summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAge
* golangci-lint: update to v1.46.2Paul Holzinger2022-06-15
| | | | | | | | | | | | Update to the latest golangci-lint version. v1.46 added new linters. I disabled nonamedreturns and exhaustruct since they enforce a certain code style and using them would require big changes to the code base. The nosprintfhostport is new and I fixed one problem in the tests. While the test itself is fine because it uses ipv4 only the linter still looks good because the sprintf use will fail for ipv6 addresses. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Makefile: Handle unexpected empty var. valuesChris Evich2022-06-01
| | | | | | | | | | | | | | | | | | Fixes #14021 Substitution values built from `$(shell ...)` output can easily be empty due to the shell's default `pipefail` behavior. This can also hide non-zero exit codes, similarly resulting in empty values being set. While not a perfect fix, the situation is improved by using the `err_if_empty` function in all cases where empty values would be unexpected. Remove the definitions for `GIT_BRANCH` and `GIT_BRANCH_CLEAN` which don't seem to actually be used anywhere (including in code). Add a simple release-test to verify `podman info` outputs a non-empty value for "GitCommit". Signed-off-by: Chris Evich <cevich@redhat.com>
* Makefile: force podman-remote-static to linuxPaul Holzinger2022-06-01
| | | | | | | | | Some of the targets overwrite $GOOS. Since podman-remote-static should always build for linux we can force linux GOOS here. Fixes #14201 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #13870 from kolyshkin/makefile-cleanupsOpenShift Merge Robot2022-05-19
|\ | | | | Makefile: simplify for modern Go
| * Remove GO111MODULES useKir Kolyshkin2022-05-17
| | | | | | | | | | | | Using it is no longer needed. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile: rm gofmt targetKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | It is superceded by golangci-lint, which has gofmt as one of the linters. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile: rm CHANGELOG_* and ISODATE varsKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | Those are not used since commit 0d1ba0a58fdb15af7e. Fixes: 0d1ba0a58fdb15af7 Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile: rm -mod=vendorKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | "go build" no longer requires explicit "-mod=vendor", as this is the default since go 1.14. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Move GOPROXY from Makefile to cirrus.ymlKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | | | | | | | | | GOPROXY's default value is "https://proxy.golang.org,direct" since go 1.13, so it is redundant to set it explicitly. For some reason though, GOPROXY in Cirrus CI is set to direct, which makes things such as go mod tidy very slow. So, set the proper (default) value for in in .cirrus.yml. Do the same for GOSUMDB. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile, podman.spec.rpkg: rm GOBIN and GOPATHKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove GOPATH setting as since Go 1.9 it defaults to $HOME/go (for earlier versions it had to be specified explicitly). Remove GOPATH-related code from the spec, using relative paths when compiling packages, and enable Go modules, simplifying the spec. Remove support for multiple paths in GOPATH (which is rarely used and doesn't really work with modules). Remove setting GOBIN, rely on $GOPATH/bin instead. In case GOBIN is explicitly set (which is highly unlikely), forcefully ignore by unsetting it. Remove GOBIN from tools invocation since we added GOPATH/bin to PATH. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile,.gitignore: rm .install.goimportsKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | | | Recent commit 3b9177995e0124beb064ef8615ba9a2ae7ca4f4b removes this target, but some artifacts remain. Remove those. Fixes: 3b9177995e0124beb064ef8615ba9a2ae7ca4f4b Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile: rm .gopathokKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | | | | | | | Since about Go 1.10 (or whereabouts) the specific package structure is no longer required. This also removes GOPKGDIR and GOPKGBASEDIR as they were only used by gopathok. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
| * Makefile: rm .install.libseccomp.sudo targetKir Kolyshkin2022-05-17
| | | | | | | | | | | | | | | | | | | | | | | | This was originally added in commit a824186ac9803ef to be used from Travis CI. Travis was removed in commit 8771a03af1f17f and there is no need to have this target ever since (October 2018). Also, remove the comment about BUILD_TAGS, which originally belonged to varlink target (removed by commit f62a356515e387b0) but got misplaced later. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* | k8systemd: run k8s workloads in systemdValentin Rothberg2022-05-17
