aboutsummaryrefslogtreecommitdiff
path: root/cmd/podman/main.go
Commit message (Collapse)AuthorAge
* [Techinal Debt] Cleanup ABI vs. Tunnel CLI commandsJhon Honce2021-05-27
| | | | | | | | | | | | | | | | | | [NO TESTS NEEDED] This commit cleans up two issues: * Most commands support all EngineModes so default to that. Let outlayers declare their intent. * Use cobra.Annotations to set supported EngineMode. This simplies instantiating commands as there is now one method to communicate a commands requirements rather than two. * Combined aliased commands into one file * Fixed aliased commands where Args field did not match * Updated examples in README.md for writing commands * Remove redundant flag DisableFlagsInUseLine in cobra.Command initialization. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Podman machine CLI and interface stubAshley Cui2021-03-25
| | | | | | | | | | Podman machine will be a mac-only command that manages the VM where containers are run. Currently, only the CLI is written and the interface function for the VM management is stub for future developement The podman machine cli is only built on mac builds. Signed-off-by: Ashley Cui <acui@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* Allow users to specify TMPDIR in containers.confDaniel J Walsh2020-12-15
| | | | | | | | | | | Currently we hard code TMPDIR environment variable to /var/tmp if it is not set in the Environment. This causes TMPDIR environment variable to be ignored if set in containers.conf. This change now uses the host environment TMPDIR, followed by containers.conf and then hard codes TMPDIR, if it was not set. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add shell completion with cobraPaul Holzinger2020-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow automatic generation for shell completion scripts with the internal cobra functions (requires v1.0.0+). This should replace the handwritten completion scripts and even adds support for fish. With this approach it is less likley that completions and code are out of sync. We can now create the scripts with - podman completion bash - podman completion zsh - podman completion fish To test the completion run: source <(podman completion bash) The same works for podman-remote and podman --remote and it will complete your remote containers/images with the correct endpoints values from --url/--connection. The completion logic is written in go and provided by the cobra library. The completion functions lives in `cmd/podman/completion/completion.go`. The unit test at cmd/podman/shell_completion_test.go checks if each command and flag has an autocompletion function set. This prevents that commands and flags have no shell completion set. This commit does not replace the current autocompletion scripts. Closes #6440 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Switch use of Flags to OptionsDaniel J Walsh2020-10-21
| | | | | | | | Want to have man pages match commands, since we have lots of printed man pages with using Options, we will change the command line to use Options in --help. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Cleanup handling of podman mount/unmountDaniel J Walsh2020-07-27
| | | | | | | | | | | We should default to the user name unmount rather then the internal name of umount. Also User namespace was not being handled correctly. We want to inform the user that if they do a mount when in rootless mode that they have to be first in the podman unshare state. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* [WIP] Refactor podman system connectionJhon Honce2020-07-22
| | | | | | | | | | | | * Add support to manage multiple connections * Add connection * Remove connection * Rename connection * Set connection as default * Add markdown/man pages * Fix recursion in hack/xref-helpmsgs-manpages Signed-off-by: Jhon Honce <jhonce@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Set TMPDIR to /var/tmp by default if not setDaniel J Walsh2020-06-30
| | | | | | | | | Containers/image will use TMPDIR for the location of pulled layer blobs. If TMPDIR is not set, it will use /tmp. Since this is known to be of limited space on most systems, we change the default to /var/tmp if the user has not told the tools where to store temporary files. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Set console mode for windowsBrent Baude2020-06-29
| | | | | | Windows terminal handling is different than darwin and linux. It needs to have the terminal mode set to enable virtual terminal processing. This allows colors and other things to work. Signed-off-by: Brent Baude <bbaude@redhat.com>
* V2 podman system connectionJhon Honce2020-06-23
| | | | | | | | | * Implement command * Refactor podman-remote to pull from containers.conf by default * podman-remote defaults to --remote being true * Write podman-system-connection.1.md Signed-off-by: Jhon Honce <jhonce@redhat.com>
* add {generate,play} kubeValentin Rothberg2020-05-06
