diff options
Diffstat (limited to 'vendor/google.golang.org/grpc/internal')
46 files changed, 10659 insertions, 11 deletions
diff --git a/vendor/google.golang.org/grpc/internal/backoff/backoff.go b/vendor/google.golang.org/grpc/internal/backoff/backoff.go new file mode 100644 index 000000000..5fc0ee3da --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/backoff/backoff.go @@ -0,0 +1,73 @@ +/* + * + * Copyright 2017 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package backoff implement the backoff strategy for gRPC. +// +// This is kept in internal until the gRPC project decides whether or not to +// allow alternative backoff strategies. +package backoff + +import ( + "time" + + grpcbackoff "google.golang.org/grpc/backoff" + "google.golang.org/grpc/internal/grpcrand" +) + +// Strategy defines the methodology for backing off after a grpc connection +// failure. +type Strategy interface { + // Backoff returns the amount of time to wait before the next retry given + // the number of consecutive failures. + Backoff(retries int) time.Duration +} + +// DefaultExponential is an exponential backoff implementation using the +// default values for all the configurable knobs defined in +// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md. +var DefaultExponential = Exponential{Config: grpcbackoff.DefaultConfig} + +// Exponential implements exponential backoff algorithm as defined in +// https://github.com/grpc/grpc/blob/master/doc/connection-backoff.md. +type Exponential struct { + // Config contains all options to configure the backoff algorithm. + Config grpcbackoff.Config +} + +// Backoff returns the amount of time to wait before the next retry given the +// number of retries. +func (bc Exponential) Backoff(retries int) time.Duration { + if retries == 0 { + return bc.Config.BaseDelay + } + backoff, max := float64(bc.Config.BaseDelay), float64(bc.Config.MaxDelay) + for backoff < max && retries > 0 { + backoff *= bc.Config.Multiplier + retries-- + } + if backoff > max { + backoff = max + } + // Randomize backoff delays so that if a cluster of requests start at + // the same time, they won't operate in lockstep. + backoff *= 1 + bc.Config.Jitter*(grpcrand.Float64()*2-1) + if backoff < 0 { + return 0 + } + return time.Duration(backoff) +} diff --git a/vendor/google.golang.org/grpc/internal/balancerload/load.go b/vendor/google.golang.org/grpc/internal/balancerload/load.go new file mode 100644 index 000000000..3a905d966 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/balancerload/load.go @@ -0,0 +1,46 @@ +/* + * Copyright 2019 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +// Package balancerload defines APIs to parse server loads in trailers. The +// parsed loads are sent to balancers in DoneInfo. +package balancerload + +import ( + "google.golang.org/grpc/metadata" +) + +// Parser converts loads from metadata into a concrete type. +type Parser interface { + // Parse parses loads from metadata. + Parse(md metadata.MD) interface{} +} + +var parser Parser + +// SetParser sets the load parser. +// +// Not mutex-protected, should be called before any gRPC functions. +func SetParser(lr Parser) { + parser = lr +} + +// Parse calls parser.Read(). +func Parse(md metadata.MD) interface{} { + if parser == nil { + return nil + } + return parser.Parse(md) +} diff --git a/vendor/google.golang.org/grpc/internal/binarylog/binarylog.go b/vendor/google.golang.org/grpc/internal/binarylog/binarylog.go new file mode 100644 index 000000000..5cc3aeddb --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/binarylog/binarylog.go @@ -0,0 +1,170 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package binarylog implementation binary logging as defined in +// https://github.com/grpc/proposal/blob/master/A16-binary-logging.md. +package binarylog + +import ( + "fmt" + "os" + + "google.golang.org/grpc/grpclog" + "google.golang.org/grpc/internal/grpcutil" +) + +// Logger is the global binary logger. It can be used to get binary logger for +// each method. +type Logger interface { + getMethodLogger(methodName string) *MethodLogger +} + +// binLogger is the global binary logger for the binary. One of this should be +// built at init time from the configuration (environment variable or flags). +// +// It is used to get a methodLogger for each individual method. +var binLogger Logger + +var grpclogLogger = grpclog.Component("binarylog") + +// SetLogger sets the binarg logger. +// +// Only call this at init time. +func SetLogger(l Logger) { + binLogger = l +} + +// GetMethodLogger returns the methodLogger for the given methodName. +// +// methodName should be in the format of "/service/method". +// +// Each methodLogger returned by this method is a new instance. This is to +// generate sequence id within the call. +func GetMethodLogger(methodName string) *MethodLogger { + if binLogger == nil { + return nil + } + return binLogger.getMethodLogger(methodName) +} + +func init() { + const envStr = "GRPC_BINARY_LOG_FILTER" + configStr := os.Getenv(envStr) + binLogger = NewLoggerFromConfigString(configStr) +} + +type methodLoggerConfig struct { + // Max length of header and message. + hdr, msg uint64 +} + +type logger struct { + all *methodLoggerConfig + services map[string]*methodLoggerConfig + methods map[string]*methodLoggerConfig + + blacklist map[string]struct{} +} + +// newEmptyLogger creates an empty logger. The map fields need to be filled in +// using the set* functions. +func newEmptyLogger() *logger { + return &logger{} +} + +// Set method logger for "*". +func (l *logger) setDefaultMethodLogger(ml *methodLoggerConfig) error { + if l.all != nil { + return fmt.Errorf("conflicting global rules found") + } + l.all = ml + return nil +} + +// Set method logger for "service/*". +// +// New methodLogger with same service overrides the old one. +func (l *logger) setServiceMethodLogger(service string, ml *methodLoggerConfig) error { + if _, ok := l.services[service]; ok { + return fmt.Errorf("conflicting service rules for service %v found", service) + } + if l.services == nil { + l.services = make(map[string]*methodLoggerConfig) + } + l.services[service] = ml + return nil +} + +// Set method logger for "service/method". +// +// New methodLogger with same method overrides the old one. +func (l *logger) setMethodMethodLogger(method string, ml *methodLoggerConfig) error { + if _, ok := l.blacklist[method]; ok { + return fmt.Errorf("conflicting blacklist rules for method %v found", method) + } + if _, ok := l.methods[method]; ok { + return fmt.Errorf("conflicting method rules for method %v found", method) + } + if l.methods == nil { + l.methods = make(map[string]*methodLoggerConfig) + } + l.methods[method] = ml + return nil +} + +// Set blacklist method for "-service/method". +func (l *logger) setBlacklist(method string) error { + if _, ok := l.blacklist[method]; ok { + return fmt.Errorf("conflicting blacklist rules for method %v found", method) + } + if _, ok := l.methods[method]; ok { + return fmt.Errorf("conflicting method rules for method %v found", method) + } + if l.blacklist == nil { + l.blacklist = make(map[string]struct{}) + } + l.blacklist[method] = struct{}{} + return nil +} + +// getMethodLogger returns the methodLogger for the given methodName. +// +// methodName should be in the format of "/service/method". +// +// Each methodLogger returned by this method is a new instance. This is to +// generate sequence id within the call. +func (l *logger) getMethodLogger(methodName string) *MethodLogger { + s, m, err := grpcutil.ParseMethod(methodName) + if err != nil { + grpclogLogger.Infof("binarylogging: failed to parse %q: %v", methodName, err) + return nil + } + if ml, ok := l.methods[s+"/"+m]; ok { + return newMethodLogger(ml.hdr, ml.msg) + } + if _, ok := l.blacklist[s+"/"+m]; ok { + return nil + } + if ml, ok := l.services[s]; ok { + return newMethodLogger(ml.hdr, ml.msg) + } + if l.all == nil { + return nil + } + return newMethodLogger(l.all.hdr, l.all.msg) +} diff --git a/vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go b/vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go new file mode 100644 index 000000000..1ee00a39a --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/binarylog/binarylog_testutil.go @@ -0,0 +1,42 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// This file contains exported variables/functions that are exported for testing +// only. +// +// An ideal way for this would be to put those in a *_test.go but in binarylog +// package. But this doesn't work with staticcheck with go module. Error was: +// "MdToMetadataProto not declared by package binarylog". This could be caused +// by the way staticcheck looks for files for a certain package, which doesn't +// support *_test.go files. +// +// Move those to binary_test.go when staticcheck is fixed. + +package binarylog + +var ( + // AllLogger is a logger that logs all headers/messages for all RPCs. It's + // for testing only. + AllLogger = NewLoggerFromConfigString("*") + // MdToMetadataProto converts metadata to a binary logging proto message. + // It's for testing only. + MdToMetadataProto = mdToMetadataProto + // AddrToProto converts an address to a binary logging proto message. It's + // for testing only. + AddrToProto = addrToProto +) diff --git a/vendor/google.golang.org/grpc/internal/binarylog/env_config.go b/vendor/google.golang.org/grpc/internal/binarylog/env_config.go new file mode 100644 index 000000000..d8f4e7602 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/binarylog/env_config.go @@ -0,0 +1,208 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package binarylog + +import ( + "errors" + "fmt" + "regexp" + "strconv" + "strings" +) + +// NewLoggerFromConfigString reads the string and build a logger. It can be used +// to build a new logger and assign it to binarylog.Logger. +// +// Example filter config strings: +// - "" Nothing will be logged +// - "*" All headers and messages will be fully logged. +// - "*{h}" Only headers will be logged. +// - "*{m:256}" Only the first 256 bytes of each message will be logged. +// - "Foo/*" Logs every method in service Foo +// - "Foo/*,-Foo/Bar" Logs every method in service Foo except method /Foo/Bar +// - "Foo/*,Foo/Bar{m:256}" Logs the first 256 bytes of each message in method +// /Foo/Bar, logs all headers and messages in every other method in service +// Foo. +// +// If two configs exist for one certain method or service, the one specified +// later overrides the previous config. +func NewLoggerFromConfigString(s string) Logger { + if s == "" { + return nil + } + l := newEmptyLogger() + methods := strings.Split(s, ",") + for _, method := range methods { + if err := l.fillMethodLoggerWithConfigString(method); err != nil { + grpclogLogger.Warningf("failed to parse binary log config: %v", err) + return nil + } + } + return l +} + +// fillMethodLoggerWithConfigString parses config, creates methodLogger and adds +// it to the right map in the logger. +func (l *logger) fillMethodLoggerWithConfigString(config string) error { + // "" is invalid. + if config == "" { + return errors.New("empty string is not a valid method binary logging config") + } + + // "-service/method", blacklist, no * or {} allowed. + if config[0] == '-' { + s, m, suffix, err := parseMethodConfigAndSuffix(config[1:]) + if err != nil { + return fmt.Errorf("invalid config: %q, %v", config, err) + } + if m == "*" { + return fmt.Errorf("invalid config: %q, %v", config, "* not allowed in blacklist config") + } + if suffix != "" { + return fmt.Errorf("invalid config: %q, %v", config, "header/message limit not allowed in blacklist config") + } + if err := l.setBlacklist(s + "/" + m); err != nil { + return fmt.Errorf("invalid config: %v", err) + } + return nil + } + + // "*{h:256;m:256}" + if config[0] == '*' { + hdr, msg, err := parseHeaderMessageLengthConfig(config[1:]) + if err != nil { + return fmt.Errorf("invalid config: %q, %v", config, err) + } + if err := l.setDefaultMethodLogger(&methodLoggerConfig{hdr: hdr, msg: msg}); err != nil { + return fmt.Errorf("invalid config: %v", err) + } + return nil + } + + s, m, suffix, err := parseMethodConfigAndSuffix(config) + if err != nil { + return fmt.Errorf("invalid config: %q, %v", config, err) + } + hdr, msg, err := parseHeaderMessageLengthConfig(suffix) + if err != nil { + return fmt.Errorf("invalid header/message length config: %q, %v", suffix, err) + } + if m == "*" { + if err := l.setServiceMethodLogger(s, &methodLoggerConfig{hdr: hdr, msg: msg}); err != nil { + return fmt.Errorf("invalid config: %v", err) + } + } else { + if err := l.setMethodMethodLogger(s+"/"+m, &methodLoggerConfig{hdr: hdr, msg: msg}); err != nil { + return fmt.Errorf("invalid config: %v", err) + } + } + return nil +} + +const ( + // TODO: this const is only used by env_config now. But could be useful for + // other config. Move to binarylog.go if necessary. + maxUInt = ^uint64(0) + + // For "p.s/m" plus any suffix. Suffix will be parsed again. See test for + // expected output. + longMethodConfigRegexpStr = `^([\w./]+)/((?:\w+)|[*])(.+)?$` + + // For suffix from above, "{h:123,m:123}". See test for expected output. + optionalLengthRegexpStr = `(?::(\d+))?` // Optional ":123". + headerConfigRegexpStr = `^{h` + optionalLengthRegexpStr + `}$` + messageConfigRegexpStr = `^{m` + optionalLengthRegexpStr + `}$` + headerMessageConfigRegexpStr = `^{h` + optionalLengthRegexpStr + `;m` + optionalLengthRegexpStr + `}$` +) + +var ( + longMethodConfigRegexp = regexp.MustCompile(longMethodConfigRegexpStr) + headerConfigRegexp = regexp.MustCompile(headerConfigRegexpStr) + messageConfigRegexp = regexp.MustCompile(messageConfigRegexpStr) + headerMessageConfigRegexp = regexp.MustCompile(headerMessageConfigRegexpStr) +) + +// Turn "service/method{h;m}" into "service", "method", "{h;m}". +func parseMethodConfigAndSuffix(c string) (service, method, suffix string, _ error) { + // Regexp result: + // + // in: "p.s/m{h:123,m:123}", + // out: []string{"p.s/m{h:123,m:123}", "p.s", "m", "{h:123,m:123}"}, + match := longMethodConfigRegexp.FindStringSubmatch(c) + if match == nil { + return "", "", "", fmt.Errorf("%q contains invalid substring", c) + } + service = match[1] + method = match[2] + suffix = match[3] + return +} + +// Turn "{h:123;m:345}" into 123, 345. +// +// Return maxUInt if length is unspecified. +func parseHeaderMessageLengthConfig(c string) (hdrLenStr, msgLenStr uint64, err error) { + if c == "" { + return maxUInt, maxUInt, nil + } + // Header config only. + if match := headerConfigRegexp.FindStringSubmatch(c); match != nil { + if s := match[1]; s != "" { + hdrLenStr, err = strconv.ParseUint(s, 10, 64) + if err != nil { + return 0, 0, fmt.Errorf("failed to convert %q to uint", s) + } + return hdrLenStr, 0, nil + } + return maxUInt, 0, nil + } + + // Message config only. + if match := messageConfigRegexp.FindStringSubmatch(c); match != nil { + if s := match[1]; s != "" { + msgLenStr, err = strconv.ParseUint(s, 10, 64) + if err != nil { + return 0, 0, fmt.Errorf("failed to convert %q to uint", s) + } + return 0, msgLenStr, nil + } + return 0, maxUInt, nil + } + + // Header and message config both. + if match := headerMessageConfigRegexp.FindStringSubmatch(c); match != nil { + // Both hdr and msg are specified, but one or two of them might be empty. + hdrLenStr = maxUInt + msgLenStr = maxUInt + if s := match[1]; s != "" { + hdrLenStr, err = strconv.ParseUint(s, 10, 64) + if err != nil { + return 0, 0, fmt.Errorf("failed to convert %q to uint", s) + } + } + if s := match[2]; s != "" { + msgLenStr, err = strconv.ParseUint(s, 10, 64) + if err != nil { + return 0, 0, fmt.Errorf("failed to convert %q to uint", s) + } + } + return hdrLenStr, msgLenStr, nil + } + return 0, 0, fmt.Errorf("%q contains invalid substring", c) +} diff --git a/vendor/google.golang.org/grpc/internal/binarylog/method_logger.go b/vendor/google.golang.org/grpc/internal/binarylog/method_logger.go new file mode 100644 index 000000000..0cdb41831 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/binarylog/method_logger.go @@ -0,0 +1,422 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package binarylog + +import ( + "net" + "strings" + "sync/atomic" + "time" + + "github.com/golang/protobuf/proto" + "github.com/golang/protobuf/ptypes" + pb "google.golang.org/grpc/binarylog/grpc_binarylog_v1" + "google.golang.org/grpc/metadata" + "google.golang.org/grpc/status" +) + +type callIDGenerator struct { + id uint64 +} + +func (g *callIDGenerator) next() uint64 { + id := atomic.AddUint64(&g.id, 1) + return id +} + +// reset is for testing only, and doesn't need to be thread safe. +func (g *callIDGenerator) reset() { + g.id = 0 +} + +var idGen callIDGenerator + +// MethodLogger is the sub-logger for each method. +type MethodLogger struct { + headerMaxLen, messageMaxLen uint64 + + callID uint64 + idWithinCallGen *callIDGenerator + + sink Sink // TODO(blog): make this plugable. +} + +func newMethodLogger(h, m uint64) *MethodLogger { + return &MethodLogger{ + headerMaxLen: h, + messageMaxLen: m, + + callID: idGen.next(), + idWithinCallGen: &callIDGenerator{}, + + sink: DefaultSink, // TODO(blog): make it plugable. + } +} + +// Log creates a proto binary log entry, and logs it to the sink. +func (ml *MethodLogger) Log(c LogEntryConfig) { + m := c.toProto() + timestamp, _ := ptypes.TimestampProto(time.Now()) + m.Timestamp = timestamp + m.CallId = ml.callID + m.SequenceIdWithinCall = ml.idWithinCallGen.next() + + switch pay := m.Payload.(type) { + case *pb.GrpcLogEntry_ClientHeader: + m.PayloadTruncated = ml.truncateMetadata(pay.ClientHeader.GetMetadata()) + case *pb.GrpcLogEntry_ServerHeader: + m.PayloadTruncated = ml.truncateMetadata(pay.ServerHeader.GetMetadata()) + case *pb.GrpcLogEntry_Message: + m.PayloadTruncated = ml.truncateMessage(pay.Message) + } + + ml.sink.Write(m) +} + +func (ml *MethodLogger) truncateMetadata(mdPb *pb.Metadata) (truncated bool) { + if ml.headerMaxLen == maxUInt { + return false + } + var ( + bytesLimit = ml.headerMaxLen + index int + ) + // At the end of the loop, index will be the first entry where the total + // size is greater than the limit: + // + // len(entry[:index]) <= ml.hdr && len(entry[:index+1]) > ml.hdr. + for ; index < len(mdPb.Entry); index++ { + entry := mdPb.Entry[index] + if entry.Key == "grpc-trace-bin" { + // "grpc-trace-bin" is a special key. It's kept in the log entry, + // but not counted towards the size limit. + continue + } + currentEntryLen := uint64(len(entry.Value)) + if currentEntryLen > bytesLimit { + break + } + bytesLimit -= currentEntryLen + } + truncated = index < len(mdPb.Entry) + mdPb.Entry = mdPb.Entry[:index] + return truncated +} + +func (ml *MethodLogger) truncateMessage(msgPb *pb.Message) (truncated bool) { + if ml.messageMaxLen == maxUInt { + return false + } + if ml.messageMaxLen >= uint64(len(msgPb.Data)) { + return false + } + msgPb.Data = msgPb.Data[:ml.messageMaxLen] + return true +} + +// LogEntryConfig represents the configuration for binary log entry. +type LogEntryConfig interface { + toProto() *pb.GrpcLogEntry +} + +// ClientHeader configs the binary log entry to be a ClientHeader entry. +type ClientHeader struct { + OnClientSide bool + Header metadata.MD + MethodName string + Authority string + Timeout time.Duration + // PeerAddr is required only when it's on server side. + PeerAddr net.Addr +} + +func (c *ClientHeader) toProto() *pb.GrpcLogEntry { + // This function doesn't need to set all the fields (e.g. seq ID). The Log + // function will set the fields when necessary. + clientHeader := &pb.ClientHeader{ + Metadata: mdToMetadataProto(c.Header), + MethodName: c.MethodName, + Authority: c.Authority, + } + if c.Timeout > 0 { + clientHeader.Timeout = ptypes.DurationProto(c.Timeout) + } + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_HEADER, + Payload: &pb.GrpcLogEntry_ClientHeader{ + ClientHeader: clientHeader, + }, + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + if c.PeerAddr != nil { + ret.Peer = addrToProto(c.PeerAddr) + } + return ret +} + +// ServerHeader configs the binary log entry to be a ServerHeader entry. +type ServerHeader struct { + OnClientSide bool + Header metadata.MD + // PeerAddr is required only when it's on client side. + PeerAddr net.Addr +} + +func (c *ServerHeader) toProto() *pb.GrpcLogEntry { + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_HEADER, + Payload: &pb.GrpcLogEntry_ServerHeader{ + ServerHeader: &pb.ServerHeader{ + Metadata: mdToMetadataProto(c.Header), + }, + }, + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + if c.PeerAddr != nil { + ret.Peer = addrToProto(c.PeerAddr) + } + return ret +} + +// ClientMessage configs the binary log entry to be a ClientMessage entry. +type ClientMessage struct { + OnClientSide bool + // Message can be a proto.Message or []byte. Other messages formats are not + // supported. + Message interface{} +} + +func (c *ClientMessage) toProto() *pb.GrpcLogEntry { + var ( + data []byte + err error + ) + if m, ok := c.Message.(proto.Message); ok { + data, err = proto.Marshal(m) + if err != nil { + grpclogLogger.Infof("binarylogging: failed to marshal proto message: %v", err) + } + } else if b, ok := c.Message.([]byte); ok { + data = b + } else { + grpclogLogger.Infof("binarylogging: message to log is neither proto.message nor []byte") + } + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_MESSAGE, + Payload: &pb.GrpcLogEntry_Message{ + Message: &pb.Message{ + Length: uint32(len(data)), + Data: data, + }, + }, + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + return ret +} + +// ServerMessage configs the binary log entry to be a ServerMessage entry. +type ServerMessage struct { + OnClientSide bool + // Message can be a proto.Message or []byte. Other messages formats are not + // supported. + Message interface{} +} + +func (c *ServerMessage) toProto() *pb.GrpcLogEntry { + var ( + data []byte + err error + ) + if m, ok := c.Message.(proto.Message); ok { + data, err = proto.Marshal(m) + if err != nil { + grpclogLogger.Infof("binarylogging: failed to marshal proto message: %v", err) + } + } else if b, ok := c.Message.([]byte); ok { + data = b + } else { + grpclogLogger.Infof("binarylogging: message to log is neither proto.message nor []byte") + } + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_MESSAGE, + Payload: &pb.GrpcLogEntry_Message{ + Message: &pb.Message{ + Length: uint32(len(data)), + Data: data, + }, + }, + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + return ret +} + +// ClientHalfClose configs the binary log entry to be a ClientHalfClose entry. +type ClientHalfClose struct { + OnClientSide bool +} + +func (c *ClientHalfClose) toProto() *pb.GrpcLogEntry { + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_CLIENT_HALF_CLOSE, + Payload: nil, // No payload here. + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + return ret +} + +// ServerTrailer configs the binary log entry to be a ServerTrailer entry. +type ServerTrailer struct { + OnClientSide bool + Trailer metadata.MD + // Err is the status error. + Err error + // PeerAddr is required only when it's on client side and the RPC is trailer + // only. + PeerAddr net.Addr +} + +func (c *ServerTrailer) toProto() *pb.GrpcLogEntry { + st, ok := status.FromError(c.Err) + if !ok { + grpclogLogger.Info("binarylogging: error in trailer is not a status error") + } + var ( + detailsBytes []byte + err error + ) + stProto := st.Proto() + if stProto != nil && len(stProto.Details) != 0 { + detailsBytes, err = proto.Marshal(stProto) + if err != nil { + grpclogLogger.Infof("binarylogging: failed to marshal status proto: %v", err) + } + } + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_SERVER_TRAILER, + Payload: &pb.GrpcLogEntry_Trailer{ + Trailer: &pb.Trailer{ + Metadata: mdToMetadataProto(c.Trailer), + StatusCode: uint32(st.Code()), + StatusMessage: st.Message(), + StatusDetails: detailsBytes, + }, + }, + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + if c.PeerAddr != nil { + ret.Peer = addrToProto(c.PeerAddr) + } + return ret +} + +// Cancel configs the binary log entry to be a Cancel entry. +type Cancel struct { + OnClientSide bool +} + +func (c *Cancel) toProto() *pb.GrpcLogEntry { + ret := &pb.GrpcLogEntry{ + Type: pb.GrpcLogEntry_EVENT_TYPE_CANCEL, + Payload: nil, + } + if c.OnClientSide { + ret.Logger = pb.GrpcLogEntry_LOGGER_CLIENT + } else { + ret.Logger = pb.GrpcLogEntry_LOGGER_SERVER + } + return ret +} + +// metadataKeyOmit returns whether the metadata entry with this key should be +// omitted. +func metadataKeyOmit(key string) bool { + switch key { + case "lb-token", ":path", ":authority", "content-encoding", "content-type", "user-agent", "te": + return true + case "grpc-trace-bin": // grpc-trace-bin is special because it's visiable to users. + return false + } + return strings.HasPrefix(key, "grpc-") +} + +func mdToMetadataProto(md metadata.MD) *pb.Metadata { + ret := &pb.Metadata{} + for k, vv := range md { + if metadataKeyOmit(k) { + continue + } + for _, v := range vv { + ret.Entry = append(ret.Entry, + &pb.MetadataEntry{ + Key: k, + Value: []byte(v), + }, + ) + } + } + return ret +} + +func addrToProto(addr net.Addr) *pb.Address { + ret := &pb.Address{} + switch a := addr.(type) { + case *net.TCPAddr: + if a.IP.To4() != nil { + ret.Type = pb.Address_TYPE_IPV4 + } else if a.IP.To16() != nil { + ret.Type = pb.Address_TYPE_IPV6 + } else { + ret.Type = pb.Address_TYPE_UNKNOWN + // Do not set address and port fields. + break + } + ret.Address = a.IP.String() + ret.IpPort = uint32(a.Port) + case *net.UnixAddr: + ret.Type = pb.Address_TYPE_UNIX + ret.Address = a.String() + default: + ret.Type = pb.Address_TYPE_UNKNOWN + } + return ret +} diff --git a/vendor/google.golang.org/grpc/internal/binarylog/sink.go b/vendor/google.golang.org/grpc/internal/binarylog/sink.go new file mode 100644 index 000000000..7d7a3056b --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/binarylog/sink.go @@ -0,0 +1,159 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package binarylog + +import ( + "bufio" + "encoding/binary" + "io" + "sync" + "time" + + "github.com/golang/protobuf/proto" + pb "google.golang.org/grpc/binarylog/grpc_binarylog_v1" +) + +var ( + // DefaultSink is the sink where the logs will be written to. It's exported + // for the binarylog package to update. + DefaultSink Sink = &noopSink{} // TODO(blog): change this default (file in /tmp). +) + +// Sink writes log entry into the binary log sink. +// +// sink is a copy of the exported binarylog.Sink, to avoid circular dependency. +type Sink interface { + // Write will be called to write the log entry into the sink. + // + // It should be thread-safe so it can be called in parallel. + Write(*pb.GrpcLogEntry) error + // Close will be called when the Sink is replaced by a new Sink. + Close() error +} + +type noopSink struct{} + +func (ns *noopSink) Write(*pb.GrpcLogEntry) error { return nil } +func (ns *noopSink) Close() error { return nil } + +// newWriterSink creates a binary log sink with the given writer. +// +// Write() marshals the proto message and writes it to the given writer. Each +// message is prefixed with a 4 byte big endian unsigned integer as the length. +// +// No buffer is done, Close() doesn't try to close the writer. +func newWriterSink(w io.Writer) Sink { + return &writerSink{out: w} +} + +type writerSink struct { + out io.Writer +} + +func (ws *writerSink) Write(e *pb.GrpcLogEntry) error { + b, err := proto.Marshal(e) + if err != nil { + grpclogLogger.Infof("binary logging: failed to marshal proto message: %v", err) + } + hdr := make([]byte, 4) + binary.BigEndian.PutUint32(hdr, uint32(len(b))) + if _, err := ws.out.Write(hdr); err != nil { + return err + } + if _, err := ws.out.Write(b); err != nil { + return err + } + return nil +} + +func (ws *writerSink) Close() error { return nil } + +type bufferedSink struct { + mu sync.Mutex + closer io.Closer + out Sink // out is built on buf. + buf *bufio.Writer // buf is kept for flush. + + writeStartOnce sync.Once + writeTicker *time.Ticker +} + +func (fs *bufferedSink) Write(e *pb.GrpcLogEntry) error { + // Start the write loop when Write is called. + fs.writeStartOnce.Do(fs.startFlushGoroutine) + fs.mu.Lock() + if err := fs.out.Write(e); err != nil { + fs.mu.Unlock() + return err + } + fs.mu.Unlock() + return nil +} + +const ( + bufFlushDuration = 60 * time.Second +) + +func (fs *bufferedSink) startFlushGoroutine() { + fs.writeTicker = time.NewTicker(bufFlushDuration) + go func() { + for range fs.writeTicker.C { + fs.mu.Lock() + if err := fs.buf.Flush(); err != nil { + grpclogLogger.Warningf("failed to flush to Sink: %v", err) + } + fs.mu.Unlock() + } + }() +} + +func (fs *bufferedSink) Close() error { + if fs.writeTicker != nil { + fs.writeTicker.Stop() + } + fs.mu.Lock() + if err := fs.buf.Flush(); err != nil { + grpclogLogger.Warningf("failed to flush to Sink: %v", err) + } + if err := fs.closer.Close(); err != nil { + grpclogLogger.Warningf("failed to close the underlying WriterCloser: %v", err) + } + if err := fs.out.Close(); err != nil { + grpclogLogger.Warningf("failed to close the Sink: %v", err) + } + fs.mu.Unlock() + return nil +} + +// NewBufferedSink creates a binary log sink with the given WriteCloser. +// +// Write() marshals the proto message and writes it to the given writer. Each +// message is prefixed with a 4 byte big endian unsigned integer as the length. +// +// Content is kept in a buffer, and is flushed every 60 seconds. +// +// Close closes the WriteCloser. +func NewBufferedSink(o io.WriteCloser) Sink { + bufW := bufio.NewWriter(o) + return &bufferedSink{ + closer: o, + out: newWriterSink(bufW), + buf: bufW, + } +} diff --git a/vendor/google.golang.org/grpc/internal/buffer/unbounded.go b/vendor/google.golang.org/grpc/internal/buffer/unbounded.go new file mode 100644 index 000000000..9f6a0c120 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/buffer/unbounded.go @@ -0,0 +1,85 @@ +/* + * Copyright 2019 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package buffer provides an implementation of an unbounded buffer. +package buffer + +import "sync" + +// Unbounded is an implementation of an unbounded buffer which does not use +// extra goroutines. This is typically used for passing updates from one entity +// to another within gRPC. +// +// All methods on this type are thread-safe and don't block on anything except +// the underlying mutex used for synchronization. +// +// Unbounded supports values of any type to be stored in it by using a channel +// of `interface{}`. This means that a call to Put() incurs an extra memory +// allocation, and also that users need a type assertion while reading. For +// performance critical code paths, using Unbounded is strongly discouraged and +// defining a new type specific implementation of this buffer is preferred. See +// internal/transport/transport.go for an example of this. +type Unbounded struct { + c chan interface{} + mu sync.Mutex + backlog []interface{} +} + +// NewUnbounded returns a new instance of Unbounded. +func NewUnbounded() *Unbounded { + return &Unbounded{c: make(chan interface{}, 1)} +} + +// Put adds t to the unbounded buffer. +func (b *Unbounded) Put(t interface{}) { + b.mu.Lock() + if len(b.backlog) == 0 { + select { + case b.c <- t: + b.mu.Unlock() + return + default: + } + } + b.backlog = append(b.backlog, t) + b.mu.Unlock() +} + +// Load sends the earliest buffered data, if any, onto the read channel +// returned by Get(). Users are expected to call this every time they read a +// value from the read channel. +func (b *Unbounded) Load() { + b.mu.Lock() + if len(b.backlog) > 0 { + select { + case b.c <- b.backlog[0]: + b.backlog[0] = nil + b.backlog = b.backlog[1:] + default: + } + } + b.mu.Unlock() +} + +// Get returns a read channel on which values added to the buffer, via Put(), +// are sent on. +// +// Upon reading a value from this channel, users are expected to call Load() to +// send the next buffered value onto the channel if there is any. +func (b *Unbounded) Get() <-chan interface{} { + return b.c +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/funcs.go b/vendor/google.golang.org/grpc/internal/channelz/funcs.go new file mode 100644 index 000000000..f73141393 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/funcs.go @@ -0,0 +1,737 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package channelz defines APIs for enabling channelz service, entry +// registration/deletion, and accessing channelz data. It also defines channelz +// metric struct formats. +// +// All APIs in this package are experimental. +package channelz + +import ( + "fmt" + "sort" + "sync" + "sync/atomic" + "time" + + "google.golang.org/grpc/grpclog" +) + +const ( + defaultMaxTraceEntry int32 = 30 +) + +var ( + db dbWrapper + idGen idGenerator + // EntryPerPage defines the number of channelz entries to be shown on a web page. + EntryPerPage = int64(50) + curState int32 + maxTraceEntry = defaultMaxTraceEntry +) + +// TurnOn turns on channelz data collection. +func TurnOn() { + if !IsOn() { + NewChannelzStorage() + atomic.StoreInt32(&curState, 1) + } +} + +// IsOn returns whether channelz data collection is on. +func IsOn() bool { + return atomic.CompareAndSwapInt32(&curState, 1, 1) +} + +// SetMaxTraceEntry sets maximum number of trace entry per entity (i.e. channel/subchannel). +// Setting it to 0 will disable channel tracing. +func SetMaxTraceEntry(i int32) { + atomic.StoreInt32(&maxTraceEntry, i) +} + +// ResetMaxTraceEntryToDefault resets the maximum number of trace entry per entity to default. +func ResetMaxTraceEntryToDefault() { + atomic.StoreInt32(&maxTraceEntry, defaultMaxTraceEntry) +} + +func getMaxTraceEntry() int { + i := atomic.LoadInt32(&maxTraceEntry) + return int(i) +} + +// dbWarpper wraps around a reference to internal channelz data storage, and +// provide synchronized functionality to set and get the reference. +type dbWrapper struct { + mu sync.RWMutex + DB *channelMap +} + +func (d *dbWrapper) set(db *channelMap) { + d.mu.Lock() + d.DB = db + d.mu.Unlock() +} + +func (d *dbWrapper) get() *channelMap { + d.mu.RLock() + defer d.mu.RUnlock() + return d.DB +} + +// NewChannelzStorage initializes channelz data storage and id generator. +// +// This function returns a cleanup function to wait for all channelz state to be reset by the +// grpc goroutines when those entities get closed. By using this cleanup function, we make sure tests +// don't mess up each other, i.e. lingering goroutine from previous test doing entity removal happen +// to remove some entity just register by the new test, since the id space is the same. +// +// Note: This function is exported for testing purpose only. User should not call +// it in most cases. +func NewChannelzStorage() (cleanup func() error) { + db.set(&channelMap{ + topLevelChannels: make(map[int64]struct{}), + channels: make(map[int64]*channel), + listenSockets: make(map[int64]*listenSocket), + normalSockets: make(map[int64]*normalSocket), + servers: make(map[int64]*server), + subChannels: make(map[int64]*subChannel), + }) + idGen.reset() + return func() error { + var err error + cm := db.get() + if cm == nil { + return nil + } + for i := 0; i < 1000; i++ { + cm.mu.Lock() + if len(cm.topLevelChannels) == 0 && len(cm.servers) == 0 && len(cm.channels) == 0 && len(cm.subChannels) == 0 && len(cm.listenSockets) == 0 && len(cm.normalSockets) == 0 { + cm.mu.Unlock() + // all things stored in the channelz map have been cleared. + return nil + } + cm.mu.Unlock() + time.Sleep(10 * time.Millisecond) + } + + cm.mu.Lock() + err = fmt.Errorf("after 10s the channelz map has not been cleaned up yet, topchannels: %d, servers: %d, channels: %d, subchannels: %d, listen sockets: %d, normal sockets: %d", len(cm.topLevelChannels), len(cm.servers), len(cm.channels), len(cm.subChannels), len(cm.listenSockets), len(cm.normalSockets)) + cm.mu.Unlock() + return err + } +} + +// GetTopChannels returns a slice of top channel's ChannelMetric, along with a +// boolean indicating whether there's more top channels to be queried for. +// +// The arg id specifies that only top channel with id at or above it will be included +// in the result. The returned slice is up to a length of the arg maxResults or +// EntryPerPage if maxResults is zero, and is sorted in ascending id order. +func GetTopChannels(id int64, maxResults int64) ([]*ChannelMetric, bool) { + return db.get().GetTopChannels(id, maxResults) +} + +// GetServers returns a slice of server's ServerMetric, along with a +// boolean indicating whether there's more servers to be queried for. +// +// The arg id specifies that only server with id at or above it will be included +// in the result. The returned slice is up to a length of the arg maxResults or +// EntryPerPage if maxResults is zero, and is sorted in ascending id order. +func GetServers(id int64, maxResults int64) ([]*ServerMetric, bool) { + return db.get().GetServers(id, maxResults) +} + +// GetServerSockets returns a slice of server's (identified by id) normal socket's +// SocketMetric, along with a boolean indicating whether there's more sockets to +// be queried for. +// +// The arg startID specifies that only sockets with id at or above it will be +// included in the result. The returned slice is up to a length of the arg maxResults +// or EntryPerPage if maxResults is zero, and is sorted in ascending id order. +func GetServerSockets(id int64, startID int64, maxResults int64) ([]*SocketMetric, bool) { + return db.get().GetServerSockets(id, startID, maxResults) +} + +// GetChannel returns the ChannelMetric for the channel (identified by id). +func GetChannel(id int64) *ChannelMetric { + return db.get().GetChannel(id) +} + +// GetSubChannel returns the SubChannelMetric for the subchannel (identified by id). +func GetSubChannel(id int64) *SubChannelMetric { + return db.get().GetSubChannel(id) +} + +// GetSocket returns the SocketInternalMetric for the socket (identified by id). +func GetSocket(id int64) *SocketMetric { + return db.get().GetSocket(id) +} + +// GetServer returns the ServerMetric for the server (identified by id). +func GetServer(id int64) *ServerMetric { + return db.get().GetServer(id) +} + +// RegisterChannel registers the given channel c in channelz database with ref +// as its reference name, and add it to the child list of its parent (identified +// by pid). pid = 0 means no parent. It returns the unique channelz tracking id +// assigned