diff options
Diffstat (limited to 'completions')
| -rw-r--r-- | completions/bash/podman | 1 | ||||
| -rw-r--r-- | completions/zsh/_podman | 385 |
2 files changed, 386 insertions, 0 deletions
diff --git a/completions/bash/podman b/completions/bash/podman index d8354fa80..1976bff44 100644 --- a/completions/bash/podman +++ b/completions/bash/podman @@ -2469,6 +2469,7 @@ _podman_container_runlabel() { -h -q --quiet + --replace --tls-verify " diff --git a/completions/zsh/_podman b/completions/zsh/_podman new file mode 100644 index 000000000..530649c0c --- /dev/null +++ b/completions/zsh/_podman @@ -0,0 +1,385 @@ +#compdef podman + +# To get zsh to reread this file: unset -f _podman;rm -f ~/.zcompdump;compinit + +# On rereads, reset cache. (Not that the cacheing works, but some day it might) +unset -m '_podman_*' + +############################################################################### +# BEGIN 'podman help' parsers -- for options, subcommands, and usage + +# Run 'podman XX --help', set _podman_commands to a formatted list of cmds +_read_podman_commands() { + local line + + # Cache: the intention here is to run each 'podman help' only once. + # Unfortunately it doesn't seem to actually be working: even though + # I can see the var_ref in my shell, it's not visible here. + local _var_ref=_podman_commands_"${*// /_}" + typeset -ga _podman_commands + _podman_commands=(${(P)_var_ref}) + (( $#_podman_commands )) && return + + _call_program podman podman "$@" --help |\ + sed -n -e '0,/^Available Commands/d' -e '/^[A-Z]/q;p' |\ + sed -e 's/^ \+\([^ ]\+\) \+/\1:/' |\ + egrep . | while read line; do + _podman_commands+=($line) + done + + eval "typeset -ga $_var_ref" + eval "$_var_ref=(\$_podman_commands)" +} + +# Run 'podman XX --help', set _podman_flag_list to a formatted list +# of flag options for XX +_read_podman_flags() { + local line + + local _var_ref=_podman_flags_"${*// /_}" + eval "typeset -ga ${_var_ref}" + typeset -ga _podman_flag_list + _podman_flag_list=(${(P)_var_ref}) + (( $#_podman_flag_list )) && return + + # Extract the Flags; strip leading whitespace; pack '-f, --foo' + # as '-f,--foo' (no space); then add '=' to '--foo string'. + # The result will be, e.g. '-f,--foo=string Description of Option' + _call_program podman podman "$@" --help |\ + sed -n -e '0,/^Flags:/d' -e '/^$/q;p' |\ + sed -e 's/^ *//' -e 's/^\(-.,\) --/\1--/' |\ + sed -e 's/^\(-[^ ]\+\) \([^ ]\+\) /\1=\2 /' |\ + while read flags desc;do + # flags like --foo=string: split into --foo & string + local -a tmpa + local optval= + tmpa=(${(s.=.)flags}) + if [ -n "$tmpa[2]" ]; then + flags=$tmpa[1] + optval=$tmpa[2] + fi + + # 'podman attach --detach-keys' includes ']' in help msg + desc=${desc//\]/\\]} + + for flag in ${(s:,:)flags}; do + if [ -n "$optval" ]; then + _podman_flag_list+=("${flag}[$desc]:$(_podman_find_helper ${flags} ${optval} ${desc})") + else + _podman_flag_list+=("${flag}[$desc]") + fi + done + done + + eval "typeset -ga $_var_ref=(\$_podman_flag_list)" +} + +# Run 'podman XXX --help', set _podman_usage to the line after "Usage:" +_read_podman_usage() { + local _var_ref=_podman_usage_"${*// /_}" + typeset -ga _podman_usage + _podman_usage=${(P)_var_ref} + (( $#_podman_usage )) && return + + _podman_usage=$(_call_program podman podman "$@" --help |\ + grep -A1 'Usage:'|\ + tail -1 |\ + sed -e 's/^ *//') + + eval "typeset -ga $_var_ref" + eval "$_var_ref=\$_podman_usage" +} + +# END 'podman help' parsers +############################################################################### +# BEGIN custom helpers for individual option arguments + +# Find a zsh helper for a given flag or command-line option +_podman_find_helper() { + local flags=$1 + local optval=$2 + local desc=$3 + local helper= + + # Yes, this is a lot of hardcoding. IMHO it's still better than + # hardcoding every possible podman option. + # FIXME: there are many more options that could use helpers. + if expr "$desc" : ".*[Dd]irectory" >/dev/null; then + optval="directory" + helper="_files -/" + elif expr "$desc" : ".