11 files changed, 32 insertions, 32 deletions
diff --git a/docs/source/markdown/podman-build.1.md b/docs/source/markdown/podman-build.1.md
index 406dfcd89..bd1e673b8 100644
--- a/docs/source/markdown/podman-build.1.md
+++ b/docs/source/markdown/podman-build.1.md
@@ -429,7 +429,7 @@ container full access to local system services such as D-bus and is therefore
 considered insecure.
 - **ns:**_path_: path to a network namespace to join.
 - **private**: create a new namespace for the container (default)
-- **\<network name|ID\>**: Join the network with the given name or ID, e.g. use `--network mynet` to join the network with the name mynet. Only supported for rootfull users.
+- **\<network name|ID\>**: Join the network with the given name or ID, e.g. use `--network mynet` to join the network with the name mynet. Only supported for rootful users.
 
 #### **--no-cache**
 
@@ -685,7 +685,7 @@ suitable group name to use as the default setting for this option.
 
 **NOTE:** When this option is specified by a rootless user, the specified
 mappings are relative to the rootless user namespace in the container, rather
-than being relative to the host as it would be when run rootfull.
+than being relative to the host as it would be when run rootful.
 
 #### **--userns-uid-map**=*mapping*
 
@@ -721,7 +721,7 @@ suitable user name to use as the default setting for this option.
 
 **NOTE:** When this option is specified by a rootless user, the specified
 mappings are relative to the rootless user namespace in the container, rather
-than being relative to the host as it would be when run rootfull.
+than being relative to the host as it would be when run rootful.
 
 #### **--uts**=*how*
 
diff --git a/docs/source/markdown/podman-create.1.md b/docs/source/markdown/podman-create.1.md
index 15ae28dc3..c63e8814b 100644
--- a/docs/source/markdown/podman-create.1.md
+++ b/docs/source/markdown/podman-create.1.md
@@ -704,7 +704,7 @@ Set the network mode for the container. Invalid if using **--dns**, **--dns-opt*
 
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -717,7 +717,7 @@ Valid _mode_ values are:
 - **container:**_id_: Reuse another container's network stack.
 - **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).
@@ -1118,8 +1118,8 @@ option conflicts with the **--userns** and **--subuidname** options. This
 option provides a way to map host UIDs to container UIDs. It can be passed
 several times to map different ranges.
 
-The _from_uid_ value is based upon the user running the command, either rootfull or rootless users.
-* rootfull user:  *container_uid*:*host_uid*:*amount*
+The _from_uid_ value is based upon the user running the command, either rootful or rootless users.
+* rootful user:  *container_uid*:*host_uid*:*amount*
 * rootless user: *container_uid*:*intermediate_uid*:*amount*
 
 When **podman create** is called by a privileged user, the option **--uidmap**
diff --git a/docs/source/markdown/podman-image-scp.1.md b/docs/source/markdown/podman-image-scp.1.md
index 6d5a51298..1d902da91 100644
--- a/docs/source/markdown/podman-image-scp.1.md
+++ b/docs/source/markdown/podman-image-scp.1.md
@@ -8,7 +8,7 @@ podman-image-scp - Securely copy an image from one host to another
 
 ## DESCRIPTION
 **podman image scp** copies container images between hosts on a network. You can load to the remote host or from the remote host as well as in between two remote hosts.
-Note: `::` is used to specify the image name depending on if you are saving or loading. Images can also be transferred from rootfull to rootless storage on the same machine without using sshd. This feature is not supported on the remote client, including Mac and Windows (excluding WSL2) machines.
+Note: `::` is used to specify the image name depending on if you are saving or loading. Images can also be transferred from rootful to rootless storage on the same machine without using sshd. This feature is not supported on the remote client, including Mac and Windows (excluding WSL2) machines.
 
 **podman image scp [GLOBAL OPTIONS]**
 
diff --git a/docs/source/markdown/podman-machine-init.1.md b/docs/source/markdown/podman-machine-init.1.md
index e42c5025b..33947bbba 100644
--- a/docs/source/markdown/podman-machine-init.1.md
+++ b/docs/source/markdown/podman-machine-init.1.md
@@ -59,9 +59,9 @@ Memory (in MB).
 
