summaryrefslogtreecommitdiff
path: root/cmd/podman/create.go
Commit message (Collapse)AuthorAge
* podman-remote create|runbaude2019-04-08
| | | | | | | | | | | | | | add the ability to create and run containers via the podman-remote client. we now create an intermediate layer from the the create/run cli flags. the intermediate layer can be converted into a createconfig or into a varlink struct. Once transported, the varlink struct can be converted back to an intermediate layer and then to a createconfig. remote terminals are not supported yet. Signed-off-by: baude <bbaude@redhat.com>
* rootless: remove SkipStorageSetup()Giuseppe Scrivano2019-04-01
| | | | | | | | in the few places where we care about skipping the storage initialization, we can simply use the process effective UID, instead of relying on a global boolean flag. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* preparation for remote-client create containerbaude2019-03-11
| | | | | | | | | to prepare for being able to remotely run a container, we need to perform a refactor to get code out of main because it is not reusable. the shared location is a good starting spot though eventually some will likely end up in pkg/spec/ at some point. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2569 from giuseppe/rootless-fix-exec-with-userOpenShift Merge Robot2019-03-08
|\ | | | | rootless: exec join the user+mount namespace
| * create: join also the mount ns of the dependencyGiuseppe Scrivano2019-03-07
| | | | | | | | | | | | | | | | | | when we are creating a container that depends on another one, be sure we also join its mount namespace in addition to the user namespace. Closes: https://github.com/containers/libpod/issues/2556 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | label parsing in non-quoted fieldbaude2019-03-08
| | | | | | | | | | | | | | | | | | switch from a stringslice to a stringarray for labels to handle quoted input. fixes issue #2574 Signed-off-by: baude <bbaude@redhat.com>
* | Fix help commands to show short and long description.Daniel J Walsh2019-03-07
|/ | | | | | Cleanup lots of help information to look good when displayed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman healthcheck run (phase 1)baude2019-03-05
| | | | | | | | | Add the ability to manually run a container's healthcheck command. This is only the first phase of implementing the healthcheck. Subsequent pull requests will deal with the exposing the results and history of healthchecks as well as the scheduling. Signed-off-by: baude <bbaude@redhat.com>
* exec: support --preserve-fdsGiuseppe Scrivano2019-03-02
| | | | | | | | Allow to pass additional FDs to the process being executed. Closes: https://github.com/containers/libpod/issues/2372 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #2476 from mheon/fix_stopOpenShift Merge Robot2019-02-28
|\ | | | | Fix ignored --stop-timeout flag to 'podman create'
| * Fix four errors tagged by Cobra macro debuggingMatthew Heon2019-02-27
| | | | | | | | | | | | | | | | Three flags are unimplemented (never implemented) One had an incorrect retrieval macro Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | podman create: disable interspersed optsEd Santiago2019-02-27
|/ | | | | | | | | | | | | With the change to cobra, the following command fails: # podman create alpine sh -c /bin/true Error: unknown shorthand flag: 'c' in -c (Correct behavior is to pass '-c' to the container command) This PR corrects that. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Better usage synopses for subcommandsEd Santiago2019-02-26
| | | | | | | Conceptually simple: include, where applicable, a brief description of command-line options for each subcommand. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Allow dns settings with --net=hostDaniel J Walsh2019-02-23
| | | | | | | | This seems to be a needless restriction. We make a copy of the hosts /etc/resolv.conf file, so these changes to not modify the host. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Ensure that userns is created for stopped rootless podsMatthew Heon2019-02-19
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* OpenTracing support added to start, stop, run, create, pull, and psSebastian Jug2019-02-18
| | | | | | Drop context.Context field from cli.Context Signed-off-by: Sebastian Jug <sejug@redhat.com>
* Merge pull request #2335 from mheon/enable_detach_rmOpenShift Merge Robot2019-02-15
|\ | | | | Enable --rm with --detach
| * Enable --rm with --detachMatthew Heon2019-02-14
| | | | | | | | | | | | | | We can now safely remove detached containers as --rm handling has moved into the cleanup process. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Merge pull request #2333 from TomSweeneyRedHat/dev/tsweeney/helpexamplesOpenShift Merge Robot2019-02-15
|\ \ | |/ |/| Add examples for Cobra
| * Add examples for CobraTomSweeneyRedHat2019-02-14
| | | | | | | | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> First pass of entries for the Examples listed in the Cobra Help. Will add others in following PR's.
