diff options
Diffstat (limited to 'docs/source/markdown/podman-create.1.md')
| -rw-r--r-- | docs/source/markdown/podman-create.1.md | 176 |
1 files changed, 111 insertions, 65 deletions
diff --git a/docs/source/markdown/podman-create.1.md b/docs/source/markdown/podman-create.1.md index 5e73804ab..843e2b22f 100644 --- a/docs/source/markdown/podman-create.1.md +++ b/docs/source/markdown/podman-create.1.md @@ -22,12 +22,54 @@ Default settings for flags are defined in `containers.conf`. Most settings for remote connections use the server's containers.conf, except when documented in man pages. +## IMAGE + + The image is specified using transport:path format. If no transport is specified, the `docker` (container registry) +transport will be used by default. For remote Podman, `docker` is the only allowed transport. + + **dir:**_path_ + An existing local directory _path_ storing the manifest, layer tarballs and signatures as individual files. This +is a non-standardized format, primarily useful for debugging or noninvasive container inspection. + + $ podman save --format docker-dir fedora -o /tmp/fedora + $ podman create dir:/tmp/fedora echo hello + + **docker://**_docker-reference_ (Default) + An image reference stored in a remote container image registry. Example: "quay.io/podman/stable:latest". +The reference can include a path to a specific registry; if it does not, the +registries listed in registries.conf will be queried to find a matching image. +By default, credentials from `podman login` (stored at +$XDG_RUNTIME_DIR/containers/auth.json by default) will be used to authenticate; +otherwise it falls back to using credentials in $HOME/.docker/config.json. + + $ podman create registry.fedoraproject.org/fedora:latest echo hello + + **docker-archive:**_path_[**:**_docker-reference_] +An image stored in the `docker save` formatted file. _docker-reference_ is only used when creating such a +file, and it must not contain a digest. + + $ podman save --format docker-archive fedora -o /tmp/fedora + $ podman create docker-archive:/tmp/fedora echo hello + + **docker-daemon:**_docker-reference_ + An image in _docker-reference_ format stored in the docker daemon internal storage. The _docker-reference_ can also be an image ID (docker-daemon:algo:digest). + + $ sudo docker pull fedora + $ sudo podman create docker-daemon:docker.io/library/fedora echo hello + + **oci-archive:**_path_**:**_tag_ + An image in a directory compliant with the "Open Container Image Layout Specification" at the specified _path_ +and specified with a _tag_. + + $ podman save --format oci-archive fedora -o /tmp/fedora + $ podman create oci-archive:/tmp/fedora echo hello + ## OPTIONS #### **--add-host**=*host* Add a custom host-to-IP mapping (host:ip) -Add a line to /etc/hosts. The format is hostname:ip. The **--add-host** +Add a line to /etc/hosts. The format is hostname:ip. The **--add-host** option can be set multiple times. #### **--annotation**=*key=value* @@ -77,7 +119,7 @@ Set the cgroup namespace mode for the container. **ns:<PATH>**: join the namespace at the specified path. **private**: create a new cgroup namespace. -If the host uses cgroups v1, the default is set to **host**. On cgroups v2 the default is **private**. +If the host uses cgroups v1, the default is set to **host**. On cgroups v2 the default is **private**. #### **--cgroups**=*mode* @@ -87,7 +129,7 @@ Valid values are *enabled*, *disabled*, *no-conmon*, *split*, which the default The *enabled* option will create a new cgroup under the cgroup-parent. The *disabled* option will force the container to not create CGroups, and thus conflicts with CGroup options (**--cgroupns** and **--cgroup-parent**). The *no-conmon* option disables a new CGroup only for the conmon process. -The *split* option splits the current cgroup in two sub-cgroups: one for conmon and one for the container payload. It is not possible to set *--cgroup-parent* with *split*. +The *split* option splits the current cgroup in two sub-cgroups: one for conmon and one for the container payload. It is not possible to set *--cgroup-parent* with *split*. #### **--cgroup-parent**=*path* @@ -95,7 +137,7 @@ Path to cgroups under which the cgroup for the container will be created. If the #### **--cgroup-conf**=*KEY=VALUE* -When running on cgroup v2, specify the cgroup file to write to and its value. For example **--cgroup-conf=memory.high=1073741824** sets the memory.high limit to 1GB. +When running on cgroup v2, specify the cgroup file to write to and its value. For example **--cgroup-conf=memory.high=1073741824** sets the memory.high limit to 1GB. #### **--cidfile**=*id* @@ -248,7 +290,7 @@ Limit write rate (IO per second) to a device (e.g. --device-write-iops=/dev/sda: #### **--disable-content-trust** This is a Docker specific option to disable image verification to a Docker -registry and is not supported by Podman. This flag is a NOOP and provided +registry and is not supported by Podman. This flag is a NOOP