable := colorEnabledWriter(output)
-	t.Writer = Writer{
-		Writer:  t.tw.Init(writer, minwidth, tabwidth, padding, padchar, flags),
-		noColor: !colorCapable,
-	}
-	return t
-}
diff --git a/vendor/github.com/juju/ansiterm/tabwriter/LICENSE b/vendor/github.com/juju/ansiterm/tabwriter/LICENSE
deleted file mode 100644
index 744875676..000000000
--- a/vendor/github.com/juju/ansiterm/tabwriter/LICENSE
+++ /dev/null
@@ -1,27 +0,0 @@
-Copyright (c) 2012 The Go Authors. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-   * Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-   * Redistributions in binary form must reproduce the above
-copyright notice, this list of conditions and the following disclaimer
-in the documentation and/or other materials provided with the
-distribution.
-   * Neither the name of Google Inc. nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go b/vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go
deleted file mode 100644
index 98949d036..000000000
--- a/vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go
+++ /dev/null
@@ -1,587 +0,0 @@
-// Copyright 2009 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// This file is mostly a copy of the go standard library text/tabwriter. With
-// the additional stripping of ansi control characters for width calculations.
-
-// Package tabwriter implements a write filter (tabwriter.Writer) that
-// translates tabbed columns in input into properly aligned text.
-//
-// The package is using the Elastic Tabstops algorithm described at
-// http://nickgravgaard.com/elastictabstops/index.html.
-//
-package tabwriter
-
-import (
-	"bytes"
-	"io"
-	"unicode/utf8"
-
-	"github.com/lunixbochs/vtclean"
-)
-
-// ----------------------------------------------------------------------------
-// Filter implementation
-
-// A cell represents a segment of text terminated by tabs or line breaks.
-// The text itself is stored in a separate buffer; cell only describes the
-// segment's size in bytes, its width in runes, and whether it's an htab
-// ('\t') terminated cell.
-//
-type cell struct {
-	size  int  // cell size in bytes
-	width int  // cell width in runes
-	htab  bool // true if the cell is terminated by an htab ('\t')
-}
-
-// A Writer is a filter that inserts padding around tab-delimited
-// columns in its input to align them in the output.
-//
-// The Writer treats incoming bytes as UTF-8 encoded text consisting
-// of cells terminated by (horizontal or vertical) tabs or line
-// breaks (newline or formfeed characters). Cells in adjacent lines
-// constitute a column. The Writer inserts padding as needed to
-// make all cells in a column have the same width, effectively
-// aligning the columns. It assumes that all characters have the
-// same width except for tabs for which a tabwidth must be specified.
-// Note that cells are tab-terminated, not tab-separated: trailing
-// non-tab text at the end of a line does not form a column cell.
-//
-// The Writer assumes that all Unicode code points have the same width;
-// this may not be true in some fonts.
-//
-// If DiscardEmptyColumns is set, empty columns that are terminated
-// entirely by vertical (or "soft") tabs are discarded. Columns
-// terminated by horizontal (or "hard") tabs are not affected by
-// this flag.
-//
-// If a Writer is configured to filter HTML, HTML tags and entities
-// are passed through. The widths of tags and entities are
-// assumed to be zero (tags) and one (entities) for formatting purposes.
-//
-// A segment of text may be escaped by bracketing it with Escape
-// characters. The tabwriter passes escaped text segments through
-// unchanged. In particular, it does not interpret any tabs or line
-// breaks within the segment. If the StripEscape flag is set, the
-// Escape characters are stripped from the output; otherwise they
-// are passed through as well. For the purpose of formatting, the
-// width of the escaped text is always computed excluding the Escape
-// characters.
-//
-// The formfeed character ('\f') acts like a newline but it also
-// terminates all columns in the current line (effectively calling
-// Flush). Cells in the next line start new columns. Unless found
-// inside an HTML tag or inside an escaped text segment, formfeed
-// characters appear as newlines in the output.