* | Fix volume handling in podmanDaniel J Walsh2019-02-14
|/ | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Don't show global flags except for podman commandDaniel J Walsh2019-02-12
| | | | | | | | | Subcommands should not be showing the global flags. This causes the important information to scroll off the screen. Also fixed a typo on runCommmand (Too many 'm's) Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Separate remote and local commandsbaude2019-02-11
| | | | | | | | In the previous CLI, we had an accurate depiction of commands available for the remote client and those available for the local client. Signed-off-by: baude <bbaude@redhat.com>
* Migrate to cobra CLIbaude2019-02-08
| | | | | | | | We intend to migrate to the cobra cli from urfave/cli because the project is more well maintained. There are also some technical reasons as well which extend into our remote client work. Signed-off-by: baude <bbaude@redhat.com>
* Changes to container runlabel for toolbox projectbaude2019-01-30
| | | | | | | | | | The toolbox project would benefit from a few changes to more closely resembe the original atomic cli project. Changes made are: * only pull image for container runlabel if the label exists in the image * if a container image does not have the desired label, exit with non-zero Signed-off-by: baude <bbaude@redhat.com>
* Make --quiet work in podman create/runDaniel J Walsh2019-01-29
| | | | | | | | | The --queit option is supposed to suppress the pulling messages when a new image is being pulled down. This patch fixes this issue. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Vendor in latest opencontainers/selinuxDaniel J Walsh2019-01-18
| | | | | | | | | | | This will now verify labels passed in by the user. Will also prevent users from accidently relabeling their homedir. podman run -ti -v ~/home/user:Z fedora sh Is not a good idea. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #2145 from baude/playcontainerintopodOpenShift Merge Robot2019-01-12
|\ | | | | podman play kube: add containers to pod
| * podman play kube: add containers to podbaude2019-01-11
| | | | | | | | | | | | | | | | | | when defining containers, we missed the conditional logic to allow the container to be defined with "WithPod" and so forth. I had to slightly modify the createcontainer process to pass a libpod.Pod that could override things; use nil as no pod. Signed-off-by: baude <bbaude@redhat.com>
* | rootless: create the userns immediately when creating a new podGiuseppe Scrivano2019-01-11
| | | | | | | | | | | | Closes: https://github.com/containers/libpod/issues/2124 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | rootless: join both userns and mount namespace with --podGiuseppe Scrivano2019-01-11
|/ | | | | | | When --pod is specified then join both the user and mount namespace for the pod so we can initialize the storage. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* apparmor: apply default profile at container initializationValentin Rothberg2019-01-09
| | | | | | | | | | | | | | | | | | | Apply the default AppArmor profile at container initialization to cover all possible code paths (i.e., podman-{start,run}) before executing the runtime. This allows moving most of the logic into pkg/apparmor. Also make the loading and application of the default AppArmor profile versio-indepenent by checking for the `libpod-default-` prefix and over-writing the profile in the run-time spec if needed. The intitial run-time spec of the container differs a bit from the applied one when having started the container, which results in displaying a potentially outdated AppArmor profile when inspecting a container. To fix that, load the container config from the file system if present and use it to display the data. Fixes: #2107 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* add container-init supportValentin Rothberg2019-01-04
| | | | | | | | | | | | | | | | | | | Add support for executing an init binary as PID 1 in a container to forward signals and reap processes. When the `--init` flag is set for podman-create or podman-run, the init binary is bind-mounted to `/dev/init` in the container and "/dev/init --" is prepended to the container's command. The default base path of the container-init binary is `/usr/libexec/podman` while the default binary is catatonit [1]. This default can be changed permanently via the `init_path` field in the `libpod.conf` configuration file (which is recommended for packaging) or temporarily via the `--init-path` flag of podman-create and podman-run. [1] https://github.com/openSUSE/catatonit Fixes: #1670 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Switch all referencs to image.ContainerConfig to image.ConfigDaniel J Walsh2018-12-21
