Remove dependency on kubernetes

podman parse and attach were using a very small portion of the kubernetes code
but using it caused a signficant increase in binary size.

Signed-off-by: baude <bbaude@redhat.com>

Closes: #559
Approved by: rhatdan

5 files changed, 0 insertions, 1080 deletions

diff --git a/vendor/k8s.io/kubernetes/third_party/forked/golang/LICENSE b/vendor/k8s.io/kubernetes/third_party/forked/golang/LICENSE
deleted file mode 100644
index 744875676..000000000
--- a/vendor/k8s.io/kubernetes/third_party/forked/golang/LICENSE
+++ /dev/null
@@ -1,27 +0,0 @@
-Copyright (c) 2012 The Go Authors. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-   * Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-   * Redistributions in binary form must reproduce the above
-copyright notice, this list of conditions and the following disclaimer
-in the documentation and/or other materials provided with the
-distribution.
-   * Neither the name of Google Inc. nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/k8s.io/kubernetes/third_party/forked/golang/PATENTS b/vendor/k8s.io/kubernetes/third_party/forked/golang/PATENTS
deleted file mode 100644
index 733099041..000000000
--- a/vendor/k8s.io/kubernetes/third_party/forked/golang/PATENTS
+++ /dev/null
@@ -1,22 +0,0 @@
-Additional IP Rights Grant (Patents)
-
-"This implementation" means the copyrightable works distributed by
-Google as part of the Go project.
-
-Google hereby grants to You a perpetual, worldwide, non-exclusive,
-no-charge, royalty-free, irrevocable (except as stated in this section)
-patent license to make, have made, use, offer to sell, sell, import,
-transfer and otherwise run, modify and propagate the contents of this
-implementation of Go, where such license applies only to those patent
-claims, both currently owned or controlled by Google and acquired in
-the future, licensable by Google that are necessarily infringed by this
-implementation of Go.  This grant does not include claims that would be
-infringed only as a consequence of further modification of this
-implementation.  If you or your agent or exclusive licensee institute or
-order or agree to the institution of patent litigation against any
-entity (including a cross-claim or counterclaim in a lawsuit) alleging
-that this implementation of Go or any code incorporated within this
-implementation of Go constitutes direct or contributory patent
-infringement, or inducement of patent infringement, then any patent
-rights granted to you under this License for this implementation of Go
-shall terminate as of the date such litigation is filed.
diff --git a/vendor/k8s.io/kubernetes/third_party/forked/golang/expansion/expand.go b/vendor/k8s.io/kubernetes/third_party/forked/golang/expansion/expand.go
deleted file mode 100644
index 6bf0ea8ce..000000000
--- a/vendor/k8s.io/kubernetes/third_party/forked/golang/expansion/expand.go
+++ /dev/null
@@ -1,102 +0,0 @@
-package expansion
-
-import (
-	"bytes"
-)
-
-const (
-	operator        = '$'
-	referenceOpener = '('
-	referenceCloser = ')'
-)
-
-// syntaxWrap returns the input string wrapped by the expansion syntax.
-func syntaxWrap(input string) string {
-	return string(operator) + string(referenceOpener) + input + string(referenceCloser)
-}
-
-// MappingFuncFor returns a mapping function for use with Expand that
-// implements the expansion semantics defined in the expansion spec; it
-// returns the input string wrapped in the expansion syntax if no mapping
-// for the input is found.
-func MappingFuncFor(context ...map[string]string) func(string) string {
-	return func(input string) string {
-		for _, vars := range context {
-			val, ok := vars[input]
-			if ok {
-				return val
-			}
-		}
-
-		return syntaxWrap(input)
-	}
-}
-
-// Expand replaces variable references in the input string according to
-// the expansion spec using the given mapping function to resolve the
-// values of variables.
-func Expand(input string, mapping func(string) string) string {
-	var buf bytes.Buffer
-	checkpoint := 0
-	for cursor := 0; cursor < len(input); cursor++ {
-		if input[cursor] == operator && cursor+1 < len(input) {
-			// Copy the portion of the input string since the last
-			// checkpoint into the buffer
-			buf.WriteString(input[checkpoint:cursor])
-
-			// Attempt to read the variable name as defined by the
-			// syntax from the input string
-			read, isVar, advance := tryReadVariableName(input[cursor+1:])
-
-			if isVar {
-				// We were able to read a variable name correctly;
-				// apply the mapping to the variable name and copy the
-				// bytes into the buffer
-				buf.WriteString(mapping(read))
-			} else {
-				// Not a variable name; copy the read bytes into the buffer
-				buf.WriteString(read)
-			}
-
-			// Advance the cursor in the input string to account for
-			// bytes consumed to read the variable name expression
-			cursor += advance
-
-			// Advance the checkpoint in the input string
-			checkpoint = cursor + 1
-		}
-	}
-
-	// Return the buffer and any remaining unwritten bytes in the
-	// input string.