to this channel. +func RegisterChannel(c Channel, pid int64, ref string) int64 { + id := idGen.genID() + cn := &channel{ + refName: ref, + c: c, + subChans: make(map[int64]string), + nestedChans: make(map[int64]string), + id: id, + pid: pid, + trace: &channelTrace{createdTime: time.Now(), events: make([]*TraceEvent, 0, getMaxTraceEntry())}, + } + if pid == 0 { + db.get().addChannel(id, cn, true, pid, ref) + } else { + db.get().addChannel(id, cn, false, pid, ref) + } + return id +} + +// RegisterSubChannel registers the given channel c in channelz database with ref +// as its reference name, and add it to the child list of its parent (identified +// by pid). It returns the unique channelz tracking id assigned to this subchannel. +func RegisterSubChannel(c Channel, pid int64, ref string) int64 { + if pid == 0 { + logger.Error("a SubChannel's parent id cannot be 0") + return 0 + } + id := idGen.genID() + sc := &subChannel{ + refName: ref, + c: c, + sockets: make(map[int64]string), + id: id, + pid: pid, + trace: &channelTrace{createdTime: time.Now(), events: make([]*TraceEvent, 0, getMaxTraceEntry())}, + } + db.get().addSubChannel(id, sc, pid, ref) + return id +} + +// RegisterServer registers the given server s in channelz database. It returns +// the unique channelz tracking id assigned to this server. +func RegisterServer(s Server, ref string) int64 { + id := idGen.genID() + svr := &server{ + refName: ref, + s: s, + sockets: make(map[int64]string), + listenSockets: make(map[int64]string), + id: id, + } + db.get().addServer(id, svr) + return id +} + +// RegisterListenSocket registers the given listen socket s in channelz database +// with ref as its reference name, and add it to the child list of its parent +// (identified by pid). It returns the unique channelz tracking id assigned to +// this listen socket. +func RegisterListenSocket(s Socket, pid int64, ref string) int64 { + if pid == 0 { + logger.Error("a ListenSocket's parent id cannot be 0") + return 0 + } + id := idGen.genID() + ls := &listenSocket{refName: ref, s: s, id: id, pid: pid} + db.get().addListenSocket(id, ls, pid, ref) + return id +} + +// RegisterNormalSocket registers the given normal socket s in channelz database +// with ref as its reference name, and add it to the child list of its parent +// (identified by pid). It returns the unique channelz tracking id assigned to +// this normal socket. +func RegisterNormalSocket(s Socket, pid int64, ref string) int64 { + if pid == 0 { + logger.Error("a NormalSocket's parent id cannot be 0") + return 0 + } + id := idGen.genID() + ns := &normalSocket{refName: ref, s: s, id: id, pid: pid} + db.get().addNormalSocket(id, ns, pid, ref) + return id +} + +// RemoveEntry removes an entry with unique channelz trakcing id to be id from +// channelz database. +func RemoveEntry(id int64) { + db.get().removeEntry(id) +} + +// TraceEventDesc is what the caller of AddTraceEvent should provide to describe the event to be added +// to the channel trace. +// The Parent field is optional. It is used for event that will be recorded in the entity's parent +// trace also. +type TraceEventDesc struct { + Desc string + Severity Severity + Parent *TraceEventDesc +} + +// AddTraceEvent adds trace related to the entity with specified id, using the provided TraceEventDesc. +func AddTraceEvent(l grpclog.DepthLoggerV2, id int64, depth int, desc *TraceEventDesc) { + for d := desc; d != nil; d = d.Parent { + switch d.Severity { + case CtUnknown, CtInfo: + l.InfoDepth(depth+1, d.Desc) + case CtWarning: + l.WarningDepth(depth+1, d.Desc) + case CtError: + l.ErrorDepth(depth+1, d.Desc) + } + } + if getMaxTraceEntry() == 0 { + return + } + db.get().traceEvent(id, desc) +} + +// channelMap is the storage data structure for channelz. +// Methods of channelMap can be divided in two two categories with respect to locking. +// 1. Methods acquire the global lock. +// 2. Methods that can only be called when global lock is held. +// A second type of method need always to be called inside a first type of method. +type channelMap struct { + mu sync.RWMutex + topLevelChannels map[int64]struct{} + servers map[int64]*server + channels map[int64]*channel + subChannels map[int64]*subChannel + listenSockets map[int64]*listenSocket + normalSockets map[int64]*normalSocket +} + +func (c *channelMap) addServer(id int64, s *server) { + c.mu.Lock() + s.cm = c + c.servers[id] = s + c.mu.Unlock() +} + +func (c *channelMap) addChannel(id int64, cn *channel, isTopChannel bool, pid int64, ref string) { + c.mu.Lock() + cn.cm = c + cn.trace.cm = c + c.channels[id] = cn + if isTopChannel { + c.topLevelChannels[id] = struct{}{} + } else { + c.findEntry(pid).addChild(id, cn) + } + c.mu.Unlock() +} + +func (c *channelMap) addSubChannel(id int64, sc *subChannel, pid int64, ref string) { + c.mu.Lock() + sc.cm = c + sc.trace.cm = c + c.subChannels[id] = sc + c.findEntry(pid).addChild(id, sc) + c.mu.Unlock() +} + +func (c *channelMap) addListenSocket(id int64, ls *listenSocket, pid int64, ref string) { + c.mu.Lock() + ls.cm = c + c.listenSockets[id] = ls + c.findEntry(pid).addChild(id, ls) + c.mu.Unlock() +} + +func (c *channelMap) addNormalSocket(id int64, ns *normalSocket, pid int64, ref string) { + c.mu.Lock() + ns.cm = c + c.normalSockets[id] = ns + c.findEntry(pid).addChild(id, ns) + c.mu.Unlock() +} + +// removeEntry triggers the removal of an entry, which may not indeed delete the entry, if it has to +// wait on the deletion of its children and until no other entity's channel trace references it. +// It may lead to a chain of entry deletion. For example, deleting the last socket of a gracefully +// shutting down server will lead to the server being also deleted. +func (c *channelMap) removeEntry(id int64) { + c.mu.Lock() + c.findEntry(id).triggerDelete() + c.mu.Unlock() +} + +// c.mu must be held by the caller +func (c *channelMap) decrTraceRefCount(id int64) { + e := c.findEntry(id) + if v, ok := e.(tracedChannel); ok { + v.decrTraceRefCount() + e.deleteSelfIfReady() + } +} + +// c.mu must be held by the caller. +func (c *channelMap) findEntry(id int64) entry { + var v entry + var ok bool + if v, ok = c.channels[id]; ok { + return v + } + if v, ok = c.subChannels[id]; ok { + return v + } + if v, ok = c.servers[id]; ok { + return v + } + if v, ok = c.listenSockets[id]; ok { + return v + } + if v, ok = c.normalSockets[id]; ok { + return v + } + return &dummyEntry{idNotFound: id} +} + +// c.mu must be held by the caller +// deleteEntry simply deletes an entry from the channelMap. Before calling this +// method, caller must check this entry is ready to be deleted, i.e removeEntry() +// has been called on it, and no children still exist. +// Conditionals are ordered by the expected frequency of deletion of each entity +// type, in order to optimize performance. +func (c *channelMap) deleteEntry(id int64) { + var ok bool + if _, ok = c.normalSockets[id]; ok { + delete(c.normalSockets, id) + return + } + if _, ok = c.subChannels[id]; ok { + delete(c.subChannels, id) + return + } + if _, ok = c.channels[id]; ok { + delete(c.channels, id) + delete(c.topLevelChannels, id) + return + } + if _, ok = c.listenSockets[id]; ok { + delete(c.listenSockets, id) + return + } + if _, ok = c.servers[id]; ok { + delete(c.servers, id) + return + } +} + +func (c *channelMap) traceEvent(id int64, desc *TraceEventDesc) { + c.mu.Lock() + child := c.findEntry(id) + childTC, ok := child.(tracedChannel) + if !ok { + c.mu.Unlock() + return + } + childTC.getChannelTrace().append(&TraceEvent{Desc: desc.Desc, Severity: desc.Severity, Timestamp: time.Now()}) + if desc.Parent != nil { + parent := c.findEntry(child.getParentID()) + var chanType RefChannelType + switch child.(type) { + case *channel: + chanType = RefChannel + case *subChannel: + chanType = RefSubChannel + } + if parentTC, ok := parent.(tracedChannel); ok { + parentTC.getChannelTrace().append(&TraceEvent{ + Desc: desc.Parent.Desc, + Severity: desc.Parent.Severity, + Timestamp: time.Now(), + RefID: id, + RefName: childTC.getRefName(), + RefType: chanType, + }) + childTC.incrTraceRefCount() + } + } + c.mu.Unlock() +} + +type int64Slice []int64 + +func (s int64Slice) Len() int { return len(s) } +func (s int64Slice) Swap(i, j int) { s[i], s[j] = s[j], s[i] } +func (s int64Slice) Less(i, j int) bool { return s[i] < s[j] } + +func copyMap(m map[int64]string) map[int64]string { + n := make(map[int64]string) + for k, v := range m { + n[k] = v + } + return n +} + +func min(a, b int64) int64 { + if a < b { + return a + } + return b +} + +func (c *channelMap) GetTopChannels(id int64, maxResults int64) ([]*ChannelMetric, bool) { + if maxResults <= 0 { + maxResults = EntryPerPage + } + c.mu.RLock() + l := int64(len(c.topLevelChannels)) + ids := make([]int64, 0, l) + cns := make([]*channel, 0, min(l, maxResults)) + + for k := range c.topLevelChannels { + ids = append(ids, k) + } + sort.Sort(int64Slice(ids)) + idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= id }) + count := int64(0) + var end bool + var t []*ChannelMetric + for i, v := range ids[idx:] { + if count == maxResults { + break + } + if cn, ok := c.channels[v]; ok { + cns = append(cns, cn) + t = append(t, &ChannelMetric{ + NestedChans: copyMap(cn.nestedChans), + SubChans: copyMap(cn.subChans), + }) + count++ + } + if i == len(ids[idx:])-1 { + end = true + break + } + } + c.mu.RUnlock() + if count == 0 { + end = true + } + + for i, cn := range cns { + t[i].ChannelData = cn.c.ChannelzMetric() + t[i].ID = cn.id + t[i].RefName = cn.refName + t[i].Trace = cn.trace.dumpData() + } + return t, end +} + +func (c *channelMap) GetServers(id, maxResults int64) ([]*ServerMetric, bool) { + if maxResults <= 0 { + maxResults = EntryPerPage + } + c.mu.RLock() + l := int64(len(c.servers)) + ids := make([]int64, 0, l) + ss := make([]*server, 0, min(l, maxResults)) + for k := range c.servers { + ids = append(ids, k) + } + sort.Sort(int64Slice(ids)) + idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= id }) + count := int64(0) + var end bool + var s []*ServerMetric + for i, v := range ids[idx:] { + if count == maxResults { + break + } + if svr, ok := c.servers[v]; ok { + ss = append(ss, svr) + s = append(s, &ServerMetric{ + ListenSockets: copyMap(svr.listenSockets), + }) + count++ + } + if i == len(ids[idx:])-1 { + end = true + break + } + } + c.mu.RUnlock() + if count == 0 { + end = true + } + + for i, svr := range ss { + s[i].ServerData = svr.s.ChannelzMetric() + s[i].ID = svr.id + s[i].RefName = svr.refName + } + return s, end +} + +func (c *channelMap) GetServerSockets(id int64, startID int64, maxResults int64) ([]*SocketMetric, bool) { + if maxResults <= 0 { + maxResults = EntryPerPage + } + var svr *server + var ok bool + c.mu.RLock() + if svr, ok = c.servers[id]; !ok { + // server with id doesn't exist. + c.mu.RUnlock() + return nil, true + } + svrskts := svr.sockets + l := int64(len(svrskts)) + ids := make([]int64, 0, l) + sks := make([]*normalSocket, 0, min(l, maxResults)) + for k := range svrskts { + ids = append(ids, k) + } + sort.Sort(int64Slice(ids)) + idx := sort.Search(len(ids), func(i int) bool { return ids[i] >= startID }) + count := int64(0) + var end bool + for i, v := range ids[idx:] { + if count == maxResults { + break + } + if ns, ok := c.normalSockets[v]; ok { + sks = append(sks, ns) + count++ + } + if i == len(ids[idx:])-1 { + end = true + break + } + } + c.mu.RUnlock() + if count == 0 { + end = true + } + var s []*SocketMetric + for _, ns := range sks { + sm := &SocketMetric{} + sm.SocketData = ns.s.ChannelzMetric() + sm.ID = ns.id + sm.RefName = ns.refName + s = append(s, sm) + } + return s, end +} + +func (c *channelMap) GetChannel(id int64) *ChannelMetric { + cm := &ChannelMetric{} + var cn *channel + var ok bool + c.mu.RLock() + if cn, ok = c.channels[id]; !ok { + // channel with id doesn't exist. + c.mu.RUnlock() + return nil + } + cm.NestedChans = copyMap(cn.nestedChans) + cm.SubChans = copyMap(cn.subChans) + // cn.c can be set to &dummyChannel{} when deleteSelfFromMap is called. Save a copy of cn.c when + // holding the lock to prevent potential data race. + chanCopy := cn.c + c.mu.RUnlock() + cm.ChannelData = chanCopy.ChannelzMetric() + cm.ID = cn.id + cm.RefName = cn.refName + cm.Trace = cn.trace.dumpData() + return cm +} + +func (c *channelMap) GetSubChannel(id int64) *SubChannelMetric { + cm := &SubChannelMetric{} + var sc *subChannel + var ok bool + c.mu.RLock() + if sc, ok = c.subChannels[id]; !ok { + // subchannel with id doesn't exist. + c.mu.RUnlock() + return nil + } + cm.Sockets = copyMap(sc.sockets) + // sc.c can be set to &dummyChannel{} when deleteSelfFromMap is called. Save a copy of sc.c when + // holding the lock to prevent potential data race. + chanCopy := sc.c + c.mu.RUnlock() + cm.ChannelData = chanCopy.ChannelzMetric() + cm.ID = sc.id + cm.RefName = sc.refName + cm.Trace = sc.trace.dumpData() + return cm +} + +func (c *channelMap) GetSocket(id int64) *SocketMetric { + sm := &SocketMetric{} + c.mu.RLock() + if ls, ok := c.listenSockets[id]; ok { + c.mu.RUnlock() + sm.SocketData = ls.s.ChannelzMetric() + sm.ID = ls.id + sm.RefName = ls.refName + return sm + } + if ns, ok := c.normalSockets[id]; ok { + c.mu.RUnlock() + sm.SocketData = ns.s.ChannelzMetric() + sm.ID = ns.id + sm.RefName = ns.refName + return sm + } + c.mu.RUnlock() + return nil +} + +func (c *channelMap) GetServer(id int64) *ServerMetric { + sm := &ServerMetric{} + var svr *server + var ok bool + c.mu.RLock() + if svr, ok = c.servers[id]; !ok { + c.mu.RUnlock() + return nil + } + sm.ListenSockets = copyMap(svr.listenSockets) + c.mu.RUnlock() + sm.ID = svr.id + sm.RefName = svr.refName + sm.ServerData = svr.s.ChannelzMetric() + return sm +} + +type idGenerator struct { + id int64 +} + +func (i *idGenerator) reset() { + atomic.StoreInt64(&i.id, 0) +} + +func (i *idGenerator) genID() int64 { + return atomic.AddInt64(&i.id, 1) +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/logging.go b/vendor/google.golang.org/grpc/internal/channelz/logging.go new file mode 100644 index 000000000..b0013f9c8 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/logging.go @@ -0,0 +1,102 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package channelz + +import ( + "fmt" + + "google.golang.org/grpc/grpclog" +) + +var logger = grpclog.Component("channelz") + +// Info logs and adds a trace event if channelz is on. +func Info(l grpclog.DepthLoggerV2, id int64, args ...interface{}) { + if IsOn() { + AddTraceEvent(l, id, 1, &TraceEventDesc{ + Desc: fmt.Sprint(args...), + Severity: CtInfo, + }) + } else { + l.InfoDepth(1, args...) + } +} + +// Infof logs and adds a trace event if channelz is on. +func Infof(l grpclog.DepthLoggerV2, id int64, format string, args ...interface{}) { + msg := fmt.Sprintf(format, args...) + if IsOn() { + AddTraceEvent(l, id, 1, &TraceEventDesc{ + Desc: msg, + Severity: CtInfo, + }) + } else { + l.InfoDepth(1, msg) + } +} + +// Warning logs and adds a trace event if channelz is on. +func Warning(l grpclog.DepthLoggerV2, id int64, args ...interface{}) { + if IsOn() { + AddTraceEvent(l, id, 1, &TraceEventDesc{ + Desc: fmt.Sprint(args...), + Severity: CtWarning, + }) + } else { + l.WarningDepth(1, args...) + } +} + +// Warningf logs and adds a trace event if channelz is on. +func Warningf(l grpclog.DepthLoggerV2, id int64, format string, args ...interface{}) { + msg := fmt.Sprintf(format, args...) + if IsOn() { + AddTraceEvent(l, id, 1, &TraceEventDesc{ + Desc: msg, + Severity: CtWarning, + }) + } else { + l.WarningDepth(1, msg) + } +} + +// Error logs and adds a trace event if channelz is on. +func Error(l grpclog.DepthLoggerV2, id int64, args ...interface{}) { + if IsOn() { + AddTraceEvent(l, id, 1, &TraceEventDesc{ + Desc: fmt.Sprint(args...), + Severity: CtError, + }) + } else { + l.ErrorDepth(1, args...) + } +} + +// Errorf logs and adds a trace event if channelz is on. +func Errorf(l grpclog.DepthLoggerV2, id int64, format string, args ...interface{}) { + msg := fmt.Sprintf(format, args...) + if IsOn() { + AddTraceEvent(l, id, 1, &TraceEventDesc{ + Desc: msg, + Severity: CtError, + }) + } else { + l.ErrorDepth(1, msg) + } +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/types.go b/vendor/google.golang.org/grpc/internal/channelz/types.go new file mode 100644 index 000000000..3c595d154 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/types.go @@ -0,0 +1,701 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package channelz + +import ( + "net" + "sync" + "sync/atomic" + "time" + + "google.golang.org/grpc/connectivity" + "google.golang.org/grpc/credentials" +) + +// entry represents a node in the channelz database. +type entry interface { + // addChild adds a child e, whose channelz id is id to child list + addChild(id int64, e entry) + // deleteChild deletes a child with channelz id to be id from child list + deleteChild(id int64) + // triggerDelete tries to delete self from channelz database. However, if child + // list is not empty, then deletion from the database is on hold until the last + // child is deleted from database. + triggerDelete() + // deleteSelfIfReady check whether triggerDelete() has been called before, and whether child + // list is now empty. If both conditions are met, then delete self from database. + deleteSelfIfReady() + // getParentID returns parent ID of the entry. 0 value parent ID means no parent. + getParentID() int64 +} + +// dummyEntry is a fake entry to handle entry not found case. +type dummyEntry struct { + idNotFound int64 +} + +func (d *dummyEntry) addChild(id int64, e entry) { + // Note: It is possible for a normal program to reach here under race condition. + // For example, there could be a race between ClientConn.Close() info being propagated + // to addrConn and http2Client. ClientConn.Close() cancel the context and result + // in http2Client to error. The error info is then caught by transport monitor + // and before addrConn.tearDown() is called in side ClientConn.Close(). Therefore, + // the addrConn will create a new transport. And when registering the new transport in + // channelz, its parent addrConn could have already been torn down and deleted + // from channelz tracking, and thus reach the code here. + logger.Infof("attempt to add child of type %T with id %d to a parent (id=%d) that doesn't currently exist", e, id, d.idNotFound) +} + +func (d *dummyEntry) deleteChild(id int64) { + // It is possible for a normal program to reach here under race condition. + // Refer to the example described in addChild(). + logger.Infof("attempt to delete child with id %d from a parent (id=%d) that doesn't currently exist", id, d.idNotFound) +} + +func (d *dummyEntry) triggerDelete() { + logger.Warningf("attempt to delete an entry (id=%d) that doesn't currently exist", d.idNotFound) +} + +func (*dummyEntry) deleteSelfIfReady() { + // code should not reach here. deleteSelfIfReady is always called on an existing entry. +} + +func (*dummyEntry) getParentID() int64 { + return 0 +} + +// ChannelMetric defines the info channelz provides for a specific Channel, which +// includes ChannelInternalMetric and channelz-specific data, such as channelz id, +// child list, etc. +type ChannelMetric struct { + // ID is the channelz id of this channel. + ID int64 + // RefName is the human readable reference string of this channel. + RefName string + // ChannelData contains channel internal metric reported by the channel through + // ChannelzMetric(). + ChannelData *ChannelInternalMetric + // NestedChans tracks the nested channel type children of this channel in the format of + // a map from nested channel channelz id to corresponding reference string. + NestedChans map[int64]string + // SubChans tracks the subchannel type children of this channel in the format of a + // map from subchannel channelz id to corresponding reference string. + SubChans map[int64]string + // Sockets tracks the socket type children of this channel in the format of a map + // from socket channelz id to corresponding reference string. + // Note current grpc implementation doesn't allow channel having sockets directly, + // therefore, this is field is unused. + Sockets map[int64]string + // Trace contains the most recent traced events. + Trace *ChannelTrace +} + +// SubChannelMetric defines the info channelz provides for a specific SubChannel, +// which includes ChannelInternalMetric and channelz-specific data, such as +// channelz id, child list, etc. +type SubChannelMetric struct { + // ID is the channelz id of this subchannel. + ID int64 + // RefName is the human readable reference string of this subchannel. + RefName string + // ChannelData contains subchannel internal metric reported by the subchannel + // through ChannelzMetric(). + ChannelData *ChannelInternalMetric + // NestedChans tracks the nested channel type children of this subchannel in the format of + // a map from nested channel channelz id to corresponding reference string. + // Note current grpc implementation doesn't allow subchannel to have nested channels + // as children, therefore, this field is unused. + NestedChans map[int64]string + // SubChans tracks the subchannel type children of this subchannel in the format of a + // map from subchannel channelz id to corresponding reference string. + // Note current grpc implementation doesn't allow subchannel to have subchannels + // as children, therefore, this field is unused. + SubChans map[int64]string + // Sockets tracks the socket type children of this subchannel in the format of a map + // from socket channelz id to corresponding reference string. + Sockets map[int64]string + // Trace contains the most recent traced events. + Trace *ChannelTrace +} + +// ChannelInternalMetric defines the struct that the implementor of Channel interface +// should return from ChannelzMetric(). +type ChannelInternalMetric struct { + // current connectivity state of the channel. + State connectivity.State + // The target this channel originally tried to connect to. May be absent + Target string + // The number of calls started on the channel. + CallsStarted int64 + // The number of calls that have completed with an OK status. + CallsSucceeded int64 + // The number of calls that have a completed with a non-OK status. + CallsFailed int64 + // The last time a call was started on the channel. + LastCallStartedTimestamp time.Time +} + +// ChannelTrace stores traced events on a channel/subchannel and related info. +type ChannelTrace struct { + // EventNum is the number of events that ever got traced (i.e. including those that have been deleted) + EventNum int64 + // CreationTime is the creation time of the trace. + CreationTime time.Time + // Events stores the most recent trace events (up to $maxTraceEntry, newer event will overwrite the + // oldest one) + Events []*TraceEvent +} + +// TraceEvent represent a single trace event +type TraceEvent struct { + // Desc is a simple description of the trace event. + Desc string + // Severity states the severity of this trace event. + Severity Severity + // Timestamp is the event time. + Timestamp time.Time + // RefID is the id of the entity that gets referenced in the event. RefID is 0 if no other entity is + // involved in this event. + // e.g. SubChannel (id: 4[]) Created. --> RefID = 4, RefName = "" (inside []) + RefID int64 + // RefName is the reference name for the entity that gets referenced in the event. + RefName string + // RefType indicates the referenced entity type, i.e Channel or SubChannel. + RefType RefChannelType +} + +// Channel is the interface that should be satisfied in order to be tracked by +// channelz as Channel or SubChannel. +type Channel interface { + ChannelzMetric() *ChannelInternalMetric +} + +type dummyChannel struct{} + +func (d *dummyChannel) ChannelzMetric() *ChannelInternalMetric { + return &ChannelInternalMetric{} +} + +type channel struct { + refName string + c Channel + closeCalled bool + nestedChans map[int64]string + subChans map[int64]string + id int64 + pid int64 + cm *channelMap + trace *channelTrace + // traceRefCount is the number of trace events that reference this channel. + // Non-zero traceRefCount means the trace of this channel cannot be deleted. + traceRefCount int32 +} + +func (c *channel) addChild(id int64, e entry) { + switch v := e.(type) { + case *subChannel: + c.subChans[id] = v.refName + case *channel: + c.nestedChans[id] = v.refName + default: + logger.Errorf("cannot add a child (id = %d) of type %T to a channel", id, e) + } +} + +func (c *channel) deleteChild(id int64) { + delete(c.subChans, id) + delete(c.nestedChans, id) + c.deleteSelfIfReady() +} + +func (c *channel) triggerDelete() { + c.closeCalled = true + c.deleteSelfIfReady() +} + +func (c *channel) getParentID() int64 { + return c.pid +} + +// deleteSelfFromTree tries to delete the channel from the channelz entry relation tree, which means +// deleting the channel reference from its parent's child list. +// +// In order for a channel to be deleted from the tree, it must meet the criteria that, removal of the +// corresponding grpc object has been invoked, and the channel does not have any children left. +// +// The returned boolean value indicates whether the channel has been successfully deleted from tree. +func (c *channel) deleteSelfFromTree() (deleted bool) { + if !c.closeCalled || len(c.subChans)+len(c.nestedChans) != 0 { + return false + } + // not top channel + if c.pid != 0 { + c.cm.findEntry(c.pid).deleteChild(c.id) + } + return true +} + +// deleteSelfFromMap checks whether it is valid to delete the channel from the map, which means +// deleting the channel from channelz's tracking entirely. Users can no longer use id to query the +// channel, and its memory will be garbage collected. +// +// The trace reference count of the channel must be 0 in order to be deleted from the map. This is +// specified in the channel tracing gRFC that as long as some other trace has reference to an entity, +// the trace of the referenced entity must not be deleted. In order to release the resource allocated +// by grpc, the reference to the grpc object is reset to a dummy object. +// +// deleteSelfFromMap must be called after deleteSelfFromTree returns true. +// +// It returns a bool to indicate whether the channel can be safely deleted from map. +func (c *channel) deleteSelfFromMap() (delete bool) { + if c.getTraceRefCount() != 0 { + c.c = &dummyChannel{} + return false + } + return true +} + +// deleteSelfIfReady tries to delete the channel itself from the channelz database. +// The delete process includes two steps: +// 1. delete the channel from the entry relation tree, i.e. delete the channel reference from its +// parent's child list. +// 2. delete the channel from the map, i.e. delete the channel entirely from channelz. Lookup by id +// will return entry not found error. +func (c *channel) deleteSelfIfReady() { + if !c.deleteSelfFromTree() { + return + } + if !c.deleteSelfFromMap() { + return + } + c.cm.deleteEntry(c.id) + c.trace.clear() +} + +func (c *channel) getChannelTrace() *channelTrace { + return c.trace +} + +func (c *channel) incrTraceRefCount() { + atomic.AddInt32(&c.traceRefCount, 1) +} + +func (c *channel) decrTraceRefCount() { + atomic.AddInt32(&c.traceRefCount, -1) +} + +func (c *channel) getTraceRefCount() int { + i := atomic.LoadInt32(&c.traceRefCount) + return int(i) +} + +func (c *channel) getRefName() string { + return c.refName +} + +type subChannel struct { + refName string + c Channel + closeCalled bool + sockets map[int64]string + id int64 + pid int64 + cm *channelMap + trace *channelTrace + traceRefCount int32 +} + +func (sc *subChannel) addChild(id int64, e entry) { + if v, ok := e.(*normalSocket); ok { + sc.sockets[id] = v.refName + } else { + logger.Errorf("cannot add a child (id = %d) of type %T to a subChannel", id, e) + } +} + +func (sc *subChannel) deleteChild(id int64) { + delete(sc.sockets, id) + sc.deleteSelfIfReady() +} + +func (sc *subChannel) triggerDelete() { + sc.closeCalled = true + sc.deleteSelfIfReady() +} + +func (sc *subChannel) getParentID() int64 { + return sc.pid +} + +// deleteSelfFromTree tries to delete the subchannel from the channelz entry relation tree, which +// means deleting the subchannel reference from its parent's child list. +// +// In order for a subchannel to be deleted from the tree, it must meet the criteria that, removal of +// the corresponding grpc object has been invoked, and the subchannel does not have any children left. +// +// The returned boolean value indicates whether the channel has been successfully deleted from tree. +func (sc *subChannel) deleteSelfFromTree() (deleted bool) { + if !sc.closeCalled || len(sc.sockets) != 0 { + return false + } + sc.cm.findEntry(sc.pid).deleteChild(sc.id) + return true +} + +// deleteSelfFromMap checks whether it is valid to delete the subchannel from the map, which means +// deleting the subchannel from channelz's tracking entirely. Users can no longer use id to query +// the subchannel, and its memory will be garbage collected. +// +// The trace reference count of the subchannel must be 0 in order to be deleted from the map. This is +// specified in the channel tracing gRFC that as long as some other trace has reference to an entity, +// the trace of the referenced entity must not be deleted. In order to release the resource allocated +// by grpc, the reference to the grpc object is reset to a dummy object. +// +// deleteSelfFromMap must be called after deleteSelfFromTree returns true. +// +// It returns a bool to indicate whether the channel can be safely deleted from map. +func (sc *subChannel) deleteSelfFromMap() (delete bool) { + if sc.getTraceRefCount() != 0 { + // free the grpc struct (i.e. addrConn) + sc.c = &dummyChannel{} + return false + } + return true +} + +// deleteSelfIfReady tries to delete the subchannel itself from the channelz database. +// The delete process includes two steps: +// 1. delete the subchannel from the entry relation tree, i.e. delete the subchannel reference from +// its parent's child list. +// 2. delete the subchannel from the map, i.e. delete the subchannel entirely from channelz. Lookup +// by id will return entry not found error. +func (sc *subChannel) deleteSelfIfReady() { + if !sc.deleteSelfFromTree() { + return + } + if !sc.deleteSelfFromMap() { + return + } + sc.cm.deleteEntry(sc.id) + sc.trace.clear() +} + +func (sc *subChannel) getChannelTrace() *channelTrace { + return sc.trace +} + +func (sc *subChannel) incrTraceRefCount() { + atomic.AddInt32(&sc.traceRefCount, 1) +} + +func (sc *subChannel) decrTraceRefCount() { + atomic.AddInt32(&sc.traceRefCount, -1) +} + +func (sc *subChannel) getTraceRefCount() int { + i := atomic.LoadInt32(&sc.traceRefCount) + return int(i) +} + +func (sc *subChannel) getRefName() string { + return sc.refName +} + +// SocketMetric defines the info channelz provides for a specific Socket, which +// includes SocketInternalMetric and channelz-specific data, such as channelz id, etc. +type SocketMetric struct { + // ID is the channelz id of this socket. + ID int64 + // RefName is the human readable reference string of this socket. + RefName string + // SocketData contains socket internal metric reported by the socket through + // ChannelzMetric(). + SocketData *SocketInternalMetric +} + +// SocketInternalMetric defines the struct that the implementor of Socket interface +// should return from ChannelzMetric(). +type SocketInternalMetric struct { + // The number of streams that have been started. + StreamsStarted int64 + // The number of streams that have ended successfully: + // On client side, receiving frame with eos bit set. + // On server side, sending frame with eos bit set. + StreamsSucceeded int64 + // The number of streams that have ended unsuccessfully: + // On client side, termination without receiving frame with eos bit set. + // On server side, termination without sending frame with eos bit set. + StreamsFailed int64 + // The number of messages successfully sent on this socket. + MessagesSent int64 + MessagesReceived int64 + // The number of keep alives sent. This is typically implemented with HTTP/2 + // ping messages. + KeepAlivesSent int64 + // The last time a stream was created by this endpoint. Usually unset for + // servers. + LastLocalStreamCreatedTimestamp time.Time + // The last time a stream was created by the remote endpoint. Usually unset + // for clients. + LastRemoteStreamCreatedTimestamp time.Time + // The last time a message was sent by this endpoint. + LastMessageSentTimestamp time.Time + // The last time a message was received by this endpoint. + LastMessageReceivedTimestamp time.Time + // The amount of window, granted to the local endpoint by the remote endpoint. + // This may be slightly out of date due to network latency. This does NOT + // include stream level or TCP level flow control info. + LocalFlowControlWindow int64 + // The amount of window, granted to the remote endpoint by the local endpoint. + // This may be slightly out of date due to network latency. This does NOT + // include stream level or TCP level flow control info. + RemoteFlowControlWindow int64 + // The locally bound address. + LocalAddr net.Addr + // The remote bound address. May be absent. + RemoteAddr net.Addr + // Optional, represents the name of the remote endpoint, if different than + // the original target name. + RemoteName string + SocketOptions *SocketOptionData + Security credentials.ChannelzSecurityValue +} + +// Socket is the interface that should be satisfied in order to be tracked by +// channelz as Socket. +type Socket interface { + ChannelzMetric() *SocketInternalMetric +} + +type listenSocket struct { + refName string + s Socket + id int64 + pid int64 + cm *channelMap +} + +func (ls *listenSocket) addChild(id int64, e entry) { + logger.Errorf("cannot add a child (id = %d) of type %T to a listen socket", id, e) +} + +func (ls *listenSocket) deleteChild(id int64) { + logger.Errorf("cannot delete a child (id = %d) from a listen socket", id) +} + +func (ls *listenSocket) triggerDelete() { + ls.cm.deleteEntry(ls.id) + ls.cm.findEntry(ls.pid).deleteChild(ls.id) +} + +func (ls *listenSocket) deleteSelfIfReady() { + logger.Errorf("cannot call deleteSelfIfReady on a listen socket") +} + +func (ls *listenSocket) getParentID() int64 { + return ls.pid +} + +type normalSocket struct { + refName string + s Socket + id int64 + pid int64 + cm *channelMap +} + +func (ns *normalSocket) addChild(id int64, e entry) { + logger.Errorf("cannot add a child (id = %d) of type %T to a normal socket", id, e) +} + +func (ns *normalSocket) deleteChild(id int64) { + logger.Errorf("cannot delete a child (id = %d) from a normal socket", id) +} + +func (ns *normalSocket) triggerDelete() { + ns.cm.deleteEntry(ns.id) + ns.cm.findEntry(ns.pid).deleteChild(ns.id) +} + +func (ns *normalSocket) deleteSelfIfReady() { + logger.Errorf("cannot call deleteSelfIfReady on a normal socket") +} + +func (ns *normalSocket) getParentID() int64 { + return ns.pid +} + +// ServerMetric defines the info channelz provides for a specific Server, which +// includes ServerInternalMetric and channelz-specific data, such as channelz id, +// child list, etc. +type ServerMetric struct { + // ID is the channelz id of this server. + ID int64 + // RefName is the human readable reference string of this server. + RefName string + // ServerData contains server internal metric reported by the server through + // ChannelzMetric(). + ServerData *ServerInternalMetric + // ListenSockets tracks the listener socket type children of this server in the + // format of a map from socket channelz id to corresponding reference string. + ListenSockets map[int64]string +} + +// ServerInternalMetric defines the struct that the implementor of Server interface +// should return from ChannelzMetric(). +type ServerInternalMetric struct { + // The number of incoming calls started on the server. + CallsStarted int64 + // The number of incoming calls that have completed with an OK status. + CallsSucceeded int64 + // The number of incoming calls that have a completed with a non-OK status. + CallsFailed int64 + // The last time a call was started on the server. + LastCallStartedTimestamp time.Time +} + +// Server is the interface to be satisfied in order to be tracked by channelz as +// Server. +type Server interface { + ChannelzMetric() *ServerInternalMetric +} + +type server struct { + refName string + s Server + closeCalled bool + sockets map[int64]string + listenSockets map[int64]string + id int64 + cm *channelMap +} + +func (s *server) addChild(id int64, e entry) { + switch v := e.