| | | | | | This will more closely match what Docker is doing. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Change all 'can not' to 'cannot' for proper usageDaniel J Walsh2018-12-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add Playbaude2018-12-19
| | | | | | | podman play kube adds the ability for the user to recreate pods and containers from a Kubernetes YAML file in libpod. Signed-off-by: baude <bbaude@redhat.com>
* Add information on --restartDaniel J Walsh2018-12-18
| | | | | | | We need to recommend that users use Systemd unit files if they want the container to restart automatically. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove the forceSecure parameter on the pull call stackMiloslav Trmač2018-12-06
| | | | | | | DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool can now represent that value, so forceSecure is redundant. Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* Merge pull request #1918 from mheon/use_db_pathsOpenShift Merge Robot2018-12-05
|\ | | | | Use paths written in DB instead if they differ from our defaults
| * Move rootless storage config into libpodMatthew Heon2018-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Previous commits ensured that we would use database-configured paths if not explicitly overridden. However, our runtime generation did unconditionally override storage config, which made this useless. Move rootless storage configuration setup to libpod, and change storage setup so we only override if a setting is explicitly set, so we can still override what we want. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | create pod on the flybaude2018-12-03
|/ | | | | | | | | | when a user specifies --pod to podman create|run, we should create that pod automatically. the port bindings from the container are then inherited by the infra container. this signicantly improves the workflow of running containers inside pods with podman. the user is still encouraged to use podman pod create to have more granular control of the pod create options. Signed-off-by: baude <bbaude@redhat.com>
* libpod should know if the network is disabledDaniel J Walsh2018-11-13
| | | | | | | | | | | | | | | | | /etc/resolv.conf and /etc/hosts should not be created and mounted when the network is disabled. We should not be calling the network setup and cleanup functions when it is disabled either. In doing this patch, I found that all of the bind mounts were particular to Linux along with the generate functions, so I moved them to container_internal_linux.go Since we are checking if we are using a network namespace, we need to check after the network namespaces has been created in the spec. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* create: fix writing cidfile when using rootlessGiuseppe Scrivano2018-10-23
| | | | | | | | | | prevent opening the same file twice, since we re-exec podman in rootless mode. While at it, also solve a possible race between the check for the file and writing to it. Another process could have created the file in the meanwhile and we would just end up overwriting it. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #1605 from mheon/syslog_cleanupOpenShift Merge Robot2018-10-11
|\ | | | | Pass along syslog variable to podman cleanup processes
| * Pass along syslog variable to podman cleanup processesMatthew Heon2018-10-11
| | | | | | | | | | | | | | | | | | As of now, there is no way to debug podman clean up processes. They are started by conmon with no stdout/stderr and log nowhere. This allows us to actually figure out what is going on when a cleanup process runs. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* | Sort all command flagsQi Wang2018-10-11
|/ | | | Signed-off-by: Qi Wang <qiwan@redhat.com>
* Disable SELinux labeling if --privilegedDaniel J Walsh2018-10-02
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --mount option for `create` & `run` commandDaniel J Walsh2018-09-21
| | | | | | | | Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1524 Approved by: mheon
* Don't mount /dev/shm if the user told you --ipc=noneDaniel J Walsh2018-09-21
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1466 Approved by: mheon
* rootless: fix create with images not in the storageGiuseppe Scrivano2018-09-21
| | | | | | | | | | | | This chunk was mistakenly removed with ecec1a5430885baf96d2e3d6153c7454c41a4617 Introduce it back as it solves the pull of an image that is not yet in the storage when using create/run. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #1521 Approved by: baude