summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/podman.1.md10
-rw-r--r--libpod/container.go3
-rw-r--r--libpod/container_internal_linux.go21
-rw-r--r--libpod/networking_linux.go60
-rw-r--r--libpod/oci_internal_linux.go16
-rw-r--r--libpod/oci_linux.go8
-rw-r--r--libpod/runtime.go2
-rw-r--r--libpod/runtime_pod_infra_linux.go4
-rw-r--r--pkg/netns/netns_linux.go30
-rw-r--r--pkg/spec/createconfig.go2
-rw-r--r--pkg/util/utils_supported.go4
-rw-r--r--troubleshooting.md50
12 files changed, 169 insertions, 41 deletions
diff --git a/docs/podman.1.md b/docs/podman.1.md
index bfb5a9aec..12b7866ca 100644
--- a/docs/podman.1.md
+++ b/docs/podman.1.md
@@ -223,7 +223,7 @@ When Podman runs in rootless mode, the file `$HOME/.config/containers/mounts.con
## Rootless mode
Podman can also be used as non-root user. When podman runs in rootless mode, a user namespace is automatically created for the user, defined in /etc/subuid and /etc/subgid.
-Containers created by a non-root user are not visible to other users and are not seen or managed by podman running as root.
+Containers created by a non-root user are not visible to other users and are not seen or managed by Podman running as root.
It is required to have multiple uids/gids set for an user. Be sure the user is present in the files `/etc/subuid` and `/etc/subgid`.
@@ -244,6 +244,14 @@ Images are pulled under `XDG_DATA_HOME` when specified, otherwise in the home di
Currently the slirp4netns package is required to be installed to create a network device, otherwise rootless containers need to run in the network namespace of the host.
+### **NOTE:** Unsupported file systems in rootless mode
+
+The Overlay file system (OverlayFS) is not supported in rootless mode. The fuse-overlayfs package is a tool that provides the functionality of OverlayFS in user namespace that allows mounting file systems in rootless environments. It is recommended to install the fuse-overlayfs package and to enable it by adding `mount_program = "/usr/bin/fuse-overlayfs"` under `[storage.options]` in the `~/.config/containers/storage.conf` file.
+
+The Network File System (NFS) and other distributed file systems (for example: Lustre, Spectrum Scale, the General Parallel File System (GPFS)) are not supported when running in rootless mode as these file systems do not understand user namespace. However, rootless Podman can make use of an NFS Homedir by modifying the `~/.config/containers/storage.conf` to have the `graphroot` option point to a directory stored on local (Non NFS) storage.
+
+For more information, please refer to the [Podman Troubleshooting Page](https://github.com/containers/libpod/blob/master/troubleshooting.md).
+
## SEE ALSO
`containers-mounts.conf(5)`, `containers-registries.conf(5)`, `containers-storage.conf(5)`, `buildah(1)`, `libpod.conf(5)`, `oci-hooks(5)`, `policy.json(5)`, `subuid(5)`, `subgid(5)`, `slirp4netns(1)`
diff --git a/libpod/container.go b/libpod/container.go
index 2d96b1120..9c01d2adf 100644
--- a/libpod/container.go
+++ b/libpod/container.go
@@ -377,6 +377,9 @@ type ContainerConfig struct {
RestartRetries uint `json:"restart_retries,omitempty"`
// TODO log options for log drivers
+ // PostConfigureNetNS needed when a user namespace is created by an OCI runtime
+ // if the network namespace is created before the user namespace it will be
+ // owned by the wrong user namespace.