-	return buf.String() + input[checkpoint:]
-}
-
-// tryReadVariableName attempts to read a variable name from the input
-// string and returns the content read from the input, whether that content
-// represents a variable name to perform mapping on, and the number of bytes
-// consumed in the input string.
-//
-// The input string is assumed not to contain the initial operator.
-func tryReadVariableName(input string) (string, bool, int) {
-	switch input[0] {
-	case operator:
-		// Escaped operator; return it.
-		return input[0:1], false, 1
-	case referenceOpener:
-		// Scan to expression closer
-		for i := 1; i < len(input); i++ {
-			if input[i] == referenceCloser {
-				return input[1:i], true, i + 1
-			}
-		}
-
-		// Incomplete reference; return it.
-		return string(operator) + string(referenceOpener), false, 1
-	default:
-		// Not the beginning of an expression, ie, an operator
-		// that doesn't begin an expression.  Return the operator
-		// and the first rune in the string.
-		return (string(operator) + string(input[0])), false, 1
-	}
-}
diff --git a/vendor/k8s.io/kubernetes/third_party/protobuf/google/protobuf/compiler/plugin.proto b/vendor/k8s.io/kubernetes/third_party/protobuf/google/protobuf/compiler/plugin.proto
deleted file mode 100644
index 5116167e0..000000000
--- a/vendor/k8s.io/kubernetes/third_party/protobuf/google/protobuf/compiler/plugin.proto
+++ /dev/null
@@ -1,150 +0,0 @@
-// Protocol Buffers - Google's data interchange format
-// Copyright 2008 Google Inc.  All rights reserved.
-// https://developers.google.com/protocol-buffers/
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// Author: kenton@google.com (Kenton Varda)
-//
-// WARNING:  The plugin interface is currently EXPERIMENTAL and is subject to
-//   change.
-//
-// protoc (aka the Protocol Compiler) can be extended via plugins.  A plugin is
-// just a program that reads a CodeGeneratorRequest from stdin and writes a
-// CodeGeneratorResponse to stdout.
-//
-// Plugins written using C++ can use google/protobuf/compiler/plugin.h instead
-// of dealing with the raw protocol defined here.
-//
-// A plugin executable needs only to be placed somewhere in the path.  The
-// plugin should be named "protoc-gen-$NAME", and will then be used when the
-// flag "--${NAME}_out" is passed to protoc.
-
-syntax = "proto2";
-package google.protobuf.compiler;
-option java_package = "com.google.protobuf.compiler";
-option java_outer_classname = "PluginProtos";
-
-option go_package = "plugin_go";
-
-import "google/protobuf/descriptor.proto";
-
-// An encoded CodeGeneratorRequest is written to the plugin's stdin.
-message CodeGeneratorRequest {
-  // The .proto files that were explicitly listed on the command-line.  The
-  // code generator should generate code only for these files.  Each file's
-  // descriptor will be included in proto_file, below.
-  repeated string file_to_generate = 1;
-
-  // The generator parameter passed on the command-line.
-  optional string parameter = 2;
-
-  // FileDescriptorProtos for all files in files_to_generate and everything
-  // they import.  The files will appear in topological order, so each file
-  // appears before any file that imports it.
-  //
-  // protoc guarantees that all proto_files will be written after
-  // the fields above, even though this is not technically guaranteed by the
-  // protobuf wire format.  This theoretically could allow a plugin to stream
-  // in the FileDescriptorProtos and handle them one by one rather than read
-  // the entire set into memory at once.  However, as of this writing, this
-  // is not similarly optimized on protoc's end -- it will store all fields in
-  // memory at once before sending them to the plugin.
-  repeated FileDescriptorProto proto_file = 15;
-}
-
-// The plugin writes an encoded CodeGeneratorResponse to stdout.
-message CodeGeneratorResponse {
-  // Error message.  If non-empty, code generation failed.  The plugin process
-  // should exit with status code zero even if it reports an error in this way.
-  //
-  // This should be used to indicate errors in .proto files which prevent the
-  // code generator from generating correct code.  Errors which indicate a
-  // problem in protoc itself -- such as the input CodeGeneratorRequest being
-  // unparseable -- should be reported by writing a message to stderr and
-  // exiting with a non-zero status code.
-  optional string error = 1;
-
-  // Represents a single generated file.
-  message File {
-    // The file name, relative to the output directory.  The name must not
-    // contain "." or ".." components and must be relative, not be absolute (so,
-    // the file cannot lie outside the output directory).  "/" must be used as
-    // the path separator, not "\".
-    //
-    // If the name is omitted, the content will be appended to the previous
-    // file.  This allows the generator to break large files into small chunks,
-    // and allows the generated text to be streamed back to protoc so that large
-    // files need not reside completely in memory at one time.  Note that as of
-    // this writing protoc does not optimize for this -- it will read the entire
-    // CodeGeneratorResponse before writing files to disk.
