diff options
Diffstat (limited to 'docs/source/markdown/podman-network-create.1.md')
| -rw-r--r-- | docs/source/markdown/podman-network-create.1.md | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/docs/source/markdown/podman-network-create.1.md b/docs/source/markdown/podman-network-create.1.md index 5a3224501..479c36318 100644 --- a/docs/source/markdown/podman-network-create.1.md +++ b/docs/source/markdown/podman-network-create.1.md @@ -32,21 +32,6 @@ Special considerations for the *netavark* backend: - The `macvlan` driver requires the `--subnet` option, DHCP is currently not supported. - The `ipvlan` driver is not currently supported. -#### **--opt**=*option*, **-o** - -Set driver specific options. - -All drivers accept the `mtu` option. The `mtu` option sets the Maximum Transmission Unit (MTU) and takes an integer value. - -Additionally the `bridge` driver supports the following option: -- `vlan`: This option assign VLAN tag and enables vlan\_filtering. Defaults to none. - -The `macvlan` and `ipvlan` driver support the following options: -- `parent`: The host device which should be used for the macvlan interface. Defaults to the default route interface. -- `mode`: This option sets the specified ip/macvlan mode on the interface. - - Supported values for `macvlan` are `bridge`, `private`, `vepa`, `passthru`. Defaults to `bridge`. - - Supported values for `ipvlan` are `l2`, `l3`, `l3s`. Defaults to `l2`. - #### **--gateway** Define a gateway for the subnet. If you want to provide a gateway address, you must also provide a @@ -64,20 +49,35 @@ Allocate container IP from a range. The range must be a complete subnet and in must be used with a *subnet* option. Can be specified multiple times. The argument order of the **--subnet**, **--gateway** and **--ip-range** options must match. +#### **--ipv6** + +Enable IPv6 (Dual Stack) networking. If not subnets are given it will allocate a ipv4 and ipv6 subnet. + #### **--label** Set metadata for a network (e.g., --label mykey=value). +#### **--opt**=*option*, **-o** + +Set driver specific options. + +All drivers accept the `mtu` option. The `mtu` option sets the Maximum Transmission Unit (MTU) and takes an integer value. + +Additionally the `bridge` driver supports the following option: +- `vlan`: This option assign VLAN tag and enables vlan\_filtering. Defaults to none. + +The `macvlan` and `ipvlan` driver support the following options: +- `parent`: The host device which should be used for the macvlan interface. Defaults to the default route interface. +- `mode`: This option sets the specified ip/macvlan mode on the interface. + - Supported values for `macvlan` are `bridge`, `private`, `vepa`, `passthru`. Defaults to `bridge`. + - Supported values for `ipvlan` are `l2`, `l3`, `l3s`. Defaults to `l2`. + #### **--subnet** The subnet in CIDR notation. Can be specified multiple times to allocate more than one subnet for this network. The argument order of the **--subnet**, **--gateway** and **--ip-range** options must match. This is useful to set a static ipv4 and ipv6 subnet. -#### **--ipv6** - -Enable IPv6 (Dual Stack) networking. If not subnets are given it will allocate a ipv4 and ipv6 subnet. - ## EXAMPLE Create a network with no options. |