 Start the virtual machine immediately after it has been initialized.
 
-#### **--rootfull**=*true|false*
+#### **--rootful**=*true|false*
 
-Whether this machine should prefer rootfull (`true`) or rootless (`false`)
+Whether this machine should prefer rootful (`true`) or rootless (`false`)
 container execution. This option will also determine the remote connection default
 if there is no existing remote connection configurations.
 
@@ -95,7 +95,7 @@ Driver to use for mounting volumes from the host, such as `virtfs`.
 ```
 $ podman machine init
 $ podman machine init myvm
-$ podman machine init --rootfull
+$ podman machine init --rootful
 $ podman machine init --disk-size 50
 $ podman machine init --memory=1024 myvm
 $ podman machine init -v /Users:/mnt/Users
diff --git a/docs/source/markdown/podman-machine-set.1.md b/docs/source/markdown/podman-machine-set.1.md
index e69a7dc14..a4918eacf 100644
--- a/docs/source/markdown/podman-machine-set.1.md
+++ b/docs/source/markdown/podman-machine-set.1.md
@@ -19,39 +19,39 @@ subset can be changed after machine initialization.
 
 Print usage statement.
 
-#### **--rootfull**=*true|false*
+#### **--rootful**=*true|false*
 
-Whether this machine should prefer rootfull (`true`) or rootless (`false`)
+Whether this machine should prefer rootful (`true`) or rootless (`false`)
 container execution. This option will also update the current podman
 remote connection default if it is currently pointing at the specified
 machine name (or `podman-machine-default` if no name is specified).
 
 Unlike [**podman system connection default**](podman-system-connection-default.1.md)
-this option will also make the API socket, if available, forward to the rootfull/rootless
+this option will also make the API socket, if available, forward to the rootful/rootless
 socket in the VM.
 
 ## EXAMPLES
 
-To switch the default VM `podman-machine-default` from rootless to rootfull:
+To switch the default VM `podman-machine-default` from rootless to rootful:
 
 ```
-$ podman machine set --rootfull
+$ podman machine set --rootful
 ```
 
 or more explicitly:
 