-    optional string name = 1;
-
-    // If non-empty, indicates that the named file should already exist, and the
-    // content here is to be inserted into that file at a defined insertion
-    // point.  This feature allows a code generator to extend the output
-    // produced by another code generator.  The original generator may provide
-    // insertion points by placing special annotations in the file that look
-    // like:
-    //   @@protoc_insertion_point(NAME)
-    // The annotation can have arbitrary text before and after it on the line,
-    // which allows it to be placed in a comment.  NAME should be replaced with
-    // an identifier naming the point -- this is what other generators will use
-    // as the insertion_point.  Code inserted at this point will be placed
-    // immediately above the line containing the insertion point (thus multiple
-    // insertions to the same point will come out in the order they were added).
-    // The double-@ is intended to make it unlikely that the generated code
-    // could contain things that look like insertion points by accident.
-    //
-    // For example, the C++ code generator places the following line in the
-    // .pb.h files that it generates:
-    //   // @@protoc_insertion_point(namespace_scope)
-    // This line appears within the scope of the file's package namespace, but
-    // outside of any particular class.  Another plugin can then specify the
-    // insertion_point "namespace_scope" to generate additional classes or
-    // other declarations that should be placed in this scope.
-    //
-    // Note that if the line containing the insertion point begins with
-    // whitespace, the same whitespace will be added to every line of the
-    // inserted text.  This is useful for languages like Python, where
-    // indentation matters.  In these languages, the insertion point comment
-    // should be indented the same amount as any inserted code will need to be
-    // in order to work correctly in that context.
-    //
-    // The code generator that generates the initial file and the one which
-    // inserts into it must both run as part of a single invocation of protoc.
-    // Code generators are executed in the order in which they appear on the
-    // command line.
-    //
-    // If |insertion_point| is present, |name| must also be present.
-    optional string insertion_point = 2;
-
-    // The file contents.
-    optional string content = 15;
-  }
-  repeated File file = 15;
-}
\ No newline at end of file
diff --git a/vendor/k8s.io/kubernetes/third_party/protobuf/google/protobuf/descriptor.proto b/vendor/k8s.io/kubernetes/third_party/protobuf/google/protobuf/descriptor.proto
deleted file mode 100644
index 14594a8c6..000000000
--- a/vendor/k8s.io/kubernetes/third_party/protobuf/google/protobuf/descriptor.proto
+++ /dev/null
@@ -1,779 +0,0 @@
-// Protocol Buffers - Google's data interchange format
-// Copyright 2008 Google Inc.  All rights reserved.
-// https://developers.google.com/protocol-buffers/
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// Author: kenton@google.com (Kenton Varda)
-//  Based on original Protocol Buffers design by
-//  Sanjay Ghemawat, Jeff Dean, and others.
-//
-// The messages in this file describe the definitions found in .proto files.
-// A valid .proto file can be translated directly to a FileDescriptorProto
-// without any other information (e.g. without reading its imports).
-
-
-syntax = "proto2";
-
-package google.protobuf;
-option go_package = "descriptor";
-option java_package = "com.google.protobuf";
-option java_outer_classname = "DescriptorProtos";
-option csharp_namespace = "Google.Protobuf.Reflection";
-option objc_class_prefix = "GPB";
-
-// descriptor.proto must be optimized for speed because reflection-based
-// algorithms don't work during bootstrapping.
-option optimize_for = SPEED;
-
-// The protocol compiler can output a FileDescriptorSet containing the .proto
-// files it parses.
-message FileDescriptorSet {
-  repeated FileDescriptorProto file = 1;
-}
-
-// Describes a complete .proto file.
-message FileDescriptorProto {
-  optional string name = 1;       // file name, relative to root of source tree
-  optional string package = 2;    // e.g. "foo", "foo.bar", etc.
-
-  // Names of files imported by this file.
-  repeated string dependency = 3;
-  // Indexes of the public imported files in the dependency list above.
-  repeated int32 public_dependency = 10;
-  // Indexes of the weak imported files in the dependency list.
-  // For Google-internal migration only. Do not use.
-  repeated int32 weak_dependency = 11;
-
-  // All top-level definitions in this file.
-  repeated DescriptorProto message_type = 4;
-  repeated EnumDescriptorProto enum_type = 5;
-  repeated ServiceDescriptorProto service = 6;
-  repeated FieldDescriptorProto extension = 7;
-
-  optional FileOptions options = 8;
-
-  // This field contains optional information about the original source code.
-  // You may safely remove this entire field without harming runtime
-  // functionality of the descriptors -- the information is needed only by
-  // development tools.
-  optional SourceCodeInfo source_code_info = 9;
-
-  // The syntax of the proto file.
-  // The supported values are "proto2" and "proto3".
-  optional string syntax = 12;
-}
-
-// Describes a message type.