|/ | | | | | | | | | | | | | | | | | | | Support running `podman play kube` in systemd by exploiting the previously added "service containers". During `play kube`, a service container is started before all the pods and containers, and is stopped last. The service container communicates its conmon PID via sdnotify. Add a new systemd template to dispatch such k8s workloads. The argument of the template is the path to the k8s file. Note that the path must be escaped for systemd not to bark: Let's assume we have a `top.yaml` file in the home directory: ``` $ escaped=$(systemd-escape ~/top.yaml) $ systemctl --user start podman-play-kube@$escaped.service ``` Closes: https://issues.redhat.com/browse/RUN-1287 Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Fix broken pwdEd Santiago2022-05-12
| | | | | | Broken in #14191, merged unintentionally Signed-off-by: Ed Santiago <santiago@redhat.com>
* [CI:DOCS] fix `make localbenchmarks`Valentin Rothberg2022-05-11
| | | | | | | | Since `./hack` has been removed from the Makefile's path, add it back for `make localbenchmarks` to make `podman-registry` binary available for running local registries. Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Cirrus: Fix Makefile including 'hack' in $PATHChris Evich2022-05-10
| | | | | | | | This path should never, ever, ever be included in `$PATH` as it is almost guaranteed to cause serious and non-obvious breakage in CI. Fix it and include a warning comment. Signed-off-by: Chris Evich <cevich@redhat.com>
* exclude new tools vendor dir from validatePaul Holzinger2022-05-04
| | | | | | We have no control over the code in the vendored files. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* vendor test tools in submodulePaul Holzinger2022-05-04
| | | | | | | | | | Instead of using the main module we should vendor the test tools in a different directory. That way we do not add extra dependencies to the main module which can be problemetic for packages or other users. This is already done in buildah so this makes us more consitent. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* vendor test dependencies instead of installing via networkPaul Holzinger2022-05-03
| | | | | | | | | | | | | We can vendor the test dependencies such as go-md2man, git-validation and goimports. This allows us to always install the same version as specified in go.mod. Also we do not rely on a network connection for this. The advantage with this method is that dependabot will also update the dependencies for us and we do not have to hardcode versions in the Makefile. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* CI: emergency fix for broken go getPaul Holzinger2022-05-02
| | | | | | | | | | go get is deprecated, we should use go install instead. Also for some reason go get -u golang.org/x/tools/cmd/goimports is broken at the moment, thus failing CI jobs where we have to install this. Switching to go install seems to fix it. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* benchmarks: add more image benchmarksValentin Rothberg2022-04-26
| | | | | | | | Add more benchmarks for the most common and performance-critical image commands. Benchmarks for `podman build` should go into a separate section. Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Add podman machine test suiteBrent Baude2022-04-25
| | | | | | | | | | | | | This PR introduces a test suite for podman machine. It can currently be run on developers' local machines and is not part of the official CI testing; however, the expectation is that any work on machine should come with an accompanying test. At present, the test must be run on Linux. It is untested on Darwin. There is no Makefile target for the test. It can be run like `ginkgo -v pkg/machine/test/.`. It should be run as a unprivileged user. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Increase verbosity and sequencing of APIv2 testingChris Evich2022-04-22
| | | | | | | | | | | The default verbosity level does not show the classes or function names. This makes it difficult to debug problems like hangs. Also, separate the bats and python-based tests into two sections. This allows for easier debugging, since isolation can be done in `runner.sh` rather than mucking with the `Makefile`. Lastly, update the logformatter script to `autoflush stdout` (thanks @edsantiago). Signed-off-by: Chris Evich <cevich@redhat.com>
* enable staticcheck linterPaul Holzinger2022-04-22
