diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/tutorials/rootless_tutorial.md | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/docs/tutorials/rootless_tutorial.md b/docs/tutorials/rootless_tutorial.md index 18f60ea00..5d20f2cc0 100644 --- a/docs/tutorials/rootless_tutorial.md +++ b/docs/tutorials/rootless_tutorial.md @@ -13,31 +13,31 @@ The alternative OCI runtime support for cgroup V2 can also be turned on at the c ``` podman --runtime crun ``` -or for all commands by changing the value for the "Default OCI runtime" in the containers.conf file either at the system level or at the [user level](#user-configuration-files) from `runtime = "runc"` to `runtime = "crun"`. +or for all commands by changing the value for the "Default OCI runtime" in the `containers.conf` file either at the system level or at the [user level](#user-configuration-files) from `runtime = "runc"` to `runtime = "crun"`. ## Administrator Actions ### Installing Podman -For installing Podman, please see the [installation instructions](https://github.com/containers/podman/blob/master/install.md). +For installing Podman, please see the [installation instructions](https://github.com/containers/podman/blob/main/install.md). ### Building Podman -For building Podman, please see the [installation instructions](https://github.com/containers/podman/blob/master/install.md#building-from-scratch). +For building Podman, please see the [installation instructions](https://github.com/containers/podman/blob/main/install.md#building-from-scratch). -### Install slirp4netns +### Install `slirp4netns` -The [slirp4netns](https://github.com/rootless-containers/slirp4netns) package provides user-mode networking for unprivileged network namespaces and must be installed on the machine in order for Podman to run in a rootless environment. The package is available on most Linux distributions via their package distribution software such as yum, dnf, apt, zypper, etc. If the package is not available, you can build and install slirp4netns from [GitHub](https://github.com/rootless-containers/slirp4netns). +The [slirp4netns](https://github.com/rootless-containers/slirp4netns) package provides user-mode networking for unprivileged network namespaces and must be installed on the machine in order for Podman to run in a rootless environment. The package is available on most Linux distributions via their package distribution software such as `yum`, `dnf`, `apt`, `zypper`, etc. If the package is not available, you can build and install `slirp4netns` from [GitHub](https://github.com/rootless-containers/slirp4netns). -### Ensure fuse-overlayfs is installed +### Ensure `fuse-overlayfs` is installed -When using Podman in a rootless environment, it is recommended to use fuse-overlayfs rather than the VFS file system. For that you need the `fuse-overlayfs` executable available in `$PATH`. +When using Podman in a rootless environment, it is recommended to use `fuse-overlayfs` rather than the VFS file system. For that you need the `fuse-overlayfs` executable available in `$PATH`. Your distribution might already provide it in the `fuse-overlayfs` package, but be aware that you need at least version **0.7.6**. This especially needs to be checked on Ubuntu distributions as `fuse-overlayfs` is not generally installed by default and the 0.7.6 version is not available natively on Ubuntu releases prior to **20.04**. -The fuse-overlayfs project is available from [GitHub](https://github.com/containers/fuse-overlayfs), and provides instructions for easily building a static `fuse-overlayfs` executable. +The `fuse-overlayfs` project is available from [GitHub](https://github.com/containers/fuse-overlayfs), and provides instructions for easily building a static `fuse-overlayfs` executable. -If Podman is used before fuse-overlayfs is installed, it may be necessary to adjust the `storage.conf` file (see "User Configuration Files" below) to change the `driver` option under `[storage]` to `"overlay"` and point the `mount_program` option in `[storage.options]` to the path of the `fuse-overlayfs` executable: +If Podman is used before `fuse-overlayfs` is installed, it may be necessary to adjust the `storage.conf` file (see "User Configuration Files" below) to change the `driver` option under `[storage]` to `"overlay"` and point the `mount_program` option in `[storage.options]` to the path of the `fuse-overlayfs` executable: ``` [storage] @@ -54,13 +54,13 @@ If Podman is used before fuse-overlayfs is installed, it may be necessary to adj ### Enable user namespaces (on RHEL7 machines) -The number of user namespaces that are allowed on the system is specified in the file `/proc/sys/user/max_user_namespaces`. On most Linux platforms this is preset by default and no adjustment is necessary. However on RHEL7 machines a user with root privileges may need to set that to a reasonable value by using this command: `sysctl user.max_user_namespaces=15000`. +The