diff options
Diffstat (limited to 'vendor/github.com/juju')
| -rw-r--r-- | vendor/github.com/juju/ansiterm/LICENSE | 191 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/Makefile | 14 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/README.md | 323 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/attribute.go | 50 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/color.go | 119 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/context.go | 95 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/doc.go | 6 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/style.go | 72 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/tabwriter.go | 64 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/tabwriter/LICENSE | 27 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go | 587 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/terminal.go | 32 | ||||
| -rw-r--r-- | vendor/github.com/juju/ansiterm/writer.go | 74 |
13 files changed, 1654 insertions, 0 deletions
diff --git a/vendor/github.com/juju/ansiterm/LICENSE b/vendor/github.com/juju/ansiterm/LICENSE new file mode 100644 index 000000000..ade9307b3 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/LICENSE @@ -0,0 +1,191 @@ +All files in this repository are licensed as follows. If you contribute +to this repository, it is assumed that you license your contribution +under the same license unless you state otherwise. + +All files Copyright (C) 2015 Canonical Ltd. unless otherwise specified in the file. + +This software is licensed under the LGPLv3, included below. + +As a special exception to the GNU Lesser General Public License version 3 +("LGPL3"), the copyright holders of this Library give you permission to +convey to a third party a Combined Work that links statically or dynamically +to this Library without providing any Minimal Corresponding Source or +Minimal Application Code as set out in 4d or providing the installation +information set out in section 4e, provided that you comply with the other +provisions of LGPL3 and provided that you meet, for the Application the +terms and conditions of the license(s) which apply to the Application. + +Except as stated in this special exception, the provisions of LGPL3 will +continue to comply in full to this Library. If you modify this Library, you +may apply this exception to your version of this Library, but you are not +obliged to do so. If you do not wish to do so, delete this exception +statement from your version. This exception does not (and cannot) modify any +license terms which apply to the Application, with which you must still +comply. + + + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. diff --git a/vendor/github.com/juju/ansiterm/Makefile b/vendor/github.com/juju/ansiterm/Makefile new file mode 100644 index 000000000..212fdcbe5 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/Makefile @@ -0,0 +1,14 @@ +# Copyright 2016 Canonical Ltd. +# Licensed under the LGPLv3, see LICENCE file for details. + +default: check + +check: + go test + +docs: + godoc2md github.com/juju/ansiterm > README.md + sed -i 's|\[godoc-link-here\]|[](https://godoc.org/github.com/juju/ansiterm)|' README.md + + +.PHONY: default check docs diff --git a/vendor/github.com/juju/ansiterm/README.md b/vendor/github.com/juju/ansiterm/README.md new file mode 100644 index 000000000..567438721 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/README.md @@ -0,0 +1,323 @@ + +# ansiterm + import "github.com/juju/ansiterm" + +Package ansiterm provides a Writer that writes out the ANSI escape +codes for color and styles. + + + + + + + +## type Color +``` go +type Color int +``` +Color represents one of the standard 16 ANSI colors. + + + +``` go +const ( + Default Color + Black + Red + Green + Yellow + Blue + Magenta + Cyan + Gray + DarkGray + BrightRed + BrightGreen + BrightYellow + BrightBlue + BrightMagenta + BrightCyan + White +) +``` + + + + + + + + +### func (Color) String +``` go +func (c Color) String() string +``` +String returns the name of the color. + + + +## type Context +``` go +type Context struct { + Foreground Color + Background Color + Styles []Style +} +``` +Context provides a way to specify both foreground and background colors +along with other styles and write text to a Writer with those colors and +styles. + + + + + + + + + +### func Background +``` go +func Background(color Color) *Context +``` +Background is a convenience function that creates a Context with the +specified color as the background color. + + +### func Foreground +``` go +func Foreground(color Color) *Context +``` +Foreground is a convenience function that creates a Context with the +specified color as the foreground color. + + +### func Styles +``` go +func Styles(styles ...Style) *Context +``` +Styles is a convenience function that creates a Context with the +specified styles set. + + + + +### func (\*Context) Fprint +``` go +func (c *Context) Fprint(w sgrWriter, args ...interface{}) +``` +Fprint will set the sgr values of the writer to the