-//
-// The Writer must buffer input internally, because proper spacing
-// of one line may depend on the cells in future lines. Clients must
-// call Flush when done calling Write.
-//
-type Writer struct {
-	// configuration
-	output   io.Writer
-	minwidth int
-	tabwidth int
-	padding  int
-	padbytes [8]byte
-	flags    uint
-
-	// current state
-	buf       bytes.Buffer // collected text excluding tabs or line breaks
-	pos       int          // buffer position up to which cell.width of incomplete cell has been computed
-	cell      cell         // current incomplete cell; cell.width is up to buf[pos] excluding ignored sections
-	endChar   byte         // terminating char of escaped sequence (Escape for escapes, '>', ';' for HTML tags/entities, or 0)
-	lines     [][]cell     // list of lines; each line is a list of cells
-	widths    []int        // list of column widths in runes - re-used during formatting
-	alignment map[int]uint // column alignment
-}
-
-func (b *Writer) addLine() { b.lines = append(b.lines, []cell{}) }
-
-// Reset the current state.
-func (b *Writer) reset() {
-	b.buf.Reset()
-	b.pos = 0
-	b.cell = cell{}
-	b.endChar = 0
-	b.lines = b.lines[0:0]
-	b.widths = b.widths[0:0]
-	b.alignment = make(map[int]uint)
-	b.addLine()
-}
-
-// Internal representation (current state):
-//
-// - all text written is appended to buf; tabs and line breaks are stripped away
-// - at any given time there is a (possibly empty) incomplete cell at the end
-//   (the cell starts after a tab or line break)
-// - cell.size is the number of bytes belonging to the cell so far
-// - cell.width is text width in runes of that cell from the start of the cell to
-//   position pos; html tags and entities are excluded from this width if html
-//   filtering is enabled
-// - the sizes and widths of processed text are kept in the lines list
-//   which contains a list of cells for each line
-// - the widths list is a temporary list with current widths used during
-//   formatting; it is kept in Writer because it's re-used
-//
-//                    |<---------- size ---------->|
-//                    |                            |
-//                    |<- width ->|<- ignored ->|  |
-//                    |           |             |  |
-// [---processed---tab------------<tag>...</tag>...]
-// ^                  ^                         ^
-// |                  |                         |
-// buf                start of incomplete cell  pos
-
-// Formatting can be controlled with these flags.
-const (
-	// Ignore html tags and treat entities (starting with '&'
-	// and ending in ';') as single characters (width = 1).
-	FilterHTML uint = 1 << iota
-
-	// Strip Escape characters bracketing escaped text segments
-	// instead of passing them through unchanged with the text.
-	StripEscape
-
-	// Force right-alignment of cell content.
-	// Default is left-alignment.
-	AlignRight
-
-	// Handle empty columns as if they were not present in
-	// the input in the first place.
-	DiscardEmptyColumns
-
-	// Always use tabs for indentation columns (i.e., padding of
-	// leading empty cells on the left) independent of padchar.
-	TabIndent
-
-	// Print a vertical bar ('|') between columns (after formatting).
-	// Discarded columns appear as zero-width columns ("||").
