11 files changed, 180 insertions, 26 deletions
diff --git a/docs/source/markdown/podman-create.1.md b/docs/source/markdown/podman-create.1.md
index f0494ca7d..475634fde 100644
--- a/docs/source/markdown/podman-create.1.md
+++ b/docs/source/markdown/podman-create.1.md
@@ -278,7 +278,7 @@ See [**Environment**](#environment) note below for precedence and examples.
 
 **--env-host**=*true|false*
 
-Use host environment inside of the container. See **Environment** note below for precedence.
+Use host environment inside of the container. See **Environment** note below for precedence. (Not available for remote commands)
 
 **--env-file**=*file*
 
@@ -347,7 +347,7 @@ the container should not use any proxy.  Proxy environment variables specified
 for the container in any other way will override the values that would have
 been passed through from the host.  (Other ways to specify the proxy for the
 container include passing the values with the `--env` flag, or hard coding the
-proxy environment at container build time.)
+proxy environment at container build time.)  (Not available for remote commands)
 
 For example, to disable passing these environment variables from host to
 container:
@@ -358,12 +358,12 @@ Defaults to `true`
 
 **--image-volume**, **builtin-volume**=*bind|tmpfs|ignore*
 
-Tells Podman how to handle the builtin image volumes. The options are: 'bind', 'tmpfs', or 'ignore' (default 'bind').
-bind: A directory is created inside the container state directory and bind mounted into
-the container for the volumes.
-tmpfs: The volume is mounted onto the container as a tmpfs, which allows the users to create
+Tells Podman how to handle the builtin image volumes. Default is **bind**.
+
+- **bind**: An anonymous named volume will be created and mounted into the container.
+- **tmpfs**: The volume is mounted onto the container as a tmpfs, which allows the users to create
 content that disappears when the container is stopped.
-ignore: All volumes are just ignored and no action is taken.
+- **ignore**: All volumes are just ignored and no action is taken.
 
 **--init**
 
@@ -445,8 +445,6 @@ Remember that the MAC address in an Ethernet network must be unique.
 The IPv6 link-local address will be based on the device's MAC address
 according to RFC4862.
 
-Not currently supported
-
 **--memory**, **-m**=*limit*
 
 Memory limit (format: <number>[<unit>], where unit = b (bytes), k (kilobytes), m (megabytes), or g (gigabytes))
diff --git a/docs/source/markdown/podman-manifest-add.1.md b/docs/source/markdown/podman-manifest-add.1.md
index 857a98e12..82f2071b9 100644
--- a/docs/source/markdown/podman-manifest-add.1.md
+++ b/docs/source/markdown/podman-manifest-add.1.md
@@ -73,4 +73,4 @@ podman manifest add --arch arm64 --variant v8 mylist:v1.11 docker://71c201d10fff
 ```
 
 ## SEE ALSO
-podman(1), podman-manifest(1), podman-manifest-create(1), podman-manifest-inspect(1), podman-rmi(1)
+podman(1), podman-manifest(1), podman-manifest-create(1), podman-manifest-inspect(1), podman-manifest-push(1), podman-manifest-remove(1), podman-rmi(1)
diff --git a/docs/source/markdown/podman-manifest-annotate.1.md b/docs/source/markdown/podman-manifest-annotate.1.md
new file mode 100644
index 000000000..4450de7fd
--- /dev/null
+++ b/docs/source/markdown/podman-manifest-annotate.1.md
@@ -0,0 +1,61 @@
+% podman-manifest-annotate(1)
+
+## NAME
+podman\-manifest\-annotate - Add or update information about an entry in a manifest list or image index
+
+## SYNOPSIS
+**podman manifest annotate** [options...] *listnameorindexname* *imagemanifestdigest*
+
+## DESCRIPTION
+
+Adds or updates information about an image included in a manifest list or image index.
+
+## OPTIONS
+
+**--annotation** *annotation=value*
+
+Set an annotation on the entry for the specified image.
+
+**--arch**
+
+Override the architecture which the list or index records as a requirement for
+the image.  This is usually automatically retrieved from the image's
+configuration information, so it is rarely necessary to use this option.
+
+
+**--features**
+
+Specify the features list which the list or index records as requirements for
+the image.  This option is rarely used.
+
+**--os**
+
+Override the OS which the list or index records as a requirement for the image.
+This is usually automatically retrieved from the image's configuration
+information, so it is rarely necessary to use this option.
+
+**--os-features**
+
+Specify the OS features list which the list or index records as requirements
+for the image.  This option is rarely used.
+
+**--os-version**
+
+Specify the OS version which the list or index records as a requirement for the
+image.  This option is rarely used.
+
+**--variant**
+
+Specify the variant which the list or index records for the image.  This option
+is typically used to distinguish between multiple entries which share the same
+architecture value, but which expect different versions of its instruction set.
+
+## EXAMPLE
+
+```
+podman manifest annotate --arch arm64 --variant v8 mylist:v1.11 sha256:59eec8837a4d942cc19a52b8c09ea75121acc38114a2c68b98983ce9356b8610
+07ec8dc22b5dba3a33c60b68bce28bbd2b905e383fdb32a90708fa5eeac13a07: sha256:59eec8837a4d942cc19a52b8c09ea75121acc38114a2c68b98983ce9356b8610
+```
+
+## SEE ALSO
+podman(1), podman-manifest(1), podman-manifest-add(1), podman-manifest-create(1), podman-manifest-inspect(1), podman-rmi(1)
diff --git a/docs/source/markdown/podman-manifest-create.1.md b/docs/source/markdown/podman-manifest-create.1.md
index 941e70c32..537a641f2 100644
--- a/docs/source/markdown/podman-manifest-create.1.md
+++ b/docs/source/markdown/podman-manifest-create.1.md
@@ -40,4 +40,4 @@ podman manifest create --all mylist:v1.11 docker://fedora
 ```
 
