summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAge
* add kubernetes pauseValentin Rothberg2021-10-26
| | | | | | | | | | | Add the k8s pause binary to `pause/pause.c` and do the plumbing in the Makefile to install it in $libexec/podman/pause/pause. It is intended to replace the k8s pause image and hence the need for network connectivity when creating pods. [NO NEW TESTS NEEDED] since it will be tested in a following commit. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Use CGO_ENABLED=1 when building natively on darwinJhon Honce2021-10-14
| | | | | | | | | | | Need to use CGO for mDNS resolution, but cross builds need CGO disabled See https://github.com/golang/go/issues/12524 for details Note: Homebrew forumla will need to be updated to pick up this change Fixes #10737 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* rootlessport: reduce memory usage of the processPaul Holzinger2021-10-12
| | | | | | | | | | | | | | | | | | | | | | Don't use reexec for the rootlessport process, instead make it a separate binary to reduce the memory usage. The problem with reexec is that it will import all packages that podman uses and therefore loads a lot of stuff into the heap. The rootlessport process however only needs the rootlesskit library. The memory usage is a concern since the rootlessport process will spawn two process per container which has ports forwarded. The processes stay until the container dies. On my laptop the current reexec version uses 47800 KB RSS. The new separate binary only uses 4540 KB RSS. This is more than a 90% improvement. The Makefile has been updated to compile the new binary and install it to the libexec directory. Fixes #10790 [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Unit files: Use actual installed path for podmanEd Santiago2021-10-12
| | | | | | | | | | | | | | | | | | | | | Don't hardcode /usr/bin/podman in unit files: instead, use template files with a path replaced at install time. Because 'make' can be invoked repeatedly, with different PREFIX, do not leave the generated files behind in our work directory: wipe them immediately after install. To get this to work, fix a longstanding bug in podman.spec.in, a PREFIX that should've been DESTDIR. Side note: #7023 made contrib/systemd/user a symlink to .../system but did not update paths in Makefile. The unrelated-looking path change you see here is a belated correction for that. Fixes: #10787 Signed-off-by: Ed Santiago <santiago@redhat.com>
* Fix contributor make targets on Ubuntu and DebianAnders F Björklund2021-09-28
| | | | | | | | It was trying to run a bash script with sh [NO TESTS NEEDED] This changes "make lint" Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
* Merge pull request #11760 from rhatdan/dockerfileOpenShift Merge Robot2021-09-28
|\ | | | | Add dockerfile.5 as man link to containerfile man page
| * Add dockerfile.5 as man link to containerfile man pageDaniel J Walsh2021-09-27
| | | | | | | | | | | | | | | | | | | | containers-common now ships a containerfile man page, this patch adds a link to dockerfile.5 so that if user installs podman-docker package man dockerfile will work. [NO TESTS NEEDED] since this is just a man page change. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Set MSI to be 64-bit only.Easton Pillay2021-09-27
|/ | | | | | Hi there! I noticed that the MSI file built for Windows was building in 32-bit mode, even though Podman is 64-bit only. I added a flag to wixl in the Makefile to tell it to build a 64-bit MSI, and I adjusted the podman.wxs file to use the right settings for 64-bit programs. Signed-off-by: GitHub <noreply@github.com>
* Makefile: use -ldflags/-gccgoflags depending on the go implemenatitonДилян Палаузов2021-09-23
| | | | | | | | | | | | | Insisting on “DCO” imposes formalities, that serve self-purpose. One cannot assume that the submitter has time or will to read texts about symbolism in software contributions. If the system wants to see the text nrEAUIEUAIe eanuitdnuae EAIUEAUIAIE »ℓ§444.3.72b)°»°ℓ§euaieauuae in each commit, people will write this, or any other text, that the system wants to see. All such text, which presence is mandated by the system, has the same value. Signed-off-by: Дилян Палаузов <git-dpa@aegee.org>
* Cross-build release-archives w/ arch in filenameChris Evich2021-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes #11417 Cross-building the podman-remote documentation requires a functional native architecture executable. However `make` only deals with files/timestamps, it doesn't understand if an existing binary will function on the system or not. This makes building cross-platform releases incredibly accident-prone and fragile. A practical way to deal with this, is via multiple conditional (nested) `make` calls along with careful manipulation of `$GOOS` and `$GOARCH`. Also, when cross-building releases be kind to humans and cleanup any non-native binaries left behind. Update the `Alt Arch. Cross` Cirrus-CI task to build release archives for all Linux architectures supported by golang and podman. Update the `OSX Cross` task to additionally build for the M1 (arm64) architecture. Finally, update the release process documentation to reflect the new locations (Cirrus-CI task names) for the release archives. Include a note about additional manual work being required to produce the signed `.dmg` file for MacOS. Signed-off-by: Chris Evich <cevich@redhat.com>
