diff options
Diffstat (limited to 'docs/source')
| -rw-r--r-- | docs/source/markdown/libpod.conf.5.md | 114 | ||||
| -rw-r--r-- | docs/source/markdown/podman-attach.1.md | 4 | ||||
| -rw-r--r-- | docs/source/markdown/podman-create.1.md | 8 | ||||
| -rw-r--r-- | docs/source/markdown/podman-events.1.md | 4 | ||||
| -rw-r--r-- | docs/source/markdown/podman-run.1.md | 10 | ||||
| -rw-r--r-- | docs/source/markdown/podman-system-migrate.1.md | 2 | ||||
| -rw-r--r-- | docs/source/markdown/podman-system-renumber.1.md | 6 | ||||
| -rw-r--r-- | docs/source/markdown/podman.1.md | 16 |
8 files changed, 26 insertions, 138 deletions
diff --git a/docs/source/markdown/libpod.conf.5.md b/docs/source/markdown/libpod.conf.5.md deleted file mode 100644 index ca45bccf6..000000000 --- a/docs/source/markdown/libpod.conf.5.md +++ /dev/null @@ -1,114 +0,0 @@ -% libpod.conf(5) - -## NAME -libpod.conf - libpod configuration file - -## DESCRIPTION -The libpod.conf file is the default configuration file for all tools using -libpod to manage containers. - -## OPTIONS - -**image_default_transport**="" - Default transport method for pulling and pushing images - -**runtime**="" - Default OCI runtime to use if nothing is specified in **runtimes** - -**runtimes** - For each OCI runtime, specify a list of paths to look for. The first one found is used. If the paths are empty or no valid path was found, then the `$PATH` environment variable will be used as the fallback. - -**conmon_path**="" - Paths to search for the conmon container manager binary. If the paths are empty or no valid path was found, then the `$PATH` environment variable will be used as the fallback. - -**conmon_env_vars**="" - Environment variables to pass into Conmon - -**cgroup_manager**="" - Specify the CGroup Manager to use; valid values are "systemd" and "cgroupfs" - -**lock_type**="" - Specify the locking mechanism to use; valid values are "shm" and "file". Change the default only if you are sure of what you are doing, in general "file" is useful only on platforms where cgo is not available for using the faster "shm" lock type. You may need to run "podman system renumber" after you change the lock type. - -**init_path**="" - Path to the container-init binary, which forwards signals and reaps processes within containers. Note that the container-init binary will only be used when the `--init` for podman-create and podman-run is set. - -**hooks_dir**=["*path*", ...] - - Each `*.json` file in the path configures a hook for Podman containers. For more details on the syntax of the JSON files and the semantics of hook injection, see `oci-hooks(5)`. Podman and libpod currently support both the 1.0.0 and 0.1.0 hook schemas, although the 0.1.0 schema is deprecated. - - Paths listed later in the array have higher precedence (`oci-hooks(5)` discusses directory precedence). - - For the annotation conditions, libpod uses any annotations set in the generated OCI configuration. - - For the bind-mount conditions, only mounts explicitly requested by the caller via `--volume` are considered. Bind mounts that libpod inserts by default (e.g. `/dev/shm`) are not considered. - - Podman and libpod currently support an additional `precreate` state which is called before the runtime's `create` operation. Unlike the other stages, which receive the container state on their standard input, `precreate` hooks receive the proposed runtime configuration on their standard input. They may alter that configuration as they see fit, and write the altered form to their standard output. - - **WARNING**: the `precreate` hook lets you do powerful things, such as adding additional mounts to the runtime configuration. That power also makes it easy to break things. Before reporting libpod errors, try running your container with `precreate` hooks disabled to see if the problem is due to one of your hooks. - -**static_dir**="" - Directory for persistent libpod files (database, etc) - By default this will be configured relative to where containers/storage - stores containers - -**tmp_dir**="" - Directory for temporary files - Must be a tmpfs (wiped after reboot) - -**max_log_size**="" - Maximum size of log files (in bytes) - -**no_pivot_root**="" - Whether to use chroot instead of pivot_root in the runtime - -**cni_config_dir**="" - Directory containing CNI plugin configuration files - -**cni_plugin_dir**="" - Directories where CNI plugin binaries may be located - -**infra_image** = "" - Infra (pause) container image name for pod infra containers. When running a pod, we - start a `pause` process in a container to hold open the namespaces associated with the - pod. This container and process, basically sleep/pause for the lifetime of the pod. - -**infra_command**="" - Command to run the infra container - -**namespace**="" - Default libpod namespace. If libpod is joined to a namespace, it will see only containers and pods - that were created in the same namespace, and will create new containers and pods in that namespace. - The default namespace is "", which corresponds to no namespace. When no namespace is set, all - containers and pods are visible. - -**label**="true|false" - Indicates whether the containers should use label separation by default. - Can be overridden via `--security-opt label=...