summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAge
* Remove urfave/cli from libpodbaude2019-02-11
| | | | | | | This is the final cleanup to remove urfave/sli from libpod. Removed old, disabled tests that have not been run in over a year. Signed-off-by: baude <bbaude@redhat.com>
* Migrate to cobra CLIbaude2019-02-08
| | | | | | | | We intend to migrate to the cobra cli from urfave/cli because the project is more well maintained. There are also some technical reasons as well which extend into our remote client work. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2288 from vrothberg/vendor-docsOpenShift Merge Robot2019-02-07
|\ | | | | Vendor docs
| * make vendor: always check for latest vndrValentin Rothberg2019-02-07
| | | | | | | | | | | | | | | | | | | | | | | | @baude and I have recently debugged a `make vendor` issue, where different versions of `vndr` leave slightly different states behind. This ultimately leads to inconsistencies with the CI, which always fetches the latest version. To avoid such issues in the future, always use the latest version of `vndr` by checking for new versions of it prior to execution. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Add varlink generate to the make documentationHervé Beraud2019-02-07
|/ | | | | | | Minor improvement who add helping comment to the varlink generate target. Signed-off-by: Hervé Beraud <hberaud@redhat.com>
* Merge pull request #2283 from 4383/improve-makefileOpenShift Merge Robot2019-02-06
|\ | | | | Generate make helping message dynamicaly.
| * Generate make helping message dynamicaly.Hervé Beraud2019-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generate make helping message dynamicaly by using python code snippet inside Makefile. All commented make targets will be added to the help message. To be added to the helping message comment need to start with '## '. These specials comments are detected by the python code. Python code generate the helping output from these results. Notice that this commit introduce a dependency with python (compatible python 2 and 3). Signed-off-by: Hervé Beraud <hberaud@redhat.com>
* | Makefile: minor fix to reenable system testsEd Santiago2019-02-06
|/ | | | | | | | | | PR #2259 removed the .install.gomega Makefile target but didn't clean up two references to it. Do so now. Also, when setting up GOPKGBASEDIR symlink, use -f (force) flag; otherwise subsequent makes will fail. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #2270 from cevich/fail_fasterOpenShift Merge Robot2019-02-06
|\ | | | | Apply 45min timeout to integration tests
| * Apply 50min timeout to integration testsChris Evich2019-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IMHO, longer than this waiting for automated testing is "too long". Scientificaly speaking, based on thousands of runs across many platforms, successful runs always happen in less time. Normally Ubuntu passes in 35-40 minutes, and the Fedoras do it in 25-30. If they take longer, something is likely badly broken. In that case, it's better to fail within a short/defined time, than wait for the (much longer) automation-level timeout and inevitable failure. Signed-off-by: Chris Evich <cevich@redhat.com>
* | Cirrus: add vendor_check_taskValentin Rothberg2019-02-06
| | | | | | | | | | | | | | | | | | | | | | * Make sure that all vendored dependencies are in sync with the code and the vendor.conf by running `make vendor` with a follow-up status check of the git tree. * Vendor ginkgo and gomega to include the test dependencies. Signed-off-by: Chris Evic <cevich@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | tests: allow to override the OCI runtimeGiuseppe Scrivano2019-02-05
|/ | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #2253 from kunalkushwaha/quick-dockerfile-buildOpenShift Merge Robot2019-02-04
|\ | | | | Reduce Dockerfile based build time for libpod.