(type) { + case *normalSocket: + s.sockets[id] = v.refName + case *listenSocket: + s.listenSockets[id] = v.refName + default: + logger.Errorf("cannot add a child (id = %d) of type %T to a server", id, e) + } +} + +func (s *server) deleteChild(id int64) { + delete(s.sockets, id) + delete(s.listenSockets, id) + s.deleteSelfIfReady() +} + +func (s *server) triggerDelete() { + s.closeCalled = true + s.deleteSelfIfReady() +} + +func (s *server) deleteSelfIfReady() { + if !s.closeCalled || len(s.sockets)+len(s.listenSockets) != 0 { + return + } + s.cm.deleteEntry(s.id) +} + +func (s *server) getParentID() int64 { + return 0 +} + +type tracedChannel interface { + getChannelTrace() *channelTrace + incrTraceRefCount() + decrTraceRefCount() + getRefName() string +} + +type channelTrace struct { + cm *channelMap + createdTime time.Time + eventCount int64 + mu sync.Mutex + events []*TraceEvent +} + +func (c *channelTrace) append(e *TraceEvent) { + c.mu.Lock() + if len(c.events) == getMaxTraceEntry() { + del := c.events[0] + c.events = c.events[1:] + if del.RefID != 0 { + // start recursive cleanup in a goroutine to not block the call originated from grpc. + go func() { + // need to acquire c.cm.mu lock to call the unlocked attemptCleanup func. + c.cm.mu.Lock() + c.cm.decrTraceRefCount(del.RefID) + c.cm.mu.Unlock() + }() + } + } + e.Timestamp = time.Now() + c.events = append(c.events, e) + c.eventCount++ + c.mu.Unlock() +} + +func (c *channelTrace) clear() { + c.mu.Lock() + for _, e := range c.events { + if e.RefID != 0 { + // caller should have already held the c.cm.mu lock. + c.cm.decrTraceRefCount(e.RefID) + } + } + c.mu.Unlock() +} + +// Severity is the severity level of a trace event. +// The canonical enumeration of all valid values is here: +// https://github.com/grpc/grpc-proto/blob/9b13d199cc0d4703c7ea26c9c330ba695866eb23/grpc/channelz/v1/channelz.proto#L126. +type Severity int + +const ( + // CtUnknown indicates unknown severity of a trace event. + CtUnknown Severity = iota + // CtInfo indicates info level severity of a trace event. + CtInfo + // CtWarning indicates warning level severity of a trace event. + CtWarning + // CtError indicates error level severity of a trace event. + CtError +) + +// RefChannelType is the type of the entity being referenced in a trace event. +type RefChannelType int + +const ( + // RefChannel indicates the referenced entity is a Channel. + RefChannel RefChannelType = iota + // RefSubChannel indicates the referenced entity is a SubChannel. + RefSubChannel +) + +func (c *channelTrace) dumpData() *ChannelTrace { + c.mu.Lock() + ct := &ChannelTrace{EventNum: c.eventCount, CreationTime: c.createdTime} + ct.Events = c.events[:len(c.events)] + c.mu.Unlock() + return ct +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/types_linux.go b/vendor/google.golang.org/grpc/internal/channelz/types_linux.go new file mode 100644 index 000000000..692dd6181 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/types_linux.go @@ -0,0 +1,53 @@ +// +build !appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package channelz + +import ( + "syscall" + + "golang.org/x/sys/unix" +) + +// SocketOptionData defines the struct to hold socket option data, and related +// getter function to obtain info from fd. +type SocketOptionData struct { + Linger *unix.Linger + RecvTimeout *unix.Timeval + SendTimeout *unix.Timeval + TCPInfo *unix.TCPInfo +} + +// Getsockopt defines the function to get socket options requested by channelz. +// It is to be passed to syscall.RawConn.Control(). +func (s *SocketOptionData) Getsockopt(fd uintptr) { + if v, err := unix.GetsockoptLinger(int(fd), syscall.SOL_SOCKET, syscall.SO_LINGER); err == nil { + s.Linger = v + } + if v, err := unix.GetsockoptTimeval(int(fd), syscall.SOL_SOCKET, syscall.SO_RCVTIMEO); err == nil { + s.RecvTimeout = v + } + if v, err := unix.GetsockoptTimeval(int(fd), syscall.SOL_SOCKET, syscall.SO_SNDTIMEO); err == nil { + s.SendTimeout = v + } + if v, err := unix.GetsockoptTCPInfo(int(fd), syscall.SOL_TCP, syscall.TCP_INFO); err == nil { + s.TCPInfo = v + } +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go b/vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go new file mode 100644 index 000000000..19c2fc521 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/types_nonlinux.go @@ -0,0 +1,42 @@ +// +build !linux appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package channelz + +import ( + "sync" +) + +var once sync.Once + +// SocketOptionData defines the struct to hold socket option data, and related +// getter function to obtain info from fd. +// Windows OS doesn't support Socket Option +type SocketOptionData struct { +} + +// Getsockopt defines the function to get socket options requested by channelz. +// It is to be passed to syscall.RawConn.Control(). +// Windows OS doesn't support Socket Option +func (s *SocketOptionData) Getsockopt(fd uintptr) { + once.Do(func() { + logger.Warning("Channelz: socket options are not supported on non-linux os and appengine.") + }) +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/util_linux.go b/vendor/google.golang.org/grpc/internal/channelz/util_linux.go new file mode 100644 index 000000000..fdf409d55 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/util_linux.go @@ -0,0 +1,39 @@ +// +build linux,!appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package channelz + +import ( + "syscall" +) + +// GetSocketOption gets the socket option info of the conn. +func GetSocketOption(socket interface{}) *SocketOptionData { + c, ok := socket.(syscall.Conn) + if !ok { + return nil + } + data := &SocketOptionData{} + if rawConn, err := c.SyscallConn(); err == nil { + rawConn.Control(data.Getsockopt) + return data + } + return nil +} diff --git a/vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go b/vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go new file mode 100644 index 000000000..8864a0811 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/channelz/util_nonlinux.go @@ -0,0 +1,26 @@ +// +build !linux appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package channelz + +// GetSocketOption gets the socket option info of the conn. +func GetSocketOption(c interface{}) *SocketOptionData { + return nil +} diff --git a/vendor/google.golang.org/grpc/internal/credentials/spiffe.go b/vendor/google.golang.org/grpc/internal/credentials/spiffe.go new file mode 100644 index 000000000..be70b6cdf --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/credentials/spiffe.go @@ -0,0 +1,77 @@ +// +build !appengine + +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package credentials defines APIs for parsing SPIFFE ID. +// +// All APIs in this package are experimental. +package credentials + +import ( + "crypto/tls" + "crypto/x509" + "net/url" + + "google.golang.org/grpc/grpclog" +) + +var logger = grpclog.Component("credentials") + +// SPIFFEIDFromState parses the SPIFFE ID from State. If the SPIFFE ID format +// is invalid, return nil with warning. +func SPIFFEIDFromState(state tls.ConnectionState) *url.URL { + if len(state.PeerCertificates) == 0 || len(state.PeerCertificates[0].URIs) == 0 { + return nil + } + return SPIFFEIDFromCert(state.PeerCertificates[0]) +} + +// SPIFFEIDFromCert parses the SPIFFE ID from x509.Certificate. If the SPIFFE +// ID format is invalid, return nil with warning. +func SPIFFEIDFromCert(cert *x509.Certificate) *url.URL { + if cert == nil || cert.URIs == nil { + return nil + } + var spiffeID *url.URL + for _, uri := range cert.URIs { + if uri == nil || uri.Scheme != "spiffe" || uri.Opaque != "" || (uri.User != nil && uri.User.Username() != "") { + continue + } + // From this point, we assume the uri is intended for a SPIFFE ID. + if len(uri.String()) > 2048 { + logger.Warning("invalid SPIFFE ID: total ID length larger than 2048 bytes") + return nil + } + if len(uri.Host) == 0 || len(uri.Path) == 0 { + logger.Warning("invalid SPIFFE ID: domain or workload ID is empty") + return nil + } + if len(uri.Host) > 255 { + logger.Warning("invalid SPIFFE ID: domain length larger than 255 characters") + return nil + } + // A valid SPIFFE certificate can only have exactly one URI SAN field. + if len(cert.URIs) > 1 { + logger.Warning("invalid SPIFFE ID: multiple URI SANs") + return nil + } + spiffeID = uri + } + return spiffeID +} diff --git a/vendor/google.golang.org/grpc/internal/credentials/spiffe_appengine.go b/vendor/google.golang.org/grpc/internal/credentials/spiffe_appengine.go new file mode 100644 index 000000000..af6f57719 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/credentials/spiffe_appengine.go @@ -0,0 +1,31 @@ +// +build appengine + +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package credentials + +import ( + "crypto/tls" + "net/url" +) + +// SPIFFEIDFromState is a no-op for appengine builds. +func SPIFFEIDFromState(state tls.ConnectionState) *url.URL { + return nil +} diff --git a/vendor/google.golang.org/grpc/internal/credentials/syscallconn.go b/vendor/google.golang.org/grpc/internal/credentials/syscallconn.go new file mode 100644 index 000000000..f499a614c --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/credentials/syscallconn.go @@ -0,0 +1,60 @@ +// +build !appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package credentials + +import ( + "net" + "syscall" +) + +type sysConn = syscall.Conn + +// syscallConn keeps reference of rawConn to support syscall.Conn for channelz. +// SyscallConn() (the method in interface syscall.Conn) is explicitly +// implemented on this type, +// +// Interface syscall.Conn is implemented by most net.Conn implementations (e.g. +// TCPConn, UnixConn), but is not part of net.Conn interface. So wrapper conns +// that embed net.Conn don't implement syscall.Conn. (Side note: tls.Conn +// doesn't embed net.Conn, so even if syscall.Conn is part of net.Conn, it won't +// help here). +type syscallConn struct { + net.Conn + // sysConn is a type alias of syscall.Conn. It's necessary because the name + // `Conn` collides with `net.Conn`. + sysConn +} + +// WrapSyscallConn tries to wrap rawConn and newConn into a net.Conn that +// implements syscall.Conn. rawConn will be used to support syscall, and newConn +// will be used for read/write. +// +// This function returns newConn if rawConn doesn't implement syscall.Conn. +func WrapSyscallConn(rawConn, newConn net.Conn) net.Conn { + sysConn, ok := rawConn.(syscall.Conn) + if !ok { + return newConn + } + return &syscallConn{ + Conn: newConn, + sysConn: sysConn, + } +} diff --git a/vendor/google.golang.org/grpc/internal/credentials/syscallconn_appengine.go b/vendor/google.golang.org/grpc/internal/credentials/syscallconn_appengine.go new file mode 100644 index 000000000..a6144cd66 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/credentials/syscallconn_appengine.go @@ -0,0 +1,30 @@ +// +build appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package credentials + +import ( + "net" +) + +// WrapSyscallConn returns newConn on appengine. +func WrapSyscallConn(rawConn, newConn net.Conn) net.Conn { + return newConn +} diff --git a/vendor/google.golang.org/grpc/internal/credentials/util.go b/vendor/google.golang.org/grpc/internal/credentials/util.go new file mode 100644 index 000000000..55664fa46 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/credentials/util.go @@ -0,0 +1,50 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package credentials + +import "crypto/tls" + +const alpnProtoStrH2 = "h2" + +// AppendH2ToNextProtos appends h2 to next protos. +func AppendH2ToNextProtos(ps []string) []string { + for _, p := range ps { + if p == alpnProtoStrH2 { + return ps + } + } + ret := make([]string, 0, len(ps)+1) + ret = append(ret, ps...) + return append(ret, alpnProtoStrH2) +} + +// CloneTLSConfig returns a shallow clone of the exported +// fields of cfg, ignoring the unexported sync.Once, which +// contains a mutex and must not be copied. +// +// If cfg is nil, a new zero tls.Config is returned. +// +// TODO: inline this function if possible. +func CloneTLSConfig(cfg *tls.Config) *tls.Config { + if cfg == nil { + return &tls.Config{} + } + + return cfg.Clone() +} diff --git a/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go b/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go new file mode 100644 index 000000000..73931a94b --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/envconfig/envconfig.go @@ -0,0 +1,38 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package envconfig contains grpc settings configured by environment variables. +package envconfig + +import ( + "os" + "strings" +) + +const ( + prefix = "GRPC_GO_" + retryStr = prefix + "RETRY" + txtErrIgnoreStr = prefix + "IGNORE_TXT_ERRORS" +) + +var ( + // Retry is set if retry is explicitly enabled via "GRPC_GO_RETRY=on". + Retry = strings.EqualFold(os.Getenv(retryStr), "on") + // TXTErrIgnore is set if TXT errors should be ignored ("GRPC_GO_IGNORE_TXT_ERRORS" is not "false"). + TXTErrIgnore = !strings.EqualFold(os.Getenv(txtErrIgnoreStr), "false") +) diff --git a/vendor/google.golang.org/grpc/internal/grpclog/grpclog.go b/vendor/google.golang.org/grpc/internal/grpclog/grpclog.go new file mode 100644 index 000000000..e6f975cbf --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpclog/grpclog.go @@ -0,0 +1,126 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package grpclog (internal) defines depth logging for grpc. +package grpclog + +import ( + "os" +) + +// Logger is the logger used for the non-depth log functions. +var Logger LoggerV2 + +// DepthLogger is the logger used for the depth log functions. +var DepthLogger DepthLoggerV2 + +// InfoDepth logs to the INFO log at the specified depth. +func InfoDepth(depth int, args ...interface{}) { + if DepthLogger != nil { + DepthLogger.InfoDepth(depth, args...) + } else { + Logger.Infoln(args...) + } +} + +// WarningDepth logs to the WARNING log at the specified depth. +func WarningDepth(depth int, args ...interface{}) { + if DepthLogger != nil { + DepthLogger.WarningDepth(depth, args...) + } else { + Logger.Warningln(args...) + } +} + +// ErrorDepth logs to the ERROR log at the specified depth. +func ErrorDepth(depth int, args ...interface{}) { + if DepthLogger != nil { + DepthLogger.ErrorDepth(depth, args...) + } else { + Logger.Errorln(args...) + } +} + +// FatalDepth logs to the FATAL log at the specified depth. +func FatalDepth(depth int, args ...interface{}) { + if DepthLogger != nil { + DepthLogger.FatalDepth(depth, args...) + } else { + Logger.Fatalln(args...) + } + os.Exit(1) +} + +// LoggerV2 does underlying logging work for grpclog. +// This is a copy of the LoggerV2 defined in the external grpclog package. It +// is defined here to avoid a circular dependency. +type LoggerV2 interface { + // Info logs to INFO log. Arguments are handled in the manner of fmt.Print. + Info(args ...interface{}) + // Infoln logs to INFO log. Arguments are handled in the manner of fmt.Println. + Infoln(args ...interface{}) + // Infof logs to INFO log. Arguments are handled in the manner of fmt.Printf. + Infof(format string, args ...interface{}) + // Warning logs to WARNING log. Arguments are handled in the manner of fmt.Print. + Warning(args ...interface{}) + // Warningln logs to WARNING log. Arguments are handled in the manner of fmt.Println. + Warningln(args ...interface{}) + // Warningf logs to WARNING log. Arguments are handled in the manner of fmt.Printf. + Warningf(format string, args ...interface{}) + // Error logs to ERROR log. Arguments are handled in the manner of fmt.Print. + Error(args ...interface{}) + // Errorln logs to ERROR log. Arguments are handled in the manner of fmt.Println. + Errorln(args ...interface{}) + // Errorf logs to ERROR log. Arguments are handled in the manner of fmt.Printf. + Errorf(format string, args ...interface{}) + // Fatal logs to ERROR log. Arguments are handled in the manner of fmt.Print. + // gRPC ensures that all Fatal logs will exit with os.Exit(1). + // Implementations may also call os.Exit() with a non-zero exit code. + Fatal(args ...interface{}) + // Fatalln logs to ERROR log. Arguments are handled in the manner of fmt.Println. + // gRPC ensures that all Fatal logs will exit with os.Exit(1). + // Implementations may also call os.Exit() with a non-zero exit code. + Fatalln(args ...interface{}) + // Fatalf logs to ERROR log. Arguments are handled in the manner of fmt.Printf. + // gRPC ensures that all Fatal logs will exit with os.Exit(1). + // Implementations may also call os.Exit() with a non-zero exit code. + Fatalf(format string, args ...interface{}) + // V reports whether verbosity level l is at least the requested verbose level. + V(l int) bool +} + +// DepthLoggerV2 logs at a specified call frame. If a LoggerV2 also implements +// DepthLoggerV2, the below functions will be called with the appropriate stack +// depth set for trivial functions the logger may ignore. +// This is a copy of the DepthLoggerV2 defined in the external grpclog package. +// It is defined here to avoid a circular dependency. +// +// Experimental +// +// Notice: This type is EXPERIMENTAL and may be changed or removed in a +// later release. +type DepthLoggerV2 interface { + // InfoDepth logs to INFO log at the specified depth. Arguments are handled in the manner of fmt.Print. + InfoDepth(depth int, args ...interface{}) + // WarningDepth logs to WARNING log at the specified depth. Arguments are handled in the manner of fmt.Print. + WarningDepth(depth int, args ...interface{}) + // ErrorDetph logs to ERROR log at the specified depth. Arguments are handled in the manner of fmt.Print. + ErrorDepth(depth int, args ...interface{}) + // FatalDepth logs to FATAL log at the specified depth. Arguments are handled in the manner of fmt.Print. + FatalDepth(depth int, args ...interface{}) +} diff --git a/vendor/google.golang.org/grpc/internal/grpclog/prefixLogger.go b/vendor/google.golang.org/grpc/internal/grpclog/prefixLogger.go new file mode 100644 index 000000000..82af70e96 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpclog/prefixLogger.go @@ -0,0 +1,81 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package grpclog + +import ( + "fmt" +) + +// PrefixLogger does logging with a prefix. +// +// Logging method on a nil logs without any prefix. +type PrefixLogger struct { + logger DepthLoggerV2 + prefix string +} + +// Infof does info logging. +func (pl *PrefixLogger) Infof(format string, args ...interface{}) { + if pl != nil { + // Handle nil, so the tests can pass in a nil logger. + format = pl.prefix + format + pl.logger.InfoDepth(1, fmt.Sprintf(format, args...)) + return + } + InfoDepth(1, fmt.Sprintf(format, args...)) +} + +// Warningf does warning logging. +func (pl *PrefixLogger) Warningf(format string, args ...interface{}) { + if pl != nil { + format = pl.prefix + format + pl.logger.WarningDepth(1, fmt.Sprintf(format, args...)) + return + } + WarningDepth(1, fmt.Sprintf(format, args...)) +} + +// Errorf does error logging. +func (pl *PrefixLogger) Errorf(format string, args ...interface{}) { + if pl != nil { + format = pl.prefix + format + pl.logger.ErrorDepth(1, fmt.Sprintf(format, args...)) + return + } + ErrorDepth(1, fmt.Sprintf(format, args...)) +} + +// Debugf does info logging at verbose level 2. +func (pl *PrefixLogger) Debugf(format string, args ...interface{}) { + if !Logger.V(2) { + return + } + if pl != nil { + // Handle nil, so the tests can pass in a nil logger. + format = pl.prefix + format + pl.logger.InfoDepth(1, fmt.Sprintf(format, args...)) + return + } + InfoDepth(1, fmt.Sprintf(format, args...)) +} + +// NewPrefixLogger creates a prefix logger with the given prefix. +func NewPrefixLogger(logger DepthLoggerV2, prefix string) *PrefixLogger { + return &PrefixLogger{logger: logger, prefix: prefix} +} diff --git a/vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go b/vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go new file mode 100644 index 000000000..200b115ca --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpcrand/grpcrand.go @@ -0,0 +1,56 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package grpcrand implements math/rand functions in a concurrent-safe way +// with a global random source, independent of math/rand's global source. +package grpcrand + +import ( + "math/rand" + "sync" + "time" +) + +var ( + r = rand.New(rand.NewSource(time.Now().UnixNano())) + mu sync.Mutex +) + +// Int63n implements rand.Int63n on the grpcrand global source. +func Int63n(n int64) int64 { + mu.Lock() + res := r.Int63n(n) + mu.Unlock() + return res +} + +// Intn implements rand.Intn on the grpcrand global source. +func Intn(n int) int { + mu.Lock() + res := r.Intn(n) + mu.Unlock() + return res +} + +// Float64 implements rand.Float64 on the grpcrand global source. +func Float64() float64 { + mu.Lock() + res := r.Float64() + mu.Unlock() + return res +} diff --git a/vendor/google.golang.org/grpc/internal/grpcsync/event.go b/vendor/google.golang.org/grpc/internal/grpcsync/event.go new file mode 100644 index 000000000..fbe697c37 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpcsync/event.go @@ -0,0 +1,61 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package grpcsync implements additional synchronization primitives built upon +// the sync package. +package grpcsync + +import ( + "sync" + "sync/atomic" +) + +// Event represents a one-time event that may occur in the future. +type Event struct { + fired int32 + c chan struct{} + o sync.Once +} + +// Fire causes e to complete. It is safe to call multiple times, and +// concurrently. It returns true iff this call to Fire caused the signaling +// channel returned by Done to close. +func (e *Event) Fire() bool { + ret := false + e.o.Do(func() { + atomic.StoreInt32(&e.fired, 1) + close(e.c) + ret = true + }) + return ret +} + +// Done returns a channel that will be closed when Fire is called. +func (e *Event) Done() <-chan struct{} { + return e.c +} + +// HasFired returns true if Fire has been called. +func (e *Event) HasFired() bool { + return atomic.LoadInt32(&e.fired) == 1 +} + +// NewEvent returns a new, ready-to-use Event. +func NewEvent() *Event { + return &Event{c: make(chan struct{})} +} diff --git a/vendor/google.golang.org/grpc/internal/grpcutil/encode_duration.go b/vendor/google.golang.org/grpc/internal/grpcutil/encode_duration.go new file mode 100644 index 000000000..b25b0baec --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpcutil/encode_duration.go @@ -0,0 +1,63 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package grpcutil + +import ( + "strconv" + "time" +) + +const maxTimeoutValue int64 = 100000000 - 1 + +// div does integer division and round-up the result. Note that this is +// equivalent to (d+r-1)/r but has less chance to overflow. +func div(d, r time.Duration) int64 { + if d%r > 0 { + return int64(d/r + 1) + } + return int64(d / r) +} + +// EncodeDuration encodes the duration to the format grpc-timeout header +// accepts. +// +// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests +func EncodeDuration(t time.Duration) string { + // TODO: This is simplistic and not bandwidth efficient. Improve it. + if t <= 0 { + return "0n" + } + if d := div(t, time.Nanosecond); d <= maxTimeoutValue { + return strconv.FormatInt(d, 10) + "n" + } + if d := div(t, time.Microsecond); d <= maxTimeoutValue { + return strconv.FormatInt(d, 10) + "u" + } + if d := div(t, time.Millisecond); d <= maxTimeoutValue { + return strconv.FormatInt(d, 10) + "m" + } + if d := div(t, time.Second); d <= maxTimeoutValue { + return strconv.FormatInt(d, 10) + "S" + } + if d := div(t, time.Minute); d <= maxTimeoutValue { + return strconv.FormatInt(d, 10) + "M" + } + // Note that maxTimeoutValue * time.Hour > MaxInt64. + return strconv.FormatInt(div(t, time.Hour), 10) + "H" +} diff --git a/vendor/google.golang.org/grpc/internal/grpcutil/metadata.go b/vendor/google.golang.org/grpc/internal/grpcutil/metadata.go new file mode 100644 index 000000000..6f22bd891 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpcutil/metadata.go @@ -0,0 +1,40 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package grpcutil + +import ( + "context" + + "google.golang.org/grpc/metadata" +) + +type mdExtraKey struct{} + +// WithExtraMetadata creates a new context with incoming md attached. +func WithExtraMetadata(ctx context.Context, md metadata.MD) context.Context { + return context.WithValue(ctx, mdExtraKey{}, md) +} + +// ExtraMetadata returns the incoming metadata in ctx if it exists. The +// returned MD should not be modified. Writing to it may cause races. +// Modification should be made to copies of the returned MD. +func ExtraMetadata(ctx context.Context) (md metadata.MD, ok bool) { + md, ok = ctx.Value(mdExtraKey{}).(metadata.MD) + return +} diff --git a/vendor/google.golang.org/grpc/internal/grpcutil/method.go b/vendor/google.golang.org/grpc/internal/grpcutil/method.go new file mode 100644 index 000000000..4e7475060 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpcutil/method.go @@ -0,0 +1,84 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package grpcutil + +import ( + "errors" + "strings" +) + +// ParseMethod splits service and method from the input. It expects format +// "/service/method". +// +func ParseMethod(methodName string) (service, method string, _ error) { + if !strings.HasPrefix(methodName, "/") { + return "", "", errors.New("invalid method name: should start with /") + } + methodName = methodName[1:] + + pos := strings.LastIndex(methodName, "/") + if pos < 0 { + return "", "", errors.New("invalid method name: suffix /method is missing") + } + return methodName[:pos], methodName[pos+1:], nil +} + +const baseContentType = "application/grpc" + +// ContentSubtype returns the content-subtype for the given content-type. The +// given content-type must be a valid content-type that starts with +// "application/grpc". A content-subtype will follow "application/grpc" after a +// "+" or ";". See +// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for +// more details. +// +// If contentType is not a valid content-type for gRPC, the boolean +// will be false, otherwise true. If content-type == "application/grpc", +// "application/grpc+", or "application/grpc;", the boolean will be true, +// but no content-subtype will be returned. +// +// contentType is assumed to be lowercase already. +func ContentSubtype(contentType string) (string, bool) { + if contentType == baseContentType { + return "", true + } + if !strings.HasPrefix(contentType, baseContentType) { + return "", false + } + // guaranteed since != baseContentType and has baseContentType prefix + switch contentType[len(baseContentType)] { + case '+', ';': + // this will return true for "application/grpc+" or "application/grpc;" + // which the previous validContentType function tested to be valid, so we + // just say that no content-subtype is specified in this case + return contentType[len(baseContentType)+1:], true + default: + return "", false + } +} + +// ContentType builds full content type with the given sub-type. +// +// contentSubtype is assumed to be lowercase +func ContentType(contentSubtype string) string { + if contentSubtype == "" { + return baseContentType + } + return baseContentType + "+" + contentSubtype +} diff --git a/vendor/google.golang.org/grpc/internal/grpcutil/target.go b/vendor/google.golang.org/grpc/internal/grpcutil/target.go new file mode 100644 index 000000000..80b33cdaf --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/grpcutil/target.go @@ -0,0 +1,55 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package grpcutil provides a bunch of utility functions to be used across the +// gRPC codebase. +package grpcutil + +import ( + "strings" + + "google.golang.org/grpc/resolver" +) + +// split2 returns the values from strings.SplitN(s, sep, 2). +// If sep is not found, it returns ("", "", false) instead. +func split2(s, sep string) (string, string, bool) { + spl := strings.SplitN(s, sep, 2) + if len(spl) < 2 { + return "", "", false + } + return spl[0], spl[1], true +} + +// ParseTarget splits target into a resolver.Target struct containing scheme, +// authority and endpoint. +// +// If target is not a valid scheme://authority/endpoint, it returns {Endpoint: +// target}. +func ParseTarget(target string) (ret resolver.Target) { + var ok bool + ret.Scheme, ret.Endpoint, ok = split2(target, "://") + if !ok { + return resolver.Target{Endpoint: target} + } + ret.Authority, ret.Endpoint, ok = split2(ret.Endpoint, "/") + if !ok { + return resolver.Target{Endpoint: target} + } + return ret +} diff --git a/vendor/google.golang.org/grpc/internal/internal.go b/vendor/google.golang.org/grpc/internal/internal.go new file mode 100644 index 000000000..716d92800 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/internal.go @@ -0,0 +1,81 @@ +/* + * Copyright 2016 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package internal contains gRPC-internal code, to avoid polluting +// the godoc of the top-level grpc package. It must not import any grpc +// symbols to avoid circular dependencies. +package internal + +import ( + "context" + "time" + + "google.golang.org/grpc/connectivity" + "google.golang.org/grpc/serviceconfig" +) + +var ( + // WithHealthCheckFunc is set by dialoptions.go + WithHealthCheckFunc interface{} // func (HealthChecker) DialOption + // HealthCheckFunc is used to provide client-side LB channel health checking + HealthCheckFunc HealthChecker + // BalancerUnregister is exported by package balancer to unregister a balancer. + BalancerUnregister func(name string) + // KeepaliveMinPingTime is the minimum ping interval. This must be 10s by + // default, but tests may wish to set it lower for convenience. + KeepaliveMinPingTime = 10 * time.Second + // NewRequestInfoContext creates a new context based on the argument context attaching + // the passed in RequestInfo to the new context. + NewRequestInfoContext interface{} // func(context.Context, credentials.RequestInfo) context.Context + // NewClientHandshakeInfoContext returns a copy of the input context with + // the passed in ClientHandshakeInfo struct added to it. + NewClientHandshakeInfoContext interface{} // func(context.Context, credentials.ClientHandshakeInfo) context.Context + // ParseServiceConfigForTesting is for creating a fake + // ClientConn for resolver testing only + ParseServiceConfigForTesting interface{} // func(string) *serviceconfig.ParseResult + // EqualServiceConfigForTesting is for testing service config generation and + // parsing. Both a and b should be returned by ParseServiceConfigForTesting. + // This function compares the config without rawJSON stripped, in case the + // there's difference in white space. + EqualServiceConfigForTesting func(a, b serviceconfig.Config) bool + // GetCertificateProviderBuilder returns the registered builder for the + // given name. This is set by package certprovider for use from xDS + // bootstrap code while parsing certificate provider configs in the + // bootstrap file. + GetCertificateProviderBuilder interface{} // func(string) certprovider.Builder +) + +// HealthChecker defines the signature of the client-side LB channel health checking function. +// +// The implementation is expected to create a health checking RPC stream by +// calling newStream(), watch for the health status of serviceName, and report +// it's health back by calling setConnectivityState(). +// +// The health checking protocol is defined at: +// https://github.com/grpc/grpc/blob/master/doc/health-checking.md +type HealthChecker func(ctx context.Context, newStream func(string) (interface{}, error), setConnectivityState func(connectivity.State, error), serviceName string) error + +const ( + // CredsBundleModeFallback switches GoogleDefaultCreds to fallback mode. + CredsBundleModeFallback = "fallback" + // CredsBundleModeBalancer switches GoogleDefaultCreds to grpclb balancer + // mode. + CredsBundleModeBalancer = "balancer" + // CredsBundleModeBackendFromBalancer switches GoogleDefaultCreds to mode + // that supports backend returned by grpclb balancer. + CredsBundleModeBackendFromBalancer = "backend-from-balancer" +) diff --git a/vendor/google.golang.org/grpc/internal/resolver/dns/dns_resolver.go b/vendor/google.golang.org/grpc/internal/resolver/dns/dns_resolver.go new file mode 100644 index 000000000..304235566 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/resolver/dns/dns_resolver.go @@ -0,0 +1,446 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package dns implements a dns resolver to be installed as the default resolver +// in grpc. +package dns + +import ( + "context" + "encoding/json" + "errors" + "fmt" + "net" + "os" + "strconv" + "strings" + "sync" + "time" + + grpclbstate "google.golang.org/grpc/balancer/grpclb/state" + "google.golang.org/grpc/grpclog" + "google.golang.org/grpc/internal/envconfig" + "google.golang.org/grpc/internal/grpcrand" + "google.golang.org/grpc/resolver" + "google.golang.org/grpc/serviceconfig" +) + +// EnableSRVLookups controls whether the DNS resolver attempts to fetch gRPCLB +// addresses from SRV records. Must not be changed after init time. +var EnableSRVLookups = false + +var logger = grpclog.Component("dns") + +func init() { + resolver.Register(NewBuilder()) +} + +const ( + defaultPort = "443" + defaultDNSSvrPort = "53" + golang = "GO" + // txtPrefix is the prefix string to be prepended to the host name for txt record lookup. + txtPrefix = "_grpc_config." + // In DNS, service config is encoded in a TXT record via the mechanism + // described in RFC-1464 using the attribute name grpc_config. + txtAttribute = "grpc_config=" +) + +var ( + errMissingAddr = errors.New("dns resolver: missing address") + + // Addresses ending with a colon that is supposed to be the separator + // between host and port is not allowed. E.g. "::" is a valid address as + // it is an IPv6 address (host only) and "[::]:" is invalid as it ends with + // a colon as the host and port separator + errEndsWithColon = errors.New("dns resolver: missing port after port-separator colon") +) + +var ( + defaultResolver netResolver = net.DefaultResolver + // To prevent excessive re-resolution, we enforce a rate limit on DNS + // resolution requests. + minDNSResRate = 30 * time.Second +) + +var customAuthorityDialler = func(authority string) func(ctx context.Context, network, address string) (net.Conn, error) { + return func(ctx context.Context, network, address string) (net.Conn, error) { + var dialer net.Dialer + return dialer.DialContext(ctx, network, authority) + } +} + +var customAuthorityResolver = func(authority string) (netResolver, error) { + host, port, err := parseTarget(authority, defaultDNSSvrPort) + if err != nil { + return nil, err + } + + authorityWithPort := net.JoinHostPort(host, port) + + return &net.Resolver{ + PreferGo: true, + Dial: customAuthorityDialler(authorityWithPort), + }, nil +} + +// NewBuilder creates a dnsBuilder which is used to factory DNS resolvers. +func NewBuilder() resolver.Builder { + return &dnsBuilder{} +} + +type dnsBuilder struct{} + +// Build creates and starts a DNS resolver that watches the name resolution of the target. +func (b *dnsBuilder) Build(target resolver.Target, cc resolver.ClientConn, opts resolver.BuildOptions) (resolver.Resolver, error) { + host, port, err := parseTarget(target.Endpoint, defaultPort) + if err != nil { + return nil, err + } + + // IP address. + if ipAddr, ok := formatIP(host); ok { + addr := []resolver.Address{{Addr: ipAddr + ":" + port}} + cc.UpdateState(resolver.State{Addresses: addr}) + return deadResolver{}, nil + } + + // DNS address (non-IP). + ctx, cancel := context.WithCancel(context.Background()) + d := &dnsResolver{ + host: host, + port: port, + ctx: ctx, + cancel: cancel, + cc: cc, + rn: make(chan struct{}, 1), + disableServiceConfig: opts.DisableServiceConfig, + } + + if target.Authority == "" { + d.resolver = defaultResolver + } else { + d.resolver, err = customAuthorityResolver(target.Authority) + if err != nil { + return nil, err + } + } + + d.wg.Add(1) + go d.watcher() + d.ResolveNow(resolver.ResolveNowOptions{}) + return d, nil +} + +// Scheme returns the naming scheme of this resolver builder, which is "dns". +func (b *dnsBuilder) Scheme() string { + return "dns" +} + +type netResolver interface { + LookupHost(ctx context.Context, host string) (addrs []string, err error) + LookupSRV(ctx context.Context, service, proto, name string) (cname string, addrs []*net.SRV, err error) + LookupTXT(ctx context.Context, name string) (txts []string, err error) +} + +// deadResolver is a resolver that does nothing. +type deadResolver struct{} + +func (deadResolver) ResolveNow(resolver.ResolveNowOptions) {} + +func (deadResolver) Close() {} + +// dnsResolver watches for the name resolution update for a non-IP target. +type dnsResolver struct { + host string + port string + resolver netResolver + ctx context.Context + cancel context.CancelFunc + cc resolver.ClientConn + // rn channel is used by ResolveNow() to force an immediate resolution of the target. + rn chan struct{} + // wg is used to enforce Close() to return after the watcher() goroutine has finished. + // Otherwise, data race will be possible. [Race Example] in dns_resolver_test we + // replace the real lookup functions with mocked ones to facilitate testing. + // If Close() doesn't wait for watcher() goroutine finishes, race detector sometimes + // will warns lookup (READ the lookup function pointers) inside watcher() goroutine + // has data race with replaceNetFunc (WRITE the lookup function pointers). + wg sync.WaitGroup + disableServiceConfig bool +} + +// ResolveNow invoke an immediate resolution of the target that this dnsResolver watches. +func (d *dnsResolver) ResolveNow(resolver.ResolveNowOptions) { + select { + case d.rn <- struct{}{}: + default: + } +} + +// Close closes the dnsResolver. +func (d *dnsResolver) Close() { + d.cancel() + d.wg.Wait() +} + +func (d *dnsResolver) watcher() { + defer d.wg.Done() + for { + select { + case <-d.ctx.Done(): + return + case <-d.rn: + } + + state, err := d.lookup() + if err != nil { + d.cc.ReportError(err) + } else { + d.cc.UpdateState(*state) + } + + // Sleep to prevent excessive re-resolutions. Incoming resolution requests + // will be queued in d.rn. + t := time.NewTimer(minDNSResRate) + select { + case <-t.C: + case <-d.ctx.Done(): + t.Stop() + return + } + } +} + +func (d *dnsResolver) lookupSRV() ([]resolver.Address, error) { + if !EnableSRVLookups { + return nil, nil + } + var newAddrs []resolver.Address + _, srvs, err := d.resolver.LookupSRV(d.ctx, "grpclb", "tcp", d.host) + if err != nil { + err = handleDNSError(err, "SRV") // may become nil + return nil, err + } + for _, s := range srvs { + lbAddrs, err := d.resolver.LookupHost(d.ctx, s.Target) + if err != nil { + err = handleDNSError(err, "A") // may become nil + if err == nil { + // If there are other SRV records, look them up and ignore this + // one that does not exist. + continue + } + return nil, err + } + for _, a := range lbAddrs { + ip, ok := formatIP(a) + if !ok { + return nil, fmt.Errorf("dns: error parsing A record IP address %v", a) + } + addr := ip + ":" + strconv.Itoa(int(s.Port)) + newAddrs = append(newAddrs, resolver.Address{Addr: addr, ServerName: s.Target}) + } + } + return newAddrs, nil +} + +var filterError = func(err error) error { + if dnsErr, ok := err.