and provided solely for scripting compatibility. #### **--dns**=*dns* @@ -292,7 +334,7 @@ You need to specify multi option commands in the form of a json string. Set environment variables -This option allows arbitrary environment variables that are available for the process to be launched inside of the container. If an environment variable is specified without a value, Podman will check the host environment for a value and set the variable only if it is set on the host. If an environment variable ending in __*__ is specified, Podman will search the host environment for variables starting with the prefix and will add those variables to the container. If an environment variable with a trailing ***** is specified, then a value must be supplied. +This option allows arbitrary environment variables that are available for the process to be launched inside of the container. If an environment variable is specified without a value, Podman will check the host environment for a value and set the variable only if it is set on the host. If an environment variable ending in __*__ is specified, Podman will search the host environment for variables starting with the prefix and will add those variables to the container. If an environment variable with a trailing ***** is specified, then a value must be supplied. See [**Environment**](#environment) note below for precedence and examples. @@ -311,7 +353,7 @@ on the host system. #### **--gidmap**=*container_gid:host_gid:amount* -GID map for the user namespace. Using this flag will run the container with user namespace enabled. It conflicts with the `--userns` and `--subgidname` flags. +GID map for the user namespace. Using this flag will run the container with user namespace enabled. It conflicts with the `--userns` and `--subgidname` flags. The following example maps uids 0-2000 in the container to the uids 30000-31999 on the host and gids 0-2000 in the container to the gids 30000-31999 on the host. `--gidmap=0:30000:2000` @@ -322,8 +364,8 @@ Add additional groups to run as #### **--health-cmd**=*"command"* | *'["command", "arg1", ...]'* Set or alter a healthcheck command for a container. The command is a command to be executed inside your -container that determines your container health. The command is required for other healthcheck options -to be applied. A value of `none` disables existing healthchecks. +container that determines your container health. The command is required for other healthcheck options +to be applied. A value of `none` disables existing healthchecks. Multiple options can be passed in the form of a JSON array; otherwise, the command will be interpreted as an argument to `/bin/sh -c`. @@ -334,17 +376,17 @@ Set an interval for the healthchecks (a value of `disable` results in no automat #### **--health-retries**=*retries* -The number of retries allowed before a healthcheck is considered to be unhealthy. The default value is `3`. +The number of retries allowed before a healthcheck is considered to be unhealthy. The default value is `3`. #### **--health-start-period**=*period* The initialization time needed for a container to bootstrap. The value can be expressed in time format like -`2m3s`. The default value is `0s` +`2m3s`. The default value is `0s` #### **--health-timeout**=*timeout* -The maximum time allowed to complete the healthcheck before an interval is considered failed. Like start-period, the -value can be expressed in a time format such as `1m22s`. The default value is `30s`. +The maximum time allowed to complete the healthcheck before an interval is considered failed. Like start-period, the +value can be expressed in a time format such as `1m22s`. The default value is `30s`. #### **--hostname**=*name*, **-h** @@ -359,13 +401,13 @@ Print usage statement #### **--http-proxy**=*true|false* By default proxy environment variables are passed into the container if set -for the Podman process. This can be disabled by setting the `--http-proxy` -option to `false`. The environment variables passed in include `http_proxy`, +for the Podman process. This can be disabled by setting the `--http-proxy` +option to `false`. The environment variables passed in include `http_proxy`, `https_proxy`, `ftp_proxy`, `no_proxy`, and also the upper case versions of -those. This option is only needed when the host system must use a proxy but -the container should not use any proxy. Proxy environment variables specified +those. This option is only needed when the host system must use a proxy but +the container should not use any proxy. Proxy environment variables specified for the container in any other way will override the values that would have -been passed through from the host. (Other ways to specify the proxy for the +been passed through from the host. (Other ways to specify the proxy for the container include passing the values with the `--env` flag, or hard coding the proxy environment at container build time.) (Not available for remote commands) @@ -411,9 +453,9 @@ The address must be within the CNI network's IP address pool (default **10.88.0. #### **--ipc**=*ipc* Default is to create a private IPC namespace (POSIX SysV IPC) for the container - 'container:<name|id>': reuses another container shared memory, semaphores and message queues - 'host': use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure. - 'ns:<path>' path to an IPC namespace to join. + 'container:<name|id>': reuses another container shared memory, semaphores and message queues + 'host': use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure. + 'ns:<path>' path to an IPC namespace to join. #### **--kernel-memory**=*number[unit]* @@ -439,7 +481,7 @@ Not implemented #### **--log-driver**="*k8s-file*" -Logging driver for the container. Currently available options are *k8s-file*, *journald*, and *none*, with *json-file* aliased to *k8s-file* for scripting compatibility. +Logging driver for the container. Currently available options are *k8s-file*, *journald*, and *none*, with *json-file* aliased to *k8s-file* for scripting compatibility. #### **--log-opt**=*name*=*value* @@ -496,7 +538,7 @@ as memory limit. A limit value equal to memory plus swap. Must be used with the **-m** (**--memory**) flag. The swap `LIMIT` should always be larger than **-m** -(**--memory**) value. By default, the swap `LIMIT` will be set to double +(**--memory**) value. By default, the swap `LIMIT` will be set to double the value of --memory. The format of `LIMIT` is `<number>[<unit>]`. Unit can be `b` (bytes), @@ -547,7 +589,7 @@ Current supported mount TYPEs are **bind**, **volume**, **image**, **tmpfs** and · bind-propagation: shared, slave, private, unbindable, rshared, rslave, runbindable, or rprivate(default). See also mount(2). - . bind-nonrecursive: do not setup a recursive bind mount. By default it is recursive. + . bind-nonrecursive: do not setup a recursive bind mount. By default it is recursive. . relabel: shared, private. @@ -559,7 +601,7 @@ Current supported mount TYPEs are **bind**, **volume**, **image**, **tmpfs** and · tmpfs-mode: File mode of the tmpfs in octal. (e.g. 700 or 0700.) Defaults to 1777 in Linux. - · tmpcopyup: Enable copyup from the image directory at the same location to the tmpfs. Used by default. + · tmpcopyup: Enable copyup from the image directory at the same location to the tmpfs. Used by default. · notmpcopyup: Disable copying files from the image to the tmpfs. @@ -588,10 +630,10 @@ Valid _mode_ values are: - **none**: no networking; - **container:**_id_: reuse another container's network stack; - **host**: use the Podman host network stack. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure; -- **cni-network**: connect to a user-defined network, multiple networks should be comma-separated or they can be specified with multiple uses of the **--network** option; +- _network-id_: connect to a user-defined network, multiple networks should be comma separated; - **ns:**_path_: path to a network namespace to join; - **private**: create a new namespace for the container (default) -- **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options: +- **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options: - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false. - **cidr=CIDR**: Specify ip range to use for this network. (Default is `10.0.2.0/24`). - **enable_ipv6=true|false**: Enable IPv6. Default is false. (Required for `outbound_addr6`). @@ -632,7 +674,7 @@ Override the architecture, defaults to hosts, of the image to be pulled. For exa Override the OS, defaults to hosts, of the image to be pulled. For example, `windows`. #### **--override-variant**=*VARIANT* -Use _VARIANT_ instead of the default architecture variant of the container image. Some images can use multiple variants of the arm architectures, such as arm/v5 and arm/v7. +Use _VARIANT_ instead of the default architecture variant of the container image. Some images can use multiple variants of the arm architectures, such as arm/v5 and arm/v7. #### **--pid**=*pid* @@ -659,7 +701,7 @@ To make a pod with more granular options, use the `podman pod create` command be #### **--pod-id-file**=*path* -Run container in an existing pod and read the pod's ID from the specified file. If a container is run within a pod, and the pod has an infra-container, the infra-container will be started before the container is. +Run container in an existing pod and read the pod's ID from the specified file. If a container is run within a pod, and the pod has an infra-container, the infra-container will be started before the container is. #### **--privileged**=*true|false* @@ -693,7 +735,7 @@ If it is not, the container port will be randomly assigned a port on the host. Use `podman port` to see the actual mapping: `podman port CONTAINER $CONTAINERPORT` **Note:** if a container will be run within a pod, it is not necessary to publish the port for -the containers in the pod. The port must only be published by the pod itself. Pod