specified foreground, +background and styles, then formats using the default formats for its +operands and writes to w. Spaces are added between operands when neither is +a string. It returns the number of bytes written and any write error +encountered. + + + +### func (\*Context) Fprintf +``` go +func (c *Context) Fprintf(w sgrWriter, format string, args ...interface{}) +``` +Fprintf will set the sgr values of the writer to the specified +foreground, background and styles, then write the formatted string, +then reset the writer. + + + +### func (\*Context) SetBackground +``` go +func (c *Context) SetBackground(color Color) *Context +``` +SetBackground sets the background to the specified color. + + + +### func (\*Context) SetForeground +``` go +func (c *Context) SetForeground(color Color) *Context +``` +SetForeground sets the foreground to the specified color. + + + +### func (\*Context) SetStyle +``` go +func (c *Context) SetStyle(styles ...Style) *Context +``` +SetStyle replaces the styles with the new values. + + + +## type Style +``` go +type Style int +``` + + +``` go +const ( + Bold Style + Faint + Italic + Underline + Blink + Reverse + Strikethrough + Conceal +) +``` + + + + + + + + +### func (Style) String +``` go +func (s Style) String() string +``` + + +## type TabWriter +``` go +type TabWriter struct { + Writer + // contains filtered or unexported fields +} +``` +TabWriter is a filter that inserts padding around tab-delimited +columns in its input to align them in the output. + +It also setting of colors and styles over and above the standard +tabwriter package. + + + + + + + + + +### func NewTabWriter +``` go +func NewTabWriter(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter +``` +NewTabWriter returns a writer that is able to set colors and styels. +The ansi escape codes are stripped for width calculations. + + + + +### func (\*TabWriter) Flush +``` go +func (t *TabWriter) Flush() error +``` +Flush should be called after the last call to Write to ensure +that any data buffered in the Writer is written to output. Any +incomplete escape sequence at the end is considered +complete for formatting purposes. + + + +### func (\*TabWriter) Init +``` go +func (t *TabWriter) Init(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter +``` +A Writer must be initialized with a call to Init. The first parameter (output) +specifies the filter output. The remaining parameters control the formatting: + + + minwidth minimal cell width including any padding + tabwidth width of tab characters (equivalent number of spaces) + padding padding added to a cell before computing its width + padchar ASCII char used for padding + if padchar == '\t', the Writer will assume that the + width of a '\t' in the formatted output is tabwidth, + and cells are left-aligned independent of align_left + (for correct-looking results, tabwidth must correspond + to the tab width in the viewer displaying the result) + flags formatting control + + + +## type Writer +``` go +type Writer struct { + io.Writer + // contains filtered or unexported fields +} +``` +Writer allows colors and styles to be specified. If the io.Writer +is not a terminal capable of color, all attempts to set colors or +styles are no-ops. + + + + + + + + + +### func NewWriter +``` go +func NewWriter(w io.Writer) *Writer +``` +NewWriter returns a Writer that allows the caller to specify colors and +styles. If the io.Writer is not a terminal capable of color, all attempts +to set colors or styles are no-ops. + + + + +### func (\*Writer) ClearStyle +``` go +func (w *Writer) ClearStyle(s Style) +``` +ClearStyle clears the text style. + + + +### func (\*Writer) Reset +``` go +func (w *Writer) Reset() +``` +Reset returns the default foreground and background colors with no styles. + + + +### func (\*Writer) SetBackground +``` go +func (w *Writer) SetBackground(c Color) +``` +SetBackground sets the background color. + + + +### func (\*Writer) SetForeground +``` go +func (w *Writer) SetForeground(c Color) +``` +SetForeground sets the foreground color. + + + +### func (\*Writer) SetStyle +``` go +func (w *Writer) SetStyle(s Style) +``` +SetStyle sets the text style. + + + + + + + + + +- - - +Generated by [godoc2md](http://godoc.org/github.com/davecheney/godoc2md)
\ No newline at end of file diff --git a/vendor/github.com/juju/ansiterm/attribute.go b/vendor/github.com/juju/ansiterm/attribute.go new file mode 100644 index 000000000..f2daa4813 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/attribute.go @@ -0,0 +1,50 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +import ( + "fmt" + "sort" + "strings" +) + +type attribute int + +const ( + unknownAttribute attribute = -1 + reset attribute = 0 +) + +// sgr returns the escape sequence for the Select Graphic Rendition +// for the attribute. +func (a attribute) sgr() string { + if a < 0 { + return "" + } + return fmt.Sprintf("\x1b[%dm", a) +} + +type attributes []attribute + +func (a attributes) Len() int { return len(a) } +func (a attributes) Less(i, j