PostConfigureNetNS bool `json:"postConfigureNetNS"`
// OCIRuntime used to create the container
diff --git a/libpod/container_internal_linux.go b/libpod/container_internal_linux.go
index 6dbd53fbf..57c2854ea 100644
--- a/libpod/container_internal_linux.go
+++ b/libpod/container_internal_linux.go
@@ -63,12 +63,12 @@ func (c *Container) unmountSHM(mount string) error {
// namespaces
func (c *Container) prepare() (err error) {
var (
- wg sync.WaitGroup
- netNS ns.NetNS
- networkStatus []*cnitypes.Result
- createNetNSErr, mountStorageErr error
- mountPoint string
- tmpStateLock sync.Mutex
+ wg sync.WaitGroup
+ netNS ns.NetNS
+ networkStatus []*cnitypes.Result
+ createNetNSErr, mountStorageErr, rootlessSetupErr error
+ mountPoint string
+ tmpStateLock sync.Mutex
)
wg.Add(2)
@@ -87,6 +87,11 @@ func (c *Container) prepare() (err error) {
c.state.NetNS = netNS
c.state.NetworkStatus = networkStatus
}
+
+ // Setup rootless networking, requires c.state.NetNS to be set
+ if rootless.IsRootless() {
+ rootlessSetupErr = c.runtime.setupRootlessNetNS(c)
+ }
}
}()
// Mount storage if not mounted
@@ -132,6 +137,10 @@ func (c *Container) prepare() (err error) {
return mountStorageErr
}
+ if rootlessSetupErr != nil {
+ return rootlessSetupErr
+ }
+
// Save the container
return c.save()
}
diff --git a/libpod/networking_linux.go b/libpod/networking_linux.go
index bef3f7739..73e839bda 100644
--- a/libpod/networking_linux.go
+++ b/libpod/networking_linux.go
@@ -103,9 +103,6 @@ func (r *Runtime) configureNetNS(ctr *Container, ctrNS ns.NetNS) ([]*cnitypes.Re
// Create and configure a new network namespace for a container
func (r *Runtime) createNetNS(ctr *Container) (n ns.NetNS, q []*cnitypes.Result, err error) {
- if rootless.IsRootless() {
- return nil, nil, errors.New("cannot configure a new network namespace in rootless mode, only --network=slirp4netns is supported")
- }
ctrNS, err := netns.NewNS()
if err != nil {
return nil, nil, errors.Wrapf(err, "error creating network namespace for container %s", ctr.ID())
@@ -123,7 +120,10 @@ func (r *Runtime) createNetNS(ctr *Container) (n ns.NetNS, q []*cnitypes.Result,
logrus.Debugf("Made network namespace at %s for container %s", ctrNS.Path(), ctr.ID())
- networkStatus, err := r.configureNetNS(ctr, ctrNS)
+ networkStatus := []*cnitypes.Result{}
+ if !rootless.IsRootless() {
+ networkStatus, err = r.configureNetNS(ctr, ctrNS)
+ }
return ctrNS, networkStatus, err
}
@@ -151,9 +151,6 @@ func checkSlirpFlags(path string) (bool, bool, error) {
// Configure the network namespace for a rootless container
func (r *Runtime) setupRootlessNetNS(ctr *Container) (err error) {
- defer errorhandling.CloseQuiet(ctr.rootlessSlirpSyncR)
- defer errorhandling.CloseQuiet(ctr.rootlessSlirpSyncW)
-
path := r.config.NetworkCmdPath
if path == "" {
@@ -177,7 +174,7 @@ func (r *Runtime) setupRootlessNetNS(ctr *Container) (err error) {
cmdArgs := []string{}
if havePortMapping {
- cmdArgs = append(cmdArgs, "--api-socket", apiSocket, fmt.Sprintf("%d", ctr.state.PID))
+ cmdArgs = append(cmdArgs, "--api-socket", apiSocket)
}
dhp, mtu, err := checkSlirpFlags(path)
if err != nil {
@@ -189,13 +186,27 @@ func (r *Runtime) setupRootlessNetNS(ctr *Container) (err error) {
if mtu {
cmdArgs = append(cmdArgs, "--mtu", "65520")
}
- cmdArgs = append(cmdArgs, "-c", "-e", "3", "-r", "4", fmt.Sprintf("%d", ctr.state.PID), "tap0")
- cmd := exec.Command(path, cmdArgs...)