-message DescriptorProto {
-  optional string name = 1;
-
-  repeated FieldDescriptorProto field = 2;
-  repeated FieldDescriptorProto extension = 6;
-
-  repeated DescriptorProto nested_type = 3;
-  repeated EnumDescriptorProto enum_type = 4;
-
-  message ExtensionRange {
-    optional int32 start = 1;
-    optional int32 end = 2;
-  }
-  repeated ExtensionRange extension_range = 5;
-
-  repeated OneofDescriptorProto oneof_decl = 8;
-
-  optional MessageOptions options = 7;
-
-  // Range of reserved tag numbers. Reserved tag numbers may not be used by
-  // fields or extension ranges in the same message. Reserved ranges may
-  // not overlap.
-  message ReservedRange {
-    optional int32 start = 1; // Inclusive.
-    optional int32 end = 2;   // Exclusive.
-  }
-  repeated ReservedRange reserved_range = 9;
-  // Reserved field names, which may not be used by fields in the same message.
-  // A given name may only be reserved once.
-  repeated string reserved_name = 10;
-}
-
-// Describes a field within a message.
-message FieldDescriptorProto {
-  enum Type {
-    // 0 is reserved for errors.
-    // Order is weird for historical reasons.
-    TYPE_DOUBLE         = 1;
-    TYPE_FLOAT          = 2;
-    // Not ZigZag encoded.  Negative numbers take 10 bytes.  Use TYPE_SINT64 if
-    // negative values are likely.
-    TYPE_INT64          = 3;
-    TYPE_UINT64         = 4;
-    // Not ZigZag encoded.  Negative numbers take 10 bytes.  Use TYPE_SINT32 if
-    // negative values are likely.
-    TYPE_INT32          = 5;
-    TYPE_FIXED64        = 6;
-    TYPE_FIXED32        = 7;
-    TYPE_BOOL           = 8;
-    TYPE_STRING         = 9;
-    TYPE_GROUP          = 10;  // Tag-delimited aggregate.
-    TYPE_MESSAGE        = 11;  // Length-delimited aggregate.
-
-    // New in version 2.
-    TYPE_BYTES          = 12;
-    TYPE_UINT32         = 13;
-    TYPE_ENUM           = 14;
-    TYPE_SFIXED32       = 15;
-    TYPE_SFIXED64       = 16;
-    TYPE_SINT32         = 17;  // Uses ZigZag encoding.
-    TYPE_SINT64         = 18;  // Uses ZigZag encoding.
-  };
-
-  enum Label {
-    // 0 is reserved for errors
-    LABEL_OPTIONAL      = 1;
-    LABEL_REQUIRED      = 2;
-    LABEL_REPEATED      = 3;
-    // TODO(sanjay): Should we add LABEL_MAP?
-  };
-
-  optional string name = 1;
-  optional int32 number = 3;
-  optional Label label = 4;
-
-  // If type_name is set, this need not be set.  If both this and type_name
-  // are set, this must be one of TYPE_ENUM, TYPE_MESSAGE or TYPE_GROUP.
-  optional Type type = 5;
-
-  // For message and enum types, this is the name of the type.  If the name
-  // starts with a '.', it is fully-qualified.  Otherwise, C++-like scoping
-  // rules are used to find the type (i.e. first the nested types within this
-  // message are searched, then within the parent, on up to the root
-  // namespace).
-  optional string type_name = 6;
-
-  // For extensions, this is the name of the type being extended.  It is
-  // resolved in the same manner as type_name.
-  optional string extendee = 2;
-
-  // For numeric types, contains the original text representation of the value.
-  // For booleans, "true" or "false".
-  // For strings, contains the default text contents (not escaped in any way).
-  // For bytes, contains the C escaped value.  All bytes >= 128 are escaped.
-  // TODO(kenton):  Base-64 encode?
-  optional string default_value = 7;
-
-  // If set, gives the index of a oneof in the containing type's oneof_decl
-  // list.  This field is a member of that oneof.
-  optional int32 oneof_index = 9;
-
-  // JSON name of this field. The value is set by protocol compiler. If the
-  // user has set a "json_name" option on this field, that option's value
-  // will be used. Otherwise, it's deduced from the field's name by converting
-  // it to camelCase.
-  optional string json_name = 10;
-
-  optional FieldOptions options = 8;
-}
-
-// Describes a oneof.
-message OneofDescriptorProto {
-  optional string name = 1;
-}
-
-// Describes an enum type.
-message EnumDescriptorProto {
-  optional string name = 1;
-
-  repeated EnumValueDescriptorProto value = 2;
-
-  optional EnumOptions options = 3;
-}
-
-// Describes a value within an enum.
-message EnumValueDescriptorProto {
-  optional string name = 1;
-  optional int32 number = 2;
-
-  optional EnumValueOptions options = 3;
-}
-
-// Describes a service.
-message ServiceDescriptorProto {
-  optional string name = 1;
-  repeated MethodDescriptorProto method = 2;
-
-  optional ServiceOptions options = 3;
-}
-
-// Describes a method of a service.