number of user namespaces that are allowed on the system is specified in the file `/proc/sys/user/max_user_namespaces`. On most Linux platforms this is preset by default and no adjustment is necessary. However, on RHEL7 machines, a user with root privileges may need to set that to a reasonable value by using this command: `sysctl user.max_user_namespaces=15000`. -### /etc/subuid and /etc/subgid configuration +### `/etc/subuid` and `/etc/subgid` configuration -Rootless Podman requires the user running it to have a range of UIDs listed in /etc/subuid and /etc/subgid files. The `shadow-utils` or `newuid` package provides these files on different distributions and they must be installed on the system. These files will need someone with root privileges on the system to add or update the entries within them. The following is a summarization from the [How does rootless Podman work?](https://opensource.com/article/19/2/how-does-rootless-podman-work) article by Dan Walsh on [opensource.com](https://opensource.com) +Rootless Podman requires the user running it to have a range of UIDs listed in the files `/etc/subuid` and `/etc/subgid`. The `shadow-utils` or `newuid` package provides these files on different distributions and they must be installed on the system. Root privileges are required to add or update entries within these files. The following is a summary from the [How does rootless Podman work?](https://opensource.com/article/19/2/how-does-rootless-podman-work) article by Dan Walsh on [opensource.com](https://opensource.com) -Update the /etc/subuid and /etc/subgid with fields for each user that will be allowed to create containers that look like the following. Note that the values for each user must be unique and without any overlap. If there is an overlap, there is a potential for a user to use another’s namespace and they could corrupt it. +For each user that will be allowed to create containers, update `/etc/subuid` and `/etc/subgid` for the user with fields that look like the following. Note that the values for each user must be unique. If there is overlap, there is a potential for a user to use another user's namespace and they could corrupt it. ``` cat /etc/subuid @@ -68,17 +68,17 @@ johndoe:100000:65536 test:165536:65536 ``` -The format of this file is USERNAME:UID:RANGE +The format of this file is `USERNAME:UID:RANGE` -* username as listed in /etc/passwd or getpwent. -* The initial uid allocated for the user. +* username as listed in `/etc/passwd` or in the output of [`getpwent`](https://man7.org/linux/man-pages/man3/getpwent.3.html). +* The initial UID allocated for the user. * The size of the range of UIDs allocated for the user. -This means the user johndoe is allocated UIDS 100000-165535 as well as their standard UID in the /etc/passwd file. NOTE: this is not currently supported with network installs. These files must be available locally to the host machine. It is not possible to configure this with LDAP or Active Directory. +This means the user `johndoe` is allocated UIDs 100000-165535 as well as their standard UID in the `/etc/passwd` file. NOTE: this is not currently supported with network installs; these files must be available locally to the host machine. It is not possible to configure this with LDAP or Active Directory. -If you update either the /etc/subuid or the /etc/subgid file, you need to stop all the running containers owned by the user and kill the pause process that is running on the system for that user. This can be done automatically by using the [`podman system migrate`](https://github.com/containers/podman/blob/master/docs/podman-system-migrate.1.md) command which will stop all the containers for the user and will kill the pause process. +If you update either `/etc/subuid` or `/etc/subgid`, you need to stop all the running containers owned by the user and kill the pause process that is running on the system for that user. This can be done automatically by using the [`podman system migrate`](https://github.com/containers/podman/blob/main/docs/source/markdown/podman-system-migrate.1.md) command which will stop all the containers for the user and will kill the pause process. -Rather than updating the files directly, the usermod program can be used to assign UIDs and GIDs to a user. +Rather than updating the files directly, the `usermod` program can be used to assign UIDs and GIDs to a user. ``` usermod --add-subuids 200000-201000 --add-subgids 200000-201000 johndoe @@ -102,13 +102,13 @@ To make the change persist, the administrator will need to add a file with the ` The majority of the work necessary to run Podman in a rootless environment is on the shoulders of the machine’s administrator. -Once the Administrator has completed the setup on the machine and then the configurations for the user in /etc/subuid and /etc/subgid, the user can just start using any Podman command that they wish. +Once the Administrator has completed the setup on