summaryrefslogtreecommitdiff
path: root/cmd/podman/common/specgen.go
Commit message (Collapse)AuthorAge
* run, create: add new security-opt proc-optsGiuseppe Scrivano2020-08-12
| | | | | | | it allows to customize the options passed down to the OCI runtime for setting up the /proc mount. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Do not use image CMD if user gave ENTRYPOINTMatthew Heon2020-08-10
| | | | | | | | | | | | | | | | This matches Docker behavior, and seems to make sense - the CMD may have been specific to the original entrypoint and probably does not make sense if it was changed. While we're in here, greatly simplify the logic for populating the SpecGen's Command. We create the full command when making the OCI spec, so the client should not be doing any more than setting it to the Command the user passed in, and completely ignoring ENTRYPOINT. Fixes #7115 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Specifying --ipc=host --pid=host is brokenDaniel J Walsh2020-07-28
| | | | | | | | For some reason we were overwriting memory when handling both --pid=host and --ipc=host. Simplified the code to handle this correctly, and add test to make sure it does not happen again. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Support default profile for apparmorDaniel J Walsh2020-07-22
| | | | | | | | | | | | | | Currently you can not apply an ApparmorProfile if you specify --privileged. This patch will allow both to be specified simultaniosly. By default Apparmor should be disabled if the user specifies --privileged, but if the user specifies --security apparmor:PROFILE, with --privileged, we should do both. Added e2e run_apparmor_test.go Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --umask flag for create, runAshley Cui2020-07-21
| | | | | | | | --umask sets the umask inside the container Defaults to 0022 Co-authored-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Ashley Cui <acui@redhat.com>
* Add support for overlay volume mounts in podman.Qi Wang2020-07-20
| | | | | | | | Add support -v for overlay volume mounts in podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Qi Wang <qiwan@redhat.com>
* libpod: pass down network optionsGiuseppe Scrivano2020-07-16
| | | | | | do not pass network specific options through the network namespace. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Fix handling of entrypointDaniel J Walsh2020-07-14
| | | | | | | If a user specifies an entrypoint of "" then we should not use the images entrypoint. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #6842 from rhatdan/pids-limitOpenShift Merge Robot2020-07-13
|\ | | | | Pids-limit should only be set if the user set it
| * Pids-limit should only be set if the user set itDaniel J Walsh2020-07-10
| | | | | | | | | | | | | | | | | | | | Currently we are sending over pids-limits from the user even if they never modified the defaults. The pids limit should be set at the server side unless modified by the user. This issue has led to failures on systems that were running with cgroups V1. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #6896 from mheon/fix_remote_createcommandOpenShift Merge Robot2020-07-13
|\ \ | | | | | | Fix container and pod create commands for remote create
| * | Fix container and pod create commands for remote createMatthew Heon2020-07-10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In `podman inspect` output for containers and pods, we include the command that was used to create the container. This is also used by `podman generate systemd --new` to generate unit files. With remote podman, the generated create commands were incorrect since we sourced directly from os.Args on the server side, which was guaranteed to be `podman system service` (or some variant thereof). The solution is to pass the command along in the Specgen or PodSpecgen, where we can source it from the client's os.Args. This will still be VERY iffy for mixed local/remote use (doing a `podman --remote run ...` on a remote client then a `podman generate systemd --new` on the server on the same container will not work, because the `--remote` flag will slip in) but at the very least the output of `podman inspect` will be correct. We can look into properly handling `--remote` (parsing it out would be a little iffy) in a future PR. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* / Don't setup AppArmor provile for privileged podsRalf Haferkamp2020-07-10
|/ | | | | | This is essentially db218e7162c2 forward-ported to specgen Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
* Add username to /etc/passwd inside of container if --userns keep-idDaniel J Walsh2020-07-07
| | | | | | | | | | If I enter a continer with --userns keep-id, my UID will be present inside of the container, but most likely my user will not be defined. This patch will take information about the user and stick it into the container. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Implement --sdnotify cmdline option to control sd-notify behaviorJoseph Gooch2020-07-06
| | | | | | | | | | | | | | | | | | | --sdnotify container|conmon|ignore With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI runtime doesn't pass it into the container. We also advertise "ready" when the OCI runtime finishes to advertise the service as ready. With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI runtime passes it into the container for initialization, and let the container advertise further metadata. This is the default, which is closest to the behavior podman has done in the past. The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor any child processes will talk to systemd. This removes the need for hardcoded CID and PID files in the command line, and the PIDFile directive, as the pid is advertised directly through sd-notify. Signed-off-by: Joseph Gooch <mrwizard@dok.org>