| | | | | | | Fix many problems reported by the staticcheck linter, including many real bugs! Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* benchmarking Podman: proof of conceptValentin Rothberg2022-04-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a proof of concept for benchmarking Podman. The benchmarks are implemented by means of the end-to-end test suite but hidden behind a `benchmarks` build tag. Running `make localbenchmarks` will run `test/e2e` with the specific build tag and set ginkgo's "focus" to the specific "Podman Benchmark Suite" to only run this spec and skip all others. ginkgo will print a report before terminating listing the CPU and memory stats for each benchmark. New benchmarks can easily be added via the `newBenchmark` function that also supports adding an `init()` function to each benchmark which allows for performing certain setups for the specific benchmark. For instance, benchmarking `podman start` requires creating a container beforehand. Podman may be called more than once in the main function of a benchmark but note that the displayed memory consumption is then a sum of all Podman invocations. The memory consumption is collected via `/usr/bin/time`. A benchmark's report is split into CPU and memory as displayed below: ``` [CPU] podman images: Fastest Time: 0.146s Slowest Time: 0.187s Average Time: 0.180s ± 0.015s [MEM] podman images: Smallest: 41892.0KB Largest: 42792.0KB Average: 42380.7KB ± 286.4KB ``` Note that the benchmarks are not wired into the CI yet. They are meant as a proof of concept. More benchmarks and the plumbing into CI will happen in a later change. Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Merge pull request #13602 from edsantiago/size_check_part2OpenShift Merge Robot2022-03-24
|\ | | | | Binary growth check, part 2 of 2
| * Binary growth check, part 2 of 2Ed Santiago2022-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a CI check to prevent unwanted bloat in binary images, by building a baseline (pre-PR) binary then comparing file sizes post-PR. Part 1 (#13518) added a new script that runs multiple 'make's, comparing image sizes against an original, and failing loudly if growth is too big. An override mechanism is defined. This is part 2 of 2: adding the CI rule. We couldn't do that in part 1, because the rule would call a script that didn't exist in the pre-PR commit. Signed-off-by: Ed Santiago <santiago@redhat.com>
* | Remove nix packages, since no one is supporting thisDaniel J Walsh2022-03-23
|/ | | | | | [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Makefile: build podman-remote-static with cgo disabledLokesh Mandvekar2022-03-21
| | | | | | | | Resolves: #13557 [NO NEW TESTS NEEDED] Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* bump golangci-lint to v1.45.0Valentin Rothberg2022-03-21
| | | | | | | | | | * supports Go 1.18 * disable a number of new linters * fix minor stylecheck issues [NO NEW TESTS NEEDED] Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Fix windows win-sshproxy buildPaul Holzinger2022-03-15
| | | | | | | | | Github no longer supports the unauthenticated git protocol, so switch to using https instead. https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Bump golang to 1.17 in `vendor-in-container`Pascal Bourdier2022-03-11
| | | | | | Go 1.17 compiler got faster Signed-off-by: Pascal Bourdier <pascal.bourdier@gmail.com>
* Move all python tests to pytestJhon Honce2022-03-04
| | | | | | | * Add configuration to add report header for python client used in tests * Move report headers into the individual test runners vs runner.sh Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #13380 from jwhonce/wip/docker-pyOpenShift Merge Robot2022-03-01
|\ | | | | Refactor docker-py compatibility tests
| * Refactor docker-py compatibility testsJhon Honce2022-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add which python client is being used to run tests, see "python client" below. * Remove redundate code from test classes * Update/Add comments to modules and classes ======================================================= test session starts ======================================================== platform linux -- Python 3.10.0, pytest-6.2.4, py-1.10.0, pluggy-0.13.1 python client -- DockerClient rootdir: /home/jhonce/Projects/go/src/github.com/containers/podman plugins: requests-mock-1.8.0 collected 33 items test/python/docker/compat/test_containers.py ...s.............. [ 54%] test/python/docker/compat/test_images.py ............ [ 90%] test/python/docker/compat/test_system.py ... [100%] Note: Follow-up PRs will verify the test results and expand the tests. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Allow setting binarypath from MakefileAshley Cui2022-02-28
|/ | | | | | | | | | Packagers for other distributions and package managers may put their helper binaries in other location prefixes. Add HELPER_BINARIES_DIR to the makefile so packagers can set the prefix when building Podman. HELPER_BINARIES_DIR will be set at link-time. Example usage: make podman-remote HELPER_BINARIES_DIR=/my/location/prefix Signed-off-by: Ashley Cui <acui@redhat.com>
* Load ip_tables modules at bootPaul Holzinger2022-02-23