int) bool { return a[i] < a[j] } +func (a attributes) Swap(i, j int) { a[i], a[j] = a[j], a[i] } + +// sgr returns the combined escape sequence for the Select Graphic Rendition +// for the sequence of attributes. +func (a attributes) sgr() string { + switch len(a) { + case 0: + return "" + case 1: + return a[0].sgr() + default: + sort.Sort(a) + var values []string + for _, attr := range a { + values = append(values, fmt.Sprint(attr)) + } + return fmt.Sprintf("\x1b[%sm", strings.Join(values, ";")) + } +} diff --git a/vendor/github.com/juju/ansiterm/color.go b/vendor/github.com/juju/ansiterm/color.go new file mode 100644 index 000000000..0a97de31e --- /dev/null +++ b/vendor/github.com/juju/ansiterm/color.go @@ -0,0 +1,119 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +const ( + _ Color = iota + Default + Black + Red + Green + Yellow + Blue + Magenta + Cyan + Gray + DarkGray + BrightRed + BrightGreen + BrightYellow + BrightBlue + BrightMagenta + BrightCyan + White +) + +// Color represents one of the standard 16 ANSI colors. +type Color int + +// String returns the name of the color. +func (c Color) String() string { + switch c { + case Default: + return "default" + case Black: + return "black" + case Red: + return "red" + case Green: + return "green" + case Yellow: + return "yellow" + case Blue: + return "blue" + case Magenta: + return "magenta" + case Cyan: + return "cyan" + case Gray: + return "gray" + case DarkGray: + return "darkgray" + case BrightRed: + return "brightred" + case BrightGreen: + return "brightgreen" + case BrightYellow: + return "brightyellow" + case BrightBlue: + return "brightblue" + case BrightMagenta: + return "brightmagenta" + case BrightCyan: + return "brightcyan" + case White: + return "white" + default: + return "" + } +} + +func (c Color) foreground() attribute { + switch c { + case Default: + return 39 + case Black: + return 30 + case Red: + return 31 + case Green: + return 32 + case Yellow: + return 33 + case Blue: + return 34 + case Magenta: + return 35 + case Cyan: + return 36 + case Gray: + return 37 + case DarkGray: + return 90 + case BrightRed: + return 91 + case BrightGreen: + return 92 + case BrightYellow: + return 93 + case BrightBlue: + return 94 + case BrightMagenta: + return 95 + case BrightCyan: + return 96 + case White: + return 97 + default: + return unknownAttribute + } +} + +func (c Color) background() attribute { + value := c.foreground() + if value != unknownAttribute { + return value + 10 + } + return value +} diff --git a/vendor/github.com/juju/ansiterm/context.go b/vendor/github.com/juju/ansiterm/context.go new file mode 100644 index 000000000..e61a867ff --- /dev/null +++ b/vendor/github.com/juju/ansiterm/context.go @@ -0,0 +1,95 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +import ( + "fmt" + "io" +) + +// Context provides a way to specify both foreground and background colors +// along with other styles and write text to a Writer with those colors and +// styles. +type Context struct { + Foreground Color + Background Color + Styles []Style +} + +// Foreground is a convenience function that creates a Context with the +// specified color as the foreground color. +func Foreground(color Color) *Context { + return &Context{Foreground: color} +} + +// Background is a convenience function that creates a Context with the +// specified color as the background color. +func Background(color Color) *Context { + return &Context{Background: color} +} + +// Styles is a convenience function that creates a Context with the +// specified styles set. +func Styles(styles ...Style) *Context { + return &Context{Styles: styles} +} + +// SetForeground sets the foreground to the specified color. +func (c *Context) SetForeground(color Color) *Context { + c.Foreground = color + return c +} + +// SetBackground sets the background to the specified color. +func (c *Context) SetBackground(color Color) *Context { + c.Background = color + return c +} + +// SetStyle replaces the styles with the new values. +func (c *Context) SetStyle(styles ...Style) *Context { + c.Styles = styles + return c +} + +type sgrWriter interface { + io.Writer + writeSGR(value sgr) +} + +// Fprintf will set the sgr values of the writer to the specified +// foreground, background and styles, then write the formatted string, +// then reset the writer. +func (c *Context) Fprintf(w sgrWriter, format string, args ...interface{}) { + w.writeSGR(c) + fmt.Fprintf(w, format, args...) + w.writeSGR(reset) +} + +// Fprint will set the sgr values of the writer to the specified foreground, +// background and styles, then formats using the default formats for its +// operands and writes to w. Spaces are added between operands when neither is +// a string. It returns the number of bytes written and any write error +// encountered. +func (c *Context) Fprint(w sgrWriter, args ...interface{}) { + w.writeSGR(c) + fmt.Fprint(w, args...) + w.writeSGR(reset) +} + +func (c *Context) sgr() string { + var values attributes + if foreground := c.Foreground.foreground(); foreground != unknownAttribute { + values = append(values, foreground) + } + if background := c.Background.background(); background != unknownAttribute { + values = append(values, background) + } + for _, style := range c.Styles { + if value := style.enable(); value != unknownAttribute { + values = append(values, value) + } + } + return values.sgr() +} diff --git a/vendor/github.com/juju/ansiterm/doc.go b/vendor/github.com/juju/ansiterm/doc.go new file mode 100644 index 000000000..782700779 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/doc.go @@ -0,0 +1,6 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +// Package ansiterm provides a Writer that writes out the ANSI escape +// codes for color and styles. +package ansiterm diff --git a/vendor/github.com/juju/ansiterm/style.go b/vendor/github.com/juju/ansiterm/style.go new file mode 100644 index 000000000..0be42da56 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/style.go @@ -0,0 +1,72 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +const ( + _ Style = iota + Bold + Faint + Italic + Underline + Blink + Reverse + Strikethrough + Conceal +) + +type Style int + +func (s Style) String() string { + switch s { + case Bold: + return "bold" + case Faint: + return "faint" + case Italic: + return "italic" + case Underline: + return "underline" + case Blink: + return "blink" + case Reverse: + return "reverse" + case Strikethrough: + return "strikethrough" + case Conceal: + return "conceal" + default: + return "" + } +} + +func (s Style) enable() attribute { + switch s { + case Bold: + return 1 + case Faint: + return 2 + case Italic: + return 3 + case Underline: + return 4 + case Blink: + return 5 + case Reverse: + return 7 + case Conceal: + return 8 + case Strikethrough: + return 9 + default: + return unknownAttribute + } +} + +func (s Style) disable() attribute { + value := s.enable() + if value != unknownAttribute { + return value + 20 + } + return value +} diff --git a/vendor/github.com/juju/ansiterm/tabwriter.go b/vendor/github.com/juju/ansiterm/tabwriter.go new file mode 100644 index 000000000..1ff6faaaf --- /dev/null +++ b/vendor/github.com/juju/ansiterm/tabwriter.go @@ -0,0 +1,64 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +import ( + "io" + + "github.com/juju/ansiterm/tabwriter" +) + +// NewTabWriter returns a writer that is able to set colors and styels. +// The ansi escape codes are stripped for width calculations. +func NewTabWriter(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter { + return new(TabWriter).Init(output, minwidth, tabwidth, padding, padchar, flags) +} + +// TabWriter is a filter that inserts padding around tab-delimited +// columns in its input to align them in the output. +// +// It also setting of colors and styles over and above the standard +// tabwriter package. +type TabWriter struct { + Writer + tw tabwriter.Writer +} + +// Flush should be called after the last call to Write to ensure +// that any data buffered in the Writer is written to output. Any +// incomplete escape sequence at the end is considered +// complete for formatting purposes. +// +func (t *TabWriter) Flush() error { + return t.tw.Flush() +} + +// SetColumnAlignRight will mark a particular column as align right. +// This is reset on the next flush. +func (t *TabWriter) SetColumnAlignRight(column int) { + t.tw.SetColumnAlignRight(column) +} + +// A Writer must be initialized with a call to Init. The first parameter (output) +// specifies the filter output. The remaining parameters control the formatting: +// +// minwidth minimal cell width including any padding +// tabwidth width of tab characters (equivalent number of spaces) +// padding padding added to a cell before computing its width +// padchar ASCII char used for padding +// if padchar == '\t', the Writer will assume that the +// width of a '\t' in the formatted output is tabwidth, +// and cells are left-aligned independent of align_left +// (for correct-looking results, tabwidth must correspond +// to the tab width in the viewer displaying the result) +// flags formatting control +// +func (t *TabWriter) Init(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *TabWriter { + writer, colorCapable := colorEnabledWriter(output) + t.Writer = Writer{ + Writer: t.tw.Init(writer, minwidth, tabwidth, padding, padchar, flags), + noColor: !colorCapable, + } + return t +} diff --git a/vendor/github.com/juju/ansiterm/tabwriter/LICENSE b/vendor/github.com/juju/ansiterm/tabwriter/LICENSE new file mode 100644 index 000000000..744875676 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/tabwriter/LICENSE @@ -0,0 +1,27 @@ +Copyright (c) 2012 The Go Authors. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of Google Inc. nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go b/vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go new file mode 100644 index 000000000..98949d036 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/tabwriter/tabwriter.go @@ -0,0 +1,587 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This file is mostly a copy of the go standard library text/tabwriter. With +// the additional stripping of ansi control characters for width calculations. + +// Package tabwriter implements a write filter (tabwriter.Writer) that +// translates tabbed columns in input into properly aligned text. +// +// The package is using the Elastic Tabstops algorithm described at +// http://nickgravgaard.com/elastictabstops/index.html. +// +package tabwriter + +import ( + "bytes" + "io" + "unicode/utf8" + + "github.com/lunixbochs/vtclean" +) + +// ---------------------------------------------------------------------------- +// Filter implementation + +// A cell represents a segment of text terminated by tabs or line breaks. +// The text itself is stored in a separate buffer; cell only describes the +// segment's size in bytes, its width in runes, and whether it's an htab +// ('\t') terminated cell. +// +type cell struct { + size int // cell size in bytes + width int // cell width in runes + htab bool // true if the cell is terminated by an htab ('\t') +} + +// A Writer is a filter that inserts padding around tab-delimited +// columns in its input to align them in the output. +// +// The Writer treats incoming bytes as UTF-8 encoded text consisting +// of cells terminated by (horizontal or vertical) tabs or line +// breaks (newline or formfeed characters). Cells in adjacent lines +// constitute a column. The Writer inserts padding as needed to +// make all cells in a column have the same width, effectively +// aligning the columns. It assumes that all characters have the +// same width except for tabs for which a tabwidth must be specified. +// Note that cells are tab-terminated, not tab-separated: trailing +// non-tab text at the end of a line does not form a column cell. +// +// The Writer assumes that all Unicode code points have the same width; +// this may not be true in some fonts. +// +// If DiscardEmptyColumns is set, empty columns that are terminated +// entirely by vertical (or "soft") tabs are discarded. Columns +// terminated by horizontal (or "hard") tabs are not affected by +// this flag. +// +// If a Writer is configured to filter HTML, HTML tags and entities +// are passed through. The widths of tags and entities are +// assumed to be zero (tags) and one (entities) for formatting purposes. +// +// A segment of text may be escaped by bracketing it with Escape +// characters. The tabwriter passes escaped text segments through +// unchanged. In particular, it does not interpret any tabs or line +// breaks within the segment. If the StripEscape flag is set, the +// Escape characters are stripped from the output; otherwise they +// are passed through as well. For the purpose of formatting, the +// width of the escaped text is always computed excluding the Escape +// characters. +// +// The formfeed character ('\f') acts like a newline but it also +// terminates all columns in the current line (effectively calling +// Flush). Cells in the next line start new columns. Unless found +// inside an HTML tag or inside an escaped text segment, formfeed +// characters appear as newlines in the output. +// +// The Writer must buffer input internally, because proper spacing +// of one line may depend on the cells in future lines. Clients must +// call Flush when done calling Write. +// +type Writer struct { + // configuration + output io.Writer + minwidth int + tabwidth int + padding int + padbytes [8]byte + flags uint + + // current state + buf bytes.Buffer // collected text excluding tabs or line breaks + pos int // buffer position up to which cell.width of incomplete cell has been computed + cell cell // current incomplete cell; cell.width is up to buf[pos] excluding ignored sections + endChar byte // terminating char of escaped sequence (Escape for escapes, '>', ';' for HTML tags/entities, or 0) + lines [][]cell // list of lines; each line is a list of cells + widths []int // list of column widths in runes - re-used during formatting + alignment map[int]uint // column alignment +} + +func (b *Writer) addLine() { b.lines = append(b.lines, []cell{}) } + +// Reset the current state. +func (b *Writer) reset() { + b.buf.Reset() + b.pos = 0 + b.cell = cell{} + b.endChar = 0 + b.lines = b.lines[0:0] + b.widths = b.widths[0:0] + b.alignment = make(map[int]uint) + b.addLine() +} + +// Internal representation (current state): +// +// - all text written is appended to buf; tabs and line breaks are stripped away +// - at any given time there is a (possibly empty) incomplete cell at the end +// (the cell starts after a tab or line break) +// - cell.size is the number of bytes belonging to the cell so far +// - cell.width is text width in runes of that cell from the start of the cell to +// position pos; html tags and entities are excluded from this width if html +// filtering is enabled +// - the sizes and widths of processed text are kept in the lines list +// which contains a list of cells for each line +// - the widths list is a temporary list with current widths used during +// formatting; it is kept in Writer because it's re-used +// +// |<---------- size ---------->| +// | | +// |<- width ->|<- ignored ->| | +// | | | | +// [---processed---tab------------<tag>...