` on the CLI. - -**num_locks**="" - Number of locks available for containers and pods. Each created container or pod consumes one lock. - The default number available is 2048. - If this is changed, a lock renumbering must be performed, using the `podman system renumber` command. - -**volume_path**="" - Directory where named volumes will be created in using the default volume driver. - By default this will be configured relative to where containers/storage stores containers. - -**network_cmd_path**="" - Path to the command binary to use for setting up a network. It is currently only used for setting up - a slirp4netns network. If "" is used then the binary is looked up using the $PATH environment variable. - -**events_logger**="" - Default method to use when logging events. Valid values are "file", "journald", and "none". - -**detach_keys**="" - Keys sequence used for detaching a container - -## FILES - `/usr/share/containers/libpod.conf`, default libpod configuration path - - `/etc/containers/libpod.conf`, override libpod configuration path - -## HISTORY -Apr 2018, Originally compiled by Nathan Williams <nath.e.will@gmail.com> diff --git a/docs/source/markdown/podman-attach.1.md b/docs/source/markdown/podman-attach.1.md index 1ac2e49a9..cb3ffa92e 100644 --- a/docs/source/markdown/podman-attach.1.md +++ b/docs/source/markdown/podman-attach.1.md @@ -15,7 +15,7 @@ or name, either to view its ongoing output or to control it interactively. You can detach from the container (and leave it running) using a configurable key sequence. The default sequence is `ctrl-p,ctrl-q`. Configure the keys sequence using the **--detach-keys** option, or specifying -it in the **libpod.conf** file: see **libpod.conf(5)** for more information. +it in the **containers.conf** file: see **containers.conf(5)** for more information. ## OPTIONS **--detach-keys**=*sequence* @@ -55,4 +55,4 @@ $ podman attach 1234 $ podman attach --no-stdin foobar ``` ## SEE ALSO -podman(1), podman-exec(1), podman-run(1) +podman(1), podman-exec(1), podman-run(1), containers.conf(5) diff --git a/docs/source/markdown/podman-create.1.md b/docs/source/markdown/podman-create.1.md index 61bcec57a..94d2628b2 100644 --- a/docs/source/markdown/podman-create.1.md +++ b/docs/source/markdown/podman-create.1.md @@ -190,7 +190,7 @@ detached container with **podman attach**. When attached in the tty mode, you can detach from the container (and leave it running) using a configurable key sequence. The default sequence is `ctrl-p,ctrl-q`. Configure the keys sequence using the **--detach-keys** option, or specifying -it in the **libpod.conf** file: see **libpod.conf(5)** for more information. +it in the **containers.conf** file: see **containers.conf(5)** for more information. **--detach-keys**=*sequence* @@ -741,7 +741,7 @@ Security Options - `seccomp=unconfined` : Turn off seccomp confinement for the container - `seccomp=profile.json` : White listed syscalls seccomp Json file to be used as a seccomp filter -Note: Labeling can be disabled for all containers by setting label=false in the **libpod.conf** (`/etc/containers/libpod.conf`) file. +Note: Labeling can be disabled for all containers by setting label=false in the **containers.conf** (`/etc/containers/containers.conf` or `$HOME/.config/containers/containers.conf`) file. **--shm-size**=*size* @@ -989,7 +989,7 @@ where source dir is mounted on) has to have right propagation properties. For shared volumes, source mount point has to be shared. And for slave volumes, source mount has to be either shared or slave. <sup>[[1]](#Footnote1)</sup> -If you want to recursively mount a volume and all of it's submounts into a +If you want to recursively mount a volume and all of its submounts into a container, then you can use the `rbind` option. By default the bind option is used, and submounts of the source directory will not be mounted into the container. @@ -1149,7 +1149,7 @@ b NOTE: Use the environment variable `TMPDIR` to change the temporary storage location of downloaded container images. Podman defaults to use `/var/tmp`. ## SEE ALSO -**subgid**(5), **subuid**(5), **libpod.conf**(5), **systemd.unit**(5), **setsebool**(8), **slirp4netns**(1), **fuse-overlayfs**(1). +**subgid**(5), **subuid**(5), **containers.conf**(5), **systemd.unit**(5), **setsebool**(8), **slirp4netns**(1), **fuse-overlayfs**(1). ## HISTORY October 2017, converted from Docker documentation to Podman by Dan Walsh for Podman <dwalsh@redhat.com> diff --git