| * Reduce Dockerfile based build time for libpod.Kunal Kushwaha2019-02-01
| | | | | | | | | | | | | | libpod code added at end of Dockerfile, avoids git clone of other packages in Dockerfile on subsequent builds. Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
* | Set SELinux type on bin/podman after installChris Evich2019-01-30
|/ | | | | | | | | | | Different components of testing reference the podman binary differently. While they are identical in content, their SELinux types are not the same, depending on build location. Avoid confusion and test failures by always matching the bin/podman SELinux type to that of $BINDIR/podman **after** install. This ensures even if the code or default contexts change, a subsequent `make install` will re-match the SELinux type. Signed-off-by: Chris Evich <cevich@redhat.com>
* Update README for v1.0.0Matthew Heon2019-01-16
| | | | | | | Also bump gitvalidation epoch - we usually do this every release, but v1.0.0 is on a branch so we need a separate commit for master Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Add darwin support for remote-clientbaude2019-01-11
| | | | | | | | Add the ability to cross-compile podman remote for OSX. Also, add image exists and tag to remote-client. Signed-off-by: baude <bbaude@redhat.com>
* vendor make targetValentin Rothberg2019-01-11
| | | | | | | Add a `make vendor` target calls `vndr` with a specified whitelist to avoid deleting important files (currently the varlink/go project). Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Remove easyjson in preparation for switch to jsoniterMatthew Heon2019-01-10
| | | | | | | | | The jsoniter library does not require code generation, which is a massive advantage over easyjson (it's also about the same in performance). Begin moving over to it by removing the existing easyjson code. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move python code from contrib to it's own repo python-podmanJhon Honce2019-01-10
| | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add Validate completionsDaniel J Walsh2019-01-08
| | | | | | | | In podman 0.12.0 we have invalid completions. These should have been caught during testing. This check will throw an error if the completions do not successfully execute. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #2098 from baude/remoteOpenShift Merge Robot2019-01-07
|\ | | | | Add ability to build golang remote client
| * Add ability to build golang remote clientbaude2019-01-07
| | | | | | | | | | | | | | | | | | | | | | Add the ability to build a remote client in golang that uses all the same front-end cli code and output code. The initial limitations here are that it can only be a local client while the bridge and resolver code is being written for the golang varlink client. Tests and docs will be added in subsequent PRs. Signed-off-by: baude <bbaude@redhat.com>
* | Readd Python testingMatthew Heon2019-01-04
| | | | | | | | | | | | | | We accidentally merged a PR with a commit temporarily disabling the Python tests. Reenable them here. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | DO NOT MERGE temporarily remove python testsMatthew Heon2019-01-04
| | | | | | | | | | | | | | | | | | It's impossible to get good debug out of the python tests, so nuke them for now so I can figure out what's wrong. DO NOT MERGE THIS COMMIT Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | add container-init supportValentin Rothberg2019-01-04
|/ | | | | | | | | | | | | | | | | | | Add support for executing an init binary as PID 1 in a container to forward signals and reap processes. When the `--init` flag is set for podman-create or podman-run, the init binary is bind-mounted to `/dev/init` in the container and "/dev/init --" is prepended to the container's command. The default base path of the container-init binary is `/usr/libexec/podman` while the default binary is catatonit [1]. This default can be changed permanently via the `init_path` field in the `libpod.conf` configuration file (which is recommended for packaging) or temporarily via the `--init-path` flag of podman-create and podman-run. [1] https://github.com/openSUSE/catatonit Fixes: #1670 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #1757 from kunalkushwaha/contrib-perftestOpenShift Merge Robot2018-12-20
|\ | | | | perf test a stress test to profile CPU load of podman
| * perf test a stress test to profile CPU load of podmanKunal Kushwaha2018-12-19
| | | | | | | | Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
* | Makefile: validate that each commit can at least buildGiuseppe Scrivano2018-12-19
|/ | | | | | | | | it is very useful when using git bisect that at least the commit can build. got inspiration from: https://twitter.com/pid_eins/status/1072797993760423941 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Bump gitvalidation epochMatthew Heon2018-12-13