-	Debug
-)
-
-// A Writer must be initialized with a call to Init. The first parameter (output)
-// specifies the filter output. The remaining parameters control the formatting:
-//
-//	minwidth	minimal cell width including any padding
-//	tabwidth	width of tab characters (equivalent number of spaces)
-//	padding		padding added to a cell before computing its width
-//	padchar		ASCII char used for padding
-//			if padchar == '\t', the Writer will assume that the
-//			width of a '\t' in the formatted output is tabwidth,
-//			and cells are left-aligned independent of align_left
-//			(for correct-looking results, tabwidth must correspond
-//			to the tab width in the viewer displaying the result)
-//	flags		formatting control
-//
-func (b *Writer) Init(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *Writer {
-	if minwidth < 0 || tabwidth < 0 || padding < 0 {
-		panic("negative minwidth, tabwidth, or padding")
-	}
-	b.output = output
-	b.minwidth = minwidth
-	b.tabwidth = tabwidth
-	b.padding = padding
-	for i := range b.padbytes {
-		b.padbytes[i] = padchar
-	}
-	if padchar == '\t' {
-		// tab padding enforces left-alignment
-		flags &^= AlignRight
-	}
-	b.flags = flags
-
-	b.reset()
-
-	return b
-}
-
-// debugging support (keep code around)
-func (b *Writer) dump() {
-	pos := 0
-	for i, line := range b.lines {
-		print("(", i, ") ")
-		for _, c := range line {
-			print("[", string(b.buf.Bytes()[pos:pos+c.size]), "]")
-			pos += c.size
-		}
-		print("\n")
-	}
-	print("\n")
-}
-
-// local error wrapper so we can distinguish errors we want to return
-// as errors from genuine panics (which we don't want to return as errors)
-type osError struct {
-	err error
-}
-
-func (b *Writer) write0(buf []byte) {
-	n, err := b.output.Write(buf)
-	if n != len(buf) && err == nil {
-		err = io.ErrShortWrite
-	}
-	if err != nil {
-		panic(osError{err})
-	}
-}
-
-func (b *Writer) writeN(src []byte, n int) {
-	for n > len(src) {
-		b.write0(src)
-		n -= len(src)
-	}
-	b.write0(src[0:n])
-}
-
-var (
-	newline = []byte{'\n'}
-	tabs    = []byte("\t\t\t\t\t\t\t\t")
-)
-
-func (b *Writer) writePadding(textw, cellw int, useTabs bool) {
-	if b.padbytes[0] == '\t' || useTabs {
-		// padding is done with tabs
-		if b.tabwidth == 0 {
-			return // tabs have no width - can't do any padding
-		}
-		// make cellw the smallest multiple of b.tabwidth
-		cellw = (cellw + b.tabwidth - 1) / b.tabwidth * b.tabwidth
-		n := cellw - textw // amount of padding
-		if n < 0 {
-			panic("internal error")
-		}
-		b.writeN(tabs, (n+b.tabwidth-1)/b.tabwidth)
-		return
-	}
-
-	// padding is done with non-tab characters
-	b.writeN(b.padbytes[0:], cellw-textw)
-}
-
-var vbar = []byte{'|'}
-
-func (b *Writer) writeLines(pos0 int, line0, line1 int) (pos int) {
-	pos = pos0
-	for i := line0; i < line1; i++ {
-		line := b.lines[i]
-
-		// if TabIndent is set, use tabs to pad leading empty cells
-		useTabs := b.flags&TabIndent != 0
-
-		for j, c := range line {
-			if j > 0 && b.flags&Debug != 0 {
-				// indicate column break
-				b.write0(vbar)
-			}
-
-			if c.size == 0 {
-				// empty cell
-				if j < len(b.widths) {
-					b.writePadding(c.width, b.widths[j], useTabs)
-				}
-			} else {
-				// non-empty cell
-				useTabs = false
-				alignColumnRight := b.alignment[j] == AlignRight
-				if (b.flags&AlignRight == 0) && !alignColumnRight { // align left
-					b.write0(b.buf.Bytes()[pos : pos+c.size])
-					pos += c.size
-					if j < len(b.widths) {
-						b.writePadding(c.width, b.widths[j], false)
-					}
-				} else if alignColumnRight && j < len(b.widths) {
-					// just this column
-					internalSize := b.widths[j] - b.padding
-					if j < len(b.widths) {
-						b.writePadding(c.width, internalSize, false)
-					}
-					b.write0(b.buf.Bytes()[pos : pos+c.size])
-					if b.padding > 0 {
-						b.writePadding(0, b.padding, false)
-					}
-					pos += c.size
-				} else { // align right
-					if j < len(b.widths) {
-						b.writePadding(c.width, b.widths[j], false)
-					}
-					b.write0(b.buf.Bytes()[pos : pos+c.size])
-					pos += c.size
-				}
-			}
-		}
-
-		if i+1 == len(b.lines) {
-			// last buffered line - we don't have a newline, so just write
-			// any outstanding buffered data
-			b.write0(b.buf.Bytes()[pos : pos+b.cell.size])
-			pos += b.cell.size
-		} else {
-			// not the last line - write newline
-			b.write0(newline)
-		}
-	}
-	return
-}
-
-// Format the text between line0 and line1 (excluding line1); pos
-// is the buffer position corresponding to the beginning of line0.