network +the containers in the pod. The port must only be published by the pod itself. Pod network stacks act like the network stack on the host - you have a variety of containers in the pod, and programs in the container, all sharing a single interface and IP address, and associated ports. If one container binds to a port, no other container can use that port @@ -730,16 +772,16 @@ Suppress output information when pulling images Mount the container's root filesystem as read only. By default a container will have its root filesystem writable allowing processes -to write files anywhere. By specifying the `--read-only` flag the container will have +to write files anywhere. By specifying the `--read-only` flag the container will have its root filesystem mounted as read only prohibiting any writes. #### **--read-only-tmpfs**=*true|false* -If container is running in --read-only mode, then mount a read-write tmpfs on /run, /tmp, and /var/tmp. The default is *true* +If container is running in --read-only mode, then mount a read-write tmpfs on /run, /tmp, and /var/tmp. The default is *true* #### **--replace**=**true**|**false** -If another container with the same name already exists, replace and remove it. The default is **false**. +If another container with the same name already exists, replace and remove it. The default is **false**. #### **--restart**=*policy* @@ -777,9 +819,9 @@ of the container is assumed to be managed externally. Determines how to use the NOTIFY_SOCKET, as passed with systemd and Type=notify. Default is **container**, which means allow the OCI runtime to proxy the socket into the -container to receive ready notification. Podman will set the MAINPID to conmon's pid. +container to receive ready notification. Podman will set the MAINPID to conmon's pid. The **conmon** option sets MAINPID to conmon's pid, and sends READY when the container -has started. The socket is never passed to the runtime or the container. +has started. The socket is never passed to the runtime or the container. The **ignore** option removes NOTIFY_SOCKET from the environment for itself and child processes, for the case where some other process above Podman uses NOTIFY_SOCKET and Podman should not use it. @@ -808,7 +850,7 @@ Security Options - `seccomp=unconfined` : Turn off seccomp confinement for the container - `seccomp=profile.json` : White listed syscalls seccomp Json file to be used as a seccomp filter -- `proc-opts=OPTIONS` : Comma separated list of options to use for the /proc mount. More details for the +- `proc-opts=OPTIONS` : Comma separated list of options to use for the /proc mount. More details for the possible mount options are specified at **proc(5)** man page. Note: Labeling can be disabled for all containers by setting label=false in the **containers.conf** (`/etc/containers/containers.conf` or `$HOME/.config/containers/containers.conf`) file. @@ -830,11 +872,11 @@ Remote connections use local containers.conf for defaults #### **--subgidname**=*name* -Name for GID map from the `/etc/subgid` file. Using this flag will run the container with user namespace enabled. This flag conflicts with `--userns` and `--gidmap`. +Name for GID map from the `/etc/subgid` file. Using this flag will run the container with user namespace enabled. This flag conflicts with `--userns` and `--gidmap`. #### **--subuidname**=*name* -Name for UID map from the `/etc/subuid` file. Using this flag will run the container with user namespace enabled. This flag conflicts with `--userns` and `--uidmap`. +Name for UID map from the `/etc/subuid` file. Using this flag will run the container with user namespace enabled. This flag conflicts with `--userns` and `--uidmap`. #### **--sysctl**=*SYSCTL* @@ -857,7 +899,7 @@ Note: if you use the --network=host option these sysctls will not be allowed. Run container in systemd mode. The default is *true*. The value *always* enforces the systemd mode is enforced without -looking at the executable name. Otherwise, if set to true and the +looking at the executable name. Otherwise, if set to true and the command you are running inside the container is systemd, /usr/sbin/init, /sbin/init or /usr/local/sbin/init. @@ -871,7 +913,7 @@ It will also set the default stop signal to SIGRTMIN+3. This allow systemd to run in a confined container without any modifications. Note: On `SELinux` systems, systemd attempts to write to the cgroup -file system. Containers writing to the cgroup file system are denied by default. +file system. Containers writing to the cgroup file system are denied by default. The `container_manage_cgroup` boolean must be enabled for this to be allowed on an SELinux separated system. `setsebool -P container_manage_cgroup true` @@ -884,7 +926,7 @@ Mount a temporary filesystem (`tmpfs`) mount into a container, for example: $ podman create -d --tmpfs /tmp:rw,size=787448k,mode=1777 my_image -This command mounts a `tmpfs` at `/tmp` within the container. The supported mount +This command mounts