 ```
-$ podman machine set --rootfull=true
+$ podman machine set --rootful=true
 ```
 
-To switch the default VM `podman-machine-default` from rootfull to rootless:
+To switch the default VM `podman-machine-default` from rootful to rootless:
 ```
-$ podman machine set --rootfull=false
+$ podman machine set --rootful=false
 ```
 
-To switch the VM `myvm` from rootless to rootfull:
+To switch the VM `myvm` from rootless to rootful:
 ```
-$ podman machine set --rootfull myvm
+$ podman machine set --rootful myvm
 ```
 
 ## SEE ALSO
diff --git a/docs/source/markdown/podman-network-reload.1.md b/docs/source/markdown/podman-network-reload.1.md
index 5cbe9b9bf..31d10829e 100644
--- a/docs/source/markdown/podman-network-reload.1.md
+++ b/docs/source/markdown/podman-network-reload.1.md
@@ -9,7 +9,7 @@ podman\-network\-reload - Reload network configuration for containers
 ## DESCRIPTION
 Reload one or more container network configurations.
 
-Rootfull Podman relies on iptables rules in order to provide network connectivity. If the iptables rules are deleted,
+Rootful Podman relies on iptables rules in order to provide network connectivity. If the iptables rules are deleted,
 this happens for example with `firewall-cmd --reload`, the container loses network connectivity. This command restores
 the network connectivity.
 
diff --git a/docs/source/markdown/podman-play-kube.1.md b/docs/source/markdown/podman-play-kube.1.md
index 8b56d109a..8ed71b734 100644
--- a/docs/source/markdown/podman-play-kube.1.md
+++ b/docs/source/markdown/podman-play-kube.1.md
@@ -188,7 +188,7 @@ Note: When joining multiple networks you should use the **--network name:mac=\<m
 Change the network mode of the pod. The host network mode should be configured in the YAML file.
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -200,7 +200,7 @@ Valid _mode_ values are:
 - **none**: Create a network namespace for the container but do not configure network interfaces for it, thus the container has no network connectivity.
 - **container:**_id_: Reuse another container's network stack.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).
diff --git a/docs/source/markdown/podman-pod-create.1.md b/docs/source/markdown/podman-pod-create.1.md
index 403a317ea..714909b98 100644
--- a/docs/source/markdown/podman-pod-create.1.md
+++ b/docs/source/markdown/podman-pod-create.1.md
@@ -156,7 +156,7 @@ Set the network mode for the pod. Invalid if using **--dns**, **--dns-opt**, or
 
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -169,7 +169,7 @@ Valid _mode_ values are:
 - **container:**_id_: Reuse another container's network stack.
 - **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).
diff --git a/docs/source/markdown/podman-pull.1.md b/docs/source/markdown/podman-pull.1.md
index 00a86aa71..928bbc6fe 100644
--- a/docs/source/markdown/podman-pull.1.md
+++ b/docs/source/markdown/podman-pull.1.md
@@ -117,7 +117,7 @@ Using short names is subject to the risk of hitting squatted registry namespaces
 While it is highly recommended to always use fully-qualified image references, existing deployments using short names may not be easily changed. To circumvent the aforementioned ambiguity, so called short-name aliases can be configured that point to a fully-qualified image reference. Distributions often ship a default shortnames.conf expansion file in /etc/containers/registries.conf.d/ directory. Administrators can use this directory to add their own local short-name expansion files.
 
 When pulling an image, if the user does not specify the complete registry, container engines attempt to expand the short-name into a full name. If the command is executed with a tty, the user will be prompted to select a registry from the
-default list unqualified registries defined in registries.conf. The user's selection is then stored in a cache file to be used in all future short-name expansions. Rootfull short-names are stored in /var/cache/containers/short-name-aliases.conf. Rootless short-names are stored in the $HOME/.cache/containers/short-name-aliases.conf file.
+default list unqualified registries defined in registries.conf. The user's selection is then stored in a cache file to be used in all future short-name expansions. Rootful short-names are stored in /var/cache/containers/short-name-aliases.conf. Rootless short-names are stored in the $HOME/.cache/containers/short-name-aliases.conf file.
 
 For more information on short-names, see `containers-registries.conf(5)`
 
diff --git a/docs/source/markdown/podman-run.1.md b/docs/source/markdown/podman-run.1.md
index 578acf379..9d9394020 100644
--- a/docs/source/markdown/podman-run.1.md
+++ b/docs/source/markdown/podman-run.1.md
@@ -730,7 +730,7 @@ Set the network mode for the container. Invalid if using **--dns**, **--dns-opt*
 
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -743,7 +743,7 @@ Valid _mode_ values are:
 - **container:**_id_: Reuse another container's network stack.
 - **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).
@@ -1185,8 +1185,8 @@ option conflicts with the **--userns** and **--subuidname** options. This
 option provides a way to map host UIDs to container UIDs. It can be passed
 several times to map different ranges.
 
-The _from_uid_ value is based upon the user running the command, either rootfull or rootless users.
-* rootfull user:  *container_uid*:*host_uid*:*amount*
+The _from_uid_ value is based upon the user running the command, either rootful or rootless users.
+* rootful user:  *container_uid*:*host_uid*:*amount*
 * rootless user: *container_uid*:*intermediate_uid*:*amount*
 
 When **podman run** is called by a privileged user, the option **--uidmap**
diff --git a/docs/source/markdown/podman-system-service.1.md b/docs/source/markdown/podman-system-service.1.md
index 678f08a20..176d73eda 100644
--- a/docs/source/markdown/podman-system-service.1.md
+++ b/docs/source/markdown/podman-system-service.1.md
@@ -9,7 +9,7 @@ podman\-system\-service - Run an API service
 ## DESCRIPTION
 The **podman system service** command creates a listening service that will answer API calls for Podman.  You may
 optionally provide an endpoint for the API in URI form.  For example, *unix:///tmp/foobar.sock* or *tcp:localhost:8080*.
-If no endpoint is provided, defaults will be used.  The default endpoint for a rootfull
+If no endpoint is provided, defaults will be used.  The default endpoint for a rootful
 service is *unix:///run/podman/podman.sock* and rootless is *unix://$XDG_RUNTIME_DIR/podman/podman.sock* (for
 example *unix:///run/user/1000/podman/podman.sock*)