+ cmdArgs = append(cmdArgs, "-c", "-e", "3", "-r", "4")
+ if !ctr.config.PostConfigureNetNS {
+ ctr.rootlessSlirpSyncR, ctr.rootlessSlirpSyncW, err = os.Pipe()
+ if err != nil {
+ return errors.Wrapf(err, "failed to create rootless network sync pipe")
+ }
+ cmdArgs = append(cmdArgs, "--netns-type=path", ctr.state.NetNS.Path(), "tap0")
+ } else {
+ defer errorhandling.CloseQuiet(ctr.rootlessSlirpSyncR)
+ defer errorhandling.CloseQuiet(ctr.rootlessSlirpSyncW)
+ cmdArgs = append(cmdArgs, fmt.Sprintf("%d", ctr.state.PID), "tap0")
+ }
+ cmd := exec.Command(path, cmdArgs...)
+ logrus.Debugf("slirp4netns command: %s", strings.Join(cmd.Args, " "))
cmd.SysProcAttr = &syscall.SysProcAttr{
Setpgid: true,
}
+
+ // Leak one end of the pipe in slirp4netns, the other will be sent to conmon
cmd.ExtraFiles = append(cmd.ExtraFiles, ctr.rootlessSlirpSyncR, syncW)
if err := cmd.Start(); err != nil {
@@ -410,22 +421,25 @@ func (r *Runtime) teardownNetNS(ctr *Container) error {
}
}
- logrus.Debugf("Tearing down network namespace at %s for container %s", ctr.state.NetNS.Path(), ctr.ID())
+ logrus.Debugf("Tearing down network namespace for container %s", ctr.ID())
- var requestedIP net.IP
- if ctr.requestedIP != nil {
- requestedIP = ctr.requestedIP
- // cancel request for a specific IP in case the container is reused later
- ctr.requestedIP = nil
- } else {
- requestedIP = ctr.config.StaticIP
- }
+ // rootless containers do not use the CNI plugin
+ if !rootless.IsRootless() {
+ var requestedIP net.IP
+ if ctr.requestedIP != nil {
+ requestedIP = ctr.requestedIP
+ // cancel request for a specific IP in case the container is reused later
+ ctr.requestedIP = nil
+ } else {
+ requestedIP = ctr.config.StaticIP
+ }
- podNetwork := r.getPodNetwork(ctr.ID(), ctr.Name(), ctr.state.NetNS.Path(), ctr.config.Networks, ctr.config.PortMappings, requestedIP)
+ podNetwork := r.getPodNetwork(ctr.ID(), ctr.Name(), ctr.state.NetNS.Path(), ctr.config.Networks, ctr.config.PortMappings, requestedIP)
- // The network may have already been torn down, so don't fail here, just log
- if err := r.netPlugin.TearDownPod(podNetwork); err != nil {
- return errors.Wrapf(err, "error tearing down CNI namespace configuration for container %s", ctr.ID())
+ // The network may have already been torn down, so don't fail here, just log
+ if err := r.netPlugin.TearDownPod(podNetwork); err != nil {
+ return errors.Wrapf(err, "error tearing down CNI namespace configuration for container %s", ctr.ID())
+ }
}
// First unmount the namespace
diff --git a/libpod/oci_internal_linux.go b/libpod/oci_internal_linux.go
index 0bcd021db..28e4b5b82 100644
--- a/libpod/oci_internal_linux.go
+++ b/libpod/oci_internal_linux.go
@@ -130,10 +130,16 @@ func (r *OCIRuntime) createOCIContainer(ctr *Container, restoreOptions *Containe
}
if ctr.config.NetMode.IsSlirp4netns() {
- ctr.rootlessSlirpSyncR, ctr.rootlessSlirpSyncW, err = os.Pipe()
- if err != nil {