-// Returns the buffer position corresponding to the beginning of
-// line1 and an error, if any.
-//
-func (b *Writer) format(pos0 int, line0, line1 int) (pos int) {
-	pos = pos0
-	column := len(b.widths)
-	for this := line0; this < line1; this++ {
-		line := b.lines[this]
-
-		if column < len(line)-1 {
-			// cell exists in this column => this line
-			// has more cells than the previous line
-			// (the last cell per line is ignored because cells are
-			// tab-terminated; the last cell per line describes the
-			// text before the newline/formfeed and does not belong
-			// to a column)
-
-			// print unprinted lines until beginning of block
-			pos = b.writeLines(pos, line0, this)
-			line0 = this
-
-			// column block begin
-			width := b.minwidth // minimal column width
-			discardable := true // true if all cells in this column are empty and "soft"
-			for ; this < line1; this++ {
-				line = b.lines[this]
-				if column < len(line)-1 {
-					// cell exists in this column
-					c := line[column]
-					// update width
-					if w := c.width + b.padding; w > width {
-						width = w
-					}
-					// update discardable
-					if c.width > 0 || c.htab {
-						discardable = false
-					}
-				} else {
-					break
-				}
-			}
-			// column block end
-
-			// discard empty columns if necessary
-			if discardable && b.flags&DiscardEmptyColumns != 0 {
-				width = 0
-			}
-
-			// format and print all columns to the right of this column
-			// (we know the widths of this column and all columns to the left)
-			b.widths = append(b.widths, width) // push width
-			pos = b.format(pos, line0, this)
-			b.widths = b.widths[0 : len(b.widths)-1] // pop width
-			line0 = this
-		}
-	}
-
-	// print unprinted lines until end
-	return b.writeLines(pos, line0, line1)
-}
-
-// Append text to current cell.
-func (b *Writer) append(text []byte) {
-	b.buf.Write(text)
-	b.cell.size += len(text)
-}
-
-// Update the cell width.
-func (b *Writer) updateWidth() {
-	// ---- Changes here -----
-	newChars := b.buf.Bytes()[b.pos:b.buf.Len()]
-	cleaned := vtclean.Clean(string(newChars), false) // false to strip colors
-	b.cell.width += utf8.RuneCount([]byte(cleaned))
-	// --- end of changes ----
-	b.pos = b.buf.Len()
-}
-
-// To escape a text segment, bracket it with Escape characters.
-// For instance, the tab in this string "Ignore this tab: \xff\t\xff"
-// does not terminate a cell and constitutes a single character of
-// width one for formatting purposes.
-//
-// The value 0xff was chosen because it cannot appear in a valid UTF-8 sequence.
-//
-const Escape = '\xff'
-
-// Start escaped mode.
-func (b *Writer) startEscape(ch byte) {
-	switch ch {
-	case Escape:
-		b.endChar = Escape
-	case '<':
-		b.endChar = '>'
-	case '&':
-		b.endChar = ';'
-	}
-}
-
-// Terminate escaped mode. If the escaped text was an HTML tag, its width
-// is assumed to be zero for formatting purposes; if it was an HTML entity,
-// its width is assumed to be one. In all other cases, the width is the
-// unicode width of the text.