(*net.DNSError); ok && !dnsErr.IsTimeout && !dnsErr.IsTemporary { + // Timeouts and temporary errors should be communicated to gRPC to + // attempt another DNS query (with backoff). Other errors should be + // suppressed (they may represent the absence of a TXT record). + return nil + } + return err +} + +func handleDNSError(err error, lookupType string) error { + err = filterError(err) + if err != nil { + err = fmt.Errorf("dns: %v record lookup error: %v", lookupType, err) + logger.Info(err) + } + return err +} + +func (d *dnsResolver) lookupTXT() *serviceconfig.ParseResult { + ss, err := d.resolver.LookupTXT(d.ctx, txtPrefix+d.host) + if err != nil { + if envconfig.TXTErrIgnore { + return nil + } + if err = handleDNSError(err, "TXT"); err != nil { + return &serviceconfig.ParseResult{Err: err} + } + return nil + } + var res string + for _, s := range ss { + res += s + } + + // TXT record must have "grpc_config=" attribute in order to be used as service config. + if !strings.HasPrefix(res, txtAttribute) { + logger.Warningf("dns: TXT record %v missing %v attribute", res, txtAttribute) + // This is not an error; it is the equivalent of not having a service config. + return nil + } + sc := canaryingSC(strings.TrimPrefix(res, txtAttribute)) + return d.cc.ParseServiceConfig(sc) +} + +func (d *dnsResolver) lookupHost() ([]resolver.Address, error) { + var newAddrs []resolver.Address + addrs, err := d.resolver.LookupHost(d.ctx, d.host) + if err != nil { + err = handleDNSError(err, "A") + return nil, err + } + for _, a := range addrs { + ip, ok := formatIP(a) + if !ok { + return nil, fmt.Errorf("dns: error parsing A record IP address %v", a) + } + addr := ip + ":" + d.port + newAddrs = append(newAddrs, resolver.Address{Addr: addr}) + } + return newAddrs, nil +} + +func (d *dnsResolver) lookup() (*resolver.State, error) { + srv, srvErr := d.lookupSRV() + addrs, hostErr := d.lookupHost() + if hostErr != nil && (srvErr != nil || len(srv) == 0) { + return nil, hostErr + } + + state := resolver.State{Addresses: addrs} + if len(srv) > 0 { + state = grpclbstate.Set(state, &grpclbstate.State{BalancerAddresses: srv}) + } + if !d.disableServiceConfig { + state.ServiceConfig = d.lookupTXT() + } + return &state, nil +} + +// formatIP returns ok = false if addr is not a valid textual representation of an IP address. +// If addr is an IPv4 address, return the addr and ok = true. +// If addr is an IPv6 address, return the addr enclosed in square brackets and ok = true. +func formatIP(addr string) (addrIP string, ok bool) { + ip := net.ParseIP(addr) + if ip == nil { + return "", false + } + if ip.To4() != nil { + return addr, true + } + return "[" + addr + "]", true +} + +// parseTarget takes the user input target string and default port, returns formatted host and port info. +// If target doesn't specify a port, set the port to be the defaultPort. +// If target is in IPv6 format and host-name is enclosed in square brackets, brackets +// are stripped when setting the host. +// examples: +// target: "www.google.com" defaultPort: "443" returns host: "www.google.com", port: "443" +// target: "ipv4-host:80" defaultPort: "443" returns host: "ipv4-host", port: "80" +// target: "[ipv6-host]" defaultPort: "443" returns host: "ipv6-host", port: "443" +// target: ":80" defaultPort: "443" returns host: "localhost", port: "80" +func parseTarget(target, defaultPort string) (host, port string, err error) { + if target == "" { + return "", "", errMissingAddr + } + if ip := net.ParseIP(target); ip != nil { + // target is an IPv4 or IPv6(without brackets) address + return target, defaultPort, nil + } + if host, port, err = net.SplitHostPort(target); err == nil { + if port == "" { + // If the port field is empty (target ends with colon), e.g. "[::1]:", this is an error. + return "", "", errEndsWithColon + } + // target has port, i.e ipv4-host:port, [ipv6-host]:port, host-name:port + if host == "" { + // Keep consistent with net.Dial(): If the host is empty, as in ":80", the local system is assumed. + host = "localhost" + } + return host, port, nil + } + if host, port, err = net.SplitHostPort(target + ":" + defaultPort); err == nil { + // target doesn't have port + return host, port, nil + } + return "", "", fmt.Errorf("invalid target address %v, error info: %v", target, err) +} + +type rawChoice struct { + ClientLanguage *[]string `json:"clientLanguage,omitempty"` + Percentage *int `json:"percentage,omitempty"` + ClientHostName *[]string `json:"clientHostName,omitempty"` + ServiceConfig *json.RawMessage `json:"serviceConfig,omitempty"` +} + +func containsString(a *[]string, b string) bool { + if a == nil { + return true + } + for _, c := range *a { + if c == b { + return true + } + } + return false +} + +func chosenByPercentage(a *int) bool { + if a == nil { + return true + } + return grpcrand.Intn(100)+1 <= *a +} + +func canaryingSC(js string) string { + if js == "" { + return "" + } + var rcs []rawChoice + err := json.Unmarshal([]byte(js), &rcs) + if err != nil { + logger.Warningf("dns: error parsing service config json: %v", err) + return "" + } + cliHostname, err := os.Hostname() + if err != nil { + logger.Warningf("dns: error getting client hostname: %v", err) + return "" + } + var sc string + for _, c := range rcs { + if !containsString(c.ClientLanguage, golang) || + !chosenByPercentage(c.Percentage) || + !containsString(c.ClientHostName, cliHostname) || + c.ServiceConfig == nil { + continue + } + sc = string(*c.ServiceConfig) + break + } + return sc +} diff --git a/vendor/google.golang.org/grpc/internal/resolver/dns/go113.go b/vendor/google.golang.org/grpc/internal/resolver/dns/go113.go new file mode 100644 index 000000000..8783a8cf8 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/resolver/dns/go113.go @@ -0,0 +1,33 @@ +// +build go1.13 + +/* + * + * Copyright 2019 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package dns + +import "net" + +func init() { + filterError = func(err error) error { + if dnsErr, ok := err.(*net.DNSError); ok && dnsErr.IsNotFound { + // The name does not exist; not an error. + return nil + } + return err + } +} diff --git a/vendor/google.golang.org/grpc/internal/resolver/passthrough/passthrough.go b/vendor/google.golang.org/grpc/internal/resolver/passthrough/passthrough.go new file mode 100644 index 000000000..520d9229e --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/resolver/passthrough/passthrough.go @@ -0,0 +1,57 @@ +/* + * + * Copyright 2017 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package passthrough implements a pass-through resolver. It sends the target +// name without scheme back to gRPC as resolved address. +package passthrough + +import "google.golang.org/grpc/resolver" + +const scheme = "passthrough" + +type passthroughBuilder struct{} + +func (*passthroughBuilder) Build(target resolver.Target, cc resolver.ClientConn, opts resolver.BuildOptions) (resolver.Resolver, error) { + r := &passthroughResolver{ + target: target, + cc: cc, + } + r.start() + return r, nil +} + +func (*passthroughBuilder) Scheme() string { + return scheme +} + +type passthroughResolver struct { + target resolver.Target + cc resolver.ClientConn +} + +func (r *passthroughResolver) start() { + r.cc.UpdateState(resolver.State{Addresses: []resolver.Address{{Addr: r.target.Endpoint}}}) +} + +func (*passthroughResolver) ResolveNow(o resolver.ResolveNowOptions) {} + +func (*passthroughResolver) Close() {} + +func init() { + resolver.Register(&passthroughBuilder{}) +} diff --git a/vendor/google.golang.org/grpc/internal/serviceconfig/serviceconfig.go b/vendor/google.golang.org/grpc/internal/serviceconfig/serviceconfig.go new file mode 100644 index 000000000..af3e2b5f7 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/serviceconfig/serviceconfig.go @@ -0,0 +1,106 @@ +/* + * + * Copyright 2020 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package serviceconfig contains utility functions to parse service config. +package serviceconfig + +import ( + "encoding/json" + "fmt" + + "google.golang.org/grpc/balancer" + "google.golang.org/grpc/grpclog" + externalserviceconfig "google.golang.org/grpc/serviceconfig" +) + +var logger = grpclog.Component("core") + +// BalancerConfig wraps the name and config associated with one load balancing +// policy. It corresponds to a single entry of the loadBalancingConfig field +// from ServiceConfig. +// +// It implements the json.Unmarshaler interface. +// +// https://github.com/grpc/grpc-proto/blob/54713b1e8bc6ed2d4f25fb4dff527842150b91b2/grpc/service_config/service_config.proto#L247 +type BalancerConfig struct { + Name string + Config externalserviceconfig.LoadBalancingConfig +} + +type intermediateBalancerConfig []map[string]json.RawMessage + +// UnmarshalJSON implements the json.Unmarshaler interface. +// +// ServiceConfig contains a list of loadBalancingConfigs, each with a name and +// config. This method iterates through that list in order, and stops at the +// first policy that is supported. +// - If the config for the first supported policy is invalid, the whole service +// config is invalid. +// - If the list doesn't contain any supported policy, the whole service config +// is invalid. +func (bc *BalancerConfig) UnmarshalJSON(b []byte) error { + var ir intermediateBalancerConfig + err := json.Unmarshal(b, &ir) + if err != nil { + return err + } + + for i, lbcfg := range ir { + if len(lbcfg) != 1 { + return fmt.Errorf("invalid loadBalancingConfig: entry %v does not contain exactly 1 policy/config pair: %q", i, lbcfg) + } + + var ( + name string + jsonCfg json.RawMessage + ) + // Get the key:value pair from the map. We have already made sure that + // the map contains a single entry. + for name, jsonCfg = range lbcfg { + } + + builder := balancer.Get(name) + if builder == nil { + // If the balancer is not registered, move on to the next config. + // This is not an error. + continue + } + bc.Name = name + + parser, ok := builder.(balancer.ConfigParser) + if !ok { + if string(jsonCfg) != "{}" { + logger.Warningf("non-empty balancer configuration %q, but balancer does not implement ParseConfig", string(jsonCfg)) + } + // Stop at this, though the builder doesn't support parsing config. + return nil + } + + cfg, err := parser.ParseConfig(jsonCfg) + if err != nil { + return fmt.Errorf("error parsing loadBalancingConfig for policy %q: %v", name, err) + } + bc.Config = cfg + return nil + } + // This is reached when the for loop iterates over all entries, but didn't + // return. This means we had a loadBalancingConfig slice but did not + // encounter a registered policy. The config is considered invalid in this + // case. + return fmt.Errorf("invalid loadBalancingConfig: no supported policies found") +} diff --git a/vendor/google.golang.org/grpc/internal/status/status.go b/vendor/google.golang.org/grpc/internal/status/status.go index 681260692..710223b8d 100644 --- a/vendor/google.golang.org/grpc/internal/status/status.go +++ b/vendor/google.golang.org/grpc/internal/status/status.go @@ -97,7 +97,7 @@ func (s *Status) Err() error { if s.Code() == codes.OK { return nil } - return (*Error)(s.Proto()) + return &Error{e: s.Proto()} } // WithDetails returns a new status with the provided details messages appended to the status. @@ -136,26 +136,27 @@ func (s *Status) Details() []interface{} { return details } -// Error is an alias of a status proto. It implements error and Status, -// and a nil Error should never be returned by this package. -type Error spb.Status +// Error wraps a pointer of a status proto. It implements error and Status, +// and a nil *Error should never be returned by this package. +type Error struct { + e *spb.Status +} -func (se *Error) Error() string { - p := (*spb.Status)(se) - return fmt.Sprintf("rpc error: code = %s desc = %s", codes.Code(p.GetCode()), p.GetMessage()) +func (e *Error) Error() string { + return fmt.Sprintf("rpc error: code = %s desc = %s", codes.Code(e.e.GetCode()), e.e.GetMessage()) } // GRPCStatus returns the Status represented by se. -func (se *Error) GRPCStatus() *Status { - return FromProto((*spb.Status)(se)) +func (e *Error) GRPCStatus() *Status { + return FromProto(e.e) } // Is implements future error.Is functionality. // A Error is equivalent if the code and message are identical. -func (se *Error) Is(target error) bool { +func (e *Error) Is(target error) bool { tse, ok := target.(*Error) if !ok { return false } - return proto.Equal((*spb.Status)(se), (*spb.Status)(tse)) + return proto.Equal(e.e, tse.e) } diff --git a/vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go b/vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go new file mode 100644 index 000000000..2fdcb76e6 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/syscall/syscall_linux.go @@ -0,0 +1,116 @@ +// +build !appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package syscall provides functionalities that grpc uses to get low-level operating system +// stats/info. +package syscall + +import ( + "fmt" + "net" + "syscall" + "time" + + "golang.org/x/sys/unix" + "google.golang.org/grpc/grpclog" +) + +var logger = grpclog.Component("core") + +// GetCPUTime returns the how much CPU time has passed since the start of this process. +func GetCPUTime() int64 { + var ts unix.Timespec + if err := unix.ClockGettime(unix.CLOCK_PROCESS_CPUTIME_ID, &ts); err != nil { + logger.Fatal(err) + } + return ts.Nano() +} + +// Rusage is an alias for syscall.Rusage under linux environment. +type Rusage syscall.Rusage + +// GetRusage returns the resource usage of current process. +func GetRusage() (rusage *Rusage) { + rusage = new(Rusage) + syscall.Getrusage(syscall.RUSAGE_SELF, (*syscall.Rusage)(rusage)) + return +} + +// CPUTimeDiff returns the differences of user CPU time and system CPU time used +// between two Rusage structs. +func CPUTimeDiff(first *Rusage, latest *Rusage) (float64, float64) { + f := (*syscall.Rusage)(first) + l := (*syscall.Rusage)(latest) + var ( + utimeDiffs = l.Utime.Sec - f.Utime.Sec + utimeDiffus = l.Utime.Usec - f.Utime.Usec + stimeDiffs = l.Stime.Sec - f.Stime.Sec + stimeDiffus = l.Stime.Usec - f.Stime.Usec + ) + + uTimeElapsed := float64(utimeDiffs) + float64(utimeDiffus)*1.0e-6 + sTimeElapsed := float64(stimeDiffs) + float64(stimeDiffus)*1.0e-6 + + return uTimeElapsed, sTimeElapsed +} + +// SetTCPUserTimeout sets the TCP user timeout on a connection's socket +func SetTCPUserTimeout(conn net.Conn, timeout time.Duration) error { + tcpconn, ok := conn.(*net.TCPConn) + if !ok { + // not a TCP connection. exit early + return nil + } + rawConn, err := tcpconn.SyscallConn() + if err != nil { + return fmt.Errorf("error getting raw connection: %v", err) + } + err = rawConn.Control(func(fd uintptr) { + err = syscall.SetsockoptInt(int(fd), syscall.IPPROTO_TCP, unix.TCP_USER_TIMEOUT, int(timeout/time.Millisecond)) + }) + if err != nil { + return fmt.Errorf("error setting option on socket: %v", err) + } + + return nil +} + +// GetTCPUserTimeout gets the TCP user timeout on a connection's socket +func GetTCPUserTimeout(conn net.Conn) (opt int, err error) { + tcpconn, ok := conn.(*net.TCPConn) + if !ok { + err = fmt.Errorf("conn is not *net.TCPConn. got %T", conn) + return + } + rawConn, err := tcpconn.SyscallConn() + if err != nil { + err = fmt.Errorf("error getting raw connection: %v", err) + return + } + err = rawConn.Control(func(fd uintptr) { + opt, err = syscall.GetsockoptInt(int(fd), syscall.IPPROTO_TCP, unix.TCP_USER_TIMEOUT) + }) + if err != nil { + err = fmt.Errorf("error getting option on socket: %v", err) + return + } + + return +} diff --git a/vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go b/vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go new file mode 100644 index 000000000..adae60d65 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/syscall/syscall_nonlinux.go @@ -0,0 +1,76 @@ +// +build !linux appengine + +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package syscall provides functionalities that grpc uses to get low-level +// operating system stats/info. +package syscall + +import ( + "net" + "sync" + "time" + + "google.golang.org/grpc/grpclog" +) + +var once sync.Once +var logger = grpclog.Component("core") + +func log() { + once.Do(func() { + logger.Info("CPU time info is unavailable on non-linux or appengine environment.") + }) +} + +// GetCPUTime returns the how much CPU time has passed since the start of this process. +// It always returns 0 under non-linux or appengine environment. +func GetCPUTime() int64 { + log() + return 0 +} + +// Rusage is an empty struct under non-linux or appengine environment. +type Rusage struct{} + +// GetRusage is a no-op function under non-linux or appengine environment. +func GetRusage() (rusage *Rusage) { + log() + return nil +} + +// CPUTimeDiff returns the differences of user CPU time and system CPU time used +// between two Rusage structs. It a no-op function for non-linux or appengine environment. +func CPUTimeDiff(first *Rusage, latest *Rusage) (float64, float64) { + log() + return 0, 0 +} + +// SetTCPUserTimeout is a no-op function under non-linux or appengine environments +func SetTCPUserTimeout(conn net.Conn, timeout time.Duration) error { + log() + return nil +} + +// GetTCPUserTimeout is a no-op function under non-linux or appengine environments +// a negative return value indicates the operation is not supported +func GetTCPUserTimeout(conn net.Conn) (int, error) { + log() + return -1, nil +} diff --git a/vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go b/vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go new file mode 100644 index 000000000..070680edb --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/bdp_estimator.go @@ -0,0 +1,141 @@ +/* + * + * Copyright 2017 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "sync" + "time" +) + +const ( + // bdpLimit is the maximum value the flow control windows will be increased + // to. TCP typically limits this to 4MB, but some systems go up to 16MB. + // Since this is only a limit, it is safe to make it optimistic. + bdpLimit = (1 << 20) * 16 + // alpha is a constant factor used to keep a moving average + // of RTTs. + alpha = 0.9 + // If the current bdp sample is greater than or equal to + // our beta * our estimated bdp and the current bandwidth + // sample is the maximum bandwidth observed so far, we + // increase our bbp estimate by a factor of gamma. + beta = 0.66 + // To put our bdp to be smaller than or equal to twice the real BDP, + // we should multiply our current sample with 4/3, however to round things out + // we use 2 as the multiplication factor. + gamma = 2 +) + +// Adding arbitrary data to ping so that its ack can be identified. +// Easter-egg: what does the ping message say? +var bdpPing = &ping{data: [8]byte{2, 4, 16, 16, 9, 14, 7, 7}} + +type bdpEstimator struct { + // sentAt is the time when the ping was sent. + sentAt time.Time + + mu sync.Mutex + // bdp is the current bdp estimate. + bdp uint32 + // sample is the number of bytes received in one measurement cycle. + sample uint32 + // bwMax is the maximum bandwidth noted so far (bytes/sec). + bwMax float64 + // bool to keep track of the beginning of a new measurement cycle. + isSent bool + // Callback to update the window sizes. + updateFlowControl func(n uint32) + // sampleCount is the number of samples taken so far. + sampleCount uint64 + // round trip time (seconds) + rtt float64 +} + +// timesnap registers the time bdp ping was sent out so that +// network rtt can be calculated when its ack is received. +// It is called (by controller) when the bdpPing is +// being written on the wire. +func (b *bdpEstimator) timesnap(d [8]byte) { + if bdpPing.data != d { + return + } + b.sentAt = time.Now() +} + +// add adds bytes to the current sample for calculating bdp. +// It returns true only if a ping must be sent. This can be used +// by the caller (handleData) to make decision about batching +// a window update with it. +func (b *bdpEstimator) add(n uint32) bool { + b.mu.Lock() + defer b.mu.Unlock() + if b.bdp == bdpLimit { + return false + } + if !b.isSent { + b.isSent = true + b.sample = n + b.sentAt = time.Time{} + b.sampleCount++ + return true + } + b.sample += n + return false +} + +// calculate is called when an ack for a bdp ping is received. +// Here we calculate the current bdp and bandwidth sample and +// decide if the flow control windows should go up. +func (b *bdpEstimator) calculate(d [8]byte) { + // Check if the ping acked for was the bdp ping. + if bdpPing.data != d { + return + } + b.mu.Lock() + rttSample := time.Since(b.sentAt).Seconds() + if b.sampleCount < 10 { + // Bootstrap rtt with an average of first 10 rtt samples. + b.rtt += (rttSample - b.rtt) / float64(b.sampleCount) + } else { + // Heed to the recent past more. + b.rtt += (rttSample - b.rtt) * float64(alpha) + } + b.isSent = false + // The number of bytes accumulated so far in the sample is smaller + // than or equal to 1.5 times the real BDP on a saturated connection. + bwCurrent := float64(b.sample) / (b.rtt * float64(1.5)) + if bwCurrent > b.bwMax { + b.bwMax = bwCurrent + } + // If the current sample (which is smaller than or equal to the 1.5 times the real BDP) is + // greater than or equal to 2/3rd our perceived bdp AND this is the maximum bandwidth seen so far, we + // should update our perception of the network BDP. + if float64(b.sample) >= beta*float64(b.bdp) && bwCurrent == b.bwMax && b.bdp != bdpLimit { + sampleFloat := float64(b.sample) + b.bdp = uint32(gamma * sampleFloat) + if b.bdp > bdpLimit { + b.bdp = bdpLimit + } + bdp := b.bdp + b.mu.Unlock() + b.updateFlowControl(bdp) + return + } + b.mu.Unlock() +} diff --git a/vendor/google.golang.org/grpc/internal/transport/controlbuf.go b/vendor/google.golang.org/grpc/internal/transport/controlbuf.go new file mode 100644 index 000000000..40ef23923 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/controlbuf.go @@ -0,0 +1,942 @@ +/* + * + * Copyright 2014 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "bytes" + "fmt" + "runtime" + "sync" + "sync/atomic" + + "golang.org/x/net/http2" + "golang.org/x/net/http2/hpack" +) + +var updateHeaderTblSize = func(e *hpack.Encoder, v uint32) { + e.SetMaxDynamicTableSizeLimit(v) +} + +type itemNode struct { + it interface{} + next *itemNode +} + +type itemList struct { + head *itemNode + tail *itemNode +} + +func (il *itemList) enqueue(i interface{}) { + n := &itemNode{it: i} + if il.tail == nil { + il.head, il.tail = n, n + return + } + il.tail.next = n + il.tail = n +} + +// peek returns the first item in the list without removing it from the +// list. +func (il *itemList) peek() interface{} { + return il.head.it +} + +func (il *itemList) dequeue() interface{} { + if il.head == nil { + return nil + } + i := il.head.it + il.head = il.head.next + if il.head == nil { + il.tail = nil + } + return i +} + +func (il *itemList) dequeueAll() *itemNode { + h := il.head + il.head, il.tail = nil, nil + return h +} + +func (il *itemList) isEmpty() bool { + return il.head == nil +} + +// The following defines various control items which could flow through +// the control buffer of transport. They represent different aspects of +// control tasks, e.g., flow control, settings, streaming resetting, etc. + +// maxQueuedTransportResponseFrames is the most queued "transport response" +// frames we will buffer before preventing new reads from occurring on the +// transport. These are control frames sent in response to client requests, +// such as RST_STREAM due to bad headers or settings acks. +const maxQueuedTransportResponseFrames = 50 + +type cbItem interface { + isTransportResponseFrame() bool +} + +// registerStream is used to register an incoming stream with loopy writer. +type registerStream struct { + streamID uint32 + wq *writeQuota +} + +func (*registerStream) isTransportResponseFrame() bool { return false } + +// headerFrame is also used to register stream on the client-side. +type headerFrame struct { + streamID uint32 + hf []hpack.HeaderField + endStream bool // Valid on server side. + initStream func(uint32) error // Used only on the client side. + onWrite func() + wq *writeQuota // write quota for the stream created. + cleanup *cleanupStream // Valid on the server side. + onOrphaned func(error) // Valid on client-side +} + +func (h *headerFrame) isTransportResponseFrame() bool { + return h.cleanup != nil && h.cleanup.rst // Results in a RST_STREAM +} + +type cleanupStream struct { + streamID uint32 + rst bool + rstCode http2.ErrCode + onWrite func() +} + +func (c *cleanupStream) isTransportResponseFrame() bool { return c.rst } // Results in a RST_STREAM + +type dataFrame struct { + streamID uint32 + endStream bool + h []byte + d []byte + // onEachWrite is called every time + // a part of d is written out. + onEachWrite func() +} + +func (*dataFrame) isTransportResponseFrame() bool { return false } + +type incomingWindowUpdate struct { + streamID uint32 + increment uint32 +} + +func (*incomingWindowUpdate) isTransportResponseFrame() bool { return false } + +type outgoingWindowUpdate struct { + streamID uint32 + increment uint32 +} + +func (*outgoingWindowUpdate) isTransportResponseFrame() bool { + return false // window updates are throttled by thresholds +} + +type incomingSettings struct { + ss []http2.Setting +} + +func (*incomingSettings) isTransportResponseFrame() bool { return true } // Results in a settings ACK + +type outgoingSettings struct { + ss []http2.Setting +} + +func (*outgoingSettings) isTransportResponseFrame() bool { return false } + +type incomingGoAway struct { +} + +func (*incomingGoAway) isTransportResponseFrame() bool { return false } + +type goAway struct { + code http2.ErrCode + debugData []byte + headsUp bool + closeConn bool +} + +func (*goAway) isTransportResponseFrame() bool { return false } + +type ping struct { + ack bool + data [8]byte +} + +func (*ping) isTransportResponseFrame() bool { return true } + +type outFlowControlSizeRequest struct { + resp chan uint32 +} + +func (*outFlowControlSizeRequest) isTransportResponseFrame() bool { return false } + +type outStreamState int + +const ( + active outStreamState = iota + empty + waitingOnStreamQuota +) + +type outStream struct { + id uint32 + state outStreamState + itl *itemList + bytesOutStanding int + wq *writeQuota + + next *outStream + prev *outStream +} + +func (s *outStream) deleteSelf() { + if s.prev != nil { + s.prev.next = s.next + } + if s.next != nil { + s.next.prev = s.prev + } + s.next, s.prev = nil, nil +} + +type outStreamList struct { + // Following are sentinel objects that mark the + // beginning and end of the list. They do not + // contain any item lists. All valid objects are + // inserted in between them. + // This is needed so that an outStream object can + // deleteSelf() in O(1) time without knowing which + // list it belongs to. + head *outStream + tail *outStream +} + +func newOutStreamList() *outStreamList { + head, tail := new(outStream), new(outStream) + head.next = tail + tail.prev = head + return &outStreamList{ + head: head, + tail: tail, + } +} + +func (l *outStreamList) enqueue(s *outStream) { + e := l.tail.prev + e.next = s + s.prev = e + s.next = l.tail + l.tail.prev = s +} + +// remove from the beginning of the list. +func (l *outStreamList) dequeue() *outStream { + b := l.head.next + if b == l.tail { + return nil + } + b.deleteSelf() + return b +} + +// controlBuffer is a way to pass information to loopy. +// Information is passed as specific struct types called control frames. +// A control frame not only represents data, messages or headers to be sent out +// but can also be used to instruct loopy to update its internal state. +// It shouldn't be confused with an HTTP2 frame, although some of the control frames +// like dataFrame and headerFrame do go out on wire as HTTP2 frames. +type controlBuffer struct { + ch chan struct{} + done <-chan struct{} + mu sync.Mutex + consumerWaiting bool + list *itemList + err error + + // transportResponseFrames counts the number of queued items that represent + // the response of an action initiated by the peer. trfChan is created + // when transportResponseFrames >= maxQueuedTransportResponseFrames and is + // closed and nilled when transportResponseFrames drops below the + // threshold. Both fields are protected by mu. + transportResponseFrames int + trfChan atomic.Value // *chan struct{} +} + +func newControlBuffer(done <-chan struct{}) *controlBuffer { + return &controlBuffer{ + ch: make(chan struct{}, 1), + list: &itemList{}, + done: done, + } +} + +// throttle blocks if there are too many incomingSettings/cleanupStreams in the +// controlbuf. +func (c *controlBuffer) throttle() { + ch, _ := c.trfChan.Load().(*chan struct{}) + if ch != nil { + select { + case <-*ch: + case <-c.done: + } + } +} + +func (c *controlBuffer) put(it cbItem) error { + _, err := c.executeAndPut(nil, it) + return err +} + +func (c *controlBuffer) executeAndPut(f func(it interface{}) bool, it cbItem) (bool, error) { + var wakeUp bool + c.mu.Lock() + if c.err != nil { + c.mu.Unlock() + return false, c.err + } + if f != nil { + if !f(it) { // f wasn't successful + c.mu.Unlock() + return false, nil + } + } + if c.consumerWaiting { + wakeUp = true + c.consumerWaiting = false + } + c.list.enqueue(it) + if it.isTransportResponseFrame() { + c.transportResponseFrames++ + if c.transportResponseFrames == maxQueuedTransportResponseFrames { + // We are adding the frame that puts us over the threshold; create + // a throttling channel. + ch := make(chan struct{}) + c.trfChan.Store(&ch) + } + } + c.mu.Unlock() + if wakeUp { + select { + case c.ch <- struct{}{}: + default: + } + } + return true, nil +} + +// Note argument f should never be nil. +func (c *controlBuffer) execute(f func(it interface{}) bool, it interface{}) (bool, error) { + c.mu.Lock() + if c.err != nil { + c.mu.Unlock() + return false, c.err + } + if !f(it) { // f wasn't successful + c.mu.Unlock() + return false, nil + } + c.mu.Unlock() + return true, nil +} + +func (c *controlBuffer) get(block bool) (interface{}, error) { + for { + c.mu.Lock() + if c.err != nil { + c.mu.Unlock() + return nil, c.err + } + if !c.list.isEmpty() { + h := c.list.dequeue().(cbItem) + if h.isTransportResponseFrame() { + if c.transportResponseFrames == maxQueuedTransportResponseFrames { + // We are removing the frame that put us over the + // threshold; close and clear the throttling channel. + ch := c.trfChan.Load().(*chan struct{}) + close(*ch) + c.trfChan.Store((*chan struct{})(nil)) + } + c.transportResponseFrames-- + } + c.mu.Unlock() + return h, nil + } + if !block { + c.mu.Unlock() + return nil, nil + } + c.consumerWaiting = true + c.mu.Unlock() + select { + case <-c.ch: + case <-c.done: + c.finish() + return nil, ErrConnClosing + } + } +} + +func (c *controlBuffer) finish() { + c.mu.Lock() + if c.err != nil { + c.mu.Unlock() + return + } + c.err = ErrConnClosing + // There may be headers for streams in the control buffer. + // These streams need to be cleaned out since the transport + // is still not aware of these yet. + for head := c.list.dequeueAll(); head != nil; head = head.next { + hdr, ok := head.it.(*headerFrame) + if !ok { + continue + } + if hdr.onOrphaned != nil { // It will be nil on the server-side. + hdr.onOrphaned(ErrConnClosing) + } + } + c.mu.Unlock() +} + +type side int + +const ( + clientSide side = iota + serverSide +) + +// Loopy receives frames from the control buffer. +// Each frame is handled individually; most of the work done by loopy goes +// into handling data frames. Loopy maintains a queue of active streams, and each +// stream maintains a queue of data frames; as loopy receives data frames +// it gets added to the queue of the relevant stream. +// Loopy goes over this list of active streams by processing one node every iteration, +// thereby closely resemebling to a round-robin scheduling over all streams. While +// processing a stream, loopy writes out data bytes from this stream capped by the min +// of http2MaxFrameLen, connection-level flow control and stream-level flow control. +type loopyWriter struct { + side side + cbuf *controlBuffer + sendQuota uint32 + oiws uint32 // outbound initial window size. + // estdStreams is map of all established streams that are not cleaned-up yet. + // On client-side, this is all streams whose headers were sent out. + // On server-side, this is all streams whose headers were received. + estdStreams map[uint32]*outStream // Established streams. + // activeStreams is a linked-list of all streams that have data to send and some + // stream-level flow control quota. + // Each of these streams internally have a list of data items(and perhaps trailers + // on the server-side) to be sent out. + activeStreams *outStreamList + framer *framer + hBuf *bytes.Buffer // The buffer for HPACK encoding. + hEnc *hpack.Encoder // HPACK encoder. + bdpEst *bdpEstimator + draining bool + + // Side-specific handlers + ssGoAwayHandler func(*goAway) (bool, error) +} + +func newLoopyWriter(s side, fr *framer, cbuf *controlBuffer, bdpEst *bdpEstimator) *loopyWriter { + var buf bytes.Buffer + l := &loopyWriter{ + side: s, + cbuf: cbuf, + sendQuota: defaultWindowSize, + oiws: defaultWindowSize, + estdStreams: make(map[uint32]*outStream), + activeStreams: newOutStreamList(), + framer: fr, + hBuf: &buf, + hEnc: hpack.NewEncoder(&buf), + bdpEst: bdpEst, + } + return l +} + +const minBatchSize = 1000 + +// run should be run in a separate goroutine. +// It reads control frames from controlBuf and processes them by: +// 1. Updating loopy's internal state, or/and +// 2. Writing out HTTP2 frames on the wire. +// +// Loopy keeps all active streams with data to send in a linked-list. +// All streams in the activeStreams linked-list must have both: +// 1. Data to send, and +// 2. Stream level flow control quota available. +// +// In each iteration of run loop, other than processing the incoming control +// frame, loopy calls processData, which processes one node from the activeStreams linked-list. +// This results in writing of HTTP2 frames into an underlying write buffer. +// When there's no more control frames to read from controlBuf, loopy flushes the write buffer. +// As an optimization, to increase the batch size for each flush, loopy yields the processor, once +// if the batch size is too low to give stream goroutines a chance to fill it up. +func (l *loopyWriter) run() (err error) { + defer func() { + if err == ErrConnClosing { + // Don't log ErrConnClosing as error since it happens + // 1. When the connection is closed by some other known issue. + // 2. User closed the connection. + // 3. A graceful close of connection. + if logger.V(logLevel) { + logger.Infof("transport: loopyWriter.run returning. %v", err) + } + err = nil + } + }() + for { + it, err := l.cbuf.get(true) + if err != nil { + return err + } + if err = l.handle(it); err != nil { + return err + } + if _, err = l.processData(); err != nil { + return err + } + gosched := true + hasdata: + for { + it, err := l.cbuf.get(false) + if err != nil { + return err + } + if it != nil { + if err = l.handle(it); err != nil { + return err + } + if _, err = l.processData(); err != nil { + return err + } + continue hasdata + } + isEmpty, err := l.processData() + if err != nil { + return err + } + if !isEmpty { + continue hasdata + } + if gosched { + gosched = false + if l.framer.writer.offset < minBatchSize { + runtime.Gosched() + continue hasdata + } + } + l.framer.writer.Flush() + break hasdata + + } + } +} + +func (l *loopyWriter) outgoingWindowUpdateHandler(w *outgoingWindowUpdate) error { + return l.framer.fr.WriteWindowUpdate(w.streamID, w.increment) +} + +func (l *loopyWriter) incomingWindowUpdateHandler(w *incomingWindowUpdate) error { + // Otherwise update the quota. + if w.streamID == 0 { + l.sendQuota += w.increment + return nil + } + // Find the stream and update it. + if str, ok := l.estdStreams[w.streamID]; ok { + str.bytesOutStanding -= int(w.increment) + if strQuota := int(l.oiws) - str.bytesOutStanding; strQuota > 0 && str.state == waitingOnStreamQuota { + str.state = active + l.activeStreams.enqueue(str) + return nil + } + } + return nil +} + +func (l *loopyWriter) outgoingSettingsHandler(s *outgoingSettings) error { + return l.framer.fr.WriteSettings(s.ss...) +} + +func (l *loopyWriter) incomingSettingsHandler(s *incomingSettings) error { + if err := l.applySettings(s.ss); err != nil { + return err + } + return l.framer.fr.WriteSettingsAck() +} + +func (l *loopyWriter) registerStreamHandler(h *registerStream) error { + str := &outStream{ + id: h.streamID, + state: empty, + itl: &itemList{}, + wq: h.wq, + } + l.estdStreams[h.streamID] = str + return nil +} + +func (l *loopyWriter) headerHandler(h *headerFrame) error { + if l.side == serverSide { + str, ok := l.estdStreams[h.streamID] + if !ok { + if logger.V(logLevel) { + logger.Warningf("transport: loopy doesn't recognize the stream: %d", h.streamID) + } + return nil + } + // Case 1.A: Server is responding back with headers. + if !h.endStream { + return l.writeHeader(h.streamID, h.endStream, h.hf, h.onWrite) + } + // else: Case 1.B: Server wants to close stream. + + if str.state != empty { // either active or waiting on stream quota. + // add it str's list of items. + str.itl.enqueue(h) + return nil + } + if err := l.writeHeader(h.streamID, h.endStream, h.hf, h.onWrite); err != nil { + return err + } + return l.cleanupStreamHandler(h.cleanup) + } + // Case 2: Client wants to originate stream. + str := &outStream{ + id: h.streamID, + state: empty, + itl: &itemList{}, + wq: h.wq, + } + str.itl.enqueue(h) + return l.originateStream(str) +} + +func (l *loopyWriter) originateStream(str *outStream) error { + hdr := str.itl.dequeue().(*headerFrame) + if err := hdr.initStream(str.id); err != nil { + if err == ErrConnClosing { + return err + } + // Other errors(errStreamDrain) need not close transport. + return nil + } + if err := l.writeHeader(str.id, hdr.endStream, hdr.hf, hdr.onWrite); err != nil { + return err + } + l.estdStreams[str.id] = str + return nil +} + +func (l *loopyWriter) writeHeader(streamID uint32, endStream bool, hf []hpack.HeaderField, onWrite func()) error { + if onWrite != nil { + onWrite() + } + l.hBuf.Reset() + for _, f := range hf { + if err := l.hEnc.WriteField(f); err != nil { + if logger.V(logLevel) { + logger.Warningf("transport: loopyWriter.writeHeader encountered error while encoding headers: %v", err) + } + } + } + var ( + err error + endHeaders, first bool + ) + first = true + for !endHeaders { + size := l.hBuf.Len() + if size > http2MaxFrameLen { + size = http2MaxFrameLen + } else { + endHeaders = true + } + if first { + first = false + err = l.framer.fr.WriteHeaders(http2.HeadersFrameParam{ + StreamID: streamID, + BlockFragment: l.hBuf.Next(size), + EndStream: endStream, + EndHeaders: endHeaders, + }) + } else { + err = l.framer.fr.WriteContinuation( + streamID, + endHeaders, + l.hBuf.Next(size), + ) + } + if err != nil { + return err + } + } + return nil +} + +func (l *loopyWriter) preprocessData(df *dataFrame) error { + str, ok := l.estdStreams[df.streamID] + if !ok { + return nil + } + // If we got data for a stream it means that + // stream was originated and the headers were sent out. + str.itl.enqueue(df) + if str.state == empty { + str.state = active + l.activeStreams.enqueue(str) + } + return nil +} + +func (l *loopyWriter) pingHandler(p *ping) error { + if !p.ack { + l.bdpEst.timesnap(p.data) + } + return l.framer.fr.WritePing(p.ack, p.data) + +} + +func (l *loopyWriter) outFlowControlSizeRequestHandler(o *outFlowControlSizeRequest) error { + o.resp <- l.sendQuota + return nil +} + +func (l *loopyWriter) cleanupStreamHandler(c *cleanupStream) error { + c.onWrite() + if str, ok := l.estdStreams[c.streamID]; ok { + // On the server side it could be a trailers-only response or + // a RST_STREAM before stream initialization thus the stream might + // not be established yet. + delete(l.estdStreams, c.streamID) + str.deleteSelf() + } + if c.rst { // If RST_STREAM needs to be sent. + if err := l.framer.fr.WriteRSTStream(c.streamID, c.rstCode); err != nil { + return err + } + } + if l.side == clientSide && l.draining && len(l.estdStreams) == 0 { + return ErrConnClosing + } + return nil +} + +func (l *loopyWriter) incomingGoAwayHandler(*incomingGoAway) error { + if l.side == clientSide { + l.draining = true + if len(l.estdStreams) == 0 { + return ErrConnClosing + } + } + return nil +} + +func (l *loopyWriter) goAwayHandler(g *goAway) error { + // Handling of outgoing GoAway is very specific to side. + if l.ssGoAwayHandler != nil { + draining, err := l.ssGoAwayHandler(g) + if err != nil { + return err + } + l.draining = draining + } + return nil +} + +func (l *loopyWriter) handle(i interface{}) error { + switch i := i.