*[Pp]ath" >/dev/null; then + optval="path" + helper=_files + elif [ "$flags" = "--cgroup-manager" ]; then + optval="cgroup manager" + helper="(cgroupfs systemd)" + elif [ "$flags" = "--log-level" ]; then + optval="log level" + # 'Log messages above specified level: debug, ... (default "...")' + # Strip off the description and all 'default' strings + desc=${desc/Log*:/} # debug, info, ... (default "...") + desc=${(S)desc//\(*\)/} # debug, info, ... or panic + desc=${desc//,/} # debug info ... or panic + desc=${desc// or / } # debug info ... panic + desc=${desc// / } # collapse multiple spaces + # FIXME: how to present values _in order_, not sorted alphabetically? + helper="($desc)" + fi + echo "$optval:$helper" +} + +# END custom helpers for individual option arguments +############################################################################### +# BEGIN helpers for command-line args (containers, images) + +__podman_helper_generic() { + local expl line + local -a results + + local foo1=$1; shift + local name=$2; shift + + _call_program $foo1 podman "$@" |\ + while read line; do + results+=(${=line}) + done + + _wanted $foo1 expl $name compadd ${(u)results} +} + +_podman_helper_image() { + __podman_helper_generic podman-images 'images' \ + images --format '{{.ID}}\ {{.Repository}}:{{.Tag}}' +} + +# FIXME: at some point, distinguish between running & stopped containers +_podman_helper_container() { + __podman_helper_generic podman-containers 'containers' \ + ps -a --format '{{.Names}}\ {{.ID}}' +} + +_podman_helper_pod() { + __podman_helper_generic podman-pods 'pods' pod list --format '{{.Name}}' +} + +_podman_helper_volume() { + __podman_helper_generic podman-volumes 'volumes' volume ls --format '{{.Name}}' +} + +# Combinations. This one seen in diff & inspect +_podman_helper_container-or-image() { + _podman_helper_image + _podman_helper_container +} + +# Seen in generate-kube +_podman_helper_container-or-pod() { + _podman_helper_container + _podman_helper_pod +} + +# For top and pod-top +_podman_helper_format-descriptors() { + __podman_helper_generic top-format-descriptors 'format descriptors' \ + top --list-descriptors +} + +# for push, login/logout, and trust +# FIXME: some day, use this to define a helper for IMAGE-PATH (in 'pull') +_podman_helper_registry() { + local expl + local -a registries + + # Suggestions for improvement more than welcome. + python3 -c 'from configparser import ConfigParser;cp=ConfigParser();cp.read("/etc/containers/registries.conf");registries=eval(cp.get("registries.search","registries"));[print(r) for r in registries]' 2>/dev/null | while read line; do + registries+=($line) + done + + if (( $#registries )); then + _wanted podman-registry expl "registry" compadd ${(u)registries} + else + _hosts + fi +} + +# END helpers for command-line args +############################################################################### +# BEGIN figure out completion helpers for a given (sub)command + +# Read Usage string for this subcommand, set up helpers for its subargs +_set_up_podman_args() { + _read_podman_usage "$@" + + typeset -ga _podman_args=() + # E.g. 'podman exec [flags] CONTAINER [...' -> 'CONTAINER [....' + local usage_rhs=$(expr "$_podman_usage" : ".*\[flags\] \+\(.*\)") + + # e.g. podman pod ps which takes no further args + if [ -z "$usage_rhs" ]; then + return + fi + + # podman diff & inspect accept 'CONTAINER | IMAGE'; make into one keyword. + usage_rhs=${usage_rhs// | /-OR-} + + # Arg parsing. There are three possibilities in Usage messages: + # + # [IMAGE] - optional image arg (zero or one) + # IMAGE - exactly one image arg + # IMAGE [IMAGE...] - one or more image args + # and, theoretically: + # [IMAGE...] - zero or more? Haven't seen it in practice. Defer. + # + # For completion purposes, we only need to provide two options: + # one, or more than one? That is: continue offering completion + # suggestions after the first one? For that, we make two passes; + # in the first, mark an option as either '' (only one) or + + # Parse each command-line arg seen in usage message + local word + local -A _seen=() + for word in ${=usage_rhs}; do + local unbracketed=$(expr "$word" : "\[\(.