-message MethodDescriptorProto {
-  optional string name = 1;
-
-  // Input and output type names.  These are resolved in the same way as
-  // FieldDescriptorProto.type_name, but must refer to a message type.
-  optional string input_type = 2;
-  optional string output_type = 3;
-
-  optional MethodOptions options = 4;
-
-  // Identifies if client streams multiple client messages
-  optional bool client_streaming = 5 [default=false];
-  // Identifies if server streams multiple server messages
-  optional bool server_streaming = 6 [default=false];
-}
-
-
-// ===================================================================
-// Options
-
-// Each of the definitions above may have "options" attached.  These are
-// just annotations which may cause code to be generated slightly differently
-// or may contain hints for code that manipulates protocol messages.
-//
-// Clients may define custom options as extensions of the *Options messages.
-// These extensions may not yet be known at parsing time, so the parser cannot
-// store the values in them.  Instead it stores them in a field in the *Options
-// message called uninterpreted_option. This field must have the same name
-// across all *Options messages. We then use this field to populate the
-// extensions when we build a descriptor, at which point all protos have been
-// parsed and so all extensions are known.
-//
-// Extension numbers for custom options may be chosen as follows:
-// * For options which will only be used within a single application or
-//   organization, or for experimental options, use field numbers 50000
-//   through 99999.  It is up to you to ensure that you do not use the
-//   same number for multiple options.
-// * For options which will be published and used publicly by multiple
-//   independent entities, e-mail protobuf-global-extension-registry@google.com
-//   to reserve extension numbers. Simply provide your project name (e.g.
-//   Objective-C plugin) and your project website (if available) -- there's no
-//   need to explain how you intend to use them. Usually you only need one
-//   extension number. You can declare multiple options with only one extension
-//   number by putting them in a sub-message. See the Custom Options section of
-//   the docs for examples:
-//   https://developers.google.com/protocol-buffers/docs/proto#options
-//   If this turns out to be popular, a web service will be set up
-//   to automatically assign option numbers.
-
-
-message FileOptions {
-
-  // Sets the Java package where classes generated from this .proto will be
-  // placed.  By default, the proto package is used, but this is often
-  // inappropriate because proto packages do not normally start with backwards
-  // domain names.
-  optional string java_package = 1;
-
-
-  // If set, all the classes from the .proto file are wrapped in a single
-  // outer class with the given name.  This applies to both Proto1
-  // (equivalent to the old "--one_java_file" option) and Proto2 (where
-  // a .proto always translates to a single class, but you may want to
-  // explicitly choose the class name).
-  optional string java_outer_classname = 8;
-
-  // If set true, then the Java code generator will generate a separate .java
-  // file for each top-level message, enum, and service defined in the .proto
-  // file.  Thus, these types will *not* be nested inside the outer class
-  // named by java_outer_classname.  However, the outer class will still be
-  // generated to contain the file's getDescriptor() method as well as any
-  // top-level extensions defined in the file.
-  optional bool java_multiple_files = 10 [default=false];
-
-  // If set true, then the Java code generator will generate equals() and
-  // hashCode() methods for all messages defined in the .proto file.
-  // This increases generated code size, potentially substantially for large
-  // protos, which may harm a memory-constrained application.
-  // - In the full runtime this is a speed optimization, as the
-  // AbstractMessage base class includes reflection-based implementations of
-  // these methods.
-  // - In the lite runtime, setting this option changes the semantics of
-  // equals() and hashCode() to more closely match those of the full runtime;
-  // the generated methods compute their results based on field values rather
-  // than object identity. (Implementations should not assume that hashcodes
-  // will be consistent across runtimes or versions of the protocol compiler.)
-  optional bool java_generate_equals_and_hash = 20 [default=false];
-
-  // If set true, then the Java2 code generator will generate code that
-  // throws an exception whenever an attempt is made to assign a non-UTF-8
-  // byte sequence to a string field.
-  // Message reflection will do the same.
-  // However, an extension field still accepts non-UTF-8 byte sequences.
-  // This option has no effect on when used with the lite runtime.
-  optional bool java_string_check_utf8 = 27 [default=false];
-
-
-  // Generated classes can be optimized for speed or code size.
-  enum OptimizeMode {
-    SPEED = 1;        // Generate complete code for parsing, serialization,
-                      // etc.
-    CODE_SIZE = 2;    // Use ReflectionOps to implement these methods.
-    LITE_RUNTIME = 3; // Generate code using MessageLite and the lite runtime.
-  }
-  optional OptimizeMode optimize_for = 9 [default=SPEED];
-
-  // Sets the Go package where structs generated from this .proto will be
-  // placed. If omitted, the Go package will be derived from the following:
-  //   - The basename of the package import path, if provided.
-  //   - Otherwise, the package statement in the .proto file, if present.
-  //   - Otherwise, the basename of the .proto file, without extension.
-  optional string go_package = 11;
-
-
-
-  // Should generic services be generated in each language?  "Generic" services
-  // are not specific to any particular RPC system.  They are generated by the
-  // main code generators in each language (without additional plugins).