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Makefile tweaks to fix make shellMatthew Heon2018-12-12
| | | | | | | | | Also, bump the Dockerfile to use the latest Golang image, as most of our testing is now done on 1.11 Fixes: #1999 Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* No need to use `-i` in go build (with go 1.10 and above)Vincent Demeester2018-12-11
| | | | | | | | | | | | | | | > The go build command now maintains a cache of recently built packages, separate from the installed packages in $GOROOT/pkg or $GOPATH/pkg. The effect of the cache should be to speed builds that do not explicitly install packages or when switching between different copies of source code (for example, when changing back and forth between different branches in a version control system). The old advice to add the -i flag for speed, as in go build -i or go test -i, is no longer necessary: builds run just as fast without -i. This should also fix podman builds for NixOS, snap-installed go, … Signed-off-by: Vincent Demeester <vdemeest@redhat.com>
* Bump gitvalidation epochMatthew Heon2018-12-07
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Merge pull request #1788 from cevich/cirrus_base_imagesOpenShift Merge Robot2018-12-07
|\ | | | | Codify and document base-image production + Enable testing with Fedora
| * Cirrus: Use Makefile for image-buildingChris Evich2018-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The packer tool takes JSON as input for the details of producing VM images to be used for PR CI-testing. JSON is not a very human-friendly format, without support for comments and frequently containing lots of duplicate data. Fix this by using a Makefile + simple python one-liner to convert from a human-friendly YAML format into packer-native JSON. This allows use of anchors/aliases to reduce duplication, and allows inline comments for easier maintainability. This also allows separating the 'test' action from the 'build' action, for earlier and better syntax problem detection. Lastly, there are some minor ``lib.sh`` and ``integration_test.sh`` updates to support future work, and slightly improve the build and test environments. Signed-off-by: Chris Evich <cevich@redhat.com>
* | Bump gitvalidation epochMatthew Heon2018-12-06
|/ | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Merge pull request #1385 from ypu/systemtestOpenShift Merge Robot2018-11-16
|\ | | | | Add system test with ginkgo
| * Add a rule to compile system test in MakefileYiqiao Pu2018-11-16
| | | | | | | | Signed-off-by: Yiqiao Pu <ypu@redhat.com>
| * The system test write with ginkgoYiqiao Pu2018-11-16
| | | | | | | | | | | | | | | | The tests can be filter by --focus and --skip to fit different test target. Also be able to set global options and cmd options by export it to ENV to fit different test matrix. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
| * Separate common used test functions and structs to test/utilsYiqiao Pu2018-11-16
| | | | | | | | | | | | | | Put common used test functions and structs to a separated package. So we can use them for more testsuites. Signed-off-by: Yiqiao Pu <ypu@redhat.com>
* | Merge pull request #1756 from isimluk/update-dependent-metalinterOpenShift Merge Robot2018-11-16
|\ \ | |/ |/| Update metalinter dependency
| * Lint: Update metalinter dependencyŠimon Lukašík2018-11-10
| | | | | | | | | | | | | | | | | | | | | | | | We fixated on old metalinter dependency in past based on experience of metalinter being oftentimes broke and hence broking our build. See 762f508d9ca97cdbaee6053b663e98aee9cae081 in cri-o for more details. Now, dated metalinter is messing up with my environment (like it is panicing on containters/storage) so let's see if we can move to more current version of metalinter. Signed-off-by: Šimon Lukašík <slukasik@redhat.com>
* | Bump gitvalidation epochMatthew Heon2018-11-15
|/ | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Bump gitvalidation epochMatthew Heon2018-11-08
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Do never override podman with dockerŠimon Lukašík2018-11-03
| | | | Signed-off-by: Šimon Lukašík <slukasik@redhat.com>
* Fix setting of version informationAnders F Björklund2018-10-31
| | | | | | | It was setting the wrong variable (CamelCase) in the wrong module ("main", not "libpod")... Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
* Eat our own dogfoodDaniel J Walsh2018-10-23
| | | | | | | Switch all tests to use podman installed on the system, or Docker if podman does not exist. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Bump gitvalidation epochMatthew Heon2018-10-17
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Bump gitvalidation epochMatthew Heon2018-10-17
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 12:54:30 +0000