- return errors.Wrapf(err, "failed to create rootless network sync pipe")
+ if ctr.config.PostConfigureNetNS {
+ ctr.rootlessSlirpSyncR, ctr.rootlessSlirpSyncW, err = os.Pipe()
+ if err != nil {
+ return errors.Wrapf(err, "failed to create rootless network sync pipe")
+ }
+ } else {
+ defer errorhandling.CloseQuiet(ctr.rootlessSlirpSyncR)
+ defer errorhandling.CloseQuiet(ctr.rootlessSlirpSyncW)
}
+
// Leak one end in conmon, the other one will be leaked into slirp4netns
cmd.ExtraFiles = append(cmd.ExtraFiles, ctr.rootlessSlirpSyncW)
}
@@ -278,6 +284,10 @@ func (r *OCIRuntime) sharedConmonArgs(ctr *Container, cuuid, bundlePath, pidPath
// No case here should happen except JSONLogging, but keep this here in case the options are extended
logrus.Errorf("%s logging specified but not supported. Choosing k8s-file logging instead", ctr.LogDriver())
fallthrough
+ case "":
+ // to get here, either a user would specify `--log-driver ""`, or this came from another place in libpod
+ // since the former case is obscure, and the latter case isn't an error, let's silently fallthrough
+ fallthrough
case KubernetesLogging:
logDriver = fmt.Sprintf("%s:%s", KubernetesLogging, logPath)
}
diff --git a/libpod/oci_linux.go b/libpod/oci_linux.go
index 45365203e..4d8e36516 100644
--- a/libpod/oci_linux.go
+++ b/libpod/oci_linux.go
@@ -405,6 +405,14 @@ func (r *OCIRuntime) stopContainer(ctr *Container, timeout uint) error {
stopSignal = uint(syscall.SIGTERM)
}
+ defer func() {
+ // cleanup container networking
+ err = ctr.cleanupNetwork()
+ if err != nil {
+ logrus.Errorf("Error cleaning up container: %s network: %v", ctr.ID(), err)
+ }
+ }()
+
if timeout > 0 {
if err := r.killContainer(ctr, stopSignal); err != nil {
// Is the container gone?
diff --git a/libpod/runtime.go b/libpod/runtime.go
index ffdbc32f1..b66b68cfd 100644
--- a/libpod/runtime.go
+++ b/libpod/runtime.go
@@ -52,7 +52,7 @@ const (
var (
// InstallPrefix is the prefix where podman will be installed.
// It can be overridden at build time.
- installPrefix = "/usr/local"
+ installPrefix = "/usr"
// EtcDir is the sysconfdir where podman should look for system config files.
// It can be overridden at build time.
etcDir = "/etc"
diff --git a/libpod/runtime_pod_infra_linux.go b/libpod/runtime_pod_infra_linux.go
index da35b7f93..20b841296 100644
--- a/libpod/runtime_pod_infra_linux.go
+++ b/libpod/runtime_pod_infra_linux.go
@@ -95,7 +95,9 @@ func (r *Runtime) makeInfraContainer(ctx context.Context, p *Pod, imgName, imgID
if isRootless {
netmode = "slirp4netns"
}
- options = append(options, WithNetNS(p.config.InfraContainer.PortBindings, isRootless, netmode, networks))
+ // PostConfigureNetNS should not be set since user namespace sharing is not implemented
+ // and rootless networking no longer supports post configuration setup
+ options = append(options, WithNetNS(p.config.InfraContainer.PortBindings, false, netmode, networks))
return r.newContainer(ctx, g.Config, options...)