-//
-func (b *Writer) endEscape() {
-	switch b.endChar {
-	case Escape:
-		b.updateWidth()
-		if b.flags&StripEscape == 0 {
-			b.cell.width -= 2 // don't count the Escape chars
-		}
-	case '>': // tag of zero width
-	case ';':
-		b.cell.width++ // entity, count as one rune
-	}
-	b.pos = b.buf.Len()
-	b.endChar = 0
-}
-
-// Terminate the current cell by adding it to the list of cells of the
-// current line. Returns the number of cells in that line.
-//
-func (b *Writer) terminateCell(htab bool) int {
-	b.cell.htab = htab
-	line := &b.lines[len(b.lines)-1]
-	*line = append(*line, b.cell)
-	b.cell = cell{}
-	return len(*line)
-}
-
-func handlePanic(err *error, op string) {
-	if e := recover(); e != nil {
-		if nerr, ok := e.(osError); ok {
-			*err = nerr.err
-			return
-		}
-		panic("tabwriter: panic during " + op)
-	}
-}
-
-// Flush should be called after the last call to Write to ensure
-// that any data buffered in the Writer is written to output. Any
-// incomplete escape sequence at the end is considered
-// complete for formatting purposes.
-//
-func (b *Writer) Flush() (err error) {
-	defer b.reset() // even in the presence of errors
-	defer handlePanic(&err, "Flush")
-
-	// add current cell if not empty
-	if b.cell.size > 0 {
-		if b.endChar != 0 {
-			// inside escape - terminate it even if incomplete
-			b.endEscape()
-		}
-		b.terminateCell(false)
-	}
-
-	// format contents of buffer
-	b.format(0, 0, len(b.lines))
-
-	return
-}
-
-var hbar = []byte("---\n")
-
-// SetColumnAlignRight will mark a particular column as align right.
-// This is reset on the next flush.
-func (b *Writer) SetColumnAlignRight(column int) {
-	b.alignment[column] = AlignRight
-}
-
-// Write writes buf to the writer b.
-// The only errors returned are ones encountered
-// while writing to the underlying output stream.
-//
-func (b *Writer) Write(buf []byte) (n int, err error) {
-	defer handlePanic(&err, "Write")
-
-	// split text into cells
-	n = 0
-	for i, ch := range buf {
-		if b.endChar == 0 {
-			// outside escape
-			switch ch {
-			case '\t', '\v', '\n', '\f':
-				// end of cell
-				b.append(buf[n:i])
-				b.updateWidth()
-				n = i + 1 // ch consumed
-				ncells := b.terminateCell(ch == '\t')
-				if ch == '\n' || ch == '\f' {
-					// terminate line
-					b.addLine()
-					if ch == '\f' || ncells == 1 {
-						// A '\f' always forces a flush. Otherwise, if the previous
-						// line has only one cell which does not have an impact on
-						// the formatting of the following lines (the last cell per
-						// line is ignored by format()), thus we can flush the
-						// Writer contents.
-						if err = b.Flush(); err != nil {
-							return
-						}
-						if ch == '\f' && b.flags&Debug != 0 {
-							// indicate section break
-							b.write0(hbar)
-						}
-					}
-				}
-
-			case Escape:
-				// start of escaped sequence
-				b.append(buf[n:i])
-				b.updateWidth()
-				n = i
-				if b.flags&StripEscape != 0 {
-					n++ // strip Escape
-				}
-				b.startEscape(Escape)
-
-			case '<', '&':
-				// possibly an html tag/entity
-				if b.flags&FilterHTML != 0 {
-					// begin of tag/entity
-					b.append(buf[n:i])
-					b.updateWidth()
-					n = i
-					b.startEscape(ch)
-				}
-			}
-
-		} else {
-			// inside escape
-			if ch == b.endChar {
-				// end of tag/entity
-				j := i + 1
-				if ch == Escape && b.flags&StripEscape != 0 {
-					j = i // strip Escape
-				}
-				b.append(buf[n:j])
-				n = i + 1 // ch consumed
-				b.endEscape()
-			}
-		}
-	}
-
-	// append leftover text
-	b.append(buf[n:])
-	n = len(buf)
-	return
-}
-
-// NewWriter allocates and initializes a new tabwriter.Writer.