 ## SEE ALSO
-podman(1), podman-manifest(1), podman-manifest-add(1), podman-manifest-inspect(1), podman-rmi(1)
+podman(1), podman-manifest(1), podman-manifest-add(1), podman-manifest-inspect(1), podman-manifest-push(1), podman-manifest-remove(1), podman-rmi(1)
diff --git a/docs/source/markdown/podman-manifest-inspect.1.md b/docs/source/markdown/podman-manifest-inspect.1.md
index efde02643..a4c58bd13 100644
--- a/docs/source/markdown/podman-manifest-inspect.1.md
+++ b/docs/source/markdown/podman-manifest-inspect.1.md
@@ -21,4 +21,4 @@ podman manifest inspect mylist:v1.11
 ```
 
 ## SEE ALSO
-podman(1), podman-manifest(1), podman-manifest-create(1), podman-manifest-add(1), podman-rmi(1)
+podman(1), podman-manifest(1), podman-manifest-create(1), podman-manifest-add(1), podman-manifest-push(1), podman-manifest-remove(1), podman-rmi(1)
diff --git a/docs/source/markdown/podman-manifest-push.1.md b/docs/source/markdown/podman-manifest-push.1.md
new file mode 100644
index 000000000..38d0c5904
--- /dev/null
+++ b/docs/source/markdown/podman-manifest-push.1.md
@@ -0,0 +1,72 @@
+% podman-manifest-push(1)
+
+## NAME
+podman\-manifest\-push - Push a manifest list or image index to a registry
+
+## SYNOPSIS
+**podman manifest push** [options...] *listnameorindexname* *transport:details*
+
+## DESCRIPTION
+Pushes a manifest list or image index to a registry.
+
+## RETURN VALUE
+The list image's ID and the digest of the image's manifest.
+
+## OPTIONS
+
+**--all**
+
+Push the images mentioned in the manifest list or image index, in addition to
+the list or index itself.
+
+**--authfile** *path*
+
+Path of the authentication file. Default is ${XDG\_RUNTIME\_DIR}/containers/auth.json, which is set using `podman login`.
+If the authorization state is not found there, $HOME/.docker/config.json is checked, which is set using `docker login`. (Not available for remote commands)
+
+Note: You can also override the default path of the authentication file by setting the REGISTRY\_AUTH\_FILE
+environment variable. `export REGISTRY_AUTH_FILE=path`
+
+**--cert-dir** *path*
+
+Use certificates at *path* (\*.crt, \*.cert, \*.key) to connect to the registry.
+Default certificates directory is _/etc/containers/certs.d_. (Not available for remote commands)
+
+**--creds** *creds*
+
+The [username[:password]] to use to authenticate with the registry if required.
+If one or both values are not supplied, a command line prompt will appear and the
+value can be entered.  The password is entered without echo.
+
+**--digestfile** *Digestfile*
+
+After copying the image, write the digest of the resulting image to the file.
+
+**--format, -f**
+
+Manifest list type (oci or v2s2) to use when pushing the list (default is oci).
+
+**--purge**
+
+Delete the manifest list or image index from local storage if pushing succeeds.
+
+**--remove-signatures**
+
+Don't copy signatures when pushing images.
+
+**--sign-by** *fingerprint*
+
+Sign the pushed images using the GPG key that matches the specified fingerprint.
+
+**--tls-verify** *bool-value*
+
+Require HTTPS and verify certificates when talking to container registries (defaults to true) (Not available for remote commands)
+
+## EXAMPLE
+
+```
+podman manifest push mylist:v1.11 docker://registry.example.org/mylist:v1.11
+```
+
+## SEE ALSO
+podman(1), podman-manifest(1), podman-manifest-add(1), podman-manifest-create(1), podman-manifest-inspect(1), podman-manifest-remove(1), podman-rmi(1)