a/docs/source/markdown/podman-events.1.md b/docs/source/markdown/podman-events.1.md index abfc6e9c1..0d91cdf17 100644 --- a/docs/source/markdown/podman-events.1.md +++ b/docs/source/markdown/podman-events.1.md @@ -10,7 +10,7 @@ podman\-events - Monitor Podman events Monitor and print events that occur in Podman. Each event will include a timestamp, a type, a status, name (if applicable), and image (if applicable). The default logging -mechanism is *journald*. This can be changed in libpod.conf by changing the `events_logger` +mechanism is *journald*. This can be changed in containers.conf by changing the `events_logger` value to `file`. Only `file` and `journald` are accepted. A `none` logger is also available but this logging mechanism completely disables events; nothing will be reported by `podman events`. @@ -150,7 +150,7 @@ $ podman events --format json ``` ## SEE ALSO -podman(1) +podman(1), containers.conf(5) ## HISTORY March 2019, Originally compiled by Brent Baude <bbaude@redhat.com> diff --git a/docs/source/markdown/podman-run.1.md b/docs/source/markdown/podman-run.1.md index 5c031c204..b565cdfab 100644 --- a/docs/source/markdown/podman-run.1.md +++ b/docs/source/markdown/podman-run.1.md @@ -208,7 +208,7 @@ Specify the key sequence for detaching a container; _sequence_ is a comma-delimi in which each item can be a single character from the [a-Z] range, or **ctrl**-_value_, where _value_ is one of: **a-z** or **@^[,_**. -This option can also be set in **libpod.conf**(5) file. +This option can also be set in **containers.conf**(5) file. Specifying "" will disable this feature. The default is **ctrl-p,ctrl-q**. @@ -759,7 +759,7 @@ Security Options - **seccomp=unconfined**: Turn off seccomp confinement for the container - **seccomp**=_profile.json_: Allowed syscall list seccomp JSON file to be used as a seccomp filter -Note: Labeling can be disabled for all containers by setting **label=false** in the **libpod.conf**(5) file. +Note: Labeling can be disabled for all containers by setting **label=false** in the **containers.conf**(5) file. **--shm-size**=_number_[_unit_] @@ -1255,8 +1255,8 @@ $ podman run -p 8080:80 -d -i -t fedora/httpd To mount a host directory as a container volume, specify the absolute path to the directory and the absolute path for the container directory separated by a -colon. If the source is a named volume maintained by Podman, it's recommended to -use it's name rather than the path to the volume. Otherwise the volume will be +colon. If the source is a named volume maintained by Podman, it is recommended to +use its name rather than the path to the volume. Otherwise the volume will be considered as an orphan and wiped if you execute **podman volume prune**: ``` @@ -1427,7 +1427,7 @@ b NOTE: Use the environment variable `TMPDIR` to change the temporary storage location of downloaded container images. Podman defaults to use `/var/tmp`. ## SEE ALSO -**subgid**(5), **subuid**(5), **libpod.conf**(5), **systemd.unit**(5), **setsebool**(8), **slirp4netns**(1), **fuse-overlayfs**(1). +**subgid**(5), **subuid**(5), **containers.conf**(5), **systemd.unit**(5), **setsebool**(8), **slirp4netns**(1), **fuse-overlayfs**(1). ## HISTORY September 2018, updated by Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp> diff --git a/docs/source/markdown/podman-system-migrate.1.md b/docs/source/markdown/podman-system-migrate.1.md index baabfd14b..29c0ef94b 100644 --- a/docs/source/markdown/podman-system-migrate.1.md +++ b/docs/source/markdown/podman-system-migrate.1.md @@ -33,7 +33,7 @@ This can be used after a system upgrade which changes the default OCI runtime to There are no guarantees that the containers will continue to work under the new runtime, as some runtimes support differing options and configurations. ## SEE ALSO -`podman(1)`, `libpod.conf(5)`, `usermod(8)` +`podman(1)`, `containers.conf(5)`, `usermod(8)` ## HISTORY April 2019, Originally compiled by Giuseppe Scrivano (gscrivan at redhat dot com) diff --git a/docs/source/markdown/podman-system-renumber.1.md b/docs/source/markdown/podman-system-renumber.1.md index 071eefe29..51c085606 100644 --- a/docs/source/markdown/podman-system-renumber.1.md +++ b/docs/source/markdown/podman-system-renumber.1.md @@ -9,9 +9,9 @@ podman\-system\-renumber - Migrate lock numbers to handle a change in maximum nu ## DESCRIPTION **podman system renumber** renumbers locks used by containers and pods. -Each Podman container and pod is allocated a lock at creation time, up to a maximum number controlled by the **num_locks** parameter in **libpod.conf**. +Each Podman container and pod is allocated a lock at creation time, up to a maximum number controlled by the **num_locks** parameter in **containers.conf**. -When all available locks are exhausted, no further containers and pods can be created until some existing containers and pods are removed. This can be