}
diff --git a/pkg/netns/netns_linux.go b/pkg/netns/netns_linux.go
index 1d6fb873c..e8388055a 100644
--- a/pkg/netns/netns_linux.go
+++ b/pkg/netns/netns_linux.go
@@ -23,23 +23,42 @@ import (
"fmt"
"os"
"path"
+ "path/filepath"
"runtime"
"strings"
"sync"
"github.com/containernetworking/plugins/pkg/ns"
+ "github.com/containers/libpod/pkg/rootless"
+ "github.com/containers/libpod/pkg/util"
"github.com/sirupsen/logrus"
"golang.org/x/sys/unix"
)
-const nsRunDir = "/var/run/netns"
+// get NSRunDir returns the dir of where to create the netNS. When running
+// rootless, it needs to be at a location writable by user.
+func getNSRunDir() (string, error) {
+ if rootless.IsRootless() {
+ rootlessDir, err := util.GetRootlessRuntimeDir()
+ if err != nil {
+ return "", err
+ }
+ return filepath.Join(rootlessDir, "netns"), nil
+ }
+ return "/var/run/netns", nil
+}
// NewNS creates a new persistent (bind-mounted) network namespace and returns
// an object representing that namespace, without switching to it.
func NewNS() (ns.NetNS, error) {
+ nsRunDir, err := getNSRunDir()
+ if err != nil {
+ return nil, err
+ }
+
b := make([]byte, 16)
- _, err := rand.Reader.Read(b)
+ _, err = rand.Reader.Read(b)
if err != nil {
return nil, fmt.Errorf("failed to generate random netns name: %v", err)
}
@@ -127,7 +146,7 @@ func NewNS() (ns.NetNS, error) {
// Put this thread back to the orig ns, since it might get reused (pre go1.10)
defer func() {
if err := origNS.Set(); err != nil {
- logrus.Errorf("unable to set namespace: %q", err)
+ logrus.Warnf("unable to set namespace: %q", err)
}
}()
@@ -150,6 +169,11 @@ func NewNS() (ns.NetNS, error) {
// UnmountNS unmounts the NS held by the netns object
func UnmountNS(ns ns.NetNS) error {
+ nsRunDir, err := getNSRunDir()
+ if err != nil {
+ return err
+ }
+
nsPath := ns.Path()
// Only unmount if it's been bind-mounted (don't touch namespaces in /proc...)
if strings.HasPrefix(nsPath, nsRunDir) {
diff --git a/pkg/spec/createconfig.go b/pkg/spec/createconfig.go
index f21ae2831..289634a0d 100644
--- a/pkg/spec/createconfig.go
+++ b/pkg/spec/createconfig.go
@@ -270,7 +270,7 @@ func (c *CreateConfig) getContainerCreateOptions(runtime *libpod.Runtime, pod *l
options = append(options, libpod.WithNetNSFrom(connectedCtr))
} else if !c.NetMode.IsHost() && !c.NetMode.IsNone() {
hasUserns := c.UsernsMode.IsContainer() || c.UsernsMode.IsNS() || len(c.IDMappings.UIDMap) > 0 || len(c.IDMappings.GIDMap) > 0
- postConfigureNetNS := c.NetMode.IsSlirp4netns() || (hasUserns && !c.UsernsMode.IsHost())
+ postConfigureNetNS := hasUserns && !c.UsernsMode.IsHost()
options = append(options, libpod.WithNetNS(portBindings, postConfigureNetNS, string(c.NetMode), networks))
}
diff --git a/pkg/util/utils_supported.go b/pkg/util/utils_supported.go
index af55689a6..6449c6f85 100644
--- a/pkg/util/utils_supported.go
+++ b/pkg/util/utils_supported.go
@@ -26,7 +26,7 @@ func GetRootlessRuntimeDir() (string, error) {
if runtimeDir == "" {
tmpDir := filepath.Join("/run", "user", uid)
if err := os.MkdirAll(tmpDir, 0700); err != nil {
- logrus.Errorf("unable to make temp dir %s", tmpDir)
+ logrus.Debugf("unable to make temp dir %s", tmpDir)
}
st, err := os.Stat(tmpDir)
if err == nil && int(st.Sys().(*syscall.Stat_t).Uid) == os.Geteuid() && st.Mode().Perm() == 0700 {
@@ -36,7 +36,7 @@ func GetRootlessRuntimeDir() (string, error) {
if runtimeDir == "" {
tmpDir := filepath.Join(os.TempDir(), fmt.Sprintf("run-%s", uid))
if err := os.MkdirAll(tmpDir, 0700); err != nil {
- logrus.Errorf("unable to make temp dir %s", tmpDir)
+ logrus.Debugf("unable to make temp dir %s", tmpDir)
}
st, err := os.Stat(tmpDir)
if err == nil && int(st.Sys().(*syscall.Stat_t).Uid) == os.Geteuid() && st.Mode().Perm() == 0700 {
diff --git a/troubleshooting.md b/troubleshooting.md
index 64aec475e..798d9cec4 100644
--- a/troubleshooting.md
+++ b/troubleshooting.md
@@ -315,3 +315,53 @@ Not doing this will cause Podman in the container to detect that temporary files
This can cause Podman to reset container states and lose track of running containers.
