diff options
Diffstat (limited to 'test/system')
| -rw-r--r-- | test/system/160-volumes.bats | 39 | ||||
| -rw-r--r-- | test/system/170-run-userns.bats | 4 | ||||
| -rw-r--r-- | test/system/600-completion.bats | 92 |
3 files changed, 117 insertions, 18 deletions
diff --git a/test/system/160-volumes.bats b/test/system/160-volumes.bats index 5b0460723..797883ec6 100644 --- a/test/system/160-volumes.bats +++ b/test/system/160-volumes.bats @@ -411,4 +411,43 @@ NeedsChown | true fi } +@test "podman --image-volume" { + tmpdir=$PODMAN_TMPDIR/volume-test + mkdir -p $tmpdir + containerfile=$tmpdir/Containerfile + cat >$containerfile <<EOF +FROM $IMAGE +VOLUME /data +EOF + fs=$(stat -f -c %T .) + run_podman build -t volume_image $tmpdir + + containersconf=$tmpdir/containers.conf + cat >$containersconf <<EOF +[engine] +image_volume_mode="tmpfs" +EOF + + run_podman run --image-volume tmpfs --rm volume_image stat -f -c %T /data + is "$output" "tmpfs" "Should be tmpfs" + + run_podman 1 run --image-volume ignore --rm volume_image stat -f -c %T /data + is "$output" "stat: can't read file system information for '/data': No such file or directory" "Should fail with /data does not exists" + + CONTAINERS_CONF="$containersconf" run_podman run --rm volume_image stat -f -c %T /data + is "$output" "tmpfs" "Should be tmpfs" + + CONTAINERS_CONF="$containersconf" run_podman run --image-volume bind --rm volume_image stat -f -c %T /data + assert "$output" != "tmpfs" "Should match hosts $fs" + + CONTAINERS_CONF="$containersconf" run_podman run --image-volume tmpfs --rm volume_image stat -f -c %T /data + is "$output" "tmpfs" "Should be tmpfs" + + CONTAINERS_CONF="$containersconf" run_podman 1 run --image-volume ignore --rm volume_image stat -f -c %T /data + is "$output" "stat: can't read file system information for '/data': No such file or directory" "Should fail with /data does not exists" + + run_podman rm --all --force -t 0 + run_podman image rm --force localhost/volume_image +} + # vim: filetype=sh diff --git a/test/system/170-run-userns.bats b/test/system/170-run-userns.bats index b80351902..46cb37b9d 100644 --- a/test/system/170-run-userns.bats +++ b/test/system/170-run-userns.bats @@ -38,10 +38,12 @@ function _require_crun() { @test "rootful pod with custom ID mapping" { skip_if_rootless "does not work rootless - rootful feature" - skip_if_remote "remote --uidmap is broken (see #14233)" random_pod_name=$(random_string 30) run_podman pod create --uidmap 0:200000:5000 --name=$random_pod_name run_podman pod start $random_pod_name + run_podman pod inspect --format '{{.InfraContainerID}}' $random_pod_name + run podman inspect --format '{{.HostConfig.IDMappings.UIDMap}}' $output + is "$output" ".*0:200000:5000" "UID Map Successful" # Remove the pod and the pause image run_podman pod rm $random_pod_name diff --git a/test/system/600-completion.bats b/test/system/600-completion.bats index 018e95e78..2de9b1ae1 100644 --- a/test/system/600-completion.bats +++ b/test/system/600-completion.bats @@ -8,6 +8,16 @@ load helpers +function setup() { + # $PODMAN may be a space-separated string, e.g. if we include a --url. + local -a podman_as_array=($PODMAN) + # __completeNoDesc must be the first arg if we running the completion cmd + # set the var for the run_completion function + PODMAN_COMPLETION="${podman_as_array[0]} __completeNoDesc ${podman_as_array[@]:1}" + + basic_setup +} + # Returns true if we are able to podman-pause function _can_pause() { # Even though we're just trying completion, not an actual unpause, @@ -88,8 +98,14 @@ function check_shell_completion() { continue 2 fi + name=$random_container_name + # special case podman cp suggest containers names with a colon + if [[ $cmd = "cp" ]]; then + name="$name:" + fi + run_completion "$@" $cmd "${extra_args[@]}" "" - is "$output" ".*-$random_container_name${nl}" \ + is "$output" ".