* Fix Error, empty output for info: 'VERSION'Chris Evich2021-09-21
| | | | | | | | | | | | | | | | | | | | | When building releases, the definitive canonical version of podman (or podman-remote) is needed. Previously this was accomplished by scraping `version/version.go`. However, due to tooling differences across platforms, this has proven problematic, unreliable, and hard to maintain. Fix this by building and caching a small golang binary who's only purpose is to print the version number to stdout. This not only provides a quick and reliable way to determine the current version, it also acts as a check on the version API vs tooling that relies on it. Lastly, remove several `RELEASE_*` Makefile definitions which aren't actually used anywhere. These were originally added a very long time ago to serve as part of a long since retired release process. The remaining items, were updated to make use of the new `.podmanversion` binary on an as-required basis (i.e. not every time `make` is run). Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Run unit-tests rootlessChris Evich2021-09-09
| | | | | | | | | | Previously (for various reasons) the unittests were limited by the Makefile to root-only. However, experimentation via PR #11490 shows they will actually execute and pass when run as a regular user. Enable this for only the latest Fedora VMs, so as to only add one new task to the (already large) set. Signed-off-by: Chris Evich <cevich@redhat.com>
* Remove changelog.txt from the repositoryjesperpedersen2021-09-07
| | | | | | | | | | | The changelog.txt file hasn't been kept in sync with release tags, especially on main, so remove it. The release notes will be featured in RELEASE_NOTES.md. Signed-off-by: jesperpedersen <jesper.pedersen@redhat.com> [NO TESTS NEEDED]
* Add support for libsubidDaniel J Walsh2021-08-27
| | | | | | | | | This will enable remote access to /etc/subuid and /etc/subgid information from ldap services, if shadow-utils ships with a libsubid. [NO TESTS NEEDED] Since we have no way to test this. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #11169 from cevich/enable_docker_py_testingopenshift-ci[bot]2021-08-16
|\ | | | | Enable docker-py compat. testing w/ ignored result
| * Enable docker-py compat. testing w/ ignored resultChris Evich2021-08-09
| | | | | | | | | | | | | | | | | | | | Significant bitrot results in almost immediate test failure. This commit adds only the very basic, bare-minimum needed to get them started. ***TESTING RESULTS ARE IGNORED*** Signed-off-by: Chris Evich <cevich@redhat.com>
* | Run codespell to fix spellingDaniel J Walsh2021-08-11
| | | | | | | | | | | | [NO TESTS NEEDED] Just fixing spelling. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Reproducible Builds: trim embedded cgo pathskpcyrd2021-08-09
|/ | | | Signed-off-by: kpcyrd <git@rxv.cc>
* [CI:DOCS] tests-expect-exit: include source line numbersEd Santiago2021-08-04
| | | | | | | | | | In the new check for preventing 'Expect(ExitCode...)', include source line numbers. Response to #11034, which I totally didn't even understand because it was referencing a different test. Sorry, Brent. Signed-off-by: Ed Santiago <santiago@redhat.com>
* buildah bud tests under podman-remoteEd Santiago2021-07-28
| | | | | | | | | | | | | | | | New functionality -- mostly in the diffs we apply to buildah's helpers.bash -- to enable running buildah-bud tests under podman-remote. The gist of it is, we start a 'podman system service' before each test, and clean it up on test exit. Design decision: the diff file for helpers.bash is no longer trailing-whitespace-clean: that ended up producing diffs that git wouldn't apply, because in some cases the whitespace is actually important. In order to pass CI, we need to exclude this file from some checks. Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: prevent 'Expect(ExitCode())' patternEd Santiago2021-07-20
| | | | | | | | | | | | | | | | | Followup to #10932: add a validation check to prevent introduction of new 'Expect(foo.ExitCode()).To(...)' patterns. If such use is absolutely necessary -- there is one such instance in the code already -- require that the assertion include a description. Also: clean up instances that were introduced since the merging of #10932. Also: fix one remaining instance in run_exit_test.go: it had a FIXME comment mentioning a race condition, but unfortunately there was no issue or bug ID, hence no way to know if the race is fixed or not. We will assume it is. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Cirrus: Fixes due to master->main renameChris Evich2021-06-30