* Merge pull request #6836 from ashley-cui/tzlibpodOpenShift Merge Robot2020-07-06
|\ | | | | Add --tz flag to create, run
| * Add --tz flag to create, runAshley Cui2020-07-02
| | | | | | | | | | | | | | --tz flag sets timezone inside container Can be set to IANA timezone as well as `local` to match host machine Signed-off-by: Ashley Cui <acui@redhat.com>
* | move go module to v2Valentin Rothberg2020-07-06
|/ | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #6752 from rhatdan/inspectOpenShift Merge Robot2020-06-24
|\ | | | | Fix inspect to display multiple label: changes
| * Fix inspect to display multiple label: changesDaniel J Walsh2020-06-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the user runs a container like podman run --security-opt seccomp=unconfined --security-opt label=type:spc_t --security-opt label=level:s0 ... Podman inspect was only showing the second option This change will show "SecurityOpt": [ "label=type:spc_t,label=level:s0:c60", "seccomp=unconfined" ], Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Set stop signal to 15 when not explicitly setMatthew Heon2020-06-24
|/ | | | | | | | | | | | | | | | When going through the output of `podman inspect` to try and identify another issue, I noticed that Podman 2.0 was setting StopSignal to 0 on containers by default. After chasing it through the command line and SpecGen, I determined that we were actually not setting a default in Libpod, which is strange because I swear we used to do that. I re-added the disappeared default and now all is well again. Also, while I was looking for the bug in SpecGen, I found a bunch of TODOs that have already been done. Eliminate the comments for these. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add --preservefds to podman runQi Wang2020-06-19
| | | | | | Add --preservefds to podman run. close https://github.com/containers/libpod/issues/6458 Signed-off-by: Qi Wang <qiwan@redhat.com>
* Merge pull request #6636 from mheon/add_warningsOpenShift Merge Robot2020-06-17
|\ | | | | Re-add resource limit warnings to Specgen
| * Re-add resource limit warnings to SpecgenMatthew Heon2020-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These were part of Podman v1.9, but were lost in the transition to using Specgen to create containers. Most resource limits are checked via the sysinfo package to ensure they are safe to use (the cgroup is mounted, kernel support is present, etc) and removed if not safe. Further, bounds checks are performed to ensure that values are valid. Ensure these warnings are printed client-side when they occur. This part is a little bit gross, as it happens in pkg/infra and not cmd/podman, which is largely down to how we implemented `podman run` - all the work is done in pkg/infra and it returns only once the container has exited, and we need warnings to print *before* the container runs. The solution here, while inelegant, avoid the need to extensively refactor our handling of run. Should fix blkio-limit warnings that were identified by the FCOS test suite. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #6583 from mheon/inspect_ctr_before_imgOpenShift Merge Robot2020-06-17
|\ \ | | | | | | Fix podman inspect on overlapping/missing objects
| * | Fix podman inspect on overlapping/missing objectsMatthew Heon2020-06-16
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This started as a small fix to `podman inspect` where a container and image, with the same name/tag, were present, and `podman inspect` was run on that name. `podman inspect` in 1.9 (and `docker inspect`) will give you the container; in v2.0, we gave the image. This was an easy fix (just reorder how we check for image/container). Unfortunately, in the process of testing this fix, I determined that we regressed in a different area. When you run inspect on a number of containers, some of which do not exist, `podman inspect` should return an array of inspect results for the objects that exist, then print a number of errors, one for each object that could not be found. We were bailing after the first error, and not printing output for the containers that succeeded. (For reference, this applied to images as well). This required a much more substantial set of changes to properly handle - signatures for the inspect functions in ContainerEngine and ImageEngine, plus the implementations of these interfaces, plus the actual inspect frontend code needed to be adjusted to use this. Fixes #6556 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* / Fix --init and --init-pathJoseph Gooch2020-06-16
|/ | | | | | | Init properly passed into specgen Allow --init with --systemd=true but not --systemd=always. Signed-off-by: Joseph Gooch <mrwizard@dok.org>
* Turn on More lintersDaniel J Walsh2020-06-15
| | | | | | | | | - misspell - prealloc - unparam - nakedret Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Do not default WorkingDir to / on client sideDaniel J Walsh2020-06-12
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* container-{create,run}: add `--pod-id-file`Valentin Rothberg2020-06-11
| | | | | | | | Allow containers to join an existing pod via the `--pod-id-file` which is already supported by a number of `podman-pod` subcommands. Also add tests to make sure it's working and to prevent future regressions. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fixup issues found by golintDaniel J Walsh2020-06-10
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix handling of systemd.Daniel J Walsh2020-06-05