(type) { + case *incomingWindowUpdate: + return l.incomingWindowUpdateHandler(i) + case *outgoingWindowUpdate: + return l.outgoingWindowUpdateHandler(i) + case *incomingSettings: + return l.incomingSettingsHandler(i) + case *outgoingSettings: + return l.outgoingSettingsHandler(i) + case *headerFrame: + return l.headerHandler(i) + case *registerStream: + return l.registerStreamHandler(i) + case *cleanupStream: + return l.cleanupStreamHandler(i) + case *incomingGoAway: + return l.incomingGoAwayHandler(i) + case *dataFrame: + return l.preprocessData(i) + case *ping: + return l.pingHandler(i) + case *goAway: + return l.goAwayHandler(i) + case *outFlowControlSizeRequest: + return l.outFlowControlSizeRequestHandler(i) + default: + return fmt.Errorf("transport: unknown control message type %T", i) + } +} + +func (l *loopyWriter) applySettings(ss []http2.Setting) error { + for _, s := range ss { + switch s.ID { + case http2.SettingInitialWindowSize: + o := l.oiws + l.oiws = s.Val + if o < l.oiws { + // If the new limit is greater make all depleted streams active. + for _, stream := range l.estdStreams { + if stream.state == waitingOnStreamQuota { + stream.state = active + l.activeStreams.enqueue(stream) + } + } + } + case http2.SettingHeaderTableSize: + updateHeaderTblSize(l.hEnc, s.Val) + } + } + return nil +} + +// processData removes the first stream from active streams, writes out at most 16KB +// of its data and then puts it at the end of activeStreams if there's still more data +// to be sent and stream has some stream-level flow control. +func (l *loopyWriter) processData() (bool, error) { + if l.sendQuota == 0 { + return true, nil + } + str := l.activeStreams.dequeue() // Remove the first stream. + if str == nil { + return true, nil + } + dataItem := str.itl.peek().(*dataFrame) // Peek at the first data item this stream. + // A data item is represented by a dataFrame, since it later translates into + // multiple HTTP2 data frames. + // Every dataFrame has two buffers; h that keeps grpc-message header and d that is acutal data. + // As an optimization to keep wire traffic low, data from d is copied to h to make as big as the + // maximum possilbe HTTP2 frame size. + + if len(dataItem.h) == 0 && len(dataItem.d) == 0 { // Empty data frame + // Client sends out empty data frame with endStream = true + if err := l.framer.fr.WriteData(dataItem.streamID, dataItem.endStream, nil); err != nil { + return false, err + } + str.itl.dequeue() // remove the empty data item from stream + if str.itl.isEmpty() { + str.state = empty + } else if trailer, ok := str.itl.peek().(*headerFrame); ok { // the next item is trailers. + if err := l.writeHeader(trailer.streamID, trailer.endStream, trailer.hf, trailer.onWrite); err != nil { + return false, err + } + if err := l.cleanupStreamHandler(trailer.cleanup); err != nil { + return false, nil + } + } else { + l.activeStreams.enqueue(str) + } + return false, nil + } + var ( + buf []byte + ) + // Figure out the maximum size we can send + maxSize := http2MaxFrameLen + if strQuota := int(l.oiws) - str.bytesOutStanding; strQuota <= 0 { // stream-level flow control. + str.state = waitingOnStreamQuota + return false, nil + } else if maxSize > strQuota { + maxSize = strQuota + } + if maxSize > int(l.sendQuota) { // connection-level flow control. + maxSize = int(l.sendQuota) + } + // Compute how much of the header and data we can send within quota and max frame length + hSize := min(maxSize, len(dataItem.h)) + dSize := min(maxSize-hSize, len(dataItem.d)) + if hSize != 0 { + if dSize == 0 { + buf = dataItem.h + } else { + // We can add some data to grpc message header to distribute bytes more equally across frames. + // Copy on the stack to avoid generating garbage + var localBuf [http2MaxFrameLen]byte + copy(localBuf[:hSize], dataItem.h) + copy(localBuf[hSize:], dataItem.d[:dSize]) + buf = localBuf[:hSize+dSize] + } + } else { + buf = dataItem.d + } + + size := hSize + dSize + + // Now that outgoing flow controls are checked we can replenish str's write quota + str.wq.replenish(size) + var endStream bool + // If this is the last data message on this stream and all of it can be written in this iteration. + if dataItem.endStream && len(dataItem.h)+len(dataItem.d) <= size { + endStream = true + } + if dataItem.onEachWrite != nil { + dataItem.onEachWrite() + } + if err := l.framer.fr.WriteData(dataItem.streamID, endStream, buf[:size]); err != nil { + return false, err + } + str.bytesOutStanding += size + l.sendQuota -= uint32(size) + dataItem.h = dataItem.h[hSize:] + dataItem.d = dataItem.d[dSize:] + + if len(dataItem.h) == 0 && len(dataItem.d) == 0 { // All the data from that message was written out. + str.itl.dequeue() + } + if str.itl.isEmpty() { + str.state = empty + } else if trailer, ok := str.itl.peek().(*headerFrame); ok { // The next item is trailers. + if err := l.writeHeader(trailer.streamID, trailer.endStream, trailer.hf, trailer.onWrite); err != nil { + return false, err + } + if err := l.cleanupStreamHandler(trailer.cleanup); err != nil { + return false, err + } + } else if int(l.oiws)-str.bytesOutStanding <= 0 { // Ran out of stream quota. + str.state = waitingOnStreamQuota + } else { // Otherwise add it back to the list of active streams. + l.activeStreams.enqueue(str) + } + return false, nil +} + +func min(a, b int) int { + if a < b { + return a + } + return b +} diff --git a/vendor/google.golang.org/grpc/internal/transport/defaults.go b/vendor/google.golang.org/grpc/internal/transport/defaults.go new file mode 100644 index 000000000..9fa306b2e --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/defaults.go @@ -0,0 +1,49 @@ +/* + * + * Copyright 2018 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "math" + "time" +) + +const ( + // The default value of flow control window size in HTTP2 spec. + defaultWindowSize = 65535 + // The initial window size for flow control. + initialWindowSize = defaultWindowSize // for an RPC + infinity = time.Duration(math.MaxInt64) + defaultClientKeepaliveTime = infinity + defaultClientKeepaliveTimeout = 20 * time.Second + defaultMaxStreamsClient = 100 + defaultMaxConnectionIdle = infinity + defaultMaxConnectionAge = infinity + defaultMaxConnectionAgeGrace = infinity + defaultServerKeepaliveTime = 2 * time.Hour + defaultServerKeepaliveTimeout = 20 * time.Second + defaultKeepalivePolicyMinTime = 5 * time.Minute + // max window limit set by HTTP2 Specs. + maxWindowSize = math.MaxInt32 + // defaultWriteQuota is the default value for number of data + // bytes that each stream can schedule before some of it being + // flushed out. + defaultWriteQuota = 64 * 1024 + defaultClientMaxHeaderListSize = uint32(16 << 20) + defaultServerMaxHeaderListSize = uint32(16 << 20) +) diff --git a/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go new file mode 100644 index 000000000..f262edd8e --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/flowcontrol.go @@ -0,0 +1,217 @@ +/* + * + * Copyright 2014 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "fmt" + "math" + "sync" + "sync/atomic" +) + +// writeQuota is a soft limit on the amount of data a stream can +// schedule before some of it is written out. +type writeQuota struct { + quota int32 + // get waits on read from when quota goes less than or equal to zero. + // replenish writes on it when quota goes positive again. + ch chan struct{} + // done is triggered in error case. + done <-chan struct{} + // replenish is called by loopyWriter to give quota back to. + // It is implemented as a field so that it can be updated + // by tests. + replenish func(n int) +} + +func newWriteQuota(sz int32, done <-chan struct{}) *writeQuota { + w := &writeQuota{ + quota: sz, + ch: make(chan struct{}, 1), + done: done, + } + w.replenish = w.realReplenish + return w +} + +func (w *writeQuota) get(sz int32) error { + for { + if atomic.LoadInt32(&w.quota) > 0 { + atomic.AddInt32(&w.quota, -sz) + return nil + } + select { + case <-w.ch: + continue + case <-w.done: + return errStreamDone + } + } +} + +func (w *writeQuota) realReplenish(n int) { + sz := int32(n) + a := atomic.AddInt32(&w.quota, sz) + b := a - sz + if b <= 0 && a > 0 { + select { + case w.ch <- struct{}{}: + default: + } + } +} + +type trInFlow struct { + limit uint32 + unacked uint32 + effectiveWindowSize uint32 +} + +func (f *trInFlow) newLimit(n uint32) uint32 { + d := n - f.limit + f.limit = n + f.updateEffectiveWindowSize() + return d +} + +func (f *trInFlow) onData(n uint32) uint32 { + f.unacked += n + if f.unacked >= f.limit/4 { + w := f.unacked + f.unacked = 0 + f.updateEffectiveWindowSize() + return w + } + f.updateEffectiveWindowSize() + return 0 +} + +func (f *trInFlow) reset() uint32 { + w := f.unacked + f.unacked = 0 + f.updateEffectiveWindowSize() + return w +} + +func (f *trInFlow) updateEffectiveWindowSize() { + atomic.StoreUint32(&f.effectiveWindowSize, f.limit-f.unacked) +} + +func (f *trInFlow) getSize() uint32 { + return atomic.LoadUint32(&f.effectiveWindowSize) +} + +// TODO(mmukhi): Simplify this code. +// inFlow deals with inbound flow control +type inFlow struct { + mu sync.Mutex + // The inbound flow control limit for pending data. + limit uint32 + // pendingData is the overall data which have been received but not been + // consumed by applications. + pendingData uint32 + // The amount of data the application has consumed but grpc has not sent + // window update for them. Used to reduce window update frequency. + pendingUpdate uint32 + // delta is the extra window update given by receiver when an application + // is reading data bigger in size than the inFlow limit. + delta uint32 +} + +// newLimit updates the inflow window to a new value n. +// It assumes that n is always greater than the old limit. +func (f *inFlow) newLimit(n uint32) uint32 { + f.mu.Lock() + d := n - f.limit + f.limit = n + f.mu.Unlock() + return d +} + +func (f *inFlow) maybeAdjust(n uint32) uint32 { + if n > uint32(math.MaxInt32) { + n = uint32(math.MaxInt32) + } + f.mu.Lock() + defer f.mu.Unlock() + // estSenderQuota is the receiver's view of the maximum number of bytes the sender + // can send without a window update. + estSenderQuota := int32(f.limit - (f.pendingData + f.pendingUpdate)) + // estUntransmittedData is the maximum number of bytes the sends might not have put + // on the wire yet. A value of 0 or less means that we have already received all or + // more bytes than the application is requesting to read. + estUntransmittedData := int32(n - f.pendingData) // Casting into int32 since it could be negative. + // This implies that unless we send a window update, the sender won't be able to send all the bytes + // for this message. Therefore we must send an update over the limit since there's an active read + // request from the application. + if estUntransmittedData > estSenderQuota { + // Sender's window shouldn't go more than 2^31 - 1 as specified in the HTTP spec. + if f.limit+n > maxWindowSize { + f.delta = maxWindowSize - f.limit + } else { + // Send a window update for the whole message and not just the difference between + // estUntransmittedData and estSenderQuota. This will be helpful in case the message + // is padded; We will fallback on the current available window(at least a 1/4th of the limit). + f.delta = n + } + return f.delta + } + return 0 +} + +// onData is invoked when some data frame is received. It updates pendingData. +func (f *inFlow) onData(n uint32) error { + f.mu.Lock() + f.pendingData += n + if f.pendingData+f.pendingUpdate > f.limit+f.delta { + limit := f.limit + rcvd := f.pendingData + f.pendingUpdate + f.mu.Unlock() + return fmt.Errorf("received %d-bytes data exceeding the limit %d bytes", rcvd, limit) + } + f.mu.Unlock() + return nil +} + +// onRead is invoked when the application reads the data. It returns the window size +// to be sent to the peer. +func (f *inFlow) onRead(n uint32) uint32 { + f.mu.Lock() + if f.pendingData == 0 { + f.mu.Unlock() + return 0 + } + f.pendingData -= n + if n > f.delta { + n -= f.delta + f.delta = 0 + } else { + f.delta -= n + n = 0 + } + f.pendingUpdate += n + if f.pendingUpdate >= f.limit/4 { + wu := f.pendingUpdate + f.pendingUpdate = 0 + f.mu.Unlock() + return wu + } + f.mu.Unlock() + return 0 +} diff --git a/vendor/google.golang.org/grpc/internal/transport/handler_server.go b/vendor/google.golang.org/grpc/internal/transport/handler_server.go new file mode 100644 index 000000000..05d3871e6 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/handler_server.go @@ -0,0 +1,463 @@ +/* + * + * Copyright 2016 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// This file is the implementation of a gRPC server using HTTP/2 which +// uses the standard Go http2 Server implementation (via the +// http.Handler interface), rather than speaking low-level HTTP/2 +// frames itself. It is the implementation of *grpc.Server.ServeHTTP. + +package transport + +import ( + "bytes" + "context" + "errors" + "fmt" + "io" + "net" + "net/http" + "strings" + "sync" + "time" + + "github.com/golang/protobuf/proto" + "golang.org/x/net/http2" + "google.golang.org/grpc/codes" + "google.golang.org/grpc/credentials" + "google.golang.org/grpc/internal/grpcutil" + "google.golang.org/grpc/metadata" + "google.golang.org/grpc/peer" + "google.golang.org/grpc/stats" + "google.golang.org/grpc/status" +) + +// NewServerHandlerTransport returns a ServerTransport handling gRPC +// from inside an http.Handler. It requires that the http Server +// supports HTTP/2. +func NewServerHandlerTransport(w http.ResponseWriter, r *http.Request, stats stats.Handler) (ServerTransport, error) { + if r.ProtoMajor != 2 { + return nil, errors.New("gRPC requires HTTP/2") + } + if r.Method != "POST" { + return nil, errors.New("invalid gRPC request method") + } + contentType := r.Header.Get("Content-Type") + // TODO: do we assume contentType is lowercase? we did before + contentSubtype, validContentType := grpcutil.ContentSubtype(contentType) + if !validContentType { + return nil, errors.New("invalid gRPC request content-type") + } + if _, ok := w.(http.Flusher); !ok { + return nil, errors.New("gRPC requires a ResponseWriter supporting http.Flusher") + } + + st := &serverHandlerTransport{ + rw: w, + req: r, + closedCh: make(chan struct{}), + writes: make(chan func()), + contentType: contentType, + contentSubtype: contentSubtype, + stats: stats, + } + + if v := r.Header.Get("grpc-timeout"); v != "" { + to, err := decodeTimeout(v) + if err != nil { + return nil, status.Errorf(codes.Internal, "malformed time-out: %v", err) + } + st.timeoutSet = true + st.timeout = to + } + + metakv := []string{"content-type", contentType} + if r.Host != "" { + metakv = append(metakv, ":authority", r.Host) + } + for k, vv := range r.Header { + k = strings.ToLower(k) + if isReservedHeader(k) && !isWhitelistedHeader(k) { + continue + } + for _, v := range vv { + v, err := decodeMetadataHeader(k, v) + if err != nil { + return nil, status.Errorf(codes.Internal, "malformed binary metadata: %v", err) + } + metakv = append(metakv, k, v) + } + } + st.headerMD = metadata.Pairs(metakv...) + + return st, nil +} + +// serverHandlerTransport is an implementation of ServerTransport +// which replies to exactly one gRPC request (exactly one HTTP request), +// using the net/http.Handler interface. This http.Handler is guaranteed +// at this point to be speaking over HTTP/2, so it's able to speak valid +// gRPC. +type serverHandlerTransport struct { + rw http.ResponseWriter + req *http.Request + timeoutSet bool + timeout time.Duration + + headerMD metadata.MD + + closeOnce sync.Once + closedCh chan struct{} // closed on Close + + // writes is a channel of code to run serialized in the + // ServeHTTP (HandleStreams) goroutine. The channel is closed + // when WriteStatus is called. + writes chan func() + + // block concurrent WriteStatus calls + // e.g. grpc/(*serverStream).SendMsg/RecvMsg + writeStatusMu sync.Mutex + + // we just mirror the request content-type + contentType string + // we store both contentType and contentSubtype so we don't keep recreating them + // TODO make sure this is consistent across handler_server and http2_server + contentSubtype string + + stats stats.Handler +} + +func (ht *serverHandlerTransport) Close() error { + ht.closeOnce.Do(ht.closeCloseChanOnce) + return nil +} + +func (ht *serverHandlerTransport) closeCloseChanOnce() { close(ht.closedCh) } + +func (ht *serverHandlerTransport) RemoteAddr() net.Addr { return strAddr(ht.req.RemoteAddr) } + +// strAddr is a net.Addr backed by either a TCP "ip:port" string, or +// the empty string if unknown. +type strAddr string + +func (a strAddr) Network() string { + if a != "" { + // Per the documentation on net/http.Request.RemoteAddr, if this is + // set, it's set to the IP:port of the peer (hence, TCP): + // https://golang.org/pkg/net/http/#Request + // + // If we want to support Unix sockets later, we can + // add our own grpc-specific convention within the + // grpc codebase to set RemoteAddr to a different + // format, or probably better: we can attach it to the + // context and use that from serverHandlerTransport.RemoteAddr. + return "tcp" + } + return "" +} + +func (a strAddr) String() string { return string(a) } + +// do runs fn in the ServeHTTP goroutine. +func (ht *serverHandlerTransport) do(fn func()) error { + select { + case <-ht.closedCh: + return ErrConnClosing + case ht.writes <- fn: + return nil + } +} + +func (ht *serverHandlerTransport) WriteStatus(s *Stream, st *status.Status) error { + ht.writeStatusMu.Lock() + defer ht.writeStatusMu.Unlock() + + headersWritten := s.updateHeaderSent() + err := ht.do(func() { + if !headersWritten { + ht.writePendingHeaders(s) + } + + // And flush, in case no header or body has been sent yet. + // This forces a separation of headers and trailers if this is the + // first call (for example, in end2end tests's TestNoService). + ht.rw.(http.Flusher).Flush() + + h := ht.rw.Header() + h.Set("Grpc-Status", fmt.Sprintf("%d", st.Code())) + if m := st.Message(); m != "" { + h.Set("Grpc-Message", encodeGrpcMessage(m)) + } + + if p := st.Proto(); p != nil && len(p.Details) > 0 { + stBytes, err := proto.Marshal(p) + if err != nil { + // TODO: return error instead, when callers are able to handle it. + panic(err) + } + + h.Set("Grpc-Status-Details-Bin", encodeBinHeader(stBytes)) + } + + if md := s.Trailer(); len(md) > 0 { + for k, vv := range md { + // Clients don't tolerate reading restricted headers after some non restricted ones were sent. + if isReservedHeader(k) { + continue + } + for _, v := range vv { + // http2 ResponseWriter mechanism to send undeclared Trailers after + // the headers have possibly been written. + h.Add(http2.TrailerPrefix+k, encodeMetadataHeader(k, v)) + } + } + } + }) + + if err == nil { // transport has not been closed + if ht.stats != nil { + // Note: The trailer fields are compressed with hpack after this call returns. + // No WireLength field is set here. + ht.stats.HandleRPC(s.Context(), &stats.OutTrailer{ + Trailer: s.trailer.Copy(), + }) + } + } + ht.Close() + return err +} + +// writePendingHeaders sets common and custom headers on the first +// write call (Write, WriteHeader, or WriteStatus) +func (ht *serverHandlerTransport) writePendingHeaders(s *Stream) { + ht.writeCommonHeaders(s) + ht.writeCustomHeaders(s) +} + +// writeCommonHeaders sets common headers on the first write +// call (Write, WriteHeader, or WriteStatus). +func (ht *serverHandlerTransport) writeCommonHeaders(s *Stream) { + h := ht.rw.Header() + h["Date"] = nil // suppress Date to make tests happy; TODO: restore + h.Set("Content-Type", ht.contentType) + + // Predeclare trailers we'll set later in WriteStatus (after the body). + // This is a SHOULD in the HTTP RFC, and the way you add (known) + // Trailers per the net/http.ResponseWriter contract. + // See https://golang.org/pkg/net/http/#ResponseWriter + // and https://golang.org/pkg/net/http/#example_ResponseWriter_trailers + h.Add("Trailer", "Grpc-Status") + h.Add("Trailer", "Grpc-Message") + h.Add("Trailer", "Grpc-Status-Details-Bin") + + if s.sendCompress != "" { + h.Set("Grpc-Encoding", s.sendCompress) + } +} + +// writeCustomHeaders sets custom headers set on the stream via SetHeader +// on the first write call (Write, WriteHeader, or WriteStatus). +func (ht *serverHandlerTransport) writeCustomHeaders(s *Stream) { + h := ht.rw.Header() + + s.hdrMu.Lock() + for k, vv := range s.header { + if isReservedHeader(k) { + continue + } + for _, v := range vv { + h.Add(k, encodeMetadataHeader(k, v)) + } + } + + s.hdrMu.Unlock() +} + +func (ht *serverHandlerTransport) Write(s *Stream, hdr []byte, data []byte, opts *Options) error { + headersWritten := s.updateHeaderSent() + return ht.do(func() { + if !headersWritten { + ht.writePendingHeaders(s) + } + ht.rw.Write(hdr) + ht.rw.Write(data) + ht.rw.(http.Flusher).Flush() + }) +} + +func (ht *serverHandlerTransport) WriteHeader(s *Stream, md metadata.MD) error { + if err := s.SetHeader(md); err != nil { + return err + } + + headersWritten := s.updateHeaderSent() + err := ht.do(func() { + if !headersWritten { + ht.writePendingHeaders(s) + } + + ht.rw.WriteHeader(200) + ht.rw.(http.Flusher).Flush() + }) + + if err == nil { + if ht.stats != nil { + // Note: The header fields are compressed with hpack after this call returns. + // No WireLength field is set here. + ht.stats.HandleRPC(s.Context(), &stats.OutHeader{ + Header: md.Copy(), + Compression: s.sendCompress, + }) + } + } + return err +} + +func (ht *serverHandlerTransport) HandleStreams(startStream func(*Stream), traceCtx func(context.Context, string) context.Context) { + // With this transport type there will be exactly 1 stream: this HTTP request. + + ctx := ht.req.Context() + var cancel context.CancelFunc + if ht.timeoutSet { + ctx, cancel = context.WithTimeout(ctx, ht.timeout) + } else { + ctx, cancel = context.WithCancel(ctx) + } + + // requestOver is closed when the status has been written via WriteStatus. + requestOver := make(chan struct{}) + go func() { + select { + case <-requestOver: + case <-ht.closedCh: + case <-ht.req.Context().Done(): + } + cancel() + ht.Close() + }() + + req := ht.req + + s := &Stream{ + id: 0, // irrelevant + requestRead: func(int) {}, + cancel: cancel, + buf: newRecvBuffer(), + st: ht, + method: req.URL.Path, + recvCompress: req.Header.Get("grpc-encoding"), + contentSubtype: ht.contentSubtype, + } + pr := &peer.Peer{ + Addr: ht.RemoteAddr(), + } + if req.TLS != nil { + pr.AuthInfo = credentials.TLSInfo{State: *req.TLS, CommonAuthInfo: credentials.CommonAuthInfo{SecurityLevel: credentials.PrivacyAndIntegrity}} + } + ctx = metadata.NewIncomingContext(ctx, ht.headerMD) + s.ctx = peer.NewContext(ctx, pr) + if ht.stats != nil { + s.ctx = ht.stats.TagRPC(s.ctx, &stats.RPCTagInfo{FullMethodName: s.method}) + inHeader := &stats.InHeader{ + FullMethod: s.method, + RemoteAddr: ht.RemoteAddr(), + Compression: s.recvCompress, + } + ht.stats.HandleRPC(s.ctx, inHeader) + } + s.trReader = &transportReader{ + reader: &recvBufferReader{ctx: s.ctx, ctxDone: s.ctx.Done(), recv: s.buf, freeBuffer: func(*bytes.Buffer) {}}, + windowHandler: func(int) {}, + } + + // readerDone is closed when the Body.Read-ing goroutine exits. + readerDone := make(chan struct{}) + go func() { + defer close(readerDone) + + // TODO: minimize garbage, optimize recvBuffer code/ownership + const readSize = 8196 + for buf := make([]byte, readSize); ; { + n, err := req.Body.Read(buf) + if n > 0 { + s.buf.put(recvMsg{buffer: bytes.NewBuffer(buf[:n:n])}) + buf = buf[n:] + } + if err != nil { + s.buf.put(recvMsg{err: mapRecvMsgError(err)}) + return + } + if len(buf) == 0 { + buf = make([]byte, readSize) + } + } + }() + + // startStream is provided by the *grpc.Server's serveStreams. + // It starts a goroutine serving s and exits immediately. + // The goroutine that is started is the one that then calls + // into ht, calling WriteHeader, Write, WriteStatus, Close, etc. + startStream(s) + + ht.runStream() + close(requestOver) + + // Wait for reading goroutine to finish. + req.Body.Close() + <-readerDone +} + +func (ht *serverHandlerTransport) runStream() { + for { + select { + case fn := <-ht.writes: + fn() + case <-ht.closedCh: + return + } + } +} + +func (ht *serverHandlerTransport) IncrMsgSent() {} + +func (ht *serverHandlerTransport) IncrMsgRecv() {} + +func (ht *serverHandlerTransport) Drain() { + panic("Drain() is not implemented") +} + +// mapRecvMsgError returns the non-nil err into the appropriate +// error value as expected by callers of *grpc.parser.recvMsg. +// In particular, in can only be: +// * io.EOF +// * io.ErrUnexpectedEOF +// * of type transport.ConnectionError +// * an error from the status package +func mapRecvMsgError(err error) error { + if err == io.EOF || err == io.ErrUnexpectedEOF { + return err + } + if se, ok := err.(http2.StreamError); ok { + if code, ok := http2ErrConvTab[se.Code]; ok { + return status.Error(code, se.Error()) + } + } + if strings.Contains(err.Error(), "body closed by handler") { + return status.Error(codes.Canceled, err.Error()) + } + return connectionErrorf(true, err, err.Error()) +} diff --git a/vendor/google.golang.org/grpc/internal/transport/http2_client.go b/vendor/google.golang.org/grpc/internal/transport/http2_client.go new file mode 100644 index 000000000..e73b77a15 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/http2_client.go @@ -0,0 +1,1491 @@ +/* + * + * Copyright 2014 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "context" + "fmt" + "io" + "math" + "net" + "strconv" + "strings" + "sync" + "sync/atomic" + "time" + + "golang.org/x/net/http2" + "golang.org/x/net/http2/hpack" + "google.golang.org/grpc/internal/grpcutil" + + "google.golang.org/grpc/codes" + "google.golang.org/grpc/credentials" + "google.golang.org/grpc/internal" + "google.golang.org/grpc/internal/channelz" + "google.golang.org/grpc/internal/syscall" + "google.golang.org/grpc/keepalive" + "google.golang.org/grpc/metadata" + "google.golang.org/grpc/peer" + "google.golang.org/grpc/resolver" + "google.golang.org/grpc/stats" + "google.golang.org/grpc/status" +) + +// clientConnectionCounter counts the number of connections a client has +// initiated (equal to the number of http2Clients created). Must be accessed +// atomically. +var clientConnectionCounter uint64 + +// http2Client implements the ClientTransport interface with HTTP2. +type http2Client struct { + lastRead int64 // Keep this field 64-bit aligned. Accessed atomically. + ctx context.Context + cancel context.CancelFunc + ctxDone <-chan struct{} // Cache the ctx.Done() chan. + userAgent string + md interface{} + conn net.Conn // underlying communication channel + loopy *loopyWriter + remoteAddr net.Addr + localAddr net.Addr + authInfo credentials.AuthInfo // auth info about the connection + + readerDone chan struct{} // sync point to enable testing. + writerDone chan struct{} // sync point to enable testing. + // goAway is closed to notify the upper layer (i.e., addrConn.transportMonitor) + // that the server sent GoAway on this transport. + goAway chan struct{} + + framer *framer + // controlBuf delivers all the control related tasks (e.g., window + // updates, reset streams, and various settings) to the controller. + controlBuf *controlBuffer + fc *trInFlow + // The scheme used: https if TLS is on, http otherwise. + scheme string + + isSecure bool + + perRPCCreds []credentials.PerRPCCredentials + + kp keepalive.ClientParameters + keepaliveEnabled bool + + statsHandler stats.Handler + + initialWindowSize int32 + + // configured by peer through SETTINGS_MAX_HEADER_LIST_SIZE + maxSendHeaderListSize *uint32 + + bdpEst *bdpEstimator + // onPrefaceReceipt is a callback that client transport calls upon + // receiving server preface to signal that a succefull HTTP2 + // connection was established. + onPrefaceReceipt func() + + maxConcurrentStreams uint32 + streamQuota int64 + streamsQuotaAvailable chan struct{} + waitingStreams uint32 + nextID uint32 + + mu sync.Mutex // guard the following variables + state transportState + activeStreams map[uint32]*Stream + // prevGoAway ID records the Last-Stream-ID in the previous GOAway frame. + prevGoAwayID uint32 + // goAwayReason records the http2.ErrCode and debug data received with the + // GoAway frame. + goAwayReason GoAwayReason + // A condition variable used to signal when the keepalive goroutine should + // go dormant. The condition for dormancy is based on the number of active + // streams and the `PermitWithoutStream` keepalive client parameter. And + // since the number of active streams is guarded by the above mutex, we use + // the same for this condition variable as well. + kpDormancyCond *sync.Cond + // A boolean to track whether the keepalive goroutine is dormant or not. + // This is checked before attempting to signal the above condition + // variable. + kpDormant bool + + // Fields below are for channelz metric collection. + channelzID int64 // channelz unique identification number + czData *channelzData + + onGoAway func(GoAwayReason) + onClose func() + + bufferPool *bufferPool + + connectionID uint64 +} + +func dial(ctx context.Context, fn func(context.Context, string) (net.Conn, error), addr string) (net.Conn, error) { + if fn != nil { + return fn(ctx, addr) + } + return (&net.Dialer{}).DialContext(ctx, "tcp", addr) +} + +func isTemporary(err error) bool { + switch err := err.(type) { + case interface { + Temporary() bool + }: + return err.Temporary() + case interface { + Timeout() bool + }: + // Timeouts may be resolved upon retry, and are thus treated as + // temporary. + return err.Timeout() + } + return true +} + +// newHTTP2Client constructs a connected ClientTransport to addr based on HTTP2 +// and starts to receive messages on it. Non-nil error returns if construction +// fails. +func newHTTP2Client(connectCtx, ctx context.Context, addr resolver.Address, opts ConnectOptions, onPrefaceReceipt func(), onGoAway func(GoAwayReason), onClose func()) (_ *http2Client, err error) { + scheme := "http" + ctx, cancel := context.WithCancel(ctx) + defer func() { + if err != nil { + cancel() + } + }() + + conn, err := dial(connectCtx, opts.Dialer, addr.Addr) + if err != nil { + if opts.FailOnNonTempDialError { + return nil, connectionErrorf(isTemporary(err), err, "transport: error while dialing: %v", err) + } + return nil, connectionErrorf(true, err, "transport: Error while dialing %v", err) + } + // Any further errors will close the underlying connection + defer func(conn net.Conn) { + if err != nil { + conn.Close() + } + }(conn) + kp := opts.KeepaliveParams + // Validate keepalive parameters. + if kp.Time == 0 { + kp.Time = defaultClientKeepaliveTime + } + if kp.Timeout == 0 { + kp.Timeout = defaultClientKeepaliveTimeout + } + keepaliveEnabled := false + if kp.Time != infinity { + if err = syscall.SetTCPUserTimeout(conn, kp.Timeout); err != nil { + return nil, connectionErrorf(false, err, "transport: failed to set TCP_USER_TIMEOUT: %v", err) + } + keepaliveEnabled = true + } + var ( + isSecure bool + authInfo credentials.AuthInfo + ) + transportCreds := opts.TransportCredentials + perRPCCreds := opts.PerRPCCredentials + + if b := opts.CredsBundle; b != nil { + if t := b.TransportCredentials(); t != nil { + transportCreds = t + } + if t := b.PerRPCCredentials(); t != nil { + perRPCCreds = append(perRPCCreds, t) + } + } + if transportCreds != nil { + // gRPC, resolver, balancer etc. can specify arbitrary data in the + // Attributes field of resolver.Address, which is shoved into connectCtx + // and passed to the credential handshaker. This makes it possible for + // address specific arbitrary data to reach the credential handshaker. + contextWithHandshakeInfo := internal.NewClientHandshakeInfoContext.(func(context.Context, credentials.ClientHandshakeInfo) context.Context) + connectCtx = contextWithHandshakeInfo(connectCtx, credentials.ClientHandshakeInfo{Attributes: addr.Attributes}) + conn, authInfo, err = transportCreds.ClientHandshake(connectCtx, addr.ServerName, conn) + if err != nil { + return nil, connectionErrorf(isTemporary(err), err, "transport: authentication handshake failed: %v", err) + } + isSecure = true + if transportCreds.Info().SecurityProtocol == "tls" { + scheme = "https" + } + } + dynamicWindow := true + icwz := int32(initialWindowSize) + if opts.InitialConnWindowSize >= defaultWindowSize { + icwz = opts.InitialConnWindowSize + dynamicWindow = false + } + writeBufSize := opts.WriteBufferSize + readBufSize := opts.ReadBufferSize + maxHeaderListSize := defaultClientMaxHeaderListSize + if opts.MaxHeaderListSize != nil { + maxHeaderListSize = *opts.MaxHeaderListSize + } + t := &http2Client{ + ctx: ctx, + ctxDone: ctx.Done(), // Cache Done chan. + cancel: cancel, + userAgent: opts.UserAgent, + md: addr.Metadata, + conn: conn, + remoteAddr: conn.RemoteAddr(), + localAddr: conn.LocalAddr(), + authInfo: authInfo, + readerDone: make(chan struct{}), + writerDone: make(chan struct{}), + goAway: make(chan struct{}), + framer: newFramer(conn, writeBufSize, readBufSize, maxHeaderListSize), + fc: &trInFlow{limit: uint32(icwz)}, + scheme: scheme, + activeStreams: make(map[uint32]*Stream), + isSecure: isSecure, + perRPCCreds: perRPCCreds, + kp: kp, + statsHandler: opts.StatsHandler, + initialWindowSize: initialWindowSize, + onPrefaceReceipt: onPrefaceReceipt, + nextID: 1, + maxConcurrentStreams: defaultMaxStreamsClient, + streamQuota: defaultMaxStreamsClient, + streamsQuotaAvailable: make(chan struct{}, 1), + czData: new(channelzData), + onGoAway: onGoAway, + onClose: onClose, + keepaliveEnabled: keepaliveEnabled, + bufferPool: newBufferPool(), + } + t.controlBuf = newControlBuffer(t.ctxDone) + if opts.InitialWindowSize >= defaultWindowSize { + t.initialWindowSize = opts.InitialWindowSize + dynamicWindow = false + } + if dynamicWindow { + t.bdpEst = &bdpEstimator{ + bdp: initialWindowSize, + updateFlowControl: t.updateFlowControl, + } + } + if t.statsHandler != nil { + t.ctx = t.statsHandler.TagConn(t.ctx, &stats.ConnTagInfo{ + RemoteAddr: t.remoteAddr, + LocalAddr: t.localAddr, + }) + connBegin := &stats.ConnBegin{ + Client: true, + } + t.statsHandler.HandleConn(t.ctx, connBegin) + } + if channelz.IsOn() { + t.channelzID = channelz.RegisterNormalSocket(t, opts.ChannelzParentID, fmt.Sprintf("%s -> %s", t.localAddr, t.remoteAddr)) + } + if t.keepaliveEnabled { + t.kpDormancyCond = sync.NewCond(&t.mu) + go t.keepalive() + } + // Start the reader goroutine for incoming message. Each transport has + // a dedicated goroutine which reads HTTP2 frame from network. Then it + // dispatches the frame to the corresponding stream entity. + go t.reader() + + // Send connection preface to server. + n, err := t.conn.Write(clientPreface) + if err != nil { + t.Close() + return nil, connectionErrorf(true, err, "transport: failed to write client preface: %v", err) + } + if n != len(clientPreface) { + t.Close() + return nil, connectionErrorf(true, err, "transport: preface mismatch, wrote %d bytes; want %d", n, len(clientPreface)) + } + var ss []http2.Setting + + if t.initialWindowSize != defaultWindowSize { + ss = append(ss, http2.Setting{ + ID: http2.SettingInitialWindowSize, + Val: uint32(t.initialWindowSize), + }) + } + if opts.MaxHeaderListSize != nil { + ss = append(ss, http2.Setting{ + ID: http2.SettingMaxHeaderListSize, + Val: *opts.MaxHeaderListSize, + }) + } + err = t.framer.fr.WriteSettings(ss...) + if err != nil { + t.Close() + return nil, connectionErrorf(true, err, "transport: failed to write initial settings frame: %v", err) + } + // Adjust the connection flow control window if needed. + if delta := uint32(icwz - defaultWindowSize); delta > 0 { + if err := t.framer.fr.WriteWindowUpdate(0, delta); err != nil { + t.Close() + return nil, connectionErrorf(true, err, "transport: failed to write window update: %v", err) + } + } + + t.connectionID = atomic.AddUint64(&clientConnectionCounter, 1) + + if err := t.framer.writer.Flush(); err != nil { + return nil, err + } + go func() { + t.loopy = newLoopyWriter(clientSide, t.framer, t.controlBuf, t.bdpEst) + err := t.loopy.run() + if err != nil { + if logger.V(logLevel) { + logger.Errorf("transport: loopyWriter.run returning. Err: %v", err) + } + } + // If it's a connection error, let reader goroutine handle it + // since there might be data in the buffers. + if _, ok := err.