| | | | Signed-off-by: Chris Evich <cevich@redhat.com>
* Merge pull request #10803 from lsm5/remove-cni-conflistOpenShift Merge Robot2021-06-29
|\ | | | | Makefile: remove install.cni
| * Makefile: remove install.cniLokesh Mandvekar2021-06-28
| | | | | | | | | | | | | | We no longer need to install /etc/cni/net.d/87-podman-bridge.conflist so install.cni isn't needed either. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* | prefix `ETCDIR` with `${PREFIX}/`tobwen2021-06-26
|/ | | | | | `ETCDIR` isn't prefixed and led to dangling files in `DESTDIR/etc` Signed-off-by: Tobias Wendorff <1864057+tobwen@users.noreply.github.com>
* Merge pull request #10679 from cevich/fix_static_buildOpenShift Merge Robot2021-06-15
|\ | | | | Fix building static podman-remote
| * Fix building static podman-remoteChris Evich2021-06-14
| | | | | | | | | | | | | | | | | | | | As near as I can tell, sometime between `v1.6.4` and `v1.9` the definition of `LDFLAGS_PODMAN_STATIC` was both created and lost. Additionally, after a refactoring of the `Makefile` it was possible to enable CGO (which will cause a dynamic binary to be built). Fix both issues by adding the missing definition and forcing CGO to be disabled. Signed-off-by: Chris Evich <cevich@redhat.com>
* | Merge pull request #10595 from boaz0/closes_10539OpenShift Merge Robot2021-06-15
|\ \ | |/ |/| Add podman-restart systemd unit file
| * Restart all containers with restart-policy=always on bootBoaz Shuster2021-06-13
| | | | | | | | | | | | | | * Add podman-restart systemd unit file and add it to podman RPM package * Fix podman start to filter all containers + unit test Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* | Merge pull request #10601 from Procyhon/07062021_manpageOpenShift Merge Robot2021-06-12
|\ \ | | | | | | [CI:DOCS] UPDATE manpages with MANPAGE_SYNTAX
| * | UPDATE manpages with MANPAGE_SYNTAXAlexander Richter2021-06-12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following manpages have been adapted to the MANPAGE_SYNTAX: - podman-completion - podman-container-checkpoint - podman-container-cleanup - podman-container-exists The following manpages have had little changes: - podman-attach - podman-commit - MANPAGE_SYNTAX - Makefile Signed-off-by: Alexander Richter <67486332+Procyhon@users.noreply.github.com>
* / Update nix pin with `make nixpkgs`Wong Hoi Sing Edison2021-06-10
|/ | | | | | | | - Bugfix `make nixpkgs` which pin with branch `nixos-21.05` - Code lint with `nixpkgs-fmt` - Code sync between x86\_64 and aarch64 Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* UPDATE MANPAGE_SYNTAX (commit,attach,auto-update)Alexander Richter2021-06-06
| | | | | | | Updated version for the MANPAGE_SYNTAX and adaption of the syntax for the manpages of podman-commit, podman-attach, and podman-auto-update. Signed-off-by: Alexander Richter <67486332+Procyhon@users.noreply.github.com>
* Handle hard links in remote buildsDaniel J Walsh2021-05-22
| | | | | | Fixes: https://github.com/containers/podman/issues/9893 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Break up python APIv2 testsJhon Honce2021-05-18
| | | | | | | | | | | | | | * Tests broken up into areas of concern * Introduced fixtures to reduce duplicated code * Introduced new assert methods with APITestCase * General cleanup of code while visiting * Tests now targeting quay.io Known issues: * is-official against quay.io not working Fixes: #9238 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add documentation on short-namesDaniel J Walsh2021-05-07
| | | | | | | | | Once we settle on the wording for short-names in podman-pull, I will add the same section to all of the podman commands that use pull. Also ran through all man pages with a spell checker. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* [CI:DOCS] Restore missing content to manpagesRob Cowsill2021-04-25
| | | | | | | | | | | | | | The following content was omitted: - Text after the first markdown link on a line to the end of the last (in lines with multiple markdown links) - Email addresses of the form <a...@...> Fixed by: - Making the first two regexes match each link individually, instead of matching from the start of the first link to the end of the last - Making the last regex specifically match <a> and </a> tags Signed-off-by: Rob Cowsill <42620235+rcowsill@users.noreply.github.com>
* Fixes from make codespellDaniel J Walsh2021-04-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Update nix pin with `make nixpkgs`Wong Hoi Sing Edison2021-04-14
| | | | Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* Overhaul Makefile binary and release worflowsChris Evich2021-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Incorporate changes from abandoned #9918: Use dedicated `bin` sub-directories for `windows` and `darwin` when building `podman-remote`. The linux flavor remains under `bin` as before. * Fix MacOS Documentation-generation for release-packaging. The `install-podman-remote-%-docs` target requires local execution of `podman-remote`, but it was assuming GOOS=linux. Fix this by dynamically discovering the local OS/architecture type while still permitting cross-building of MacOS binaries under Linux. * Unify temporary directory/file behavior to use a common template. In case of left-over temporary items left in the repository, update the `clean` target accordingly to remove them. * Fix broken podman-remote-static and MacOS release archive targets mismatching the `podman-remote-%` target. Disambiguate this target for all platforms by spelling each out in full, instead of using a wild-card recipe. * Fix Windows-installer target to properly recognize existing output files and not constantly rebuild every time. * Include the podman version number in the Windows-installer target in case a user downloads multiple releases. * Include a subdirectory containing the podman version number for both `tar.gz` and `zip` targets. This prevents users clobbering existing directories when un-archiving from releases. Signed-off-by: Chris Evich <cevich@redhat.com>
* Reorganize Makefile with sections and guideChris Evich2021-04-12
| | | | | | | | | | | | | | | | | Over several years the podman Makefile has become a bloated complex mess. This impedes both debugging and maintenance, besides causing general eye-strain. Fix this by adding a simple navigation/layout guide, to help developers quickly find what's needed. Re-organize the entire file according to the new layout guide. Add section headers that call out the purpose of the encompassed content, and are easy to locate with search-tools. Note: No recipes or definitions have been altered by this commit, only re-arranged. Signed-off-by: Chris Evich <cevich@redhat.com>
* Simplify Makefile help targetChris Evich2021-04-12
| | | | | | | | | | | | | | | | | | An in-line Python script, while flexible, is arguably more complex and less stable than the long-lived `grep`, `awk`, and `printf`. Make use of these simple tools to display a column-aligned table of target and description help output. Also, the first target that appears in a Makefile is considered the default (when no target is specified on the command-line). However, despite it's name, the `default` target was not listed first. Fix this, and redefine "default" target to "all" as intended, instead of "help". Lastly, add a small workaround for a vim syntax-hilighting bug. Signed-off-by: Chris Evich <cevich@redhat.com>
* Don't shell to obtain current directoryChris Evich2021-04-12
| | | | | | | | | | | Instead of shelling out frequently to resolve the current directory, use the Makefile built-in `$(CURDIR)`. It has the exact same meaning w/in the context of a `Makefile`. Ref.: https://www.gnu.org/software/make/manual/html_node/Quick-Reference.html Signed-off-by: Chris Evich <cevich@redhat.com>
* Remove unnecessary/not-needed release.txt targetChris Evich2021-04-12
| | | | | | | | Previously this was needed for an automated release process. That automation has long since been removed. Simplify the Makefile by removing the target and references. Signed-off-by: Chris Evich <cevich@redhat.com>
* Bump go.sum + Makefile for golang 1.16Chris Evich2021-04-07
| | | | Signed-off-by: Chris Evich <cevich@redhat.com>
* [NO TESTS NEEDED] Update nix pin with `make nixpkgs`Wong Hoi Sing Edison2021-04-06
| | | | | | | | - Bugfix `make nixpkgs` which pin with branch `nixos-20.09` - Code lint with `nixpkgs-fmt` - Code sync between x86\_64 and aarch64 Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
* Makefile: introduce install.docker-fullMorten Linderud2021-03-31
| | | | | | | | | | The split of install.docker and install.docker-docs makes some sense but there should be some way to specify both for packagers. This introduces `make install.docker-full` which installs both the docker binary and the documentation. Signed-off-by: Morten Linderud <morten@linderud.pw>
* Makefile: ensure install.docker creates BINDIRMorten Linderud2021-03-31
| | | | | | | | | Commit 3908c00799fe2af1a12c9c4f4be8b49dbdecd9be introduces a split for installing the docker binary and the docker documentation. The install line creating BINDIR and MANDIR was both moved to the install.docker-docs path which makes `install.docker` fail. Signed-off-by: Morten Linderud <morten@linderud.pw>
* Add powershell completionsPaul Holzinger2021-03-29
| | | | | | | | | Add support for generating powershell completion files. This is especially useful for people using the podman remote client on windows. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Makefile: add install.docker-docs-nobuild for packaging useLokesh Mandvekar2021-03-03
| | | | | | | | | This will allow installation of the manpages without the need to rebuild them in the installation stage of distro packaging. [NO TESTS NEEDED] Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-06 15:37:37 +0000