diff --git a/docs/source/markdown/podman-manifest-remove.1.md b/docs/source/markdown/podman-manifest-remove.1.md
new file mode 100644
index 000000000..c13714195
--- /dev/null
+++ b/docs/source/markdown/podman-manifest-remove.1.md
@@ -0,0 +1,23 @@
+% podman-manifest-remove(1)
+
+## NAME
+podman\-manifest\-remove - Remove an image from a manifest list or image index
+
+## SYNOPSIS
+**podman manifest remove** *listnameorindexname* *transport:details*
+
+## DESCRIPTION
+Removes the image with the specified digest from the specified manifest list or image index.
+
+## RETURN VALUE
+The list image's ID and the digest of the removed image's manifest.
+
+## EXAMPLE
+
+```
+podman manifest remove mylist:v1.11 sha256:cb8a924afdf0229ef7515d9e5b3024e23b3eb03ddbba287f4a19c6ac90b8d221
+e604eabaaee4858232761b4fef84e2316ed8f93e15eceafce845966ee3400036 :sha256:cb8a924afdf0229ef7515d9e5b3024e23b3eb03ddbba287f4a19c6ac90b8d221
+```
+
+## SEE ALSO
+podman(1), podman-manifest(1), podman-manifest-add(1), podman-manifest-create(1), podman-manifest-inspect(1), podman-manifest-push(1), podman-rmi(1)
diff --git a/docs/source/markdown/podman-manifest.1.md b/docs/source/markdown/podman-manifest.1.md
index 70d695883..3353979ac 100644
--- a/docs/source/markdown/podman-manifest.1.md
+++ b/docs/source/markdown/podman-manifest.1.md
@@ -13,11 +13,14 @@ The `podman manifest` command provides subcommands which can be used to:
 
 ## SUBCOMMANDS
 
-| Command  | Man Page                                                   | Description                                                                 |
-| -------  | ---------------------------------------------------------- | --------------------------------------------------------------------------- |
-| add      | [podman-manifest-add(1)](podman-manifest-add.1.md)         | Add an image to a manifest list or image index.                             |
-| create   | [podman-manifest-create(1)](podman-manifest-create.1.md)   | Create a manifest list or image index.                                      |
-| inspect  | [podman-manifest-inspect(1)](podman-manifest-inspect.1.md) | Display a manifest list or image index.                                     |
+| Command  | Man Page                                                     | Description                                                                 |
+| -------- | ------------------------------------------------------------ | --------------------------------------------------------------------------- |
+| add      | [podman-manifest-add(1)](podman-manifest-add.1.md)           | Add an image to a manifest list or image index.                             |
+| annotate | [podman-manifest-annotate(1)](podman-manifest-annotate.1.md) | Add or update information about an entry in a manifest list or image index. |
+| create   | [podman-manifest-create(1)](podman-manifest-create.1.md)     | Create a manifest list or image index.                                      |
+| inspect  | [podman-manifest-inspect(1)](podman-manifest-inspect.1.md)   | Display a manifest list or image index.                                     |
+| push     | [podman-manifest-push(1)](podman-manifest-push.1.md)         | Push a manifest list or image index to a registry.                          |
+| remove   | [podman-manifest-remove(1)](podman-manifest-remove.1.md)     | Remove an image from a manifest list or image index.                        |
 