| | | | | | | | | | Systemd enablement has to happen on the server side, since we need check if the image is running systemd. Also need to make sure user setting the StopSignal is not overriden on the server side. But if not set and using systemd, we set it correctly. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* rootless: do not set pids limits with cgroupfsGiuseppe Scrivano2020-05-12
| | | | | | and enable events tests. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add remaining annotations for `podman inspect`Matthew Heon2020-05-08
| | | | | | This should finish support for `podman inspect` in APIv2. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* set --conmon-pidfileValentin Rothberg2020-05-08
| | | | | | | The --conmon-pidfile was not set in the spec leading to failing systemd units. Also add a system test to prevent future regressions. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podman: split env variables in env and overridesGiuseppe Scrivano2020-05-07
| | | | | | | | | | | | | | There are three different priorities for applying env variables: 1) environment/config file environment variables 2) image's config 3) user overrides (--env) The third kind are known to the client, while the default config and image's config is handled by the backend. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* add {generate,play} kubeValentin Rothberg2020-05-06
| | | | | | | | | | | | | | | | | | | Add the `podman generate kube` and `podman play kube` command. The code has largely been copied from Podman v1 but restructured to not leak the K8s core API into the (remote) client. Both commands are added in the same commit to allow for enabling the tests at the same time. Move some exports from `cmd/podman/common` to the appropriate places in the backend to avoid circular dependencies. Move definitions of label annotations to `libpod/define` and set the security-opt labels in the frontend to make kube tests pass. Implement rest endpoints, bindings and the tunnel interface. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add small fixes for 'podman run' from diffing inspectMatthew Heon2020-05-05
| | | | | | | | | | | | | | | | | | | | | | | | To try and identify differences between Podman v1.9 and master, I ran a series of `podman run` commands with various flags through each, then inspecting the resulting containers and diffed the inspect JSON between each. This identified a number of issues which are fixed in this PR. In order of discovery: - Podman v2 gave short names for images, where Podman v1 gave the fully-qualified name. Simple enough fix (get image tags and use the first one if they're available) - The --restart flag was not being parsed correctly when a number of retries was specified. Parsing has been corrected. - The -m flag was not setting the swap limit (simple fix to set swap in that case if it's not explicitly set by the user) - The --cpus flag was completely nonfunctional (wired in its logic) Tests have been added for all of these to catch future regressions. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Rework port parsing to support --expose and -PMatthew Heon2020-05-04
| | | | | | | | | | | | | | | | | | | | | As part of this, make a major change to the type we use to represent port mappings in SpecGen (from using existing OCICNI structs to using our own custom one). This struct has the advantage of supporting ranges, massively reducing traffic over the wire for Podman commands using them (for example, the `podman run -p 5000-6000` command will now send only one struct instead of 1000). This struct also allows us to easily validate which ports are in use, and which are not, which is necessary for --expose. Once we have parsed the ports from the new struct, we can produce an accurate map including all currently requested ports, and use that to determine what ports need to be exposed (some requested exposed ports may already be included in a mapping from --publish and will be ignored) and what open ports on the host we can map them to. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #6057 from baude/v2networkingOpenShift Merge Robot2020-05-01
|\ | | | | v2networking enable commands
| * add provided cni networks to spec genbaude2020-05-01
| | | | | | | | | | | | enable final integration tests for networking. Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #6016 from giuseppe/fix-createOpenShift Merge Robot2020-05-01
|\ \ | |/ |/| v2, podman: fix create and entrypoint tests
| * cmd, podman: do not override entrypoint if unsetGiuseppe Scrivano2020-04-30
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | V2 enable ps testsJhon Honce2020-04-29
|/ | | | | | | | * Combine cobra.Command helper functions into validate package from registry and common packages * Introduce ChoiceValue for flags Signed-off-by: Jhon Honce <jhonce@redhat.com>
* specgen: remove dead codeGiuseppe Scrivano2020-04-28
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #6000 from mheon/volume_backend_flagsOpenShift Merge Robot2020-04-27
|\ | | | | Add support for volumes-from, image volumes, init
| * Add support for volumes-from, image volumes, initMatthew Heon2020-04-27
| | | | | | | | | | | | | | | | | | | | | | This should complete Podmanv2's support for volume-related flags. Most code was sourced from the old pkg/spec implementation with modifications to account for the split between frontend flags (volume, mount, tmpfs) and the backend flags implemented here. Also enables tests for podman run with volumes Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Make podman container list == podman psDaniel J Walsh2020-04-27
|/ | | | | | | | | | Also make podman create -p PUBLISHPorts work. This PR fixes ps_test.go Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #5994 from giuseppe/fix-healthchecksOpenShift Merge Robot2020-04-27
|\ | | | | v2, podman: fix healthchecks
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-06 19:35:44 +0000