(net.Error); !ok { + t.conn.Close() + } + close(t.writerDone) + }() + return t, nil +} + +func (t *http2Client) newStream(ctx context.Context, callHdr *CallHdr) *Stream { + // TODO(zhaoq): Handle uint32 overflow of Stream.id. + s := &Stream{ + ct: t, + done: make(chan struct{}), + method: callHdr.Method, + sendCompress: callHdr.SendCompress, + buf: newRecvBuffer(), + headerChan: make(chan struct{}), + contentSubtype: callHdr.ContentSubtype, + } + s.wq = newWriteQuota(defaultWriteQuota, s.done) + s.requestRead = func(n int) { + t.adjustWindow(s, uint32(n)) + } + // The client side stream context should have exactly the same life cycle with the user provided context. + // That means, s.ctx should be read-only. And s.ctx is done iff ctx is done. + // So we use the original context here instead of creating a copy. + s.ctx = ctx + s.trReader = &transportReader{ + reader: &recvBufferReader{ + ctx: s.ctx, + ctxDone: s.ctx.Done(), + recv: s.buf, + closeStream: func(err error) { + t.CloseStream(s, err) + }, + freeBuffer: t.bufferPool.put, + }, + windowHandler: func(n int) { + t.updateWindow(s, uint32(n)) + }, + } + return s +} + +func (t *http2Client) getPeer() *peer.Peer { + return &peer.Peer{ + Addr: t.remoteAddr, + AuthInfo: t.authInfo, + } +} + +func (t *http2Client) createHeaderFields(ctx context.Context, callHdr *CallHdr) ([]hpack.HeaderField, error) { + aud := t.createAudience(callHdr) + ri := credentials.RequestInfo{ + Method: callHdr.Method, + AuthInfo: t.authInfo, + } + ctxWithRequestInfo := internal.NewRequestInfoContext.(func(context.Context, credentials.RequestInfo) context.Context)(ctx, ri) + authData, err := t.getTrAuthData(ctxWithRequestInfo, aud) + if err != nil { + return nil, err + } + callAuthData, err := t.getCallAuthData(ctxWithRequestInfo, aud, callHdr) + if err != nil { + return nil, err + } + // TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields + // first and create a slice of that exact size. + // Make the slice of certain predictable size to reduce allocations made by append. + hfLen := 7 // :method, :scheme, :path, :authority, content-type, user-agent, te + hfLen += len(authData) + len(callAuthData) + headerFields := make([]hpack.HeaderField, 0, hfLen) + headerFields = append(headerFields, hpack.HeaderField{Name: ":method", Value: "POST"}) + headerFields = append(headerFields, hpack.HeaderField{Name: ":scheme", Value: t.scheme}) + headerFields = append(headerFields, hpack.HeaderField{Name: ":path", Value: callHdr.Method}) + headerFields = append(headerFields, hpack.HeaderField{Name: ":authority", Value: callHdr.Host}) + headerFields = append(headerFields, hpack.HeaderField{Name: "content-type", Value: grpcutil.ContentType(callHdr.ContentSubtype)}) + headerFields = append(headerFields, hpack.HeaderField{Name: "user-agent", Value: t.userAgent}) + headerFields = append(headerFields, hpack.HeaderField{Name: "te", Value: "trailers"}) + if callHdr.PreviousAttempts > 0 { + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-previous-rpc-attempts", Value: strconv.Itoa(callHdr.PreviousAttempts)}) + } + + if callHdr.SendCompress != "" { + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-encoding", Value: callHdr.SendCompress}) + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-accept-encoding", Value: callHdr.SendCompress}) + } + if dl, ok := ctx.Deadline(); ok { + // Send out timeout regardless its value. The server can detect timeout context by itself. + // TODO(mmukhi): Perhaps this field should be updated when actually writing out to the wire. + timeout := time.Until(dl) + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-timeout", Value: grpcutil.EncodeDuration(timeout)}) + } + for k, v := range authData { + headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)}) + } + for k, v := range callAuthData { + headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)}) + } + if b := stats.OutgoingTags(ctx); b != nil { + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-tags-bin", Value: encodeBinHeader(b)}) + } + if b := stats.OutgoingTrace(ctx); b != nil { + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-trace-bin", Value: encodeBinHeader(b)}) + } + + if md, added, ok := metadata.FromOutgoingContextRaw(ctx); ok { + var k string + for k, vv := range md { + // HTTP doesn't allow you to set pseudoheaders after non pseudoheaders were set. + if isReservedHeader(k) { + continue + } + for _, v := range vv { + headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)}) + } + } + for _, vv := range added { + for i, v := range vv { + if i%2 == 0 { + k = v + continue + } + // HTTP doesn't allow you to set pseudoheaders after non pseudoheaders were set. + if isReservedHeader(k) { + continue + } + headerFields = append(headerFields, hpack.HeaderField{Name: strings.ToLower(k), Value: encodeMetadataHeader(k, v)}) + } + } + } + if md, ok := t.md.(*metadata.MD); ok { + for k, vv := range *md { + if isReservedHeader(k) { + continue + } + for _, v := range vv { + headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)}) + } + } + } + return headerFields, nil +} + +func (t *http2Client) createAudience(callHdr *CallHdr) string { + // Create an audience string only if needed. + if len(t.perRPCCreds) == 0 && callHdr.Creds == nil { + return "" + } + // Construct URI required to get auth request metadata. + // Omit port if it is the default one. + host := strings.TrimSuffix(callHdr.Host, ":443") + pos := strings.LastIndex(callHdr.Method, "/") + if pos == -1 { + pos = len(callHdr.Method) + } + return "https://" + host + callHdr.Method[:pos] +} + +func (t *http2Client) getTrAuthData(ctx context.Context, audience string) (map[string]string, error) { + if len(t.perRPCCreds) == 0 { + return nil, nil + } + authData := map[string]string{} + for _, c := range t.perRPCCreds { + data, err := c.GetRequestMetadata(ctx, audience) + if err != nil { + if _, ok := status.FromError(err); ok { + return nil, err + } + + return nil, status.Errorf(codes.Unauthenticated, "transport: %v", err) + } + for k, v := range data { + // Capital header names are illegal in HTTP/2. + k = strings.ToLower(k) + authData[k] = v + } + } + return authData, nil +} + +func (t *http2Client) getCallAuthData(ctx context.Context, audience string, callHdr *CallHdr) (map[string]string, error) { + var callAuthData map[string]string + // Check if credentials.PerRPCCredentials were provided via call options. + // Note: if these credentials are provided both via dial options and call + // options, then both sets of credentials will be applied. + if callCreds := callHdr.Creds; callCreds != nil { + if !t.isSecure && callCreds.RequireTransportSecurity() { + return nil, status.Error(codes.Unauthenticated, "transport: cannot send secure credentials on an insecure connection") + } + data, err := callCreds.GetRequestMetadata(ctx, audience) + if err != nil { + return nil, status.Errorf(codes.Internal, "transport: %v", err) + } + callAuthData = make(map[string]string, len(data)) + for k, v := range data { + // Capital header names are illegal in HTTP/2 + k = strings.ToLower(k) + callAuthData[k] = v + } + } + return callAuthData, nil +} + +// PerformedIOError wraps an error to indicate IO may have been performed +// before the error occurred. +type PerformedIOError struct { + Err error +} + +// Error implements error. +func (p PerformedIOError) Error() string { + return p.Err.Error() +} + +// NewStream creates a stream and registers it into the transport as "active" +// streams. +func (t *http2Client) NewStream(ctx context.Context, callHdr *CallHdr) (_ *Stream, err error) { + ctx = peer.NewContext(ctx, t.getPeer()) + headerFields, err := t.createHeaderFields(ctx, callHdr) + if err != nil { + // We may have performed I/O in the per-RPC creds callback, so do not + // allow transparent retry. + return nil, PerformedIOError{err} + } + s := t.newStream(ctx, callHdr) + cleanup := func(err error) { + if s.swapState(streamDone) == streamDone { + // If it was already done, return. + return + } + // The stream was unprocessed by the server. + atomic.StoreUint32(&s.unprocessed, 1) + s.write(recvMsg{err: err}) + close(s.done) + // If headerChan isn't closed, then close it. + if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) { + close(s.headerChan) + } + } + hdr := &headerFrame{ + hf: headerFields, + endStream: false, + initStream: func(id uint32) error { + t.mu.Lock() + if state := t.state; state != reachable { + t.mu.Unlock() + // Do a quick cleanup. + err := error(errStreamDrain) + if state == closing { + err = ErrConnClosing + } + cleanup(err) + return err + } + t.activeStreams[id] = s + if channelz.IsOn() { + atomic.AddInt64(&t.czData.streamsStarted, 1) + atomic.StoreInt64(&t.czData.lastStreamCreatedTime, time.Now().UnixNano()) + } + // If the keepalive goroutine has gone dormant, wake it up. + if t.kpDormant { + t.kpDormancyCond.Signal() + } + t.mu.Unlock() + return nil + }, + onOrphaned: cleanup, + wq: s.wq, + } + firstTry := true + var ch chan struct{} + checkForStreamQuota := func(it interface{}) bool { + if t.streamQuota <= 0 { // Can go negative if server decreases it. + if firstTry { + t.waitingStreams++ + } + ch = t.streamsQuotaAvailable + return false + } + if !firstTry { + t.waitingStreams-- + } + t.streamQuota-- + h := it.(*headerFrame) + h.streamID = t.nextID + t.nextID += 2 + s.id = h.streamID + s.fc = &inFlow{limit: uint32(t.initialWindowSize)} + if t.streamQuota > 0 && t.waitingStreams > 0 { + select { + case t.streamsQuotaAvailable <- struct{}{}: + default: + } + } + return true + } + var hdrListSizeErr error + checkForHeaderListSize := func(it interface{}) bool { + if t.maxSendHeaderListSize == nil { + return true + } + hdrFrame := it.(*headerFrame) + var sz int64 + for _, f := range hdrFrame.hf { + if sz += int64(f.Size()); sz > int64(*t.maxSendHeaderListSize) { + hdrListSizeErr = status.Errorf(codes.Internal, "header list size to send violates the maximum size (%d bytes) set by server", *t.maxSendHeaderListSize) + return false + } + } + return true + } + for { + success, err := t.controlBuf.executeAndPut(func(it interface{}) bool { + if !checkForStreamQuota(it) { + return false + } + if !checkForHeaderListSize(it) { + return false + } + return true + }, hdr) + if err != nil { + return nil, err + } + if success { + break + } + if hdrListSizeErr != nil { + return nil, hdrListSizeErr + } + firstTry = false + select { + case <-ch: + case <-s.ctx.Done(): + return nil, ContextErr(s.ctx.Err()) + case <-t.goAway: + return nil, errStreamDrain + case <-t.ctx.Done(): + return nil, ErrConnClosing + } + } + if t.statsHandler != nil { + header, ok := metadata.FromOutgoingContext(ctx) + if ok { + header.Set("user-agent", t.userAgent) + } else { + header = metadata.Pairs("user-agent", t.userAgent) + } + // Note: The header fields are compressed with hpack after this call returns. + // No WireLength field is set here. + outHeader := &stats.OutHeader{ + Client: true, + FullMethod: callHdr.Method, + RemoteAddr: t.remoteAddr, + LocalAddr: t.localAddr, + Compression: callHdr.SendCompress, + Header: header, + } + t.statsHandler.HandleRPC(s.ctx, outHeader) + } + return s, nil +} + +// CloseStream clears the footprint of a stream when the stream is not needed any more. +// This must not be executed in reader's goroutine. +func (t *http2Client) CloseStream(s *Stream, err error) { + var ( + rst bool + rstCode http2.ErrCode + ) + if err != nil { + rst = true + rstCode = http2.ErrCodeCancel + } + t.closeStream(s, err, rst, rstCode, status.Convert(err), nil, false) +} + +func (t *http2Client) closeStream(s *Stream, err error, rst bool, rstCode http2.ErrCode, st *status.Status, mdata map[string][]string, eosReceived bool) { + // Set stream status to done. + if s.swapState(streamDone) == streamDone { + // If it was already done, return. If multiple closeStream calls + // happen simultaneously, wait for the first to finish. + <-s.done + return + } + // status and trailers can be updated here without any synchronization because the stream goroutine will + // only read it after it sees an io.EOF error from read or write and we'll write those errors + // only after updating this. + s.status = st + if len(mdata) > 0 { + s.trailer = mdata + } + if err != nil { + // This will unblock reads eventually. + s.write(recvMsg{err: err}) + } + // If headerChan isn't closed, then close it. + if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) { + s.noHeaders = true + close(s.headerChan) + } + cleanup := &cleanupStream{ + streamID: s.id, + onWrite: func() { + t.mu.Lock() + if t.activeStreams != nil { + delete(t.activeStreams, s.id) + } + t.mu.Unlock() + if channelz.IsOn() { + if eosReceived { + atomic.AddInt64(&t.czData.streamsSucceeded, 1) + } else { + atomic.AddInt64(&t.czData.streamsFailed, 1) + } + } + }, + rst: rst, + rstCode: rstCode, + } + addBackStreamQuota := func(interface{}) bool { + t.streamQuota++ + if t.streamQuota > 0 && t.waitingStreams > 0 { + select { + case t.streamsQuotaAvailable <- struct{}{}: + default: + } + } + return true + } + t.controlBuf.executeAndPut(addBackStreamQuota, cleanup) + // This will unblock write. + close(s.done) +} + +// Close kicks off the shutdown process of the transport. This should be called +// only once on a transport. Once it is called, the transport should not be +// accessed any more. +// +// This method blocks until the addrConn that initiated this transport is +// re-connected. This happens because t.onClose() begins reconnect logic at the +// addrConn level and blocks until the addrConn is successfully connected. +func (t *http2Client) Close() error { + t.mu.Lock() + // Make sure we only Close once. + if t.state == closing { + t.mu.Unlock() + return nil + } + // Call t.onClose before setting the state to closing to prevent the client + // from attempting to create new streams ASAP. + t.onClose() + t.state = closing + streams := t.activeStreams + t.activeStreams = nil + if t.kpDormant { + // If the keepalive goroutine is blocked on this condition variable, we + // should unblock it so that the goroutine eventually exits. + t.kpDormancyCond.Signal() + } + t.mu.Unlock() + t.controlBuf.finish() + t.cancel() + err := t.conn.Close() + if channelz.IsOn() { + channelz.RemoveEntry(t.channelzID) + } + // Notify all active streams. + for _, s := range streams { + t.closeStream(s, ErrConnClosing, false, http2.ErrCodeNo, status.New(codes.Unavailable, ErrConnClosing.Desc), nil, false) + } + if t.statsHandler != nil { + connEnd := &stats.ConnEnd{ + Client: true, + } + t.statsHandler.HandleConn(t.ctx, connEnd) + } + return err +} + +// GracefulClose sets the state to draining, which prevents new streams from +// being created and causes the transport to be closed when the last active +// stream is closed. If there are no active streams, the transport is closed +// immediately. This does nothing if the transport is already draining or +// closing. +func (t *http2Client) GracefulClose() { + t.mu.Lock() + // Make sure we move to draining only from active. + if t.state == draining || t.state == closing { + t.mu.Unlock() + return + } + t.state = draining + active := len(t.activeStreams) + t.mu.Unlock() + if active == 0 { + t.Close() + return + } + t.controlBuf.put(&incomingGoAway{}) +} + +// Write formats the data into HTTP2 data frame(s) and sends it out. The caller +// should proceed only if Write returns nil. +func (t *http2Client) Write(s *Stream, hdr []byte, data []byte, opts *Options) error { + if opts.Last { + // If it's the last message, update stream state. + if !s.compareAndSwapState(streamActive, streamWriteDone) { + return errStreamDone + } + } else if s.getState() != streamActive { + return errStreamDone + } + df := &dataFrame{ + streamID: s.id, + endStream: opts.Last, + h: hdr, + d: data, + } + if hdr != nil || data != nil { // If it's not an empty data frame, check quota. + if err := s.wq.get(int32(len(hdr) + len(data))); err != nil { + return err + } + } + return t.controlBuf.put(df) +} + +func (t *http2Client) getStream(f http2.Frame) *Stream { + t.mu.Lock() + s := t.activeStreams[f.Header().StreamID] + t.mu.Unlock() + return s +} + +// adjustWindow sends out extra window update over the initial window size +// of stream if the application is requesting data larger in size than +// the window. +func (t *http2Client) adjustWindow(s *Stream, n uint32) { + if w := s.fc.maybeAdjust(n); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, increment: w}) + } +} + +// updateWindow adjusts the inbound quota for the stream. +// Window updates will be sent out when the cumulative quota +// exceeds the corresponding threshold. +func (t *http2Client) updateWindow(s *Stream, n uint32) { + if w := s.fc.onRead(n); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, increment: w}) + } +} + +// updateFlowControl updates the incoming flow control windows +// for the transport and the stream based on the current bdp +// estimation. +func (t *http2Client) updateFlowControl(n uint32) { + t.mu.Lock() + for _, s := range t.activeStreams { + s.fc.newLimit(n) + } + t.mu.Unlock() + updateIWS := func(interface{}) bool { + t.initialWindowSize = int32(n) + return true + } + t.controlBuf.executeAndPut(updateIWS, &outgoingWindowUpdate{streamID: 0, increment: t.fc.newLimit(n)}) + t.controlBuf.put(&outgoingSettings{ + ss: []http2.Setting{ + { + ID: http2.SettingInitialWindowSize, + Val: n, + }, + }, + }) +} + +func (t *http2Client) handleData(f *http2.DataFrame) { + size := f.Header().Length + var sendBDPPing bool + if t.bdpEst != nil { + sendBDPPing = t.bdpEst.add(size) + } + // Decouple connection's flow control from application's read. + // An update on connection's flow control should not depend on + // whether user application has read the data or not. Such a + // restriction is already imposed on the stream's flow control, + // and therefore the sender will be blocked anyways. + // Decoupling the connection flow control will prevent other + // active(fast) streams from starving in presence of slow or + // inactive streams. + // + if w := t.fc.onData(size); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{ + streamID: 0, + increment: w, + }) + } + if sendBDPPing { + // Avoid excessive ping detection (e.g. in an L7 proxy) + // by sending a window update prior to the BDP ping. + + if w := t.fc.reset(); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{ + streamID: 0, + increment: w, + }) + } + + t.controlBuf.put(bdpPing) + } + // Select the right stream to dispatch. + s := t.getStream(f) + if s == nil { + return + } + if size > 0 { + if err := s.fc.onData(size); err != nil { + t.closeStream(s, io.EOF, true, http2.ErrCodeFlowControl, status.New(codes.Internal, err.Error()), nil, false) + return + } + if f.Header().Flags.Has(http2.FlagDataPadded) { + if w := s.fc.onRead(size - uint32(len(f.Data()))); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{s.id, w}) + } + } + // TODO(bradfitz, zhaoq): A copy is required here because there is no + // guarantee f.Data() is consumed before the arrival of next frame. + // Can this copy be eliminated? + if len(f.Data()) > 0 { + buffer := t.bufferPool.get() + buffer.Reset() + buffer.Write(f.Data()) + s.write(recvMsg{buffer: buffer}) + } + } + // The server has closed the stream without sending trailers. Record that + // the read direction is closed, and set the status appropriately. + if f.FrameHeader.Flags.Has(http2.FlagDataEndStream) { + t.closeStream(s, io.EOF, false, http2.ErrCodeNo, status.New(codes.Internal, "server closed the stream without sending trailers"), nil, true) + } +} + +func (t *http2Client) handleRSTStream(f *http2.RSTStreamFrame) { + s := t.getStream(f) + if s == nil { + return + } + if f.ErrCode == http2.ErrCodeRefusedStream { + // The stream was unprocessed by the server. + atomic.StoreUint32(&s.unprocessed, 1) + } + statusCode, ok := http2ErrConvTab[f.ErrCode] + if !ok { + if logger.V(logLevel) { + logger.Warningf("transport: http2Client.handleRSTStream found no mapped gRPC status for the received http2 error %v", f.ErrCode) + } + statusCode = codes.Unknown + } + if statusCode == codes.Canceled { + if d, ok := s.ctx.Deadline(); ok && !d.After(time.Now()) { + // Our deadline was already exceeded, and that was likely the cause + // of this cancelation. Alter the status code accordingly. + statusCode = codes.DeadlineExceeded + } + } + t.closeStream(s, io.EOF, false, http2.ErrCodeNo, status.Newf(statusCode, "stream terminated by RST_STREAM with error code: %v", f.ErrCode), nil, false) +} + +func (t *http2Client) handleSettings(f *http2.SettingsFrame, isFirst bool) { + if f.IsAck() { + return + } + var maxStreams *uint32 + var ss []http2.Setting + var updateFuncs []func() + f.ForeachSetting(func(s http2.Setting) error { + switch s.ID { + case http2.SettingMaxConcurrentStreams: + maxStreams = new(uint32) + *maxStreams = s.Val + case http2.SettingMaxHeaderListSize: + updateFuncs = append(updateFuncs, func() { + t.maxSendHeaderListSize = new(uint32) + *t.maxSendHeaderListSize = s.Val + }) + default: + ss = append(ss, s) + } + return nil + }) + if isFirst && maxStreams == nil { + maxStreams = new(uint32) + *maxStreams = math.MaxUint32 + } + sf := &incomingSettings{ + ss: ss, + } + if maxStreams != nil { + updateStreamQuota := func() { + delta := int64(*maxStreams) - int64(t.maxConcurrentStreams) + t.maxConcurrentStreams = *maxStreams + t.streamQuota += delta + if delta > 0 && t.waitingStreams > 0 { + close(t.streamsQuotaAvailable) // wake all of them up. + t.streamsQuotaAvailable = make(chan struct{}, 1) + } + } + updateFuncs = append(updateFuncs, updateStreamQuota) + } + t.controlBuf.executeAndPut(func(interface{}) bool { + for _, f := range updateFuncs { + f() + } + return true + }, sf) +} + +func (t *http2Client) handlePing(f *http2.PingFrame) { + if f.IsAck() { + // Maybe it's a BDP ping. + if t.bdpEst != nil { + t.bdpEst.calculate(f.Data) + } + return + } + pingAck := &ping{ack: true} + copy(pingAck.data[:], f.Data[:]) + t.controlBuf.put(pingAck) +} + +func (t *http2Client) handleGoAway(f *http2.GoAwayFrame) { + t.mu.Lock() + if t.state == closing { + t.mu.Unlock() + return + } + if f.ErrCode == http2.ErrCodeEnhanceYourCalm { + if logger.V(logLevel) { + logger.Infof("Client received GoAway with http2.ErrCodeEnhanceYourCalm.") + } + } + id := f.LastStreamID + if id > 0 && id%2 != 1 { + t.mu.Unlock() + t.Close() + return + } + // A client can receive multiple GoAways from the server (see + // https://github.com/grpc/grpc-go/issues/1387). The idea is that the first + // GoAway will be sent with an ID of MaxInt32 and the second GoAway will be + // sent after an RTT delay with the ID of the last stream the server will + // process. + // + // Therefore, when we get the first GoAway we don't necessarily close any + // streams. While in case of second GoAway we close all streams created after + // the GoAwayId. This way streams that were in-flight while the GoAway from + // server was being sent don't get killed. + select { + case <-t.goAway: // t.goAway has been closed (i.e.,multiple GoAways). + // If there are multiple GoAways the first one should always have an ID greater than the following ones. + if id > t.prevGoAwayID { + t.mu.Unlock() + t.Close() + return + } + default: + t.setGoAwayReason(f) + close(t.goAway) + t.controlBuf.put(&incomingGoAway{}) + // Notify the clientconn about the GOAWAY before we set the state to + // draining, to allow the client to stop attempting to create streams + // before disallowing new streams on this connection. + t.onGoAway(t.goAwayReason) + t.state = draining + } + // All streams with IDs greater than the GoAwayId + // and smaller than the previous GoAway ID should be killed. + upperLimit := t.prevGoAwayID + if upperLimit == 0 { // This is the first GoAway Frame. + upperLimit = math.MaxUint32 // Kill all streams after the GoAway ID. + } + for streamID, stream := range t.activeStreams { + if streamID > id && streamID <= upperLimit { + // The stream was unprocessed by the server. + atomic.StoreUint32(&stream.unprocessed, 1) + t.closeStream(stream, errStreamDrain, false, http2.ErrCodeNo, statusGoAway, nil, false) + } + } + t.prevGoAwayID = id + active := len(t.activeStreams) + t.mu.Unlock() + if active == 0 { + t.Close() + } +} + +// setGoAwayReason sets the value of t.goAwayReason based +// on the GoAway frame received. +// It expects a lock on transport's mutext to be held by +// the caller. +func (t *http2Client) setGoAwayReason(f *http2.GoAwayFrame) { + t.goAwayReason = GoAwayNoReason + switch f.ErrCode { + case http2.ErrCodeEnhanceYourCalm: + if string(f.DebugData()) == "too_many_pings" { + t.goAwayReason = GoAwayTooManyPings + } + } +} + +func (t *http2Client) GetGoAwayReason() GoAwayReason { + t.mu.Lock() + defer t.mu.Unlock() + return t.goAwayReason +} + +func (t *http2Client) handleWindowUpdate(f *http2.WindowUpdateFrame) { + t.controlBuf.put(&incomingWindowUpdate{ + streamID: f.Header().StreamID, + increment: f.Increment, + }) +} + +// operateHeaders takes action on the decoded headers. +func (t *http2Client) operateHeaders(frame *http2.MetaHeadersFrame) { + s := t.getStream(frame) + if s == nil { + return + } + endStream := frame.StreamEnded() + atomic.StoreUint32(&s.bytesReceived, 1) + initialHeader := atomic.LoadUint32(&s.headerChanClosed) == 0 + + if !initialHeader && !endStream { + // As specified by gRPC over HTTP2, a HEADERS frame (and associated CONTINUATION frames) can only appear at the start or end of a stream. Therefore, second HEADERS frame must have EOS bit set. + st := status.New(codes.Internal, "a HEADERS frame cannot appear in the middle of a stream") + t.closeStream(s, st.Err(), true, http2.ErrCodeProtocol, st, nil, false) + return + } + + state := &decodeState{} + // Initialize isGRPC value to be !initialHeader, since if a gRPC Response-Headers has already been received, then it means that the peer is speaking gRPC and we are in gRPC mode. + state.data.isGRPC = !initialHeader + if h2code, err := state.decodeHeader(frame); err != nil { + t.closeStream(s, err, true, h2code, status.Convert(err), nil, endStream) + return + } + + isHeader := false + defer func() { + if t.statsHandler != nil { + if isHeader { + inHeader := &stats.InHeader{ + Client: true, + WireLength: int(frame.Header().Length), + Header: s.header.Copy(), + Compression: s.recvCompress, + } + t.statsHandler.HandleRPC(s.ctx, inHeader) + } else { + inTrailer := &stats.InTrailer{ + Client: true, + WireLength: int(frame.Header().Length), + Trailer: s.trailer.Copy(), + } + t.statsHandler.HandleRPC(s.ctx, inTrailer) + } + } + }() + + // If headerChan hasn't been closed yet + if atomic.CompareAndSwapUint32(&s.headerChanClosed, 0, 1) { + s.headerValid = true + if !endStream { + // HEADERS frame block carries a Response-Headers. + isHeader = true + // These values can be set without any synchronization because + // stream goroutine will read it only after seeing a closed + // headerChan which we'll close after setting this. + s.recvCompress = state.data.encoding + if len(state.data.mdata) > 0 { + s.header = state.data.mdata + } + } else { + // HEADERS frame block carries a Trailers-Only. + s.noHeaders = true + } + close(s.headerChan) + } + + if !endStream { + return + } + + // if client received END_STREAM from server while stream was still active, send RST_STREAM + rst := s.getState() == streamActive + t.closeStream(s, io.EOF, rst, http2.ErrCodeNo, state.status(), state.data.mdata, true) +} + +// reader runs as a separate goroutine in charge of reading data from network +// connection. +// +// TODO(zhaoq): currently one reader per transport. Investigate whether this is +// optimal. +// TODO(zhaoq): Check the validity of the incoming frame sequence. +func (t *http2Client) reader() { + defer close(t.readerDone) + // Check the validity of server preface. + frame, err := t.framer.fr.ReadFrame() + if err != nil { + t.Close() // this kicks off resetTransport, so must be last before return + return + } + t.conn.SetReadDeadline(time.Time{}) // reset deadline once we get the settings frame (we didn't time out, yay!) + if t.keepaliveEnabled { + atomic.StoreInt64(&t.lastRead, time.Now().UnixNano()) + } + sf, ok := frame.(*http2.SettingsFrame) + if !ok { + t.Close() // this kicks off resetTransport, so must be last before return + return + } + t.onPrefaceReceipt() + t.handleSettings(sf, true) + + // loop to keep reading incoming messages on this transport. + for { + t.controlBuf.throttle() + frame, err := t.framer.fr.ReadFrame() + if t.keepaliveEnabled { + atomic.StoreInt64(&t.lastRead, time.Now().UnixNano()) + } + if err != nil { + // Abort an active stream if the http2.Framer returns a + // http2.StreamError. This can happen only if the server's response + // is malformed http2. + if se, ok := err.(http2.StreamError); ok { + t.mu.Lock() + s := t.activeStreams[se.StreamID] + t.mu.Unlock() + if s != nil { + // use error detail to provide better err message + code := http2ErrConvTab[se.Code] + errorDetail := t.framer.fr.ErrorDetail() + var msg string + if errorDetail != nil { + msg = errorDetail.Error() + } else { + msg = "received invalid frame" + } + t.closeStream(s, status.Error(code, msg), true, http2.ErrCodeProtocol, status.New(code, msg), nil, false) + } + continue + } else { + // Transport error. + t.Close() + return + } + } + switch frame := frame.(type) { + case *http2.MetaHeadersFrame: + t.operateHeaders(frame) + case *http2.DataFrame: + t.handleData(frame) + case *http2.RSTStreamFrame: + t.handleRSTStream(frame) + case *http2.SettingsFrame: + t.handleSettings(frame, false) + case *http2.PingFrame: + t.handlePing(frame) + case *http2.GoAwayFrame: + t.handleGoAway(frame) + case *http2.WindowUpdateFrame: + t.handleWindowUpdate(frame) + default: + if logger.V(logLevel) { + logger.Errorf("transport: http2Client.reader got unhandled frame type %v.", frame) + } + } + } +} + +func minTime(a, b time.Duration) time.Duration { + if a < b { + return a + } + return b +} + +// keepalive running in a separate goroutune makes sure the connection is alive by sending pings. +func (t *http2Client) keepalive() { + p := &ping{data: [8]byte{}} + // True iff a ping has been sent, and no data has been received since then. + outstandingPing := false + // Amount of time remaining before which we should receive an ACK for the + // last sent ping. + timeoutLeft := time.Duration(0) + // Records the last value of t.lastRead before we go block on the timer. + // This is required to check for read activity since then. + prevNano := time.Now().UnixNano() + timer := time.NewTimer(t.kp.Time) + for { + select { + case <-timer.C: + lastRead := atomic.LoadInt64(&t.lastRead) + if lastRead > prevNano { + // There has been read activity since the last time we were here. + outstandingPing = false + // Next timer should fire at kp.Time seconds from lastRead time. + timer.Reset(time.Duration(lastRead) + t.kp.Time - time.Duration(time.Now().UnixNano())) + prevNano = lastRead + continue + } + if outstandingPing && timeoutLeft <= 0 { + t.Close() + return + } + t.mu.Lock() + if t.state == closing { + // If the transport is closing, we should exit from the + // keepalive goroutine here. If not, we could have a race + // between the call to Signal() from Close() and the call to + // Wait() here, whereby the keepalive goroutine ends up + // blocking on the condition variable which will never be + // signalled again. + t.mu.Unlock() + return + } + if len(t.activeStreams) < 1 && !t.kp.PermitWithoutStream { + // If a ping was sent out previously (because there were active + // streams at that point) which wasn't acked and its timeout + // hadn't fired, but we got here and are about to go dormant, + // we should make sure that we unconditionally send a ping once + // we awaken. + outstandingPing = false + t.kpDormant = true + t.kpDormancyCond.Wait() + } + t.kpDormant = false + t.mu.Unlock() + + // We get here either because we were dormant and a new stream was + // created which unblocked the Wait() call, or because the + // keepalive timer expired. In both cases, we need to send a ping. + if !outstandingPing { + if channelz.IsOn() { + atomic.AddInt64(&t.czData.kpCount, 1) + } + t.controlBuf.put(p) + timeoutLeft = t.kp.Timeout + outstandingPing = true + } + // The amount of time to sleep here is the minimum of kp.Time and + // timeoutLeft. This will ensure that we wait only for kp.Time + // before sending out the next ping (for cases where the ping is + // acked). + sleepDuration := minTime(t.kp.Time, timeoutLeft) + timeoutLeft -= sleepDuration + timer.Reset(sleepDuration) + case <-t.ctx.Done(): + if !timer.Stop() { + <-timer.C + } + return + } + } +} + +func (t *http2Client) Error() <-chan struct{} { + return t.ctx.Done() +} + +func (t *http2Client) GoAway() <-chan struct{} { + return t.goAway +} + +func (t *http2Client) ChannelzMetric() *channelz.SocketInternalMetric { + s := channelz.SocketInternalMetric{ + StreamsStarted: atomic.LoadInt64(&t.czData.streamsStarted), + StreamsSucceeded: atomic.LoadInt64(&t.czData.streamsSucceeded), + StreamsFailed: atomic.LoadInt64(&t.czData.streamsFailed), + MessagesSent: atomic.LoadInt64(&t.czData.msgSent), + MessagesReceived: atomic.LoadInt64(&t.czData.msgRecv), + KeepAlivesSent: atomic.LoadInt64(&t.czData.kpCount), + LastLocalStreamCreatedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastStreamCreatedTime)), + LastMessageSentTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgSentTime)), + LastMessageReceivedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgRecvTime)), + LocalFlowControlWindow: int64(t.fc.getSize()), + SocketOptions: channelz.GetSocketOption(t.conn), + LocalAddr: t.localAddr, + RemoteAddr: t.remoteAddr, + // RemoteName : + } + if au, ok := t.authInfo.(credentials.ChannelzSecurityInfo); ok { + s.Security = au.GetSecurityValue() + } + s.RemoteFlowControlWindow = t.getOutFlowWindow() + return &s +} + +func (t *http2Client) RemoteAddr() net.Addr { return t.remoteAddr } + +func (t *http2Client) IncrMsgSent() { + atomic.AddInt64(&t.czData.msgSent, 1) + atomic.StoreInt64(&t.czData.lastMsgSentTime, time.Now().UnixNano()) +} + +func (t *http2Client) IncrMsgRecv() { + atomic.AddInt64(&t.czData.msgRecv, 1) + atomic.StoreInt64(&t.czData.lastMsgRecvTime, time.Now().UnixNano()) +} + +func (t *http2Client) getOutFlowWindow() int64 { + resp := make(chan uint32, 1) + timer := time.NewTimer(time.Second) + defer timer.Stop() + t.controlBuf.put(&outFlowControlSizeRequest{resp}) + select { + case sz := <-resp: + return int64(sz) + case <-t.ctxDone: + return -1 + case <-timer.C: + return -2 + } +} diff --git a/vendor/google.golang.org/grpc/internal/transport/http2_server.go b/vendor/google.golang.org/grpc/internal/transport/http2_server.go new file mode 100644 index 000000000..0cf1cc320 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/http2_server.go @@ -0,0 +1,1268 @@ +/* + * + * Copyright 2014 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "bytes" + "context" + "errors" + "fmt" + "io" + "math" + "net" + "strconv" + "sync" + "sync/atomic" + "time" + + "github.com/golang/protobuf/proto" + "golang.org/x/net/http2" + "golang.org/x/net/http2/hpack" + "google.golang.org/grpc/internal/grpcutil" + + "google.golang.org/grpc/codes" + "google.golang.org/grpc/credentials" + "google.golang.org/grpc/internal/channelz" + "google.golang.org/grpc/internal/grpcrand" + "google.golang.org/grpc/keepalive" + "google.golang.org/grpc/metadata" + "google.golang.org/grpc/peer" + "google.golang.org/grpc/stats" + "google.golang.org/grpc/status" + "google.golang.org/grpc/tap" +) + +var ( + // ErrIllegalHeaderWrite indicates that setting header is illegal because of + // the stream's state. + ErrIllegalHeaderWrite = errors.New("transport: the stream is done or WriteHeader was already called") + // ErrHeaderListSizeLimitViolation indicates that the header list size is larger + // than the limit set by peer. + ErrHeaderListSizeLimitViolation = errors.New("transport: trying to send header list size larger than the limit set by peer") +) + +// serverConnectionCounter counts the number of connections a server has seen +// (equal to the number of http2Servers created). Must be accessed atomically. +var serverConnectionCounter uint64 + +// http2Server implements the ServerTransport interface with HTTP2. +type http2Server struct { + lastRead int64 // Keep this field 64-bit aligned. Accessed atomically. + ctx context.Context + done chan struct{} + conn net.Conn + loopy *loopyWriter + readerDone chan struct{} // sync point to enable testing. + writerDone chan struct{} // sync point to enable testing. + remoteAddr net.Addr + localAddr net.Addr + maxStreamID uint32 // max stream ID ever seen + authInfo credentials.AuthInfo // auth info about the connection + inTapHandle tap.ServerInHandle + framer *framer + // The max number of concurrent streams. + maxStreams uint32 + // controlBuf delivers all the control related tasks (e.g., window + // updates, reset streams, and various settings) to the controller. + controlBuf *controlBuffer + fc *trInFlow + stats stats.Handler + // Keepalive and max-age parameters for the server. + kp keepalive.ServerParameters + // Keepalive enforcement policy. + kep keepalive.EnforcementPolicy + // The time instance last ping was received. + lastPingAt time.Time + // Number of times the client has violated keepalive ping policy so far. + pingStrikes uint8 + // Flag to signify that number of ping strikes should be reset to 0. + // This is set whenever data or header frames are sent. + // 1 means yes. + resetPingStrikes uint32 // Accessed atomically. + initialWindowSize int32 + bdpEst *bdpEstimator + maxSendHeaderListSize *uint32 + + mu sync.Mutex // guard the following + + // drainChan is initialized when drain(...) is called the first time. + // After which the server writes out the first GoAway(with ID 2^31-1) frame. + // Then an independent goroutine will be launched to later send the second GoAway. + // During this time we don't want to write another first GoAway(with ID 2^31 -1) frame. + // Thus call to drain(...) will be a no-op if drainChan is already initialized since draining is + // already underway. + drainChan chan struct{} + state transportState + activeStreams map[uint32]*Stream + // idle is the time instant when the connection went idle. + // This is either the beginning of the connection or when the number of + // RPCs go down to 0. + // When the connection is busy, this value is set to 0. + idle time.Time + + // Fields below are for channelz metric collection. + channelzID int64 // channelz unique identification number + czData *channelzData + bufferPool *bufferPool + + connectionID uint64 +} + +// newHTTP2Server constructs a ServerTransport based on HTTP2. ConnectionError is +// returned if something goes wrong. +func newHTTP2Server(conn net.Conn, config *ServerConfig) (_ ServerTransport, err error) { + writeBufSize := config.WriteBufferSize + readBufSize := config.ReadBufferSize + maxHeaderListSize := defaultServerMaxHeaderListSize + if config.MaxHeaderListSize != nil { + maxHeaderListSize = *config.MaxHeaderListSize + } + framer := newFramer(conn, writeBufSize, readBufSize, maxHeaderListSize) + // Send initial settings as connection preface to client. + isettings := []http2.Setting{{ + ID: http2.SettingMaxFrameSize, + Val: http2MaxFrameLen, + }} + // TODO(zhaoq): Have a better way to signal "no limit" because 0 is + // permitted in the HTTP2 spec. + maxStreams := config.MaxStreams + if maxStreams == 0 { + maxStreams = math.MaxUint32 + } else { + isettings = append(isettings, http2.Setting{ + ID: http2.SettingMaxConcurrentStreams, + Val: maxStreams, + }) + } + dynamicWindow := true + iwz := int32(initialWindowSize) + if config.InitialWindowSize >= defaultWindowSize { + iwz = config.InitialWindowSize + dynamicWindow = false + } + icwz := int32(initialWindowSize) + if config.InitialConnWindowSize >= defaultWindowSize { + icwz = config.InitialConnWindowSize + dynamicWindow = false + } + if iwz != defaultWindowSize { + isettings = append(isettings, http2.Setting{ + ID: http2.SettingInitialWindowSize, + Val: uint32(iwz)}) + } + if config.MaxHeaderListSize != nil { + isettings = append(isettings, http2.Setting{ + ID: http2.SettingMaxHeaderListSize, + Val: *config.MaxHeaderListSize, + }) + } + if config.HeaderTableSize != nil { + isettings = append(isettings, http2.Setting{ + ID: http2.SettingHeaderTableSize, + Val: *config.HeaderTableSize, + }) + } + if err := framer.fr.WriteSettings(isettings...); err != nil { + return nil, connectionErrorf(false, err, "transport: %v", err) + } + // Adjust the connection flow control window if needed. + if delta := uint32(icwz - defaultWindowSize); delta > 0 { + if err := framer.fr.WriteWindowUpdate(0, delta); err != nil { + return nil, connectionErrorf(false, err, "transport: %v", err) + } + } + kp := config.KeepaliveParams + if kp.MaxConnectionIdle == 0 { + kp.MaxConnectionIdle = defaultMaxConnectionIdle + } + if kp.MaxConnectionAge == 0 { + kp.MaxConnectionAge = defaultMaxConnectionAge + } + // Add a jitter to MaxConnectionAge. + kp.MaxConnectionAge += getJitter(kp.MaxConnectionAge) + if kp.MaxConnectionAgeGrace == 0 { + kp.MaxConnectionAgeGrace = defaultMaxConnectionAgeGrace + } + if kp.Time == 0 { + kp.Time = defaultServerKeepaliveTime + } + if kp.Timeout == 0 { + kp.Timeout = defaultServerKeepaliveTimeout + } + kep := config.KeepalivePolicy + if kep.MinTime == 0 { + kep.MinTime = defaultKeepalivePolicyMinTime + } + done := make(chan struct{}) + t := &http2Server{ + ctx: context.Background(), + done: done, + conn: conn, + remoteAddr: conn.RemoteAddr(), + localAddr: conn.LocalAddr(), + authInfo: config.AuthInfo, + framer: framer, + readerDone: make(chan struct{}), + writerDone: make(chan struct{}), + maxStreams: maxStreams, + inTapHandle: config.InTapHandle, + fc: &trInFlow{limit: uint32(icwz)}, + state: reachable, + activeStreams: make(map[uint32]*Stream), + stats: config.StatsHandler, + kp: kp, + idle: time.Now(), + kep: kep, + initialWindowSize: iwz, + czData: new(channelzData), + bufferPool: newBufferPool(), + } + t.controlBuf = newControlBuffer(t.done) + if dynamicWindow { + t.bdpEst = &bdpEstimator{ + bdp: initialWindowSize, + updateFlowControl: t.updateFlowControl, + } + } + if t.stats != nil { + t.ctx = t.stats.TagConn(t.ctx, &stats.ConnTagInfo{ + RemoteAddr: t.remoteAddr, + LocalAddr: t.localAddr, + }) + connBegin := &stats.ConnBegin{} + t.stats.HandleConn(t.ctx, connBegin) + } + if channelz.IsOn() { + t.channelzID = channelz.RegisterNormalSocket(t, config.ChannelzParentID, fmt.Sprintf("%s -> %s", t.remoteAddr, t.localAddr)) + } + + t.connectionID = atomic.AddUint64(&serverConnectionCounter, 1) + + t.framer.writer.Flush() + + defer func() { + if err != nil { + t.Close() + } + }() + + // Check the validity of client preface. + preface := make([]byte, len(clientPreface)) + if _, err := io.ReadFull(t.conn, preface); err != nil { + return nil, connectionErrorf(false, err, "transport: http2Server.HandleStreams failed to receive the preface from client: %v", err) + } + if !bytes.Equal(preface, clientPreface) { + return nil, connectionErrorf(false, nil, "transport: http2Server.HandleStreams received bogus greeting from client: %q", preface) + } + + frame, err := t.framer.fr.ReadFrame() + if err == io.EOF || err == io.ErrUnexpectedEOF { + return nil, err + } + if err != nil { + return nil, connectionErrorf(false, err, "transport: http2Server.HandleStreams failed to read initial settings frame: %v", err) + } + atomic.StoreInt64(&t.lastRead, time.Now().UnixNano()) + sf, ok := frame.