 ## SEE ALSO
-podman(1), podman-manifest-add(1), podman-manifest-create(1), podman-manifest-inspect(1)
+podman(1), podman-manifest-add(1), podman-manifest-annotate(1), podman-manifest-create(1), podman-manifest-inspect(1), podman-manifest-push(1), podman-manifest-remove(1)
diff --git a/docs/source/markdown/podman-network-create.1.md b/docs/source/markdown/podman-network-create.1.md
index cbdfee4d0..45d9d9b0b 100644
--- a/docs/source/markdown/podman-network-create.1.md
+++ b/docs/source/markdown/podman-network-create.1.md
@@ -24,7 +24,7 @@ resolution.
 
 **-d**, **--driver**
 
-Driver to manage the network (default "bridge").  Currently on `bridge` is supported.
+Driver to manage the network (default "bridge").  Currently only `bridge` is supported.
 
 **--gateway**
 
diff --git a/docs/source/markdown/podman-run.1.md b/docs/source/markdown/podman-run.1.md
index b21eb9da9..4c236b520 100644
--- a/docs/source/markdown/podman-run.1.md
+++ b/docs/source/markdown/podman-run.1.md
@@ -294,7 +294,7 @@ See [**Environment**](#environment) note below for precedence and examples.
 
 **--env-host**=**true**|**false**
 
-Use host environment inside of the container. See **Environment** note below for precedence.
+Use host environment inside of the container. See **Environment** note below for precedence. (Not available for remote commands)
 
 **--env-file**=*file*
 
@@ -363,7 +363,7 @@ the container should not use any proxy.  Proxy environment variables specified
 for the container in any other way will override the values that would have
 been passed through from the host.  (Other ways to specify the proxy for the
 container include passing the values with the **--env** flag, or hard coding the
-proxy environment at container build time.)
+proxy environment at container build time.) (Not available for remote commands)
 
 Defaults to **true**.
 
@@ -371,8 +371,7 @@ Defaults to **true**.
 
 Tells Podman how to handle the builtin image volumes. Default is **bind**.
 
-- **bind**: A directory is created inside the container state directory and bind mounted into
-the container for the volumes.
+- **bind**: An anonymous named volume will be created and mounted into the container.
 - **tmpfs**: The volume is mounted onto the container as a tmpfs, which allows the users to create
 content that disappears when the container is stopped.
 - **ignore**: All volumes are just ignored and no action is taken.
@@ -454,8 +453,6 @@ Remember that the MAC address in an Ethernet network must be unique.
 The IPv6 link-local address will be based on the device's MAC address
 according to RFC4862.
 
-Not currently supported
-
 **--memory**, **-m**=_number_[_unit_]
 
 Memory limit. A _unit_ can be **b** (bytes), **k** (kilobytes), **m** (megabytes), or **g** (gigabytes).
diff --git a/docs/source/markdown/podman-search.1.md b/docs/source/markdown/podman-search.1.md
index 31de6f839..75bfeb058 100644
--- a/docs/source/markdown/podman-search.1.md
+++ b/docs/source/markdown/podman-search.1.md
@@ -59,7 +59,7 @@ Valid placeholders for the Go template are listed below:
 
 **--limit**=*limit*
 
-Limit the number of results
+Limit the number of results. This value can be in the range between 1 and 100. The default number of results is 25.
 Note: The results from each registry will be limited to this value.
 Example if limit is 10 and two registries are being searched, the total
 number of results will be 20, 10 from each (if there are at least 10 matches in each).