-// The parameters are the same as for the Init function.
-//
-func NewWriter(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *Writer {
-	return new(Writer).Init(output, minwidth, tabwidth, padding, padchar, flags)
-}
diff --git a/vendor/github.com/juju/ansiterm/terminal.go b/vendor/github.com/juju/ansiterm/terminal.go
deleted file mode 100644
index 96fd11c51..000000000
--- a/vendor/github.com/juju/ansiterm/terminal.go
+++ /dev/null
@@ -1,32 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-import (
-	"io"
-	"os"
-
-	"github.com/mattn/go-colorable"
-	"github.com/mattn/go-isatty"
-)
-
-// colorEnabledWriter returns a writer that can handle the ansi color codes
-// and true if the writer passed in is a terminal capable of color. If the
-// TERM environment variable is set to "dumb", the terminal is not considered
-// color capable.
-func colorEnabledWriter(w io.Writer) (io.Writer, bool) {
-	f, ok := w.(*os.File)
-	if !ok {
-		return w, false
-	}
-	// Check the TERM environment variable specifically
-	// to check for "dumb" terminals.
-	if os.Getenv("TERM") == "dumb" {
-		return w, false
-	}
-	if !isatty.IsTerminal(f.Fd()) {
-		return w, false
-	}
-	return colorable.NewColorable(f), true
-}
diff --git a/vendor/github.com/juju/ansiterm/writer.go b/vendor/github.com/juju/ansiterm/writer.go
deleted file mode 100644
index 32437bb27..000000000
--- a/vendor/github.com/juju/ansiterm/writer.go
+++ /dev/null
@@ -1,74 +0,0 @@
-// Copyright 2016 Canonical Ltd.
-// Licensed under the LGPLv3, see LICENCE file for details.
-
-package ansiterm
-
-import (
-	"fmt"
-	"io"
-)
-
-// Writer allows colors and styles to be specified. If the io.Writer
-// is not a terminal capable of color, all attempts to set colors or
-// styles are no-ops.
-type Writer struct {
-	io.Writer
-
-	noColor bool
-}
-
-// NewWriter returns a Writer that allows the caller to specify colors and
-// styles. If the io.Writer is not a terminal capable of color, all attempts
-// to set colors or styles are no-ops.
-func NewWriter(w io.Writer) *Writer {
-	writer, colorCapable := colorEnabledWriter(w)
-	return &Writer{
-		Writer:  writer,
-		noColor: !colorCapable,
-	}
-}
-
-// SetColorCapable forces the writer to either write the ANSI escape color
-// if capable is true, or to not write them if capable is false.
-func (w *Writer) SetColorCapable(capable bool) {
-	w.noColor = !capable
-}
-
-// SetForeground sets the foreground color.
-func (w *Writer) SetForeground(c Color) {
-	w.writeSGR(c.foreground())
-}
-
-// SetBackground sets the background color.
-func (w *Writer) SetBackground(c Color) {
-	w.writeSGR(c.background())
-}
-
-// SetStyle sets the text style.
-func (w *Writer) SetStyle(s Style) {
-	w.writeSGR(s.enable())
-}
-
-// ClearStyle clears the text style.
-func (w *Writer) ClearStyle(s Style) {
-	w.writeSGR(s.disable())
-}
-
-// Reset returns the default foreground and background colors with no styles.
-func (w *Writer) Reset() {
-	w.writeSGR(reset)
-}
-
-type sgr interface {
-	// sgr returns the combined escape sequence for the Select Graphic Rendition.
-	sgr() string
-}
-
-// writeSGR takes the appropriate integer SGR parameters
-// and writes out the ANIS escape code.
-func (w *Writer) writeSGR(value sgr) {
-	if w.noColor {
-		return
-	}
-	fmt.Fprint(w, value.sgr())
-}