</tag>...] +// ^ ^ ^ +// | | | +// buf start of incomplete cell pos + +// Formatting can be controlled with these flags. +const ( + // Ignore html tags and treat entities (starting with '&' + // and ending in ';') as single characters (width = 1). + FilterHTML uint = 1 << iota + + // Strip Escape characters bracketing escaped text segments + // instead of passing them through unchanged with the text. + StripEscape + + // Force right-alignment of cell content. + // Default is left-alignment. + AlignRight + + // Handle empty columns as if they were not present in + // the input in the first place. + DiscardEmptyColumns + + // Always use tabs for indentation columns (i.e., padding of + // leading empty cells on the left) independent of padchar. + TabIndent + + // Print a vertical bar ('|') between columns (after formatting). + // Discarded columns appear as zero-width columns ("||"). + Debug +) + +// A Writer must be initialized with a call to Init. The first parameter (output) +// specifies the filter output. The remaining parameters control the formatting: +// +// minwidth minimal cell width including any padding +// tabwidth width of tab characters (equivalent number of spaces) +// padding padding added to a cell before computing its width +// padchar ASCII char used for padding +// if padchar == '\t', the Writer will assume that the +// width of a '\t' in the formatted output is tabwidth, +// and cells are left-aligned independent of align_left +// (for correct-looking results, tabwidth must correspond +// to the tab width in the viewer displaying the result) +// flags formatting control +// +func (b *Writer) Init(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *Writer { + if minwidth < 0 || tabwidth < 0 || padding < 0 { + panic("negative minwidth, tabwidth, or padding") + } + b.output = output + b.minwidth = minwidth + b.tabwidth = tabwidth + b.padding = padding + for i := range b.padbytes { + b.padbytes[i] = padchar + } + if padchar == '\t' { + // tab padding enforces left-alignment + flags &^= AlignRight + } + b.flags = flags + + b.reset() + + return b +} + +// debugging support (keep code around) +func (b *Writer) dump() { + pos := 0 + for i, line := range b.lines { + print("(", i, ") ") + for _, c := range line { + print("[", string(b.buf.Bytes()[pos:pos+c.size]), "]") + pos += c.size + } + print("\n") + } + print("\n") +} + +// local error wrapper so we can distinguish errors we want to return +// as errors from genuine panics (which we don't want to return as errors) +type osError struct { + err error +} + +func (b *Writer) write0(buf []byte) { + n, err := b.output.Write(buf) + if n != len(buf) && err == nil { + err = io.ErrShortWrite + } + if err != nil { + panic(osError{err}) + } +} + +func (b *Writer) writeN(src []byte, n int) { + for n > len(src) { + b.write0(src) + n -= len(src) + } + b.write0(src[0:n]) +} + +var ( + newline = []byte{'\n'} + tabs = []byte("\t\t\t\t\t\t\t\t") +) + +func (b *Writer) writePadding(textw, cellw int, useTabs bool) { + if b.padbytes[0] == '\t' || useTabs { + // padding is done with tabs + if b.tabwidth == 0 { + return // tabs have no width - can't do any padding + } + // make cellw the smallest multiple of b.tabwidth + cellw = (cellw + b.tabwidth - 1) / b.tabwidth * b.tabwidth + n := cellw - textw // amount of padding + if n < 0 { + panic("internal error") + } + b.writeN(tabs, (n+b.tabwidth-1)/b.tabwidth) + return + } + + // padding is done with non-tab characters + b.writeN(b.padbytes[0:], cellw-textw) +} + +var vbar = []byte{'|'} + +func (b *Writer) writeLines(pos0 int, line0, line1 int) (pos int) { + pos = pos0 + for i := line0; i < line1; i++ { + line := b.lines[i] + + // if TabIndent is set, use tabs to pad leading empty cells + useTabs := b.flags&TabIndent != 0 + + for j, c := range line { + if j > 0 && b.flags&Debug != 0 { + // indicate column break + b.write0(vbar) + } + + if c.size == 0 { + // empty cell + if j < len(b.widths) { + b.writePadding(c.width, b.widths[j], useTabs) + } + } else { + // non-empty cell + useTabs = false + alignColumnRight := b.alignment[j] == AlignRight + if (b.flags&AlignRight == 0) && !alignColumnRight { // align left + b.write0(b.buf.Bytes()[pos : pos+c.size]) + pos += c.size + if j < len(b.widths) { + b.writePadding(c.width, b.widths[j], false) + } + } else if alignColumnRight && j < len(b.widths) { + // just this column + internalSize := b.widths[j] - b.padding + if j < len(b.widths) { + b.writePadding(c.width, internalSize, false) + } + b.write0(b.buf.Bytes()[pos : pos+c.size]) + if b.padding > 0 { + b.writePadding(0, b.padding, false) + } + pos += c.size + } else { // align right + if j < len(b.widths) { + b.writePadding(c.width, b.widths[j], false) + } + b.write0(b.buf.Bytes()[pos : pos+c.size]) + pos += c.size + } + } + } + + if i+1 == len(b.lines) { + // last buffered line - we don't have a newline, so just write + // any outstanding buffered data + b.write0(b.buf.Bytes()[pos : pos+b.cell.size]) + pos += b.cell.size + } else { + // not the last line - write newline + b.write0(newline) + } + } + return +} + +// Format the text between line0 and line1 (excluding line1); pos +// is the buffer position corresponding to the beginning of line0. +// Returns the buffer position corresponding to the beginning of +// line1 and an error, if any. +// +func (b *Writer) format(pos0 int, line0, line1 int) (pos int) { + pos = pos0 + column := len(b.widths) + for this := line0; this < line1; this++ { + line := b.lines[this] + + if column < len(line)-1 { + // cell exists in this column => this line + // has more cells than the previous line + // (the last cell per line is ignored because cells are + // tab-terminated; the last cell per line describes the + // text before the newline/formfeed and does not belong + // to a column) + + // print unprinted lines until beginning of block + pos = b.writeLines(pos, line0, this) + line0 = this + + // column block begin + width := b.minwidth // minimal column width + discardable := true // true if all cells in this column are empty and "soft" + for ; this < line1; this++ { + line = b.lines[this] + if column < len(line)-1 { + // cell exists in this column + c := line[column] + // update width + if w := c.width + b.padding; w > width { + width = w + } + // update discardable + if c.width > 0 || c.htab { + discardable = false + } + } else { + break + } + } + // column block end + + // discard empty columns if necessary + if discardable && b.flags&DiscardEmptyColumns != 0 { + width = 0 + } + + // format and print all columns to the right of this column + // (we know the widths of this column and all columns to the left) + b.widths = append(b.widths, width) // push width + pos = b.format(pos, line0, this) + b.widths = b.widths[0 : len(b.widths)-1] // pop width + line0 = this + } + } + + // print unprinted lines until end + return b.writeLines(pos, line0, line1) +} + +// Append text to current cell. +func (b *Writer) append(text []byte) { + b.buf.Write(text) + b.cell.size += len(text) +} + +// Update the cell width. +func (b *Writer) updateWidth() { + // ---- Changes here ----- + newChars := b.buf.Bytes()[b.pos:b.buf.Len()] + cleaned := vtclean.Clean(string(newChars), false) // false to strip colors + b.cell.width += utf8.RuneCount([]byte(cleaned)) + // --- end of changes ---- + b.pos = b.buf.Len() +} + +// To escape a text segment, bracket it with Escape characters. +// For instance, the tab in this string "Ignore this tab: \xff\t\xff" +// does not terminate a cell and constitutes a single character of +// width one for formatting purposes. +// +// The value 0xff was chosen because it cannot appear in a valid UTF-8 sequence. +// +const Escape = '\xff' + +// Start escaped mode. +func (b *Writer) startEscape(ch byte) { + switch ch { + case Escape: + b.endChar = Escape + case '<': + b.endChar = '>' + case '&': + b.endChar = ';' + } +} + +// Terminate escaped mode. If the escaped text was an HTML tag, its width +// is assumed to be zero for formatting purposes; if it was an HTML entity, +// its width is assumed to be one. In all other cases, the width is the +// unicode width of the text. +// +func (b *Writer) endEscape() { + switch b.endChar { + case Escape: + b.updateWidth() + if b.flags&StripEscape == 0 { + b.cell.width -= 2 // don't count the Escape chars + } + case '>': // tag of zero width + case ';': + b.cell.width++ // entity, count as one rune + } + b.pos = b.buf.Len() + b.endChar = 0 +} + +// Terminate the current cell by adding it to the list of cells of the +// current line. Returns the number of cells in that line. +// +func (b *Writer) terminateCell(htab bool) int { + b.cell.htab = htab + line := &b.lines[len(b.lines)-1] + *line = append(*line, b.cell) + b.cell = cell{} + return len(*line) +} + +func handlePanic(err *error, op string) { + if e := recover(); e != nil { + if nerr, ok := e.(osError); ok { + *err = nerr.err + return + } + panic("tabwriter: panic during " + op) + } +} + +// Flush should be called after the last call to Write to ensure +// that any data buffered in the Writer is written to output. Any +// incomplete escape sequence at the end is considered +// complete for formatting purposes. +// +func (b *Writer) Flush() (err error) { + defer b.reset() // even in the presence of errors + defer handlePanic(&err, "Flush") + + // add current cell if not empty + if b.cell.size > 0 { + if b.endChar != 0 { + // inside escape - terminate it even if incomplete + b.endEscape() + } + b.terminateCell(false) + } + + // format contents of buffer + b.format(0, 0, len(b.lines)) + + return +} + +var hbar = []byte("---\n") + +// SetColumnAlignRight will mark a particular column as align right. +// This is reset on the next flush. +func (b *Writer) SetColumnAlignRight(column int) { + b.alignment[column] = AlignRight +} + +// Write writes buf to the writer