| | | | | | | | | | | | | | | | | | | Add the `podman generate kube` and `podman play kube` command. The code has largely been copied from Podman v1 but restructured to not leak the K8s core API into the (remote) client. Both commands are added in the same commit to allow for enabling the tests at the same time. Move some exports from `cmd/podman/common` to the appropriate places in the backend to avoid circular dependencies. Move definitions of label annotations to `libpod/define` and set the security-opt labels in the frontend to make kube tests pass. Implement rest endpoints, bindings and the tunnel interface. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* v2networking enable commandsbaude2020-04-30
| | | | | | Enable the networking commands for v2. Signed-off-by: baude <bbaude@redhat.com>
* V2 Commands that require ParentNS (rootful) are report errorJhon Honce2020-04-30
| | | | | | * Updated unmount to require ParentNS Signed-off-by: Jhon Honce <jhonce@redhat.com>
* generate systemdValentin Rothberg2020-04-29
| | | | | | | Implement `podman generate systemd` for Podman v2 and enable associated tests. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* system tests must passBrent Baude2020-04-28
| | | | Signed-off-by: Brent Baude <bbaude@redhat.com>
* manifest create,add,inspectQi Wang2020-04-22
| | | | | | Implememts manifest subcommands create, add, inspect. Signed-off-by: Qi Wang <qiwan@redhat.com>
* Fix bug where two configurations had been createdJhon Honce2020-04-16
| | | | | | * registry.PodmanConfig() new returns a pointer to the source of truth Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Podman V2 birthBrent Baude2020-04-16
| | | | | | remote podman v1 and replace with podman v2. Signed-off-by: Brent Baude <bbaude@redhat.com>
* V2 podman system serviceJhon Honce2020-04-07
| | | | | | | | | | | | | | | * Added support for system service * Enabled linting on the varlinkapi source, needed to support V2 service command * Added support for PODMAN_SOCKET Skip linting deprecated code Rather than introduce bugs by correcting deprecated code, linting the code is being skipped. Code that is being ported into V2 is being checked. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add support for containers.confDaniel J Walsh2020-03-27
| | | | | | | vendor in c/common config pkg for containers.conf Signed-off-by: Qi Wang qiwan@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* add default network for apiv2 createBrent Baude2020-03-06
| | | | | | | | | | | | | during container creation, if no network is provided, we need to add a default value so the container can be later started. use apiv2 container creation for RunTopContainer instead of an exec to the system podman. RunTopContainer now also returns the container id and an error. added a libpod commit endpoint. also, changed the use of the connections and bindings slightly to make it more convenient to write tests. Fixes: 5366 Signed-off-by: Brent Baude <bbaude@redhat.com>
* build: move initialization after SetXdgDirsGiuseppe Scrivano2020-02-24
| | | | | | | | | | | | | | otherwise it triggers the config file initialization from vendor/github.com/containers/common/pkg/config before the init() in main.go can set correctly XDG_RUNTIME_DIR and DBUS_SESSION_BUS_ADDRESS when they are missing. commit 96de762eedd1470dfbe73cf424eea848589268d7 introduced the regression. Closes: https://github.com/containers/libpod/issues/5314 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* make lint: enable gocriticValentin Rothberg2020-01-13
| | | | | | | `gocritic` is a powerful linter that helps in preventing certain kinds of errors as well as enforcing a coding style. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add `untag` sub-commandSascha Grunert2020-01-08
| | | | | | | | Podman now supports untagging images via the `untag` sub-command for the root and `image` commands. Testing and documentation has been added as well. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* Merge pull request #4127 from nalind/reexec-useOpenShift Merge Robot2019-09-27
|\ | | | | Correct use of reexec.Init()
| * Correct use of reexec.Init()Nalin Dahyabhai2019-09-26
| | | | | | | | | | | | | | A true result from reexec.Init() isn't an error, but it indicates that main() should exit with a success exit status. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* | Set log-level immediately, before rootless setupMatthew Heon2019-09-26
|/ | | | | | | | | | | | If we don't do this, we print WARN level messages that we should not be printing by default. Up one WARN message to ERROR so it still shows up by default. Fixes: #4115 Fixes: #4012 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* support non-standard ssh port for remote-clientbaude2019-09-17
| | | | | | | | | | when using the remote client, users may need to specify a non-standard port for ssh connections. we can do so on the command line and within the remote-client configuration file. Fixes: #3987 Signed-off-by: baude <bbaude@redhat.com>
* Use exit code constantsDaniel J Walsh2019-09-12
| | | | | | | We have leaked the exit number codess all over the code, this patch removes the numbers to constants. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Set TMPDIR to /var/tmp by defaultDaniel J Walsh2019-09-05