-  // Generic services were the only kind of service generation supported by
-  // early versions of google.protobuf.
-  //
-  // Generic services are now considered deprecated in favor of using plugins
-  // that generate code specific to your particular RPC system.  Therefore,
-  // these default to false.  Old code which depends on generic services should
-  // explicitly set them to true.
-  optional bool cc_generic_services = 16 [default=false];
-  optional bool java_generic_services = 17 [default=false];
-  optional bool py_generic_services = 18 [default=false];
-
-  // Is this file deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for everything in the file, or it will be completely ignored; in the very
-  // least, this is a formalization for deprecating files.
-  optional bool deprecated = 23 [default=false];
-
-  // Enables the use of arenas for the proto messages in this file. This applies
-  // only to generated classes for C++.
-  optional bool cc_enable_arenas = 31 [default=false];
-
-
-  // Sets the objective c class prefix which is prepended to all objective c
-  // generated classes from this .proto. There is no default.
-  optional string objc_class_prefix = 36;
-
-  // Namespace for generated classes; defaults to the package.
-  optional string csharp_namespace = 37;
-
-  // Whether the nano proto compiler should generate in the deprecated non-nano
-  // suffixed package.
-  optional bool javanano_use_deprecated_package = 38;
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message MessageOptions {
-  // Set true to use the old proto1 MessageSet wire format for extensions.
-  // This is provided for backwards-compatibility with the MessageSet wire
-  // format.  You should not use this for any other reason:  It's less
-  // efficient, has fewer features, and is more complicated.
-  //
-  // The message must be defined exactly as follows:
-  //   message Foo {
-  //     option message_set_wire_format = true;
-  //     extensions 4 to max;
-  //   }
-  // Note that the message cannot have any defined fields; MessageSets only
-  // have extensions.
-  //
-  // All extensions of your type must be singular messages; e.g. they cannot
-  // be int32s, enums, or repeated messages.
-  //
-  // Because this is an option, the above two restrictions are not enforced by
-  // the protocol compiler.
-  optional bool message_set_wire_format = 1 [default=false];
-
-  // Disables the generation of the standard "descriptor()" accessor, which can
-  // conflict with a field of the same name.  This is meant to make migration
-  // from proto1 easier; new code should avoid fields named "descriptor".
-  optional bool no_standard_descriptor_accessor = 2 [default=false];
-
-  // Is this message deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the message, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating messages.
-  optional bool deprecated = 3 [default=false];
-
-  // Whether the message is an automatically generated map entry type for the
-  // maps field.
-  //
-  // For maps fields:
-  //     map<KeyType, ValueType> map_field = 1;
-  // The parsed descriptor looks like:
-  //     message MapFieldEntry {
-  //         option map_entry = true;
-  //         optional KeyType key = 1;
-  //         optional ValueType value = 2;
-  //     }
-  //     repeated MapFieldEntry map_field = 1;
-  //
-  // Implementations may choose not to generate the map_entry=true message, but
-  // use a native map in the target language to hold the keys and values.
-  // The reflection APIs in such implementions still need to work as
-  // if the field is a repeated message field.
-  //
-  // NOTE: Do not set the option in .proto files. Always use the maps syntax
-  // instead. The option should only be implicitly set by the proto compiler
-  // parser.
-  optional bool map_entry = 7;
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message FieldOptions {
-  // The ctype option instructs the C++ code generator to use a different
-  // representation of the field than it normally would.  See the specific
-  // options below.  This option is not yet implemented in the open source
-  // release -- sorry, we'll try to include it in a future version!
-  optional CType ctype = 1 [default = STRING];
-  enum CType {
-    // Default mode.
-    STRING = 0;
-
-    CORD = 1;
-
-    STRING_PIECE = 2;
-  }
-  // The packed option can be enabled for repeated primitive fields to enable
-  // a more efficient representation on the wire. Rather than repeatedly
-  // writing the tag and type for each element, the entire array is encoded as
-  // a single length-delimited blob. In proto3, only explicit setting it to
-  // false will avoid using packed encoding.
-  optional bool packed = 2;
-
-
-  // The jstype option determines the JavaScript type used for values of the
-  // field.  The option is permitted only for 64 bit integral and fixed types
-  // (int64, uint64, sint64, fixed64, sfixed64).  By default these types are
-  // represented as JavaScript strings.  This avoids loss of precision that can
-  // happen when a large value is converted to a floating point JavaScript
-  // numbers.  Specifying JS_NUMBER for the jstype causes the generated
-  // JavaScript code to use the JavaScript "number" type instead of strings.
-  // This option is an enum to permit additional types to be added,
-  // e.g. goog.math.Integer.
-  optional JSType jstype = 6 [default = JS_NORMAL];
-  enum JSType {
-    // Use the default type.
-    JS_NORMAL = 0;
-
-    // Use JavaScript strings.