b. +// The only errors returned are ones encountered +// while writing to the underlying output stream. +// +func (b *Writer) Write(buf []byte) (n int, err error) { + defer handlePanic(&err, "Write") + + // split text into cells + n = 0 + for i, ch := range buf { + if b.endChar == 0 { + // outside escape + switch ch { + case '\t', '\v', '\n', '\f': + // end of cell + b.append(buf[n:i]) + b.updateWidth() + n = i + 1 // ch consumed + ncells := b.terminateCell(ch == '\t') + if ch == '\n' || ch == '\f' { + // terminate line + b.addLine() + if ch == '\f' || ncells == 1 { + // A '\f' always forces a flush. Otherwise, if the previous + // line has only one cell which does not have an impact on + // the formatting of the following lines (the last cell per + // line is ignored by format()), thus we can flush the + // Writer contents. + if err = b.Flush(); err != nil { + return + } + if ch == '\f' && b.flags&Debug != 0 { + // indicate section break + b.write0(hbar) + } + } + } + + case Escape: + // start of escaped sequence + b.append(buf[n:i]) + b.updateWidth() + n = i + if b.flags&StripEscape != 0 { + n++ // strip Escape + } + b.startEscape(Escape) + + case '<', '&': + // possibly an html tag/entity + if b.flags&FilterHTML != 0 { + // begin of tag/entity + b.append(buf[n:i]) + b.updateWidth() + n = i + b.startEscape(ch) + } + } + + } else { + // inside escape + if ch == b.endChar { + // end of tag/entity + j := i + 1 + if ch == Escape && b.flags&StripEscape != 0 { + j = i // strip Escape + } + b.append(buf[n:j]) + n = i + 1 // ch consumed + b.endEscape() + } + } + } + + // append leftover text + b.append(buf[n:]) + n = len(buf) + return +} + +// NewWriter allocates and initializes a new tabwriter.Writer. +// The parameters are the same as for the Init function. +// +func NewWriter(output io.Writer, minwidth, tabwidth, padding int, padchar byte, flags uint) *Writer { + return new(Writer).Init(output, minwidth, tabwidth, padding, padchar, flags) +} diff --git a/vendor/github.com/juju/ansiterm/terminal.go b/vendor/github.com/juju/ansiterm/terminal.go new file mode 100644 index 000000000..96fd11c51 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/terminal.go @@ -0,0 +1,32 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +import ( + "io" + "os" + + "github.com/mattn/go-colorable" + "github.com/mattn/go-isatty" +) + +// colorEnabledWriter returns a writer that can handle the ansi color codes +// and true if the writer passed in is a terminal capable of color. If the +// TERM environment variable is set to "dumb", the terminal is not considered +// color capable. +func colorEnabledWriter(w io.Writer) (io.Writer, bool) { + f, ok := w.(*os.File) + if !ok { + return w, false + } + // Check the TERM environment variable specifically + // to check for "dumb" terminals. + if os.Getenv("TERM") == "dumb" { + return w, false + } + if !isatty.IsTerminal(f.Fd()) { + return w, false + } + return colorable.NewColorable(f), true +} diff --git a/vendor/github.com/juju/ansiterm/writer.go b/vendor/github.com/juju/ansiterm/writer.go new file mode 100644 index 000000000..32437bb27 --- /dev/null +++ b/vendor/github.com/juju/ansiterm/writer.go @@ -0,0 +1,74 @@ +// Copyright 2016 Canonical Ltd. +// Licensed under the LGPLv3, see LICENCE file for details. + +package ansiterm + +import ( + "fmt" + "io" +) + +// Writer allows colors and styles to be specified. If the io.Writer +// is not a terminal capable of color, all attempts to set colors or +// styles are no-ops. +type Writer struct { + io.Writer + + noColor bool +} + +// NewWriter returns a Writer that allows the caller to specify colors and +// styles. If the io.Writer is not a terminal capable of color, all attempts +// to set colors or styles are no-ops. +func NewWriter(w io.Writer) *Writer { + writer, colorCapable := colorEnabledWriter(w) + return &Writer{ + Writer: writer, + noColor: !colorCapable, + } +} + +// SetColorCapable forces the writer to either write the ANSI escape color +// if capable is true, or to not write them if capable is false. +func (w *Writer) SetColorCapable(capable bool) { + w.noColor = !capable +} + +// SetForeground sets the foreground color. +func (w *Writer) SetForeground(c Color) { + w.writeSGR(c.foreground()) +} + +// SetBackground sets the background color. +func (w *Writer) SetBackground(c Color) { + w.writeSGR(c.background()) +} + +// SetStyle sets the text style. +func (w *Writer) SetStyle(s Style) { + w.writeSGR(s.enable()) +} + +// ClearStyle clears the text style. +func (w *Writer) ClearStyle(s Style) { + w.writeSGR(s.disable()) +} + +// Reset returns the default foreground and background colors with no styles. +func (w *Writer) Reset() { + w.writeSGR(reset) +} + +type sgr interface { + // sgr returns the combined escape sequence for the Select Graphic Rendition. + sgr() string +} + +// writeSGR takes the appropriate integer SGR parameters +// and writes out the ANIS escape code. +func (w *Writer) writeSGR(value sgr) { + if w.noColor { + return + } + fmt.Fprint(w, value.sgr()) +} |