*\)\]") + + if [ -n "$unbracketed" ]; then + # Remove all dots; assume(!?) that they'll all be at the end + unbracketed=${unbracketed//./} + + if (( $_seen[$unbracketed] )); then + # Is this the same word as the previous arg? + if expr "$_podman_args[-1]" : ":$unbracketed:" >/dev/null; then + # Yes. Make it '*:...' instead of ':...', indicating >1 + _podman_args[-1]="*$_podman_args[-1]" + fi + continue + fi + + word=$unbracketed + fi + + # As of 2019-03 all such instances are '[COMMAND [ARG...]]' and are, + # of course, at the end of the line. We can't offer completion for + # these, because the container will have different commands than + # the host system... but try anyway. + if [ "$word" = '[COMMAND' ]; then + # e.g. podman create, exec, run + _podman_args+=( + ":command: _command_names -e" + "*::arguments: _normal" + ) + return + fi + + # Look for an existing helper, e.g. IMAGE -> _podman_helper_image + local helper="_podman_helper_${(L)word}" + if (( $+functions[$helper] )); then + : + else + # No defined helper. Reset, but check for known expressions. + helper= + case "$word" in + KUBEFILE) helper='_files -g "*.y(|a)ml(-.)"' ;; + PATH) helper='_files' ;; + esac + fi + + # Another special case: 'top' actually takes multiple options + local multi= + if [ "$word" = "FORMAT-DESCRIPTORS" ]; then + multi='*' + fi + _podman_args+=("$multi:${(L)word}:$helper") + _seen[$word]=1 + done +} + +# For an endpoint command, i.e. not a subcommand. +_podman_terminus() { + typeset -A opt_args + typeset -ga _podman_flag_list + typeset -ga _podman_args + integer ret=1 + + # Find out what args it takes (e.g. image(s), container(s)) and see + # if we have helpers for them. + _set_up_podman_args "$@" + _arguments -C $_podman_flag_list $_podman_args && ret=0 + + return ret +} + +# END figure out completion helpers for a given (sub)command +################################################################################ +# BEGIN actual entry point + +# This is the main entry point; it's also where we (recursively) come in +# to handle nested subcommands such as 'podman container' or even 3-level +# ones like 'podman generate kube'. Nesting is complicated, so here's +# my best understanding as of 2019-03-12: +# +# Easy first: when you do "podman <TAB>" zsh calls us, we run 'podman --help', +# figure out the global options and subcommands, and run the magic _arguments +# command. That will offer those options/subcommands, and complete, etc. +# +# Where it gets harder is when you do "podman container mount <TAB>". +# zsh first calls us with words=(podman container mount) but we don't +# want all that full context yet! We want to go a piece at a time, +# handling 'container' first, then 'mount'; ending up with our +# final 'podman container mount --help' giving us suitable flags +# and no subcommands; from which we determine that it's a terminus +# and jump to a function that handles non-subcommand arguments. +# +# This is the closest I've yet come to understanding zsh completion; +# it is still incomplete and may in fact be incorrect. But it works +# better than anything I've played with so far. +_podman_subcommand() { + local curcontext="$curcontext" state line + typeset -A opt_args + integer ret=1 + + # Run 'podman --help' / 'podman system --help' for our context (initially + # empty, then possibly under subcommands); from those, get a list of + # flags appropriate for this context and, if applicable, subcommands. + _read_podman_flags "$@" + _read_podman_commands "$@" + + # Now, is this a sub-subcommand, or does it have args? + if (( $#_podman_commands )); then + # Subcommands required (podman, podman system, etc) + local cmd=${words// /_} + _arguments -C $_podman_flag_list \ + "(-): :->command" \ + "(-)*:: :->option-or-argument" \ + && ret=0 + + case $state in + (command) + _describe -t command "podman $* command" _podman_commands && ret=0 + ;; + (option-or-argument) + # I think this is when we have a _completed_ subcommand. + # Recurse back into here, offering options for that subcommand. + curcontext=${curcontext%:*:*}:podman-${words[1]}: + _podman_subcommand "$@" ${words[1]} && ret=0 + ;; + esac + else + # At a terminus, i.e. podman info, podman history; find out + # what args it takes. + _podman_terminus "$@" && ret=0 + fi + + return ret +} + +_podman() { + _podman_subcommand +} + +# Local Variables: +# mode: shell-script +# sh-indentation: 4 +# indent-tabs-mode: nil +# sh-basic-offset: 4 +# End: +# vim: ft=zsh sw=4 ts=4 et |