-    JS_STRING = 1;
-
-    // Use JavaScript numbers.
-    JS_NUMBER = 2;
-  }
-
-  // Should this field be parsed lazily?  Lazy applies only to message-type
-  // fields.  It means that when the outer message is initially parsed, the
-  // inner message's contents will not be parsed but instead stored in encoded
-  // form.  The inner message will actually be parsed when it is first accessed.
-  //
-  // This is only a hint.  Implementations are free to choose whether to use
-  // eager or lazy parsing regardless of the value of this option.  However,
-  // setting this option true suggests that the protocol author believes that
-  // using lazy parsing on this field is worth the additional bookkeeping
-  // overhead typically needed to implement it.
-  //
-  // This option does not affect the public interface of any generated code;
-  // all method signatures remain the same.  Furthermore, thread-safety of the
-  // interface is not affected by this option; const methods remain safe to
-  // call from multiple threads concurrently, while non-const methods continue
-  // to require exclusive access.
-  //
-  //
-  // Note that implementations may choose not to check required fields within
-  // a lazy sub-message.  That is, calling IsInitialized() on the outher message
-  // may return true even if the inner message has missing required fields.
-  // This is necessary because otherwise the inner message would have to be
-  // parsed in order to perform the check, defeating the purpose of lazy
-  // parsing.  An implementation which chooses not to check required fields
-  // must be consistent about it.  That is, for any particular sub-message, the
-  // implementation must either *always* check its required fields, or *never*
-  // check its required fields, regardless of whether or not the message has
-  // been parsed.
-  optional bool lazy = 5 [default=false];
-
-  // Is this field deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for accessors, or it will be completely ignored; in the very least, this
-  // is a formalization for deprecating fields.
-  optional bool deprecated = 3 [default=false];
-
-  // For Google-internal migration only. Do not use.
-  optional bool weak = 10 [default=false];
-
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message EnumOptions {
-
-  // Set this option to true to allow mapping different tag names to the same
-  // value.
-  optional bool allow_alias = 2;
-
-  // Is this enum deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the enum, or it will be completely ignored; in the very least, this
-  // is a formalization for deprecating enums.
-  optional bool deprecated = 3 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message EnumValueOptions {
-  // Is this enum value deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the enum value, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating enum values.
-  optional bool deprecated = 1 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message ServiceOptions {
-
-  // Note:  Field numbers 1 through 32 are reserved for Google's internal RPC
-  //   framework.  We apologize for hoarding these numbers to ourselves, but
-  //   we were already using them long before we decided to release Protocol
-  //   Buffers.
-
-  // Is this service deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the service, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating services.
-  optional bool deprecated = 33 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message MethodOptions {
-
-  // Note:  Field numbers 1 through 32 are reserved for Google's internal RPC
-  //   framework.  We apologize for hoarding these numbers to ourselves, but
-  //   we were already using them long before we decided to release Protocol
-  //   Buffers.
-
-  // Is this method deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the method, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating methods.
-  optional bool deprecated = 33 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-
-// A message representing a option the parser does not recognize. This only
-// appears in options protos created by the compiler::Parser class.
-// DescriptorPool resolves these when building Descriptor objects. Therefore,
-// options protos in descriptor objects (e.g. returned by Descriptor::options(),
-// or produced by Descriptor::CopyTo()) will never have UninterpretedOptions
-// in them.
-message UninterpretedOption {
-  // The name of the uninterpreted option.  Each string represents a segment in
-  // a dot-separated name.  is_extension is true iff a segment represents an
-  // extension (denoted with parentheses in options specs in .proto files).
-  // E.g.,{ ["foo", false], ["bar.baz", true], ["qux", false] } represents
-  // "foo.(bar.baz).qux".
-  message NamePart {
-    required string name_part = 1;
-    required bool is_extension = 2;
-  }
-  repeated NamePart name = 2;
-
-  // The value of the uninterpreted option, in whatever type the tokenizer
-  // identified it as during parsing. Exactly one of these should be set.
-  optional string identifier_value = 3;
-  optional uint64 positive_int_value = 4;
-  optional int64 negative_int_value = 5;
-  optional double double_value = 6;
-  optional bytes string_value = 7;
-  optional string aggregate_value = 8;
-}
-
-// ===================================================================
-// Optional source code info
-
-// Encapsulates information about the original source file from which a
-// FileDescriptorProto was generated.
-message SourceCodeInfo {
-  // A Location identifies a piece of source code in a .proto file which
-  // corresponds to a particular definition.  This information is intended
-  // to be useful to IDEs, code indexers, documentation generators, and similar
-  // tools.
-  //
-  // For example, say we have a file like:
-  //   message Foo {
-  //     optional string foo = 1;
-  //   }
-  // Let's look at just the field definition:
-  //   optional string foo = 1;
-  //   ^       ^^     ^^  ^  ^^^
-  //   a       bc     de  f  ghi
-  // We have the following locations:
-  //   span   path               represents
-  //   [a,i)  [ 4, 0, 2, 0 ]     The whole field definition.
