5 files changed, 57 insertions, 5 deletions
diff --git a/docs/source/markdown/podman-container-clone.1.md b/docs/source/markdown/podman-container-clone.1.md
index 6c23abe81..7d5e1c262 100644
--- a/docs/source/markdown/podman-container-clone.1.md
+++ b/docs/source/markdown/podman-container-clone.1.md
@@ -137,6 +137,33 @@ system's page size (the value would be very large, that's millions of trillions)
 
 If no memory limits are specified, the original container's will be used.
 
+#### **--memory-reservation**=*limit*
+
+Memory soft limit (format: `<number>[<unit>]`, where unit = b (bytes), k (kilobytes), m (megabytes), or g (gigabytes))
+
+After setting memory reservation, when the system detects memory contention
+or low memory, containers are forced to restrict their consumption to their
+reservation. So you should always set the value below **--memory**, otherwise the
+hard limit will take precedence. By default, memory reservation will be the same
+as memory limit from the container being cloned.
+
+#### **--memory-swap**=*limit*
+
+A limit value equal to memory plus swap. Must be used with the  **-m**
+(**--memory**) flag. The swap `LIMIT` should always be larger than **-m**
+(**--memory**) value. By default, the swap `LIMIT` will be set to double
+the value of --memory if specified. Otherwise, the container being cloned will be used to derive the swap value.
+
+The format of `LIMIT` is `<number>[<unit>]`. Unit can be `b` (bytes),
+`k` (kilobytes), `m` (megabytes), or `g` (gigabytes). If you don't specify a
+unit, `b` is used. Set LIMIT to `-1` to enable unlimited swap.
+
+#### **--memory-swappiness**=*number*
+
+Tune a container's memory swappiness behavior. Accepts an integer between 0 and 100.
+
+This flag is not supported on cgroups V2 systems.
+
 #### **--name**
 
 Set a custom name for the cloned container. The default if not specified is of the syntax: **<ORIGINAL_NAME>-clone**
diff --git a/docs/source/markdown/podman-container-inspect.1.md b/docs/source/markdown/podman-container-inspect.1.md
index 9945fca7c..4e45bcc40 100644
--- a/docs/source/markdown/podman-container-inspect.1.md
+++ b/docs/source/markdown/podman-container-inspect.1.md
@@ -219,7 +219,7 @@ $ podman container inspect foobar
             "DnsSearch": [],
             "ExtraHosts": [],
             "GroupAdd": [],
-            "IpcMode": "private",
+            "IpcMode": "shareable",
             "Cgroup": "",
             "Cgroups": "default",
             "Links": null,
diff --git a/docs/source/markdown/podman-create.1.md b/docs/source/markdown/podman-create.1.md
index c4d27e321..45d0d0b3e 100644
--- a/docs/source/markdown/podman-create.1.md
+++ b/docs/source/markdown/podman-create.1.md
@@ -504,10 +504,16 @@ To specify multiple static IPv6 addresses per container, set multiple networks u
 
 #### **--ipc**=*ipc*
 
-Default is to create a private IPC namespace (POSIX SysV IPC) for the container
-		`container:<name|id>`: reuses another container shared memory, semaphores and message queues
-		`host`: use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure.
-		`ns:<path>` path to an IPC namespace to join.
+Set the IPC namespace mode for a container. The default is to create
+a private IPC namespace.
+
+- "": Use Podman's default, defined in containers.conf.
+- **container:**_id_: reuses another container's shared memory, semaphores, and message queues
+- **host**: use the host's shared memory, semaphores, and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure.
+- **none**:  private IPC namespace, with /dev/shm not mounted.
+- **ns:**_path_: path to an IPC namespace to join.
+- **private**: private IPC namespace.
+= **shareable**: private IPC namespace with a possibility to share it with other containers.
 
 #### **--label**, **-l**=*label*
 
@@ -755,6 +761,12 @@ Tune the host's OOM preferences for containers (accepts -1000 to 1000)
 #### **--os**=*OS*
 Override the OS, defaults to hosts, of the image to be pulled. For example, `windows`.
 
+#### **--passwd-entry**=*ENTRY*
+
+Customize the entry that is written to the `/etc/passwd` file within the container when `--passwd` is used.
+
+The variables $USERNAME, $UID, $GID, $NAME, $HOME are automatically replaced with their value at runtime.
+
 #### **--personality**=*persona*
 
 Personality sets the execution domain via Linux personality(2).
diff --git a/docs/source/markdown/podman-machine-init.1.md b/docs/source/markdown/podman-machine-init.1.md
index ac258eaae..33947bbba 100644
--- a/docs/source/markdown/podman-machine-init.1.md
+++ b/docs/source/markdown/podman-machine-init.1.md
@@ -83,6 +83,9 @@ Podman mounts _host-dir_ in the host to _machine-dir_ in the Podman machine.
 The root filesystem is mounted read-only in the default operating system,
 so mounts must be created under the /mnt directory.
 
+Default volume mounts are defined in *containers.conf*.  Unless changed, the default values
+is `$HOME:$HOME`.
+
 #### **--volume-driver**
 
 Driver to use for mounting volumes from the host, such as `virtfs`.
diff --git a/docs/source/markdown/podman-run.1.md b/docs/source/markdown/podman-run.1.md
index e4ccd0368..5c276c04a 100644
--- a/docs/source/markdown/podman-run.1.md
+++ b/docs/source/markdown/podman-run.1.md
@@ -528,9 +528,13 @@ To specify multiple static IPv6 addresses per container, set multiple networks u
 Set the IPC namespace mode for a container. The default is to create
 a private IPC namespace.
 
+- "": Use Podman's default, defined in containers.conf.
 - **container:**_id_: reuses another container shared memory, semaphores and message queues
 - **host**: use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure.
+- **none**:  private IPC namespace, with /dev/shm not mounted.
 - **ns:**_path_: path to an IPC namespace to join.
+- **private**: private IPC namespace.
+= **shareable**: private IPC namespace with a possibility to share it with  other containers.
 
 #### **--label**, **-l**=*key*=*value*
 
@@ -787,6 +791,12 @@ Override the OS, defaults to hosts, of the image to be pulled. For example, `win
 Allow Podman to add entries to /etc/passwd and /etc/group when used in conjunction with the --user option.
 This is used to override the Podman provided user setup in favor of entrypoint configurations such as libnss-extrausers.
 
+#### **--passwd-entry**=*ENTRY*
+
+Customize the entry that is written to the `/etc/passwd` file within the container when `--passwd` is used.
+
+The variables $USERNAME, $UID, $GID, $NAME, $HOME are automatically replaced with their value at runtime.
+
 #### **--personality**=*persona*
 
 Personality sets the execution domain via Linux personality(2).