| | | | | | | | | | | | | | | | | | Rootless users cannot load the ip_tables module, in fedora 36 this module is no longer loaded by default so we have to add it manually. This is needed because rootless network setup tries to use iptables and if iptables-legacy is used instead of iptables-nft it will fail. To provide a better user experience we will load the module at boot. Note that this is not needed for RHEL because iptables-legacy is not supported on RHEL 8 and newer. [NO NEW TESTS NEEDED] Fixes #12661 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Initial implementation of mac forwarding using a privileged docker sock ↵Jason T. Greene2022-02-16
| | | | | | claim helper Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
* netavark e2e testsBrent Baude2022-02-02
| | | | | | enabled e2e tests for netavark Signed-off-by: Brent Baude <bbaude@redhat.com>
* Makefile: install targets independent of buildLokesh Mandvekar2022-01-25
| | | | | | | | | | | | | | Building from source would involve separate `make` and `make install` steps. This removes a lot of unnecessary `-nobuild` targets which were otherwise needed for packaging. This commit also removes spec files for unused copr jobs. [NO NEW TESTS NEEDED] Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Run codespell on codeDaniel J Walsh2022-01-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Engine.Remote from containers.confJhon Honce2022-01-20
| | | | | | | | | | | | | | | Heuristic to initialize TunnelMode/remote podman: - Podman built with remote tag - Podman running on darwin or windows GOOS - CONTAINER_HOST or CONTAINER_CONNECTION set in environment - --remote flag given on command line - From containers.conf, Engine.Remote == true and GOOS == linux Otherwise, podman will run in ABIMode/linked against libpod library. Fixes #12866 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Implement API forwarding for podman machine on WindowsJason T. Greene2022-01-19
| | | | Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Switch to a new installer approach using a path manipulation helperJason T. Greene2021-12-23
| | | | | | | | | | | | Fixes #11089 - cleanup PATH on MSI uninstall Additionally fixes scenarios where the path can be overwritten by setx Also removes the console flash, since the helper is built as a silent gui Helper executable can be rerun by user to repair PATHs broken by other tools Utilizes executable location instead of passed parameters to remove delicate escaping requirements [NO NEW TESTS NEEDED] Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
* compat API: allow enforcing short-names resolution to Docker HubValentin Rothberg2021-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Docker-compatible REST API has historically behaved just as the rest of Podman and Buildah (and the atomic Docker in older RHEL/Fedora) where `containers-registries.conf` is centrally controlling which registries a short name may resolve to during pull or local image lookups. Please refer to a blog for more details [1]. Docker, however, is only resolving short names to docker.io which has been reported (see #12320) to break certain clients who rely on this behavior. In order to support this scenario, `containers.conf(5)` received a new option to control whether Podman's compat API resolves to docker.io only or behaves as before. Most endpoints allow for directly normalizing parameters that represent an image. If set in containers.conf, Podman will then normalize the references directly to docker.io. The build endpoint is an outlier since images are also referenced in Dockerfiles. The Buildah API, however, supports specifying a custom `types.SystemContext` in which we can set a field that enforces short-name resolution to docker.io in `c/image/pkg/shortnames`. Notice that this a "hybrid" approach of doing the normalization directly in the compat endpoints *and* in `pkg/shortnames` by passing a system context. Doing such a hybrid approach is neccessary since the compat and the libpod endpoints share the same `libimage.Runtime` which makes a global enforcement via the `libimage.Runtime.systemContext` impossible. Having two separate runtimes for the compat and the libpod endpoints seems risky and not generally applicable to all endpoints. [1] https://www.redhat.com/sysadmin/container-image-short-names Fixes: #12320 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Minor Makefile fixChris Evich2021-11-18
| | | | Signed-off-by: Chris Evich <cevich@redhat.com>
* Revert "add kubernetes pause"Valentin Rothberg2021-11-15
| | | | | | | | This reverts commit 9d2b8d2791c23b83b6155b046099a83483860c56 since catatonit's new pause functionality can replace the `pause` binary entirely. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Match .c files in MakefileIan Wienand2021-11-09
| | | | | | | Ensure that rebuilds happen when .c files are updated in the source tree. Signed-off-by: Ian Wienand <iwienand@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-19 14:15:09 +0000