-  //   [a,b)  [ 4, 0, 2, 0, 4 ]  The label (optional).
-  //   [c,d)  [ 4, 0, 2, 0, 5 ]  The type (string).
-  //   [e,f)  [ 4, 0, 2, 0, 1 ]  The name (foo).
-  //   [g,h)  [ 4, 0, 2, 0, 3 ]  The number (1).
-  //
-  // Notes:
-  // - A location may refer to a repeated field itself (i.e. not to any
-  //   particular index within it).  This is used whenever a set of elements are
-  //   logically enclosed in a single code segment.  For example, an entire
-  //   extend block (possibly containing multiple extension definitions) will
-  //   have an outer location whose path refers to the "extensions" repeated
-  //   field without an index.
-  // - Multiple locations may have the same path.  This happens when a single
-  //   logical declaration is spread out across multiple places.  The most
-  //   obvious example is the "extend" block again -- there may be multiple
-  //   extend blocks in the same scope, each of which will have the same path.
-  // - A location's span is not always a subset of its parent's span.  For
-  //   example, the "extendee" of an extension declaration appears at the
-  //   beginning of the "extend" block and is shared by all extensions within
-  //   the block.
-  // - Just because a location's span is a subset of some other location's span
-  //   does not mean that it is a descendent.  For example, a "group" defines
-  //   both a type and a field in a single declaration.  Thus, the locations
-  //   corresponding to the type and field and their components will overlap.
-  // - Code which tries to interpret locations should probably be designed to
-  //   ignore those that it doesn't understand, as more types of locations could
-  //   be recorded in the future.
-  repeated Location location = 1;
-  message Location {
-    // Identifies which part of the FileDescriptorProto was defined at this
-    // location.
-    //
-    // Each element is a field number or an index.  They form a path from
-    // the root FileDescriptorProto to the place where the definition.  For
-    // example, this path:
-    //   [ 4, 3, 2, 7, 1 ]
-    // refers to:
-    //   file.message_type(3)  // 4, 3
-    //       .field(7)         // 2, 7
-    //       .name()           // 1
-    // This is because FileDescriptorProto.message_type has field number 4:
-    //   repeated DescriptorProto message_type = 4;
-    // and DescriptorProto.field has field number 2:
-    //   repeated FieldDescriptorProto field = 2;
-    // and FieldDescriptorProto.name has field number 1:
-    //   optional string name = 1;
-    //
-    // Thus, the above path gives the location of a field name.  If we removed
-    // the last element:
-    //   [ 4, 3, 2, 7 ]
-    // this path refers to the whole field declaration (from the beginning
-    // of the label to the terminating semicolon).
-    repeated int32 path = 1 [packed=true];
-
-    // Always has exactly three or four elements: start line, start column,
-    // end line (optional, otherwise assumed same as start line), end column.
-    // These are packed into a single field for efficiency.  Note that line
-    // and column numbers are zero-based -- typically you will want to add
-    // 1 to each before displaying to a user.
-    repeated int32 span = 2 [packed=true];
-
-    // If this SourceCodeInfo represents a complete declaration, these are any
-    // comments appearing before and after the declaration which appear to be
-    // attached to the declaration.
-    //
-    // A series of line comments appearing on consecutive lines, with no other
-    // tokens appearing on those lines, will be treated as a single comment.
-    //
-    // leading_detached_comments will keep paragraphs of comments that appear
-    // before (but not connected to) the current element. Each paragraph,
-    // separated by empty lines, will be one comment element in the repeated
-    // field.
-    //
-    // Only the comment content is provided; comment markers (e.g. //) are
-    // stripped out.  For block comments, leading whitespace and an asterisk
-    // will be stripped from the beginning of each line other than the first.
-    // Newlines are included in the output.
-    //
-    // Examples:
-    //
-    //   optional int32 foo = 1;  // Comment attached to foo.
-    //   // Comment attached to bar.
-    //   optional int32 bar = 2;
-    //
-    //   optional string baz = 3;
-    //   // Comment attached to baz.
-    //   // Another line attached to baz.
-    //
-    //   // Comment attached to qux.
-    //   //
-    //   // Another line attached to qux.
-    //   optional double qux = 4;
-    //
-    //   // Detached comment for corge. This is not leading or trailing comments
-    //   // to qux or corge because there are blank lines separating it from
-    //   // both.
-    //
-    //   // Detached comment for corge paragraph 2.
-    //
-    //   optional string corge = 5;
-    //   /* Block comment attached
-    //    * to corge.  Leading asterisks
-    //    * will be removed. */
-    //   /* Block comment attached to
-    //    * grault. */
-    //   optional int32 grault = 6;
-    //
-    //   // ignored detached comments.
-    optional string leading_comments = 3;
-    optional string trailing_comments = 4;
-    repeated string leading_detached_comments = 6;
-  }
-}
\ No newline at end of file