avoided by increasing the number of locks available via modifying **libpod.conf** and subsequently running **podman system renumber** to prepare the new locks (and reallocate lock numbers to fit the new struct). +When all available locks are exhausted, no further containers and pods can be created until some existing containers and pods are removed. This can be avoided by increasing the number of locks available via modifying **containers.conf** and subsequently running **podman system renumber** to prepare the new locks (and reallocate lock numbers to fit the new struct). **podman system renumber** must be called after any changes to **num_locks** - failure to do so will result in errors starting Podman as the number of locks available conflicts with the configured number of locks. @@ -20,7 +20,7 @@ When all available locks are exhausted, no further containers and pods can be cr If possible, avoid calling **podman system renumber** while there are other Podman processes running. ## SEE ALSO -`podman(1)`, `libpod.conf(5)` +`podman(1)`, `containers.conf(5)` ## HISTORY February 2019, Originally compiled by Matt Heon (mheon at redhat dot com) diff --git a/docs/source/markdown/podman.1.md b/docs/source/markdown/podman.1.md index c45c10243..776ee7a67 100644 --- a/docs/source/markdown/podman.1.md +++ b/docs/source/markdown/podman.1.md @@ -23,7 +23,7 @@ created by the other. **--cgroup-manager**=*manager* -CGroup manager to use for container cgroups. Supported values are cgroupfs or systemd. Default is systemd unless overridden in the libpod.conf file. +The CGroup manager to use for container cgroups. Supported values are cgroupfs or systemd. Default is systemd unless overridden in the containers.conf file. Note: Setting this flag can cause certain commands to break when called on containers previously created by the other CGroup manager type. Note: CGroup manager is not supported in rootless mode when using CGroups Version V1. @@ -32,7 +32,7 @@ Note: CGroup manager is not supported in rootless mode when using CGroups Versio Path of the configuration directory for CNI networks. (Default: `/etc/cni/net.d`) **--conmon** -Path of the conmon binary (Default path is configured in `libpod.conf`) +Path of the conmon binary (Default path is configured in `containers.conf`) **--events-backend**=*type* @@ -94,7 +94,7 @@ Default state dir configured in `/etc/containers/storage.conf`. **--runtime**=*value* -Name of the OCI runtime as specified in libpod.conf or absolute path to the OCI compatible binary used to run containers. +Name of the OCI runtime as specified in containers.conf or absolute path to the OCI compatible binary used to run containers. **--storage-driver**=*value* @@ -217,11 +217,13 @@ the exit codes follow the `chroot` standard, see below: ## FILES -**libpod.conf** (`/usr/share/containers/libpod.conf`) +**containers.conf** (`/usr/share/containers/containers.conf`) - libpod.conf is the configuration file for all tools using libpod to manage containers, when run as root. Administrators can override the defaults file by creating `/etc/containers/libpod.conf`. When Podman runs in rootless mode, the file `$HOME/.config/containers/libpod.conf` is created and replaces some fields in the system configuration file. + Podman has builtin defaults for command line options. These defaults can be overridden using the containers.conf configuration files. - Podman uses builtin defaults if no libpod.conf file is found. +Distributions ship the `/usr/share/containers/containers.conf` file with their default settings. Administrators can override fields in this file by creating the `/etc/containers/containers.conf` file. Users can further modify defaults by creating the `$HOME/.config/containers/containers.conf` file. Podman merges its builtin defaults with the specified fields from these files, if they exist. Fields specified in the users file override the administrator's file, which overrides the distribution's file, which override the built-in defaults. + +Podman uses builtin defaults if no containers.conf file is found. **mounts.conf** (`/usr/share/containers/mounts.conf`) @@ -280,7 +282,7 @@ The Network File System (NFS) and other distributed file systems (for example: L For more information, please refer to the [Podman Troubleshooting Page](https://github.com/containers/libpod/blob/master/troubleshooting.md). ## SEE ALSO -`containers-mounts.conf(5)`, `containers-registries.conf(5)`, `containers-storage.conf(5)`, `buildah(1)`, `libpod.conf(5)`, `oci-hooks(5)`, `containers-policy.json(5)`, `subuid(5)`, `subgid(5)`, `slirp4netns(1)` +`containers-mounts.conf(5)`, `containers-registries.conf(5)`, `containers-storage.conf(5)`, `buildah(1)`, `containers.conf(5)`, `oci-hooks(5)`, `containers-policy.json(5)`, `subuid(5)`, `subgid(5)`, `slirp4netns(1)` ## HISTORY Dec 2016, Originally compiled by Dan Walsh <dwalsh@redhat.com> |