*-$name${nl}" \ "$* $cmd: actual container listed in suggestions" match=true @@ -175,7 +191,7 @@ function check_shell_completion() { _check_completion_end NoSpace else _check_completion_end Default - assert "${#lines[@]}" -eq 2 "$* $cmd: Suggestions are in the output" + _check_no_suggestions fi ;; @@ -205,16 +221,7 @@ function check_shell_completion() { if [[ ! ${args##* } =~ "..." ]]; then run_completion "$@" $cmd "${extra_args[@]}" "" _check_completion_end NoFileComp - if [ ${#lines[@]} -gt 2 ]; then - # checking for line count is not enough since we may include additional debug output - # lines starting with [Debug] are allowed - i=0 - length=$(( ${#lines[@]} - 2 )) - while [[ i -lt length ]]; do - assert "${lines[$i]:0:7}" == "[Debug]" "Suggestions are in the output" - i=$(( i + 1 )) - done - fi + _check_no_suggestions fi done @@ -231,6 +238,24 @@ function _check_completion_end() { is "${lines[-1]}" "Completion ended with directive: ShellCompDirective$1" "Completion has wrong ShellCompDirective set" } +# Check that there are no suggestions in the output. +# We could only check stdout and not stderr but this is not possible with bats. +# By default we always have two extra lines at the end for the ShellCompDirective. +# Then we could also have other extra lines for debugging, they will always start +# with [Debug], e.g. `[Debug] [Error] no container with name or ID "t12" found: no such container`. +function _check_no_suggestions() { + if [ ${#lines[@]} -gt 2 ]; then + # Checking for line count is not enough since we may include additional debug output. + # Lines starting with [Debug] are allowed. + local i=0 + length=$((${#lines[@]} - 2)) + while [[ i -lt length ]]; do + assert "${lines[$i]:0:7}" == "[Debug]" "Unexpected non-Debug output line: ${lines[$i]}" + i=$((i + 1)) + done + fi +} + @test "podman shell completion test" { @@ -280,11 +305,6 @@ function _check_completion_end() { # create secret run_podman secret create $random_secret_name $secret_file - # $PODMAN may be a space-separated string, e.g. if we include a --url. - local -a podman_as_array=($PODMAN) - # __completeNoDesc must be the first arg if we running the completion cmd - PODMAN_COMPLETION="${podman_as_array[0]} __completeNoDesc ${podman_as_array[@]:1}" - # Called with no args -- start with 'podman --help'. check_shell_completion() will # recurse for any subcommands. check_shell_completion @@ -316,3 +336,41 @@ function _check_completion_end() { done <<<"$output" } + +@test "podman shell completion for paths in container/image" { + skip_if_remote "mounting via remote does not work" + for cmd in create run; do + run_completion $cmd $IMAGE "" + assert "$output" =~ ".*^/etc\$.*^/home\$.*^/root\$.*" "root directories suggested (cmd: podman $cmd)" + + # check completion for subdirectory + run_completion $cmd $IMAGE "/etc" + # It should be safe to assume the os-release file always exists in $IMAGE + assert "$output" =~ ".*^/etc/os-release\$.*" "/etc files suggested (cmd: podman $cmd /etc)" + # check completion for partial file name + run_completion $cmd $IMAGE "/etc/os-" + assert "$output" =~ ".*^/etc/os-release\$.*" "/etc files suggested (cmd: podman $cmd /etc/os-)" + + # check completion with relative path components + # It is important the we will still use the image root and not escape to the host + run_completion $cmd $IMAGE "../../" + assert "$output" =~ ".*^../../etc\$.*^../../home\$.*" "relative root directories suggested (cmd: podman $cmd ../../)" + done + + random_name=$(random_string 30) + random_file=$(random_string 30) + run_podman run --name $random_name $IMAGE touch /tmp/$random_file + + # check completion for podman cp + run_completion cp "" + assert "$output" =~ ".*^$random_name\:\$.*" "podman cp suggest container names" + + run_completion cp "$random_name:" + assert "$output" =~ ".*^$random_name\:/etc\$.*" "podman cp suggest paths in container" + + run_completion cp "$random_name:/tmp" + assert "$output" =~ ".*^$random_name\:/tmp/$random_file\$.*" "podman cp suggest custom file in container" + + # cleanup container + run_podman rm $random_name +} |