| | | | | | | | | | | | | We have had some issues with users squashing large images or pulling large content from github, that could trigger crashes based on the size of /tmp. Docker had an issue with this back in 2016. https://github.com/golang/go/issues/14021 The discussion there was to change the default to /var/tmp. This change will only effect systems that do not set the TMPDIR environment variable. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #3466 from TomSweeneyRedHat/dev/tsweeney/myhomeOpenShift Merge Robot2019-08-06
|\ | | | | Touch up XDG, add rootless links
| * Touch up XDG, add rootless linksTomSweeneyRedHat2019-07-29
| | | | | | | | | | | | | | | | | | | | | | Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number of man pages. Make use of the XDG_CONFIG_HOME environment variable in a rootless environment if available, or set it if not. Also added a number of links to the Rootless Podman config page and added the location of the auth.json files to that doc. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* | fix `podman -v` regressionValentin Rothberg2019-07-29
|/ | | | | | | Re-add the shortflag for --version and add e2e tests to avoid regressing in the future. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Implement conmon execPeter Hunt2019-07-22
| | | | | | | | | | | | | | | | | | | | | | This includes: Implement exec -i and fix some typos in description of -i docs pass failed runtime status to caller Add resize handling for a terminal connection Customize exec systemd-cgroup slice fix healthcheck fix top add --detach-keys Implement podman-remote exec (jhonce) * Cleanup some orphaned code (jhonce) adapt remote exec for conmon exec (pehunt) Fix healthcheck and exec to match docs Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error Use these different errors in branching for exit code in healthcheck and exec Set conmon to use new api version Signed-off-by: Jhon Honce <jhonce@redhat.com> Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Fix podman-remote usage message to display `podman-remote` instead of `podman`Ashley Cui2019-07-08
| | | | | | When the user uses remote client, the message prompts the user to use `podman-remote`. This does not apply for Mac usage. Signed-off-by: Ashley Cui <ashleycui16@gmail.com>
* Merge pull request #3451 from ashley-cui/unmountOpenShift Merge Robot2019-06-28
|\ | | | | Remove umount command from remote client.
| * Remove umount command from remote client.Ashley Cui2019-06-27
| | | | | | | | | | | | Since there is no mount command, it does not make sense to have umount. Signed-off-by: Ashley Cui <ashleycui16@gmail.com>
* | rootless: enable linger if /run/user/UID not existsGiuseppe Scrivano2019-06-27
|/ | | | | | | | | | | | | at least on Fedora 30 it creates the /run/user/UID directory for the user logged in via ssh. This needs to be done very early so that every other check when we create the default configuration file will point to the correct location. Closes: https://github.com/containers/libpod/issues/3410 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* libpod removal from main (phase 2)baude2019-06-27
| | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* Add remote client logging to a fileJhon Honce2019-06-17
| | | | | | | | | | Logging messages from the dependency libraries should not log onto the screen when using the remote client. This patch writes logging to ~/.config/containers/podman-remote.log Fixes #3299 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* When creating exit command, pass storage options onMatthew Heon2019-06-13
| | | | | | | | | | | | | | | | | We made changes earlier that empty storage options when setting storage driver explicitly. Unfortunately, this breaks rootless cleanup commands, as they lose the fuse-overlayfs mount program path. Fix this by passing along the storage options to the cleanup process. Also, fix --syslog, which was broken a while ago (probably when we broke up main to add main_remote). Fixes #3326 Signed-off-by: Matthew Heon <mheon@redhat.com>
* podman remote-client commitbaude2019-05-30
| | | | | | | add the ability to commit a container to an image using the remote client. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #3039 from mheon/podman_initOpenShift Merge Robot2019-05-02
|\ | | | | Add podman init command
| * Add basic structure of podman init commandMatthew Heon2019-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | As part of this, rework the number of workers used by various Podman tasks to match original behavior - need an explicit fallthrough in the switch statement for that block to work as expected. Also, trivial change to Podman cleanup to work on initialized containers - we need to reset to a different state after cleaning up the OCI runtime. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Merge pull request #3035 from baude/remoteportOpenShift Merge Robot2019-05-02
|\ \ | |/ |/| podman-remote port
| * podman-remote portbaude2019-05-01
| | | | | | | | | | | | | | add the port command to the remote client. this allows users to displa port information about their host system from the remote client Signed-off-by: baude <bbaude@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 04:32:25 +0000