a `tmpfs` at `/tmp` within the container. The supported mount options are the same as the Linux default `mount` flags. If you do not specify any options, the systems uses the following options: `rw,noexec,nosuid,nodev`. @@ -912,7 +954,7 @@ Remote connections use local containers.conf for defaults #### **--uidmap**=*container_uid:host_uid:amount* -UID map for the user namespace. Using this flag will run the container with user namespace enabled. It conflicts with the `--userns` and `--subuidname` flags. +UID map for the user namespace. Using this flag will run the container with user namespace enabled. It conflicts with the `--userns` and `--subuidname` flags. The following example maps uids 0-2000 in the container to the uids 30000-31999 on the host and gids 0-2000 in the container to the gids 30000-31999 on the host. `--uidmap=0:30000:2000` @@ -938,11 +980,11 @@ Without this argument the command will be run as root in the container. #### **--userns**=private #### **--userns**=*ns:my_namespace* -Set the user namespace mode for the container. It defaults to the **PODMAN_USERNS** environment variable. An empty value means user namespaces are disabled. +Set the user namespace mode for the container. It defaults to the **PODMAN_USERNS** environment variable. An empty value means user namespaces are disabled. -- `auto`: automatically create a namespace. It is possible to specify other options to `auto`. The supported options are - **size=SIZE** to specify an explicit size for the automatic user namespace. e.g. `--userns=auto:size=8192`. If `size` is not specified, `auto` will guess a size for the user namespace. +- `auto`: automatically create a namespace. It is possible to specify other options to `auto`. The supported options are + **size=SIZE** to specify an explicit size for the automatic user namespace. e.g. `--userns=auto:size=8192`. If `size` is not specified, `auto` will guess a size for the user namespace. **uidmapping=HOST_UID:CONTAINER_UID:SIZE** to force a UID mapping to be present in the user namespace. **gidmapping=HOST_UID:CONTAINER_UID:SIZE** to force a GID mapping to be present in the user namespace. - `container`: join the user namespace of the specified container. @@ -951,7 +993,7 @@ Set the user namespace mode for the container. It defaults to the **PODMAN_USER - `ns`: run the container in the given existing user namespace. - `private`: create a new namespace for the container (default) -This option is incompatible with --gidmap, --uidmap, --subuid and --subgid +This option is incompatible with **--gidmap**, **--uidmap**, **--subuidname** and **--subgidname**. #### **--uts**=*mode* @@ -964,9 +1006,9 @@ Set the UTS namespace mode for the container. The following values are supported #### **--volume**, **-v**[=*[[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]]*] -Create a bind mount. If you specify, ` -v /HOST-DIR:/CONTAINER-DIR`, podman -bind mounts `/HOST-DIR` in the host to `/CONTAINER-DIR` in the podman -container. Similarly, `-v SOURCE-VOLUME:/CONTAINER-DIR` will mount the volume +Create a bind mount. If you specify, ` -v /HOST-DIR:/CONTAINER-DIR`, Podman +bind mounts `/HOST-DIR` in the host to `/CONTAINER-DIR` in the Podman +container. Similarly, `-v SOURCE-VOLUME:/CONTAINER-DIR` will mount the volume in the host to the container. If no such named volume exists, Podman will create one. The `OPTIONS` are a comma delimited list and can be: <sup>[[1]](#Footnote1)</sup> @@ -984,18 +1026,21 @@ The _options_ is a comma delimited list and can be: The `CONTAINER-DIR` must be an absolute path such as `/src/docs`. The volume will be mounted into the container at this directory. -Volumes may specify a source as well, as either a directory on the host or the -name of a named volume. If no source is given, the volume will be created as an -anonymous named volume with a randomly generated name, and will be removed when +Volumes may specify a source as well, as either a directory on the host +or the name of a named volume. If no source is given, the volume will be created as an +anonymously named volume with a randomly generated name, and will be removed when the container is removed via the `--rm` flag or `podman rm --volumes`. If a volume source is specified, it must be a path on the host or the name of a named volume. Host paths are allowed to be absolute or relative; relative paths -are resolved relative to the directory Podman is run in. Any source that does -not begin with a `.` or `/` will be treated as the name of a named volume. -If a volume with that name does not exist, it will be created. Volumes created -with names are not anonymous. They are not removed by the `--rm` option and the -`podman rm --volumes` command. +are resolved relative to the directory Podman is run in. If the source does not +exist, Podman will return an error. Users must pre-create the source files or +directories. + +Any source that does not begin with a `.