the machine and then the configurations for the user in `/etc/subuid` and `/etc/subgid`, the user can just start using any Podman command that they wish. ### User Configuration Files The Podman configuration files for root reside in `/usr/share/containers` with overrides in `/etc/containers`. In the rootless environment they reside in `${XDG_CONFIG_HOME}/containers` (usually `~/.config/containers`) and are owned by each individual user. -The three main configuration files are [containers.conf](https://github.com/containers/common/blob/master/docs/containers.conf.5.md), [storage.conf](https://github.com/containers/storage/blob/master/docs/containers-storage.conf.5.md) and [registries.conf](https://github.com/containers/image/blob/master/docs/containers-registries.conf.5.md). The user can modify these files as they wish. +The three main configuration files are [containers.conf](https://github.com/containers/common/blob/main/docs/containers.conf.5.md), [storage.conf](https://github.com/containers/storage/blob/main/docs/containers-storage.conf.5.md) and [registries.conf](https://github.com/containers/image/blob/main/docs/containers-registries.conf.5.md). The user can modify these files as they wish. #### containers.conf Podman reads @@ -123,7 +123,7 @@ For `storage.conf` the order is 1. `/etc/containers/storage.conf` 2. `$HOME/.config/containers/storage.conf` -In rootless podman certain fields in `/etc/containers/storage.conf` are ignored. These fields are: +In rootless Podman certain fields in `/etc/containers/storage.conf` are ignored. These fields are: ``` graphroot="" container storage graph dir (default: "/var/lib/containers/storage") @@ -133,7 +133,7 @@ runroot="" container storage run dir (default: "/run/containers/storage") Default directory to store all temporary writable content created by container storage programs. ``` -In rootless podman these fields default to +In rootless Podman these fields default to ``` graphroot="$HOME/.local/share/containers/storage" runroot="$XDG_RUNTIME_DIR/containers" @@ -146,14 +146,14 @@ Registry configuration is read in by this order 2. `/etc/containers/registries.d/*` 3. `HOME/.config/containers/registries.conf` -The files in the home directory should be used to configure rootless podman for personal needs. These files are not created by default. Users can copy the files from `/usr/share/containers` or `/etc/containers` and modify them. +The files in the home directory should be used to configure rootless Podman for personal needs. These files are not created by default. Users can copy the files from `/usr/share/containers` or `/etc/containers` and modify them. #### Authorization files The default authorization file used by the `podman login` and `podman logout` commands reside in `${XDG_RUNTIME_DIR}/containers/auth.json`. ### Using volumes -Rootless Podman is not, and will never be, root; it's not a setuid binary, and gains no privileges when it runs. Instead, Podman makes use of a user namespace to shift the UIDs and GIDs of a block of users it is given access to on the host (via the newuidmap and newgidmap executables) and your own user within the containers that Podman creates. +Rootless Podman is not, and will never be, root; it's not a `setuid` binary, and gains no privileges when it runs. Instead, Podman makes use of a user namespace to shift the UIDs and GIDs of a block of users it is given access to on the host (via the `newuidmap` and `newgidmap` executables) and your own user within the containers that Podman creates. If your container runs with the root user, then `root` in the container is actually your user on the host. UID/GID 1 is the first UID/GID specified in your user's mapping in `/etc/subuid` and `/etc/subgid`, etc. If you mount a directory from the host into a container as a rootless user, and create a file in that directory as root in the container, you'll see it's actually owned by your user on the host. @@ -193,6 +193,6 @@ Other considerations in regards to volumes: ## More information -If you are still experiencing problems running Podman in a rootless environment, please refer to the [Shortcomings of Rootless Podman](https://github.com/containers/podman/blob/master/rootless.md) page which lists known issues and solutions to known issues in this environment. +If you are still experiencing problems running Podman in a rootless environment, please refer to the [Shortcomings of Rootless Podman](https://github.com/containers/podman/blob/main/rootless.md) page which lists known issues and solutions to known issues in this environment. -For more information on Podman and its subcommands, checkout the asciiart demos on the [README.md](../../README.md#commands) page or the [podman.io](https://podman.io) web site. +For more information on Podman and its subcommands, follow the links on the main [README.md](../../README.md#podman-information-for-developers) page or the [podman.io](https://podman.io) web site. |