(*http2.SettingsFrame) + if !ok { + return nil, connectionErrorf(false, nil, "transport: http2Server.HandleStreams saw invalid preface type %T from client", frame) + } + t.handleSettings(sf) + + go func() { + t.loopy = newLoopyWriter(serverSide, t.framer, t.controlBuf, t.bdpEst) + t.loopy.ssGoAwayHandler = t.outgoingGoAwayHandler + if err := t.loopy.run(); err != nil { + if logger.V(logLevel) { + logger.Errorf("transport: loopyWriter.run returning. Err: %v", err) + } + } + t.conn.Close() + close(t.writerDone) + }() + go t.keepalive() + return t, nil +} + +// operateHeader takes action on the decoded headers. +func (t *http2Server) operateHeaders(frame *http2.MetaHeadersFrame, handle func(*Stream), traceCtx func(context.Context, string) context.Context) (fatal bool) { + streamID := frame.Header().StreamID + state := &decodeState{ + serverSide: true, + } + if h2code, err := state.decodeHeader(frame); err != nil { + if _, ok := status.FromError(err); ok { + t.controlBuf.put(&cleanupStream{ + streamID: streamID, + rst: true, + rstCode: h2code, + onWrite: func() {}, + }) + } + return false + } + + buf := newRecvBuffer() + s := &Stream{ + id: streamID, + st: t, + buf: buf, + fc: &inFlow{limit: uint32(t.initialWindowSize)}, + recvCompress: state.data.encoding, + method: state.data.method, + contentSubtype: state.data.contentSubtype, + } + if frame.StreamEnded() { + // s is just created by the caller. No lock needed. + s.state = streamReadDone + } + if state.data.timeoutSet { + s.ctx, s.cancel = context.WithTimeout(t.ctx, state.data.timeout) + } else { + s.ctx, s.cancel = context.WithCancel(t.ctx) + } + pr := &peer.Peer{ + Addr: t.remoteAddr, + } + // Attach Auth info if there is any. + if t.authInfo != nil { + pr.AuthInfo = t.authInfo + } + s.ctx = peer.NewContext(s.ctx, pr) + // Attach the received metadata to the context. + if len(state.data.mdata) > 0 { + s.ctx = metadata.NewIncomingContext(s.ctx, state.data.mdata) + } + if state.data.statsTags != nil { + s.ctx = stats.SetIncomingTags(s.ctx, state.data.statsTags) + } + if state.data.statsTrace != nil { + s.ctx = stats.SetIncomingTrace(s.ctx, state.data.statsTrace) + } + if t.inTapHandle != nil { + var err error + info := &tap.Info{ + FullMethodName: state.data.method, + } + s.ctx, err = t.inTapHandle(s.ctx, info) + if err != nil { + if logger.V(logLevel) { + logger.Warningf("transport: http2Server.operateHeaders got an error from InTapHandle: %v", err) + } + t.controlBuf.put(&cleanupStream{ + streamID: s.id, + rst: true, + rstCode: http2.ErrCodeRefusedStream, + onWrite: func() {}, + }) + s.cancel() + return false + } + } + t.mu.Lock() + if t.state != reachable { + t.mu.Unlock() + s.cancel() + return false + } + if uint32(len(t.activeStreams)) >= t.maxStreams { + t.mu.Unlock() + t.controlBuf.put(&cleanupStream{ + streamID: streamID, + rst: true, + rstCode: http2.ErrCodeRefusedStream, + onWrite: func() {}, + }) + s.cancel() + return false + } + if streamID%2 != 1 || streamID <= t.maxStreamID { + t.mu.Unlock() + // illegal gRPC stream id. + if logger.V(logLevel) { + logger.Errorf("transport: http2Server.HandleStreams received an illegal stream id: %v", streamID) + } + s.cancel() + return true + } + t.maxStreamID = streamID + t.activeStreams[streamID] = s + if len(t.activeStreams) == 1 { + t.idle = time.Time{} + } + t.mu.Unlock() + if channelz.IsOn() { + atomic.AddInt64(&t.czData.streamsStarted, 1) + atomic.StoreInt64(&t.czData.lastStreamCreatedTime, time.Now().UnixNano()) + } + s.requestRead = func(n int) { + t.adjustWindow(s, uint32(n)) + } + s.ctx = traceCtx(s.ctx, s.method) + if t.stats != nil { + s.ctx = t.stats.TagRPC(s.ctx, &stats.RPCTagInfo{FullMethodName: s.method}) + inHeader := &stats.InHeader{ + FullMethod: s.method, + RemoteAddr: t.remoteAddr, + LocalAddr: t.localAddr, + Compression: s.recvCompress, + WireLength: int(frame.Header().Length), + Header: metadata.MD(state.data.mdata).Copy(), + } + t.stats.HandleRPC(s.ctx, inHeader) + } + s.ctxDone = s.ctx.Done() + s.wq = newWriteQuota(defaultWriteQuota, s.ctxDone) + s.trReader = &transportReader{ + reader: &recvBufferReader{ + ctx: s.ctx, + ctxDone: s.ctxDone, + recv: s.buf, + freeBuffer: t.bufferPool.put, + }, + windowHandler: func(n int) { + t.updateWindow(s, uint32(n)) + }, + } + // Register the stream with loopy. + t.controlBuf.put(®isterStream{ + streamID: s.id, + wq: s.wq, + }) + handle(s) + return false +} + +// HandleStreams receives incoming streams using the given handler. This is +// typically run in a separate goroutine. +// traceCtx attaches trace to ctx and returns the new context. +func (t *http2Server) HandleStreams(handle func(*Stream), traceCtx func(context.Context, string) context.Context) { + defer close(t.readerDone) + for { + t.controlBuf.throttle() + frame, err := t.framer.fr.ReadFrame() + atomic.StoreInt64(&t.lastRead, time.Now().UnixNano()) + if err != nil { + if se, ok := err.(http2.StreamError); ok { + if logger.V(logLevel) { + logger.Warningf("transport: http2Server.HandleStreams encountered http2.StreamError: %v", se) + } + t.mu.Lock() + s := t.activeStreams[se.StreamID] + t.mu.Unlock() + if s != nil { + t.closeStream(s, true, se.Code, false) + } else { + t.controlBuf.put(&cleanupStream{ + streamID: se.StreamID, + rst: true, + rstCode: se.Code, + onWrite: func() {}, + }) + } + continue + } + if err == io.EOF || err == io.ErrUnexpectedEOF { + t.Close() + return + } + if logger.V(logLevel) { + logger.Warningf("transport: http2Server.HandleStreams failed to read frame: %v", err) + } + t.Close() + return + } + switch frame := frame.(type) { + case *http2.MetaHeadersFrame: + if t.operateHeaders(frame, handle, traceCtx) { + t.Close() + break + } + case *http2.DataFrame: + t.handleData(frame) + case *http2.RSTStreamFrame: + t.handleRSTStream(frame) + case *http2.SettingsFrame: + t.handleSettings(frame) + case *http2.PingFrame: + t.handlePing(frame) + case *http2.WindowUpdateFrame: + t.handleWindowUpdate(frame) + case *http2.GoAwayFrame: + // TODO: Handle GoAway from the client appropriately. + default: + if logger.V(logLevel) { + logger.Errorf("transport: http2Server.HandleStreams found unhandled frame type %v.", frame) + } + } + } +} + +func (t *http2Server) getStream(f http2.Frame) (*Stream, bool) { + t.mu.Lock() + defer t.mu.Unlock() + if t.activeStreams == nil { + // The transport is closing. + return nil, false + } + s, ok := t.activeStreams[f.Header().StreamID] + if !ok { + // The stream is already done. + return nil, false + } + return s, true +} + +// adjustWindow sends out extra window update over the initial window size +// of stream if the application is requesting data larger in size than +// the window. +func (t *http2Server) adjustWindow(s *Stream, n uint32) { + if w := s.fc.maybeAdjust(n); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, increment: w}) + } + +} + +// updateWindow adjusts the inbound quota for the stream and the transport. +// Window updates will deliver to the controller for sending when +// the cumulative quota exceeds the corresponding threshold. +func (t *http2Server) updateWindow(s *Stream, n uint32) { + if w := s.fc.onRead(n); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{streamID: s.id, + increment: w, + }) + } +} + +// updateFlowControl updates the incoming flow control windows +// for the transport and the stream based on the current bdp +// estimation. +func (t *http2Server) updateFlowControl(n uint32) { + t.mu.Lock() + for _, s := range t.activeStreams { + s.fc.newLimit(n) + } + t.initialWindowSize = int32(n) + t.mu.Unlock() + t.controlBuf.put(&outgoingWindowUpdate{ + streamID: 0, + increment: t.fc.newLimit(n), + }) + t.controlBuf.put(&outgoingSettings{ + ss: []http2.Setting{ + { + ID: http2.SettingInitialWindowSize, + Val: n, + }, + }, + }) + +} + +func (t *http2Server) handleData(f *http2.DataFrame) { + size := f.Header().Length + var sendBDPPing bool + if t.bdpEst != nil { + sendBDPPing = t.bdpEst.add(size) + } + // Decouple connection's flow control from application's read. + // An update on connection's flow control should not depend on + // whether user application has read the data or not. Such a + // restriction is already imposed on the stream's flow control, + // and therefore the sender will be blocked anyways. + // Decoupling the connection flow control will prevent other + // active(fast) streams from starving in presence of slow or + // inactive streams. + if w := t.fc.onData(size); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{ + streamID: 0, + increment: w, + }) + } + if sendBDPPing { + // Avoid excessive ping detection (e.g. in an L7 proxy) + // by sending a window update prior to the BDP ping. + if w := t.fc.reset(); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{ + streamID: 0, + increment: w, + }) + } + t.controlBuf.put(bdpPing) + } + // Select the right stream to dispatch. + s, ok := t.getStream(f) + if !ok { + return + } + if s.getState() == streamReadDone { + t.closeStream(s, true, http2.ErrCodeStreamClosed, false) + return + } + if size > 0 { + if err := s.fc.onData(size); err != nil { + t.closeStream(s, true, http2.ErrCodeFlowControl, false) + return + } + if f.Header().Flags.Has(http2.FlagDataPadded) { + if w := s.fc.onRead(size - uint32(len(f.Data()))); w > 0 { + t.controlBuf.put(&outgoingWindowUpdate{s.id, w}) + } + } + // TODO(bradfitz, zhaoq): A copy is required here because there is no + // guarantee f.Data() is consumed before the arrival of next frame. + // Can this copy be eliminated? + if len(f.Data()) > 0 { + buffer := t.bufferPool.get() + buffer.Reset() + buffer.Write(f.Data()) + s.write(recvMsg{buffer: buffer}) + } + } + if f.Header().Flags.Has(http2.FlagDataEndStream) { + // Received the end of stream from the client. + s.compareAndSwapState(streamActive, streamReadDone) + s.write(recvMsg{err: io.EOF}) + } +} + +func (t *http2Server) handleRSTStream(f *http2.RSTStreamFrame) { + // If the stream is not deleted from the transport's active streams map, then do a regular close stream. + if s, ok := t.getStream(f); ok { + t.closeStream(s, false, 0, false) + return + } + // If the stream is already deleted from the active streams map, then put a cleanupStream item into controlbuf to delete the stream from loopy writer's established streams map. + t.controlBuf.put(&cleanupStream{ + streamID: f.Header().StreamID, + rst: false, + rstCode: 0, + onWrite: func() {}, + }) +} + +func (t *http2Server) handleSettings(f *http2.SettingsFrame) { + if f.IsAck() { + return + } + var ss []http2.Setting + var updateFuncs []func() + f.ForeachSetting(func(s http2.Setting) error { + switch s.ID { + case http2.SettingMaxHeaderListSize: + updateFuncs = append(updateFuncs, func() { + t.maxSendHeaderListSize = new(uint32) + *t.maxSendHeaderListSize = s.Val + }) + default: + ss = append(ss, s) + } + return nil + }) + t.controlBuf.executeAndPut(func(interface{}) bool { + for _, f := range updateFuncs { + f() + } + return true + }, &incomingSettings{ + ss: ss, + }) +} + +const ( + maxPingStrikes = 2 + defaultPingTimeout = 2 * time.Hour +) + +func (t *http2Server) handlePing(f *http2.PingFrame) { + if f.IsAck() { + if f.Data == goAwayPing.data && t.drainChan != nil { + close(t.drainChan) + return + } + // Maybe it's a BDP ping. + if t.bdpEst != nil { + t.bdpEst.calculate(f.Data) + } + return + } + pingAck := &ping{ack: true} + copy(pingAck.data[:], f.Data[:]) + t.controlBuf.put(pingAck) + + now := time.Now() + defer func() { + t.lastPingAt = now + }() + // A reset ping strikes means that we don't need to check for policy + // violation for this ping and the pingStrikes counter should be set + // to 0. + if atomic.CompareAndSwapUint32(&t.resetPingStrikes, 1, 0) { + t.pingStrikes = 0 + return + } + t.mu.Lock() + ns := len(t.activeStreams) + t.mu.Unlock() + if ns < 1 && !t.kep.PermitWithoutStream { + // Keepalive shouldn't be active thus, this new ping should + // have come after at least defaultPingTimeout. + if t.lastPingAt.Add(defaultPingTimeout).After(now) { + t.pingStrikes++ + } + } else { + // Check if keepalive policy is respected. + if t.lastPingAt.Add(t.kep.MinTime).After(now) { + t.pingStrikes++ + } + } + + if t.pingStrikes > maxPingStrikes { + // Send goaway and close the connection. + if logger.V(logLevel) { + logger.Errorf("transport: Got too many pings from the client, closing the connection.") + } + t.controlBuf.put(&goAway{code: http2.ErrCodeEnhanceYourCalm, debugData: []byte("too_many_pings"), closeConn: true}) + } +} + +func (t *http2Server) handleWindowUpdate(f *http2.WindowUpdateFrame) { + t.controlBuf.put(&incomingWindowUpdate{ + streamID: f.Header().StreamID, + increment: f.Increment, + }) +} + +func appendHeaderFieldsFromMD(headerFields []hpack.HeaderField, md metadata.MD) []hpack.HeaderField { + for k, vv := range md { + if isReservedHeader(k) { + // Clients don't tolerate reading restricted headers after some non restricted ones were sent. + continue + } + for _, v := range vv { + headerFields = append(headerFields, hpack.HeaderField{Name: k, Value: encodeMetadataHeader(k, v)}) + } + } + return headerFields +} + +func (t *http2Server) checkForHeaderListSize(it interface{}) bool { + if t.maxSendHeaderListSize == nil { + return true + } + hdrFrame := it.(*headerFrame) + var sz int64 + for _, f := range hdrFrame.hf { + if sz += int64(f.Size()); sz > int64(*t.maxSendHeaderListSize) { + if logger.V(logLevel) { + logger.Errorf("header list size to send violates the maximum size (%d bytes) set by client", *t.maxSendHeaderListSize) + } + return false + } + } + return true +} + +// WriteHeader sends the header metadata md back to the client. +func (t *http2Server) WriteHeader(s *Stream, md metadata.MD) error { + if s.updateHeaderSent() || s.getState() == streamDone { + return ErrIllegalHeaderWrite + } + s.hdrMu.Lock() + if md.Len() > 0 { + if s.header.Len() > 0 { + s.header = metadata.Join(s.header, md) + } else { + s.header = md + } + } + if err := t.writeHeaderLocked(s); err != nil { + s.hdrMu.Unlock() + return err + } + s.hdrMu.Unlock() + return nil +} + +func (t *http2Server) setResetPingStrikes() { + atomic.StoreUint32(&t.resetPingStrikes, 1) +} + +func (t *http2Server) writeHeaderLocked(s *Stream) error { + // TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields + // first and create a slice of that exact size. + headerFields := make([]hpack.HeaderField, 0, 2) // at least :status, content-type will be there if none else. + headerFields = append(headerFields, hpack.HeaderField{Name: ":status", Value: "200"}) + headerFields = append(headerFields, hpack.HeaderField{Name: "content-type", Value: grpcutil.ContentType(s.contentSubtype)}) + if s.sendCompress != "" { + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-encoding", Value: s.sendCompress}) + } + headerFields = appendHeaderFieldsFromMD(headerFields, s.header) + success, err := t.controlBuf.executeAndPut(t.checkForHeaderListSize, &headerFrame{ + streamID: s.id, + hf: headerFields, + endStream: false, + onWrite: t.setResetPingStrikes, + }) + if !success { + if err != nil { + return err + } + t.closeStream(s, true, http2.ErrCodeInternal, false) + return ErrHeaderListSizeLimitViolation + } + if t.stats != nil { + // Note: Headers are compressed with hpack after this call returns. + // No WireLength field is set here. + outHeader := &stats.OutHeader{ + Header: s.header.Copy(), + Compression: s.sendCompress, + } + t.stats.HandleRPC(s.Context(), outHeader) + } + return nil +} + +// WriteStatus sends stream status to the client and terminates the stream. +// There is no further I/O operations being able to perform on this stream. +// TODO(zhaoq): Now it indicates the end of entire stream. Revisit if early +// OK is adopted. +func (t *http2Server) WriteStatus(s *Stream, st *status.Status) error { + if s.getState() == streamDone { + return nil + } + s.hdrMu.Lock() + // TODO(mmukhi): Benchmark if the performance gets better if count the metadata and other header fields + // first and create a slice of that exact size. + headerFields := make([]hpack.HeaderField, 0, 2) // grpc-status and grpc-message will be there if none else. + if !s.updateHeaderSent() { // No headers have been sent. + if len(s.header) > 0 { // Send a separate header frame. + if err := t.writeHeaderLocked(s); err != nil { + s.hdrMu.Unlock() + return err + } + } else { // Send a trailer only response. + headerFields = append(headerFields, hpack.HeaderField{Name: ":status", Value: "200"}) + headerFields = append(headerFields, hpack.HeaderField{Name: "content-type", Value: grpcutil.ContentType(s.contentSubtype)}) + } + } + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-status", Value: strconv.Itoa(int(st.Code()))}) + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-message", Value: encodeGrpcMessage(st.Message())}) + + if p := st.Proto(); p != nil && len(p.Details) > 0 { + stBytes, err := proto.Marshal(p) + if err != nil { + // TODO: return error instead, when callers are able to handle it. + logger.Errorf("transport: failed to marshal rpc status: %v, error: %v", p, err) + } else { + headerFields = append(headerFields, hpack.HeaderField{Name: "grpc-status-details-bin", Value: encodeBinHeader(stBytes)}) + } + } + + // Attach the trailer metadata. + headerFields = appendHeaderFieldsFromMD(headerFields, s.trailer) + trailingHeader := &headerFrame{ + streamID: s.id, + hf: headerFields, + endStream: true, + onWrite: t.setResetPingStrikes, + } + s.hdrMu.Unlock() + success, err := t.controlBuf.execute(t.checkForHeaderListSize, trailingHeader) + if !success { + if err != nil { + return err + } + t.closeStream(s, true, http2.ErrCodeInternal, false) + return ErrHeaderListSizeLimitViolation + } + // Send a RST_STREAM after the trailers if the client has not already half-closed. + rst := s.getState() == streamActive + t.finishStream(s, rst, http2.ErrCodeNo, trailingHeader, true) + if t.stats != nil { + // Note: The trailer fields are compressed with hpack after this call returns. + // No WireLength field is set here. + t.stats.HandleRPC(s.Context(), &stats.OutTrailer{ + Trailer: s.trailer.Copy(), + }) + } + return nil +} + +// Write converts the data into HTTP2 data frame and sends it out. Non-nil error +// is returns if it fails (e.g., framing error, transport error). +func (t *http2Server) Write(s *Stream, hdr []byte, data []byte, opts *Options) error { + if !s.isHeaderSent() { // Headers haven't been written yet. + if err := t.WriteHeader(s, nil); err != nil { + if _, ok := err.(ConnectionError); ok { + return err + } + // TODO(mmukhi, dfawley): Make sure this is the right code to return. + return status.Errorf(codes.Internal, "transport: %v", err) + } + } else { + // Writing headers checks for this condition. + if s.getState() == streamDone { + // TODO(mmukhi, dfawley): Should the server write also return io.EOF? + s.cancel() + select { + case <-t.done: + return ErrConnClosing + default: + } + return ContextErr(s.ctx.Err()) + } + } + df := &dataFrame{ + streamID: s.id, + h: hdr, + d: data, + onEachWrite: t.setResetPingStrikes, + } + if err := s.wq.get(int32(len(hdr) + len(data))); err != nil { + select { + case <-t.done: + return ErrConnClosing + default: + } + return ContextErr(s.ctx.Err()) + } + return t.controlBuf.put(df) +} + +// keepalive running in a separate goroutine does the following: +// 1. Gracefully closes an idle connection after a duration of keepalive.MaxConnectionIdle. +// 2. Gracefully closes any connection after a duration of keepalive.MaxConnectionAge. +// 3. Forcibly closes a connection after an additive period of keepalive.MaxConnectionAgeGrace over keepalive.MaxConnectionAge. +// 4. Makes sure a connection is alive by sending pings with a frequency of keepalive.Time and closes a non-responsive connection +// after an additional duration of keepalive.Timeout. +func (t *http2Server) keepalive() { + p := &ping{} + // True iff a ping has been sent, and no data has been received since then. + outstandingPing := false + // Amount of time remaining before which we should receive an ACK for the + // last sent ping. + kpTimeoutLeft := time.Duration(0) + // Records the last value of t.lastRead before we go block on the timer. + // This is required to check for read activity since then. + prevNano := time.Now().UnixNano() + // Initialize the different timers to their default values. + idleTimer := time.NewTimer(t.kp.MaxConnectionIdle) + ageTimer := time.NewTimer(t.kp.MaxConnectionAge) + kpTimer := time.NewTimer(t.kp.Time) + defer func() { + // We need to drain the underlying channel in these timers after a call + // to Stop(), only if we are interested in resetting them. Clearly we + // are not interested in resetting them here. + idleTimer.Stop() + ageTimer.Stop() + kpTimer.Stop() + }() + + for { + select { + case <-idleTimer.C: + t.mu.Lock() + idle := t.idle + if idle.IsZero() { // The connection is non-idle. + t.mu.Unlock() + idleTimer.Reset(t.kp.MaxConnectionIdle) + continue + } + val := t.kp.MaxConnectionIdle - time.Since(idle) + t.mu.Unlock() + if val <= 0 { + // The connection has been idle for a duration of keepalive.MaxConnectionIdle or more. + // Gracefully close the connection. + t.drain(http2.ErrCodeNo, []byte{}) + return + } + idleTimer.Reset(val) + case <-ageTimer.C: + t.drain(http2.ErrCodeNo, []byte{}) + ageTimer.Reset(t.kp.MaxConnectionAgeGrace) + select { + case <-ageTimer.C: + // Close the connection after grace period. + if logger.V(logLevel) { + logger.Infof("transport: closing server transport due to maximum connection age.") + } + t.Close() + case <-t.done: + } + return + case <-kpTimer.C: + lastRead := atomic.LoadInt64(&t.lastRead) + if lastRead > prevNano { + // There has been read activity since the last time we were + // here. Setup the timer to fire at kp.Time seconds from + // lastRead time and continue. + outstandingPing = false + kpTimer.Reset(time.Duration(lastRead) + t.kp.Time - time.Duration(time.Now().UnixNano())) + prevNano = lastRead + continue + } + if outstandingPing && kpTimeoutLeft <= 0 { + if logger.V(logLevel) { + logger.Infof("transport: closing server transport due to idleness.") + } + t.Close() + return + } + if !outstandingPing { + if channelz.IsOn() { + atomic.AddInt64(&t.czData.kpCount, 1) + } + t.controlBuf.put(p) + kpTimeoutLeft = t.kp.Timeout + outstandingPing = true + } + // The amount of time to sleep here is the minimum of kp.Time and + // timeoutLeft. This will ensure that we wait only for kp.Time + // before sending out the next ping (for cases where the ping is + // acked). + sleepDuration := minTime(t.kp.Time, kpTimeoutLeft) + kpTimeoutLeft -= sleepDuration + kpTimer.Reset(sleepDuration) + case <-t.done: + return + } + } +} + +// Close starts shutting down the http2Server transport. +// TODO(zhaoq): Now the destruction is not blocked on any pending streams. This +// could cause some resource issue. Revisit this later. +func (t *http2Server) Close() error { + t.mu.Lock() + if t.state == closing { + t.mu.Unlock() + return errors.New("transport: Close() was already called") + } + t.state = closing + streams := t.activeStreams + t.activeStreams = nil + t.mu.Unlock() + t.controlBuf.finish() + close(t.done) + err := t.conn.Close() + if channelz.IsOn() { + channelz.RemoveEntry(t.channelzID) + } + // Cancel all active streams. + for _, s := range streams { + s.cancel() + } + if t.stats != nil { + connEnd := &stats.ConnEnd{} + t.stats.HandleConn(t.ctx, connEnd) + } + return err +} + +// deleteStream deletes the stream s from transport's active streams. +func (t *http2Server) deleteStream(s *Stream, eosReceived bool) { + // In case stream sending and receiving are invoked in separate + // goroutines (e.g., bi-directional streaming), cancel needs to be + // called to interrupt the potential blocking on other goroutines. + s.cancel() + + t.mu.Lock() + if _, ok := t.activeStreams[s.id]; ok { + delete(t.activeStreams, s.id) + if len(t.activeStreams) == 0 { + t.idle = time.Now() + } + } + t.mu.Unlock() + + if channelz.IsOn() { + if eosReceived { + atomic.AddInt64(&t.czData.streamsSucceeded, 1) + } else { + atomic.AddInt64(&t.czData.streamsFailed, 1) + } + } +} + +// finishStream closes the stream and puts the trailing headerFrame into controlbuf. +func (t *http2Server) finishStream(s *Stream, rst bool, rstCode http2.ErrCode, hdr *headerFrame, eosReceived bool) { + oldState := s.swapState(streamDone) + if oldState == streamDone { + // If the stream was already done, return. + return + } + + hdr.cleanup = &cleanupStream{ + streamID: s.id, + rst: rst, + rstCode: rstCode, + onWrite: func() { + t.deleteStream(s, eosReceived) + }, + } + t.controlBuf.put(hdr) +} + +// closeStream clears the footprint of a stream when the stream is not needed any more. +func (t *http2Server) closeStream(s *Stream, rst bool, rstCode http2.ErrCode, eosReceived bool) { + s.swapState(streamDone) + t.deleteStream(s, eosReceived) + + t.controlBuf.put(&cleanupStream{ + streamID: s.id, + rst: rst, + rstCode: rstCode, + onWrite: func() {}, + }) +} + +func (t *http2Server) RemoteAddr() net.Addr { + return t.remoteAddr +} + +func (t *http2Server) Drain() { + t.drain(http2.ErrCodeNo, []byte{}) +} + +func (t *http2Server) drain(code http2.ErrCode, debugData []byte) { + t.mu.Lock() + defer t.mu.Unlock() + if t.drainChan != nil { + return + } + t.drainChan = make(chan struct{}) + t.controlBuf.put(&goAway{code: code, debugData: debugData, headsUp: true}) +} + +var goAwayPing = &ping{data: [8]byte{1, 6, 1, 8, 0, 3, 3, 9}} + +// Handles outgoing GoAway and returns true if loopy needs to put itself +// in draining mode. +func (t *http2Server) outgoingGoAwayHandler(g *goAway) (bool, error) { + t.mu.Lock() + if t.state == closing { // TODO(mmukhi): This seems unnecessary. + t.mu.Unlock() + // The transport is closing. + return false, ErrConnClosing + } + sid := t.maxStreamID + if !g.headsUp { + // Stop accepting more streams now. + t.state = draining + if len(t.activeStreams) == 0 { + g.closeConn = true + } + t.mu.Unlock() + if err := t.framer.fr.WriteGoAway(sid, g.code, g.debugData); err != nil { + return false, err + } + if g.closeConn { + // Abruptly close the connection following the GoAway (via + // loopywriter). But flush out what's inside the buffer first. + t.framer.writer.Flush() + return false, fmt.Errorf("transport: Connection closing") + } + return true, nil + } + t.mu.Unlock() + // For a graceful close, send out a GoAway with stream ID of MaxUInt32, + // Follow that with a ping and wait for the ack to come back or a timer + // to expire. During this time accept new streams since they might have + // originated before the GoAway reaches the client. + // After getting the ack or timer expiration send out another GoAway this + // time with an ID of the max stream server intends to process. + if err := t.framer.fr.WriteGoAway(math.MaxUint32, http2.ErrCodeNo, []byte{}); err != nil { + return false, err + } + if err := t.framer.fr.WritePing(false, goAwayPing.data); err != nil { + return false, err + } + go func() { + timer := time.NewTimer(time.Minute) + defer timer.Stop() + select { + case <-t.drainChan: + case <-timer.C: + case <-t.done: + return + } + t.controlBuf.put(&goAway{code: g.code, debugData: g.debugData}) + }() + return false, nil +} + +func (t *http2Server) ChannelzMetric() *channelz.SocketInternalMetric { + s := channelz.SocketInternalMetric{ + StreamsStarted: atomic.LoadInt64(&t.czData.streamsStarted), + StreamsSucceeded: atomic.LoadInt64(&t.czData.streamsSucceeded), + StreamsFailed: atomic.LoadInt64(&t.czData.streamsFailed), + MessagesSent: atomic.LoadInt64(&t.czData.msgSent), + MessagesReceived: atomic.LoadInt64(&t.czData.msgRecv), + KeepAlivesSent: atomic.LoadInt64(&t.czData.kpCount), + LastRemoteStreamCreatedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastStreamCreatedTime)), + LastMessageSentTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgSentTime)), + LastMessageReceivedTimestamp: time.Unix(0, atomic.LoadInt64(&t.czData.lastMsgRecvTime)), + LocalFlowControlWindow: int64(t.fc.getSize()), + SocketOptions: channelz.GetSocketOption(t.conn), + LocalAddr: t.localAddr, + RemoteAddr: t.remoteAddr, + // RemoteName : + } + if au, ok := t.authInfo.(credentials.ChannelzSecurityInfo); ok { + s.Security = au.GetSecurityValue() + } + s.RemoteFlowControlWindow = t.getOutFlowWindow() + return &s +} + +func (t *http2Server) IncrMsgSent() { + atomic.AddInt64(&t.czData.msgSent, 1) + atomic.StoreInt64(&t.czData.lastMsgSentTime, time.Now().UnixNano()) +} + +func (t *http2Server) IncrMsgRecv() { + atomic.AddInt64(&t.czData.msgRecv, 1) + atomic.StoreInt64(&t.czData.lastMsgRecvTime, time.Now().UnixNano()) +} + +func (t *http2Server) getOutFlowWindow() int64 { + resp := make(chan uint32, 1) + timer := time.NewTimer(time.Second) + defer timer.Stop() + t.controlBuf.put(&outFlowControlSizeRequest{resp}) + select { + case sz := <-resp: + return int64(sz) + case <-t.done: + return -1 + case <-timer.C: + return -2 + } +} + +func getJitter(v time.Duration) time.Duration { + if v == infinity { + return 0 + } + // Generate a jitter between +/- 10% of the value. + r := int64(v / 10) + j := grpcrand.Int63n(2*r) - r + return time.Duration(j) +} diff --git a/vendor/google.golang.org/grpc/internal/transport/http_util.go b/vendor/google.golang.org/grpc/internal/transport/http_util.go new file mode 100644 index 000000000..4d15afbf7 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/http_util.go @@ -0,0 +1,600 @@ +/* + * + * Copyright 2014 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package transport + +import ( + "bufio" + "bytes" + "encoding/base64" + "fmt" + "io" + "math" + "net" + "net/http" + "strconv" + "strings" + "time" + "unicode/utf8" + + "github.com/golang/protobuf/proto" + "golang.org/x/net/http2" + "golang.org/x/net/http2/hpack" + spb "google.golang.org/genproto/googleapis/rpc/status" + "google.golang.org/grpc/codes" + "google.golang.org/grpc/grpclog" + "google.golang.org/grpc/internal/grpcutil" + "google.golang.org/grpc/status" +) + +const ( + // http2MaxFrameLen specifies the max length of a HTTP2 frame. + http2MaxFrameLen = 16384 // 16KB frame + // http://http2.github.io/http2-spec/#SettingValues + http2InitHeaderTableSize = 4096 + // baseContentType is the base content-type for gRPC. This is a valid + // content-type on it's own, but can also include a content-subtype such as + // "proto" as a suffix after "+" or ";". See + // https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests + // for more details. + +) + +var ( + clientPreface = []byte(http2.ClientPreface) + http2ErrConvTab = map[http2.ErrCode]codes.Code{ + http2.ErrCodeNo: codes.Internal, + http2.ErrCodeProtocol: codes.Internal, + http2.ErrCodeInternal: codes.Internal, + http2.ErrCodeFlowControl: codes.ResourceExhausted, + http2.ErrCodeSettingsTimeout: codes.Internal, + http2.ErrCodeStreamClosed: codes.Internal, + http2.ErrCodeFrameSize: codes.Internal, + http2.ErrCodeRefusedStream: codes.Unavailable, + http2.ErrCodeCancel: codes.Canceled, + http2.ErrCodeCompression: codes.Internal, + http2.ErrCodeConnect: codes.Internal, + http2.ErrCodeEnhanceYourCalm: codes.ResourceExhausted, + http2.ErrCodeInadequateSecurity: codes.PermissionDenied, + http2.ErrCodeHTTP11Required: codes.Internal, + } + // HTTPStatusConvTab is the HTTP status code to gRPC error code conversion table. + HTTPStatusConvTab = map[int]codes.Code{ + // 400 Bad Request - INTERNAL. + http.StatusBadRequest: codes.Internal, + // 401 Unauthorized - UNAUTHENTICATED. + http.StatusUnauthorized: codes.Unauthenticated, + // 403 Forbidden - PERMISSION_DENIED. + http.StatusForbidden: codes.PermissionDenied, + // 404 Not Found - UNIMPLEMENTED. + http.StatusNotFound: codes.Unimplemented, + // 429 Too Many Requests - UNAVAILABLE. + http.StatusTooManyRequests: codes.Unavailable, + // 502 Bad Gateway - UNAVAILABLE. + http.StatusBadGateway: codes.Unavailable, + // 503 Service Unavailable - UNAVAILABLE. + http.StatusServiceUnavailable: codes.Unavailable, + // 504 Gateway timeout - UNAVAILABLE. + http.StatusGatewayTimeout: codes.Unavailable, + } + logger = grpclog.Component("transport") +) + +type parsedHeaderData struct { + encoding string + // statusGen caches the stream status received from the trailer the server + // sent. Client side only. Do not access directly. After all trailers are + // parsed, use the status method to retrieve the status. + statusGen *status.Status + // rawStatusCode and rawStatusMsg are set from the raw trailer fields and are not + // intended for direct access outside of parsing. + rawStatusCode *int + rawStatusMsg string + httpStatus *int + // Server side only fields. + timeoutSet bool + timeout time.Duration + method string + // key-value metadata map from the peer. + mdata map[string][]string + statsTags []byte + statsTrace []byte + contentSubtype string + + // isGRPC field indicates whether the peer is speaking gRPC (otherwise HTTP). + // + // We are in gRPC mode (peer speaking gRPC) if: + // * We are client side and have already received a HEADER frame that indicates gRPC peer. + // * The header contains valid a content-type, i.e. a string starts with "application/grpc" + // And we should handle error specific to gRPC. + // + // Otherwise (i.e. a content-type string starts without "application/grpc", or does not exist), we + // are in HTTP fallback mode, and should handle error specific to HTTP. + isGRPC bool + grpcErr error + httpErr error + contentTypeErr string +} + +// decodeState configures decoding criteria and records the decoded data. +type decodeState struct { + // whether decoding on server side or not + serverSide bool + + // Records the states during HPACK decoding. It will be filled with info parsed from HTTP HEADERS + // frame once decodeHeader function has been invoked and returned. + data parsedHeaderData +} + +// isReservedHeader checks whether hdr belongs to HTTP2 headers +// reserved by gRPC protocol. Any other headers are classified as the +// user-specified metadata. +func isReservedHeader(hdr string) bool { + if hdr != "" && hdr[0] == ':' { + return true + } + switch hdr { + case "content-type", + "user-agent", + "grpc-message-type", + "grpc-encoding", + "grpc-message", + "grpc-status", + "grpc-timeout", + "grpc-status-details-bin", + // Intentionally