` or `/` will be treated as the name of +a named volume. If a volume with that name does not exist, it will be created. +Volumes created with names are not anonymous, and they are not removed by the `--rm` +option and the `podman rm --volumes` command. You can specify multiple **-v** options to mount one or more volumes into a container. @@ -1026,13 +1071,13 @@ Only the current container can use a private volume. The `:O` flag tells Podman to mount the directory from the host as a temporary storage using the `overlay file system`. The container processes can modify content within the mountpoint which is stored in the -container storage in a separate directory. In overlay terms, the source +container storage in a separate directory. In overlay terms, the source directory will be the lower, and the container storage directory will be the upper. Modifications to the mount point are destroyed when the container finishes executing, similar to a tmpfs mount point being unmounted. Subsequent executions of the container will see the original source directory -content, any changes from previous container executions no longer exists. +content, any changes from previous container executions no longer exist. One use case of the overlay mount is sharing the package cache from the host into the container to allow speeding up builds. @@ -1047,7 +1092,7 @@ and can read/write `container_file_t`. If you can not change the labels on a source volume, SELinux container separation must be disabled for the container to work. - The source directory mounted into the container with an overlay mount -should not be modified, it can cause unexpected failures. It is recommended +should not be modified, it can cause unexpected failures. It is recommended that you do not modify the directory until the container finishes running. `Mounts propagation` @@ -1070,7 +1115,7 @@ slave volumes, the source mount point has to be either shared or slave. <sup>[[1]](#Footnote1)</sup> If you want to recursively mount a volume and all of its submounts into a -container, then you can use the `rbind` option. By default the bind option is +container, then you can use the `rbind` option. By default the bind option is used, and submounts of the source directory will not be mounted into the container. @@ -1129,7 +1174,7 @@ default, Podman does not change the labels set by the OS. To change a label in the container context, you can add `z` to the volume mount. This suffix tells Podman to relabel file objects on the shared volumes. The `z` option tells Podman that two containers share the volume content. As a result, -podman labels the content with a shared content label. Shared volume labels allow +Podman labels the content with a shared content label. Shared volume labels allow all containers to read/write content. If the location of the volume from the source container overlaps with @@ -1184,7 +1229,7 @@ $ podman create --tz=US/Eastern alpine date ### Rootless Containers Podman runs as a non root user on most systems. This feature requires that a new enough version of shadow-utils -be installed. The shadow-utils package must include the newuidmap and newgidmap executables. +be installed. The shadow-utils package must include the newuidmap and newgidmap executables. Note: RHEL7 and Centos 7 will not have this feature until RHEL7.7 is released. @@ -1204,7 +1249,7 @@ Precedence order (later entries override earlier entries): - **--env-host** : Host environment of the process executing Podman is added. - **--http-proxy**: By default, several environment variables will be passed in from the host, such as **http_proxy** and **no_proxy**. See **--http-proxy** for details. - Container image : Any environment variables specified in the container image. -- **--env-file** : Any environment variables specified via env-files. If multiple files specified, then they override each other in order of entry. +- **--env-file** : Any environment variables specified via env-files. If multiple files specified, then they override each other in order of entry. - **--env** : Any environment variables specified will override previous settings. Create containers and set the environment ending with a __*__ and a ***** @@ -1228,7 +1273,8 @@ b NOTE: Use the environment variable `TMPDIR` to change the temporary storage location of downloaded container images. Podman defaults to use `/var/tmp`. ## SEE ALSO -**subgid**(5), **subuid**(5), **containers.conf**(5), **systemd.unit**(5), **setsebool**(8), **slirp4netns**(1), **fuse-overlayfs**(1), **proc**(5)**. +**podman**(1), **podman-save**(1), **podman-ps**(1), **podman-attach**(1), **podman-pod-create**(1), **podman-port**(1), **podman-kill**(1), **podman-stop**(1), +**podman-generate-systemd**(1) **podman-rm**(1), **subgid**(5), **subuid**(5), **containers.conf**(5), **systemd.unit**(5), **setsebool**(8), **slirp4netns**(1), **fuse-overlayfs**(1), **proc**(5)**. ## HISTORY October 2017, converted from Docker documentation to Podman by Dan Walsh for Podman <dwalsh@redhat.com> |