For running containers on the host from inside a container, we also recommend the [Podman remote client](remote_client.md), which only requires a single socket to be mounted into the container.
+
+### 13) Rootless 'podman build' fails EPERM on NFS:
+
+NFS enforces file creation on different UIDs on the server side and does not understand user namespace, which rootless Podman requires.
+When a container root process like YUM attempts to create a file owned by a different UID, NFS Server denies the creation.
+NFS is also a problem for the file locks when the storage is on it. Other distributed file systems (for example: Lustre, Spectrum Scale, the General Parallel File System (GPFS)) are also not supported when running in rootless mode as these file systems do not understand user namespace.
+
+#### Symptom
+```console
+$ podman build .
+ERRO[0014] Error while applying layer: ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied
+error creating build container: Error committing the finished image: error adding layer with blob "sha256:a02a4930cb5d36f3290eb84f4bfa30668ef2e9fe3a1fb73ec015fc58b9958b17": ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied
+```
+
+#### Solution
+Choose one of the following:
+ * Setup containers/storage in a different directory, not on an NFS share.
+ * Create a directory on a local file system.
+ * Edit `~/.config/containers/libpod.conf` and point the `volume_path` option to that local directory.
+ * Otherwise just run podman as root, via `sudo podman`
+
+### 14) Rootless 'podman build' fails when using OverlayFS:
+
+The Overlay file system (OverlayFS) requires the ability to call the `mknod` command when creating whiteout files
+when extracting an image. However, a rootless user does not have the privileges to use `mknod` in this capacity.
+
+#### Symptom
+```console
+podman build --storage-driver overlay .
+STEP 1: FROM docker.io/ubuntu:xenial
+Getting image source signatures
+Copying blob edf72af6d627 done
+Copying blob 3e4f86211d23 done
+Copying blob 8d3eac894db4 done
+Copying blob f7277927d38a done
+Copying config 5e13f8dd4c done
+Writing manifest to image destination
+Storing signatures
+Error: error creating build container: Error committing the finished image: error adding layer with blob "sha256:8d3eac894db4dc4154377ad28643dfe6625ff0e54bcfa63e0d04921f1a8ef7f8": Error processing tar file(exit status 1): operation not permitted
+$ podman build .
+ERRO[0014] Error while applying layer: ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied
+error creating build container: Error committing the finished image: error adding layer with blob "sha256:a02a4930cb5d36f3290eb84f4bfa30668ef2e9fe3a1fb73ec015fc58b9958b17": ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied
+```
+
+#### Solution
+Choose one of the following:
+ * Complete the build operation as a privileged user.
+ * Install and configure fuse-overlayfs.
+ * Install the fuse-overlayfs package for your Linux Distribution.
+ * Add `mount_program = "/usr/bin/fuse-overlayfs` under `[storage.options]` in your `~/.config/containers/storage.conf` file.
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-05 21:30:26 +0000