exclude grpc-previous-rpc-attempts and + // grpc-retry-pushback-ms, which are "reserved", but their API + // intentionally works via metadata. + "te": + return true + default: + return false + } +} + +// isWhitelistedHeader checks whether hdr should be propagated into metadata +// visible to users, even though it is classified as "reserved", above. +func isWhitelistedHeader(hdr string) bool { + switch hdr { + case ":authority", "user-agent": + return true + default: + return false + } +} + +func (d *decodeState) status() *status.Status { + if d.data.statusGen == nil { + // No status-details were provided; generate status using code/msg. + d.data.statusGen = status.New(codes.Code(int32(*(d.data.rawStatusCode))), d.data.rawStatusMsg) + } + return d.data.statusGen +} + +const binHdrSuffix = "-bin" + +func encodeBinHeader(v []byte) string { + return base64.RawStdEncoding.EncodeToString(v) +} + +func decodeBinHeader(v string) ([]byte, error) { + if len(v)%4 == 0 { + // Input was padded, or padding was not necessary. + return base64.StdEncoding.DecodeString(v) + } + return base64.RawStdEncoding.DecodeString(v) +} + +func encodeMetadataHeader(k, v string) string { + if strings.HasSuffix(k, binHdrSuffix) { + return encodeBinHeader(([]byte)(v)) + } + return v +} + +func decodeMetadataHeader(k, v string) (string, error) { + if strings.HasSuffix(k, binHdrSuffix) { + b, err := decodeBinHeader(v) + return string(b), err + } + return v, nil +} + +func (d *decodeState) decodeHeader(frame *http2.MetaHeadersFrame) (http2.ErrCode, error) { + // frame.Truncated is set to true when framer detects that the current header + // list size hits MaxHeaderListSize limit. + if frame.Truncated { + return http2.ErrCodeFrameSize, status.Error(codes.Internal, "peer header list size exceeded limit") + } + + for _, hf := range frame.Fields { + d.processHeaderField(hf) + } + + if d.data.isGRPC { + if d.data.grpcErr != nil { + return http2.ErrCodeProtocol, d.data.grpcErr + } + if d.serverSide { + return http2.ErrCodeNo, nil + } + if d.data.rawStatusCode == nil && d.data.statusGen == nil { + // gRPC status doesn't exist. + // Set rawStatusCode to be unknown and return nil error. + // So that, if the stream has ended this Unknown status + // will be propagated to the user. + // Otherwise, it will be ignored. In which case, status from + // a later trailer, that has StreamEnded flag set, is propagated. + code := int(codes.Unknown) + d.data.rawStatusCode = &code + } + return http2.ErrCodeNo, nil + } + + // HTTP fallback mode + if d.data.httpErr != nil { + return http2.ErrCodeProtocol, d.data.httpErr + } + + var ( + code = codes.Internal // when header does not include HTTP status, return INTERNAL + ok bool + ) + + if d.data.httpStatus != nil { + code, ok = HTTPStatusConvTab[*(d.data.httpStatus)] + if !ok { + code = codes.Unknown + } + } + + return http2.ErrCodeProtocol, status.Error(code, d.constructHTTPErrMsg()) +} + +// constructErrMsg constructs error message to be returned in HTTP fallback mode. +// Format: HTTP status code and its corresponding message + content-type error message. +func (d *decodeState) constructHTTPErrMsg() string { + var errMsgs []string + + if d.data.httpStatus == nil { + errMsgs = append(errMsgs, "malformed header: missing HTTP status") + } else { + errMsgs = append(errMsgs, fmt.Sprintf("%s: HTTP status code %d", http.StatusText(*(d.data.httpStatus)), *d.data.httpStatus)) + } + + if d.data.contentTypeErr == "" { + errMsgs = append(errMsgs, "transport: missing content-type field") + } else { + errMsgs = append(errMsgs, d.data.contentTypeErr) + } + + return strings.Join(errMsgs, "; ") +} + +func (d *decodeState) addMetadata(k, v string) { + if d.data.mdata == nil { + d.data.mdata = make(map[string][]string) + } + d.data.mdata[k] = append(d.data.mdata[k], v) +} + +func (d *decodeState) processHeaderField(f hpack.HeaderField) { + switch f.Name { + case "content-type": + contentSubtype, validContentType := grpcutil.ContentSubtype(f.Value) + if !validContentType { + d.data.contentTypeErr = fmt.Sprintf("transport: received the unexpected content-type %q", f.Value) + return + } + d.data.contentSubtype = contentSubtype + // TODO: do we want to propagate the whole content-type in the metadata, + // or come up with a way to just propagate the content-subtype if it was set? + // ie {"content-type": "application/grpc+proto"} or {"content-subtype": "proto"} + // in the metadata? + d.addMetadata(f.Name, f.Value) + d.data.isGRPC = true + case "grpc-encoding": + d.data.encoding = f.Value + case "grpc-status": + code, err := strconv.Atoi(f.Value) + if err != nil { + d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-status: %v", err) + return + } + d.data.rawStatusCode = &code + case "grpc-message": + d.data.rawStatusMsg = decodeGrpcMessage(f.Value) + case "grpc-status-details-bin": + v, err := decodeBinHeader(f.Value) + if err != nil { + d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-status-details-bin: %v", err) + return + } + s := &spb.Status{} + if err := proto.Unmarshal(v, s); err != nil { + d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-status-details-bin: %v", err) + return + } + d.data.statusGen = status.FromProto(s) + case "grpc-timeout": + d.data.timeoutSet = true + var err error + if d.data.timeout, err = decodeTimeout(f.Value); err != nil { + d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed time-out: %v", err) + } + case ":path": + d.data.method = f.Value + case ":status": + code, err := strconv.Atoi(f.Value) + if err != nil { + d.data.httpErr = status.Errorf(codes.Internal, "transport: malformed http-status: %v", err) + return + } + d.data.httpStatus = &code + case "grpc-tags-bin": + v, err := decodeBinHeader(f.Value) + if err != nil { + d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-tags-bin: %v", err) + return + } + d.data.statsTags = v + d.addMetadata(f.Name, string(v)) + case "grpc-trace-bin": + v, err := decodeBinHeader(f.Value) + if err != nil { + d.data.grpcErr = status.Errorf(codes.Internal, "transport: malformed grpc-trace-bin: %v", err) + return + } + d.data.statsTrace = v + d.addMetadata(f.Name, string(v)) + default: + if isReservedHeader(f.Name) && !isWhitelistedHeader(f.Name) { + break + } + v, err := decodeMetadataHeader(f.Name, f.Value) + if err != nil { + if logger.V(logLevel) { + logger.Errorf("Failed to decode metadata header (%q, %q): %v", f.Name, f.Value, err) + } + return + } + d.addMetadata(f.Name, v) + } +} + +type timeoutUnit uint8 + +const ( + hour timeoutUnit = 'H' + minute timeoutUnit = 'M' + second timeoutUnit = 'S' + millisecond timeoutUnit = 'm' + microsecond timeoutUnit = 'u' + nanosecond timeoutUnit = 'n' +) + +func timeoutUnitToDuration(u timeoutUnit) (d time.Duration, ok bool) { + switch u { + case hour: + return time.Hour, true + case minute: + return time.Minute, true + case second: + return time.Second, true + case millisecond: + return time.Millisecond, true + case microsecond: + return time.Microsecond, true + case nanosecond: + return time.Nanosecond, true + default: + } + return +} + +func decodeTimeout(s string) (time.Duration, error) { + size := len(s) + if size < 2 { + return 0, fmt.Errorf("transport: timeout string is too short: %q", s) + } + if size > 9 { + // Spec allows for 8 digits plus the unit. + return 0, fmt.Errorf("transport: timeout string is too long: %q", s) + } + unit := timeoutUnit(s[size-1]) + d, ok := timeoutUnitToDuration(unit) + if !ok { + return 0, fmt.Errorf("transport: timeout unit is not recognized: %q", s) + } + t, err := strconv.ParseInt(s[:size-1], 10, 64) + if err != nil { + return 0, err + } + const maxHours = math.MaxInt64 / int64(time.Hour) + if d == time.Hour && t > maxHours { + // This timeout would overflow math.MaxInt64; clamp it. + return time.Duration(math.MaxInt64), nil + } + return d * time.Duration(t), nil +} + +const ( + spaceByte = ' ' + tildeByte = '~' + percentByte = '%' +) + +// encodeGrpcMessage is used to encode status code in header field +// "grpc-message". It does percent encoding and also replaces invalid utf-8 +// characters with Unicode replacement character. +// +// It checks to see if each individual byte in msg is an allowable byte, and +// then either percent encoding or passing it through. When percent encoding, +// the byte is converted into hexadecimal notation with a '%' prepended. +func encodeGrpcMessage(msg string) string { + if msg == "" { + return "" + } + lenMsg := len(msg) + for i := 0; i < lenMsg; i++ { + c := msg[i] + if !(c >= spaceByte && c <= tildeByte && c != percentByte) { + return encodeGrpcMessageUnchecked(msg) + } + } + return msg +} + +func encodeGrpcMessageUnchecked(msg string) string { + var buf bytes.Buffer + for len(msg) > 0 { + r, size := utf8.DecodeRuneInString(msg) + for _, b := range []byte(string(r)) { + if size > 1 { + // If size > 1, r is not ascii. Always do percent encoding. + buf.WriteString(fmt.Sprintf("%%%02X", b)) + continue + } + + // The for loop is necessary even if size == 1. r could be + // utf8.RuneError. + // + // fmt.Sprintf("%%%02X", utf8.RuneError) gives "%FFFD". + if b >= spaceByte && b <= tildeByte && b != percentByte { + buf.WriteByte(b) + } else { + buf.WriteString(fmt.Sprintf("%%%02X", b)) + } + } + msg = msg[size:] + } + return buf.String() +} + +// decodeGrpcMessage decodes the msg encoded by encodeGrpcMessage. +func decodeGrpcMessage(msg string) string { + if msg == "" { + return "" + } + lenMsg := len(msg) + for i := 0; i < lenMsg; i++ { + if msg[i] == percentByte && i+2 < lenMsg { + return decodeGrpcMessageUnchecked(msg) + } + } + return msg +} + +func decodeGrpcMessageUnchecked(msg string) string { + var buf bytes.Buffer + lenMsg := len(msg) + for i := 0; i < lenMsg; i++ { + c := msg[i] + if c == percentByte && i+2 < lenMsg { + parsed, err := strconv.ParseUint(msg[i+1:i+3], 16, 8) + if err != nil { + buf.WriteByte(c) + } else { + buf.WriteByte(byte(parsed)) + i += 2 + } + } else { + buf.WriteByte(c) + } + } + return buf.String() +} + +type bufWriter struct { + buf []byte + offset int + batchSize int + conn net.Conn + err error + + onFlush func() +} + +func newBufWriter(conn net.Conn, batchSize int) *bufWriter { + return &bufWriter{ + buf: make([]byte, batchSize*2), + batchSize: batchSize, + conn: conn, + } +} + +func (w *bufWriter) Write(b []byte) (n int, err error) { + if w.err != nil { + return 0, w.err + } + if w.batchSize == 0 { // Buffer has been disabled. + return w.conn.Write(b) + } + for len(b) > 0 { + nn := copy(w.buf[w.offset:], b) + b = b[nn:] + w.offset += nn + n += nn + if w.offset >= w.batchSize { + err = w.Flush() + } + } + return n, err +} + +func (w *bufWriter) Flush() error { + if w.err != nil { + return w.err + } + if w.offset == 0 { + return nil + } + if w.onFlush != nil { + w.onFlush() + } + _, w.err = w.conn.Write(w.buf[:w.offset]) + w.offset = 0 + return w.err +} + +type framer struct { + writer *bufWriter + fr *http2.Framer +} + +func newFramer(conn net.Conn, writeBufferSize, readBufferSize int, maxHeaderListSize uint32) *framer { + if writeBufferSize < 0 { + writeBufferSize = 0 + } + var r io.Reader = conn + if readBufferSize > 0 { + r = bufio.NewReaderSize(r, readBufferSize) + } + w := newBufWriter(conn, writeBufferSize) + f := &framer{ + writer: w, + fr: http2.NewFramer(w, r), + } + f.fr.SetMaxReadFrameSize(http2MaxFrameLen) + // Opt-in to Frame reuse API on framer to reduce garbage. + // Frames aren't safe to read from after a subsequent call to ReadFrame. + f.fr.SetReuseFrames() + f.fr.MaxHeaderListSize = maxHeaderListSize + f.fr.ReadMetaHeaders = hpack.NewDecoder(http2InitHeaderTableSize, nil) + return f +} diff --git a/vendor/google.golang.org/grpc/internal/transport/transport.go b/vendor/google.golang.org/grpc/internal/transport/transport.go new file mode 100644 index 000000000..b74030a96 --- /dev/null +++ b/vendor/google.golang.org/grpc/internal/transport/transport.go @@ -0,0 +1,804 @@ +/* + * + * Copyright 2014 gRPC authors. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +// Package transport defines and implements message oriented communication +// channel to complete various transactions (e.g., an RPC). It is meant for +// grpc-internal usage and is not intended to be imported directly by users. +package transport + +import ( + "bytes" + "context" + "errors" + "fmt" + "io" + "net" + "sync" + "sync/atomic" + + "google.golang.org/grpc/codes" + "google.golang.org/grpc/credentials" + "google.golang.org/grpc/keepalive" + "google.golang.org/grpc/metadata" + "google.golang.org/grpc/resolver" + "google.golang.org/grpc/stats" + "google.golang.org/grpc/status" + "google.golang.org/grpc/tap" +) + +const logLevel = 2 + +type bufferPool struct { + pool sync.Pool +} + +func newBufferPool() *bufferPool { + return &bufferPool{ + pool: sync.Pool{ + New: func() interface{} { + return new(bytes.Buffer) + }, + }, + } +} + +func (p *bufferPool) get() *bytes.Buffer { + return p.pool.Get().(*bytes.Buffer) +} + +func (p *bufferPool) put(b *bytes.Buffer) { + p.pool.Put(b) +} + +// recvMsg represents the received msg from the transport. All transport +// protocol specific info has been removed. +type recvMsg struct { + buffer *bytes.Buffer + // nil: received some data + // io.EOF: stream is completed. data is nil. + // other non-nil error: transport failure. data is nil. + err error +} + +// recvBuffer is an unbounded channel of recvMsg structs. +// +// Note: recvBuffer differs from buffer.Unbounded only in the fact that it +// holds a channel of recvMsg structs instead of objects implementing "item" +// interface. recvBuffer is written to much more often and using strict recvMsg +// structs helps avoid allocation in "recvBuffer.put" +type recvBuffer struct { + c chan recvMsg + mu sync.Mutex + backlog []recvMsg + err error +} + +func newRecvBuffer() *recvBuffer { + b := &recvBuffer{ + c: make(chan recvMsg, 1), + } + return b +} + +func (b *recvBuffer) put(r recvMsg) { + b.mu.Lock() + if b.err != nil { + b.mu.Unlock() + // An error had occurred earlier, don't accept more + // data or errors. + return + } + b.err = r.err + if len(b.backlog) == 0 { + select { + case b.c <- r: + b.mu.Unlock() + return + default: + } + } + b.backlog = append(b.backlog, r) + b.mu.Unlock() +} + +func (b *recvBuffer) load() { + b.mu.Lock() + if len(b.backlog) > 0 { + select { + case b.c <- b.backlog[0]: + b.backlog[0] = recvMsg{} + b.backlog = b.backlog[1:] + default: + } + } + b.mu.Unlock() +} + +// get returns the channel that receives a recvMsg in the buffer. +// +// Upon receipt of a recvMsg, the caller should call load to send another +// recvMsg onto the channel if there is any. +func (b *recvBuffer) get() <-chan recvMsg { + return b.c +} + +// recvBufferReader implements io.Reader interface to read the data from +// recvBuffer. +type recvBufferReader struct { + closeStream func(error) // Closes the client transport stream with the given error and nil trailer metadata. + ctx context.Context + ctxDone <-chan struct{} // cache of ctx.Done() (for performance). + recv *recvBuffer + last *bytes.Buffer // Stores the remaining data in the previous calls. + err error + freeBuffer func(*bytes.Buffer) +} + +// Read reads the next len(p) bytes from last. If last is drained, it tries to +// read additional data from recv. It blocks if there no additional data available +// in recv. If Read returns any non-nil error, it will continue to return that error. +func (r *recvBufferReader) Read(p []byte) (n int, err error) { + if r.err != nil { + return 0, r.err + } + if r.last != nil { + // Read remaining data left in last call. + copied, _ := r.last.Read(p) + if r.last.Len() == 0 { + r.freeBuffer(r.last) + r.last = nil + } + return copied, nil + } + if r.closeStream != nil { + n, r.err = r.readClient(p) + } else { + n, r.err = r.read(p) + } + return n, r.err +} + +func (r *recvBufferReader) read(p []byte) (n int, err error) { + select { + case <-r.ctxDone: + return 0, ContextErr(r.ctx.Err()) + case m := <-r.recv.get(): + return r.readAdditional(m, p) + } +} + +func (r *recvBufferReader) readClient(p []byte) (n int, err error) { + // If the context is canceled, then closes the stream with nil metadata. + // closeStream writes its error parameter to r.recv as a recvMsg. + // r.readAdditional acts on that message and returns the necessary error. + select { + case <-r.ctxDone: + // Note that this adds the ctx error to the end of recv buffer, and + // reads from the head. This will delay the error until recv buffer is + // empty, thus will delay ctx cancellation in Recv(). + // + // It's done this way to fix a race between ctx cancel and trailer. The + // race was, stream.Recv() may return ctx error if ctxDone wins the + // race, but stream.Trailer() may return a non-nil md because the stream + // was not marked as done when trailer is received. This closeStream + // call will mark stream as done, thus fix the race. + // + // TODO: delaying ctx error seems like a unnecessary side effect. What + // we really want is to mark the stream as done, and return ctx error + // faster. + r.closeStream(ContextErr(r.ctx.Err())) + m := <-r.recv.get() + return r.readAdditional(m, p) + case m := <-r.recv.get(): + return r.readAdditional(m, p) + } +} + +func (r *recvBufferReader) readAdditional(m recvMsg, p []byte) (n int, err error) { + r.recv.load() + if m.err != nil { + return 0, m.err + } + copied, _ := m.buffer.Read(p) + if m.buffer.Len() == 0 { + r.freeBuffer(m.buffer) + r.last = nil + } else { + r.last = m.buffer + } + return copied, nil +} + +type streamState uint32 + +const ( + streamActive streamState = iota + streamWriteDone // EndStream sent + streamReadDone // EndStream received + streamDone // the entire stream is finished. +) + +// Stream represents an RPC in the transport layer. +type Stream struct { + id uint32 + st ServerTransport // nil for client side Stream + ct *http2Client // nil for server side Stream + ctx context.Context // the associated context of the stream + cancel context.CancelFunc // always nil for client side Stream + done chan struct{} // closed at the end of stream to unblock writers. On the client side. + ctxDone <-chan struct{} // same as done chan but for server side. Cache of ctx.Done() (for performance) + method string // the associated RPC method of the stream + recvCompress string + sendCompress string + buf *recvBuffer + trReader io.Reader + fc *inFlow + wq *writeQuota + + // Callback to state application's intentions to read data. This + // is used to adjust flow control, if needed. + requestRead func(int) + + headerChan chan struct{} // closed to indicate the end of header metadata. + headerChanClosed uint32 // set when headerChan is closed. Used to avoid closing headerChan multiple times. + // headerValid indicates whether a valid header was received. Only + // meaningful after headerChan is closed (always call waitOnHeader() before + // reading its value). Not valid on server side. + headerValid bool + + // hdrMu protects header and trailer metadata on the server-side. + hdrMu sync.Mutex + // On client side, header keeps the received header metadata. + // + // On server side, header keeps the header set by SetHeader(). The complete + // header will merged into this after t.WriteHeader() is called. + header metadata.MD + trailer metadata.MD // the key-value map of trailer metadata. + + noHeaders bool // set if the client never received headers (set only after the stream is done). + + // On the server-side, headerSent is atomically set to 1 when the headers are sent out. + headerSent uint32 + + state streamState + + // On client-side it is the status error received from the server. + // On server-side it is unused. + status *status.Status + + bytesReceived uint32 // indicates whether any bytes have been received on this stream + unprocessed uint32 // set if the server sends a refused stream or GOAWAY including this stream + + // contentSubtype is the content-subtype for requests. + // this must be lowercase or the behavior is undefined. + contentSubtype string +} + +// isHeaderSent is only valid on the server-side. +func (s *Stream) isHeaderSent() bool { + return atomic.LoadUint32(&s.headerSent) == 1 +} + +// updateHeaderSent updates headerSent and returns true +// if it was alreay set. It is valid only on server-side. +func (s *Stream) updateHeaderSent() bool { + return atomic.SwapUint32(&s.headerSent, 1) == 1 +} + +func (s *Stream) swapState(st streamState) streamState { + return streamState(atomic.SwapUint32((*uint32)(&s.state), uint32(st))) +} + +func (s *Stream) compareAndSwapState(oldState, newState streamState) bool { + return atomic.CompareAndSwapUint32((*uint32)(&s.state), uint32(oldState), uint32(newState)) +} + +func (s *Stream) getState() streamState { + return streamState(atomic.LoadUint32((*uint32)(&s.state))) +} + +func (s *Stream) waitOnHeader() { + if s.headerChan == nil { + // On the server headerChan is always nil since a stream originates + // only after having received headers. + return + } + select { + case <-s.ctx.Done(): + // Close the stream to prevent headers/trailers from changing after + // this function returns. + s.ct.CloseStream(s, ContextErr(s.ctx.Err())) + // headerChan could possibly not be closed yet if closeStream raced + // with operateHeaders; wait until it is closed explicitly here. + <-s.headerChan + case <-s.headerChan: + } +} + +// RecvCompress returns the compression algorithm applied to the inbound +// message. It is empty string if there is no compression applied. +func (s *Stream) RecvCompress() string { + s.waitOnHeader() + return s.recvCompress +} + +// SetSendCompress sets the compression algorithm to the stream. +func (s *Stream) SetSendCompress(str string) { + s.sendCompress = str +} + +// Done returns a channel which is closed when it receives the final status +// from the server. +func (s *Stream) Done() <-chan struct{} { + return s.done +} + +// Header returns the header metadata of the stream. +// +// On client side, it acquires the key-value pairs of header metadata once it is +// available. It blocks until i) the metadata is ready or ii) there is no header +// metadata or iii) the stream is canceled/expired. +// +// On server side, it returns the out header after t.WriteHeader is called. It +// does not block and must not be called until after WriteHeader. +func (s *Stream) Header() (metadata.MD, error) { + if s.headerChan == nil { + // On server side, return the header in stream. It will be the out + // header after t.WriteHeader is called. + return s.header.Copy(), nil + } + s.waitOnHeader() + if !s.headerValid { + return nil, s.status.Err() + } + return s.header.Copy(), nil +} + +// TrailersOnly blocks until a header or trailers-only frame is received and +// then returns true if the stream was trailers-only. If the stream ends +// before headers are received, returns true, nil. Client-side only. +func (s *Stream) TrailersOnly() bool { + s.waitOnHeader() + return s.noHeaders +} + +// Trailer returns the cached trailer metedata. Note that if it is not called +// after the entire stream is done, it could return an empty MD. Client +// side only. +// It can be safely read only after stream has ended that is either read +// or write have returned io.EOF. +func (s *Stream) Trailer() metadata.MD { + c := s.trailer.Copy() + return c +} + +// ContentSubtype returns the content-subtype for a request. For example, a +// content-subtype of "proto" will result in a content-type of +// "application/grpc+proto". This will always be lowercase. See +// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for +// more details. +func (s *Stream) ContentSubtype() string { + return s.contentSubtype +} + +// Context returns the context of the stream. +func (s *Stream) Context() context.Context { + return s.ctx +} + +// Method returns the method for the stream. +func (s *Stream) Method() string { + return s.method +} + +// Status returns the status received from the server. +// Status can be read safely only after the stream has ended, +// that is, after Done() is closed. +func (s *Stream) Status() *status.Status { + return s.status +} + +// SetHeader sets the header metadata. This can be called multiple times. +// Server side only. +// This should not be called in parallel to other data writes. +func (s *Stream) SetHeader(md metadata.MD) error { + if md.Len() == 0 { + return nil + } + if s.isHeaderSent() || s.getState() == streamDone { + return ErrIllegalHeaderWrite + } + s.hdrMu.Lock() + s.header = metadata.Join(s.header, md) + s.hdrMu.Unlock() + return nil +} + +// SendHeader sends the given header metadata. The given metadata is +// combined with any metadata set by previous calls to SetHeader and +// then written to the transport stream. +func (s *Stream) SendHeader(md metadata.MD) error { + return s.st.WriteHeader(s, md) +} + +// SetTrailer sets the trailer metadata which will be sent with the RPC status +// by the server. This can be called multiple times. Server side only. +// This should not be called parallel to other data writes. +func (s *Stream) SetTrailer(md metadata.MD) error { + if md.Len() == 0 { + return nil + } + if s.getState() == streamDone { + return ErrIllegalHeaderWrite + } + s.hdrMu.Lock() + s.trailer = metadata.Join(s.trailer, md) + s.hdrMu.Unlock() + return nil +} + +func (s *Stream) write(m recvMsg) { + s.buf.put(m) +} + +// Read reads all p bytes from the wire for this stream. +func (s *Stream) Read(p []byte) (n int, err error) { + // Don't request a read if there was an error earlier + if er := s.trReader.(*transportReader).er; er != nil { + return 0, er + } + s.requestRead(len(p)) + return io.ReadFull(s.trReader, p) +} + +// tranportReader reads all the data available for this Stream from the transport and +// passes them into the decoder, which converts them into a gRPC message stream. +// The error is io.EOF when the stream is done or another non-nil error if +// the stream broke. +type transportReader struct { + reader io.Reader + // The handler to control the window update procedure for both this + // particular stream and the associated transport. + windowHandler func(int) + er error +} + +func (t *transportReader) Read(p []byte) (n int, err error) { + n, err = t.reader.Read(p) + if err != nil { + t.er = err + return + } + t.windowHandler(n) + return +} + +// BytesReceived indicates whether any bytes have been received on this stream. +func (s *Stream) BytesReceived() bool { + return atomic.LoadUint32(&s.bytesReceived) == 1 +} + +// Unprocessed indicates whether the server did not process this stream -- +// i.e. it sent a refused stream or GOAWAY including this stream ID. +func (s *Stream) Unprocessed() bool { + return atomic.LoadUint32(&s.unprocessed) == 1 +} + +// GoString is implemented by Stream so context.String() won't +// race when printing %#v. +func (s *Stream) GoString() string { + return fmt.Sprintf("<stream: %p, %v>", s, s.method) +} + +// state of transport +type transportState int + +const ( + reachable transportState = iota + closing + draining +) + +// ServerConfig consists of all the configurations to establish a server transport. +type ServerConfig struct { + MaxStreams uint32 + AuthInfo credentials.AuthInfo + InTapHandle tap.ServerInHandle + StatsHandler stats.Handler + KeepaliveParams keepalive.ServerParameters + KeepalivePolicy keepalive.EnforcementPolicy + InitialWindowSize int32 + InitialConnWindowSize int32 + WriteBufferSize int + ReadBufferSize int + ChannelzParentID int64 + MaxHeaderListSize *uint32 + HeaderTableSize *uint32 +} + +// NewServerTransport creates a ServerTransport with conn or non-nil error +// if it fails. +func NewServerTransport(protocol string, conn net.Conn, config *ServerConfig) (ServerTransport, error) { + return newHTTP2Server(conn, config) +} + +// ConnectOptions covers all relevant options for communicating with the server. +type ConnectOptions struct { + // UserAgent is the application user agent. + UserAgent string + // Dialer specifies how to dial a network address. + Dialer func(context.Context, string) (net.Conn, error) + // FailOnNonTempDialError specifies if gRPC fails on non-temporary dial errors. + FailOnNonTempDialError bool + // PerRPCCredentials stores the PerRPCCredentials required to issue RPCs. + PerRPCCredentials []credentials.PerRPCCredentials + // TransportCredentials stores the Authenticator required to setup a client + // connection. Only one of TransportCredentials and CredsBundle is non-nil. + TransportCredentials credentials.TransportCredentials + // CredsBundle is the credentials bundle to be used. Only one of + // TransportCredentials and CredsBundle is non-nil. + CredsBundle credentials.Bundle + // KeepaliveParams stores the keepalive parameters. + KeepaliveParams keepalive.ClientParameters + // StatsHandler stores the handler for stats. + StatsHandler stats.Handler + // InitialWindowSize sets the initial window size for a stream. + InitialWindowSize int32 + // InitialConnWindowSize sets the initial window size for a connection. + InitialConnWindowSize int32 + // WriteBufferSize sets the size of write buffer which in turn determines how much data can be batched before it's written on the wire. + WriteBufferSize int + // ReadBufferSize sets the size of read buffer, which in turn determines how much data can be read at most for one read syscall. + ReadBufferSize int + // ChannelzParentID sets the addrConn id which initiate the creation of this client transport. + ChannelzParentID int64 + // MaxHeaderListSize sets the max (uncompressed) size of header list that is prepared to be received. + MaxHeaderListSize *uint32 +} + +// NewClientTransport establishes the transport with the required ConnectOptions +// and returns it to the caller. +func NewClientTransport(connectCtx, ctx context.Context, addr resolver.Address, opts ConnectOptions, onPrefaceReceipt func(), onGoAway func(GoAwayReason), onClose func()) (ClientTransport, error) { + return newHTTP2Client(connectCtx, ctx, addr, opts, onPrefaceReceipt, onGoAway, onClose) +} + +// Options provides additional hints and information for message +// transmission. +type Options struct { + // Last indicates whether this write is the last piece for + // this stream. + Last bool +} + +// CallHdr carries the information of a particular RPC. +type CallHdr struct { + // Host specifies the peer's host. + Host string + + // Method specifies the operation to perform. + Method string + + // SendCompress specifies the compression algorithm applied on + // outbound message. + SendCompress string + + // Creds specifies credentials.PerRPCCredentials for a call. + Creds credentials.PerRPCCredentials + + // ContentSubtype specifies the content-subtype for a request. For example, a + // content-subtype of "proto" will result in a content-type of + // "application/grpc+proto". The value of ContentSubtype must be all + // lowercase, otherwise the behavior is undefined. See + // https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests + // for more details. + ContentSubtype string + + PreviousAttempts int // value of grpc-previous-rpc-attempts header to set +} + +// ClientTransport is the common interface for all gRPC client-side transport +// implementations. +type ClientTransport interface { + // Close tears down this transport. Once it returns, the transport + // should not be accessed any more. The caller must make sure this + // is called only once. + Close() error + + // GracefulClose starts to tear down the transport: the transport will stop + // accepting new RPCs and NewStream will return error. Once all streams are + // finished, the transport will close. + // + // It does not block. + GracefulClose() + + // Write sends the data for the given stream. A nil stream indicates + // the write is to be performed on the transport as a whole. + Write(s *Stream, hdr []byte, data []byte, opts *Options) error + + // NewStream creates a Stream for an RPC. + NewStream(ctx context.Context, callHdr *CallHdr) (*Stream, error) + + // CloseStream clears the footprint of a stream when the stream is + // not needed any more. The err indicates the error incurred when + // CloseStream is called. Must be called when a stream is finished + // unless the associated transport is closing. + CloseStream(stream *Stream, err error) + + // Error returns a channel that is closed when some I/O error + // happens. Typically the caller should have a goroutine to monitor + // this in order to take action (e.g., close the current transport + // and create a new one) in error case. It should not return nil + // once the transport is initiated. + Error() <-chan struct{} + + // GoAway returns a channel that is closed when ClientTransport + // receives the draining signal from the server (e.g., GOAWAY frame in + // HTTP/2). + GoAway() <-chan struct{} + + // GetGoAwayReason returns the reason why GoAway frame was received. + GetGoAwayReason() GoAwayReason + + // RemoteAddr returns the remote network address. + RemoteAddr() net.Addr + + // IncrMsgSent increments the number of message sent through this transport. + IncrMsgSent() + + // IncrMsgRecv increments the number of message received through this transport. + IncrMsgRecv() +} + +// ServerTransport is the common interface for all gRPC server-side transport +// implementations. +// +// Methods may be called concurrently from multiple goroutines, but +// Write methods for a given Stream will be called serially. +type ServerTransport interface { + // HandleStreams receives incoming streams using the given handler. + HandleStreams(func(*Stream), func(context.Context, string) context.Context) + + // WriteHeader sends the header metadata for the given stream. + // WriteHeader may not be called on all streams. + WriteHeader(s *Stream, md metadata.MD) error + + // Write sends the data for the given stream. + // Write may not be called on all streams. + Write(s *Stream, hdr []byte, data []byte, opts *Options) error + + // WriteStatus sends the status of a stream to the client. WriteStatus is + // the final call made on a stream and always occurs. + WriteStatus(s *Stream, st *status.Status) error + + // Close tears down the transport. Once it is called, the transport + // should not be accessed any more. All the pending streams and their + // handlers will be terminated asynchronously. + Close() error + + // RemoteAddr returns the remote network address. + RemoteAddr() net.Addr + + // Drain notifies the client this ServerTransport stops accepting new RPCs. + Drain() + + // IncrMsgSent increments the number of message sent through this transport. + IncrMsgSent() + + // IncrMsgRecv increments the number of message received through this transport. + IncrMsgRecv() +} + +// connectionErrorf creates an ConnectionError with the specified error description. +func connectionErrorf(temp bool, e error, format string, a ...interface{}) ConnectionError { + return ConnectionError{ + Desc: fmt.Sprintf(format, a...), + temp: temp, + err: e, + } +} + +// ConnectionError is an error that results in the termination of the +// entire connection and the retry of all the active streams. +type ConnectionError struct { + Desc string + temp bool + err error +} + +func (e ConnectionError) Error() string { + return fmt.Sprintf("connection error: desc = %q", e.Desc) +} + +// Temporary indicates if this connection error is temporary or fatal. +func (e ConnectionError) Temporary() bool { + return e.temp +} + +// Origin returns the original error of this connection error. +func (e ConnectionError) Origin() error { + // Never return nil error here. + // If the original error is nil, return itself. + if e.err == nil { + return e + } + return e.err +} + +var ( + // ErrConnClosing indicates that the transport is closing. + ErrConnClosing = connectionErrorf(true, nil, "transport is closing") + // errStreamDrain indicates that the stream is rejected because the + // connection is draining. This could be caused by goaway or balancer + // removing the address. + errStreamDrain = status.Error(codes.Unavailable, "the connection is draining") + // errStreamDone is returned from write at the client side to indiacte application + // layer of an error. + errStreamDone = errors.New("the stream is done") + // StatusGoAway indicates that the server sent a GOAWAY that included this + // stream's ID in unprocessed RPCs. + statusGoAway = status.New(codes.Unavailable, "the stream is rejected because server is draining the connection") +) + +// GoAwayReason contains the reason for the GoAway frame received. +type GoAwayReason uint8 + +const ( + // GoAwayInvalid indicates that no GoAway frame is received. + GoAwayInvalid GoAwayReason = 0 + // GoAwayNoReason is the default value when GoAway frame is received. + GoAwayNoReason GoAwayReason = 1 + // GoAwayTooManyPings indicates that a GoAway frame with + // ErrCodeEnhanceYourCalm was received and that the debug data said + // "too_many_pings". + GoAwayTooManyPings GoAwayReason = 2 +) + +// channelzData is used to store channelz related data for http2Client and http2Server. +// These fields cannot be embedded in the original structs (e.g. http2Client), since to do atomic +// operation on int64 variable on 32-bit machine, user is responsible to enforce memory alignment. +// Here, by grouping those int64 fields inside a struct, we are enforcing the alignment. +type channelzData struct { + kpCount int64 + // The number of streams that have started, including already finished ones. + streamsStarted int64 + // Client side: The number of streams that have ended successfully by receiving + // EoS bit set frame from server. + // Server side: The number of streams that have ended successfully by sending + // frame with EoS bit set. + streamsSucceeded int64 + streamsFailed int64 + // lastStreamCreatedTime stores the timestamp that the last stream gets created. It is of int64 type + // instead of time.Time since it's more costly to atomically update time.Time variable than int64 + // variable. The same goes for lastMsgSentTime and lastMsgRecvTime. + lastStreamCreatedTime int64 + msgSent int64 + msgRecv int64 + lastMsgSentTime int64 + lastMsgRecvTime int64 +} + +// ContextErr converts the error from context package into a status error. +func ContextErr(err error) error { + switch err { + case context.DeadlineExceeded: + return status.Error(codes.DeadlineExceeded, err.Error()) + case context.Canceled: + return status.Error(codes.Canceled, err.Error()) + } + return status.Errorf(codes.Internal, "Unexpected error from context packet: %v", err) +} |