summaryrefslogtreecommitdiff
path: root/cmd/podman/pod_create.go
Commit message (Collapse)AuthorAge
* Podman V2 birthBrent Baude2020-04-16
| | | | | | remote podman v1 and replace with podman v2. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add network options to podman pod createMatthew Heon2020-02-19
| | | | | | | | | | | | | | | | | Enables most of the network-related functionality from `podman run` in `podman pod create`. Custom CNI networks can be specified, host networking is supported, DNS options can be configured. Also enables host networking in `podman play kube`. Fixes #2808 Fixes #3837 Fixes #4432 Fixes #4718 Fixes #4770 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Rework label parsingMatthew Heon2020-02-14
| | | | | | | | | | | | | | | We attempted to share all logic for parsing labels and environment variables, which on the surface makes lots of sense (both are formatted key=value so parsing logic should be identical) but has begun to fall apart now that we have added additional logic to environment variable handling. Environment variables that are unset, for example, are looked up against environment variables set for the process. We don't want this for labels, so we have to split parsing logic. Fixes #3854 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* seperate container create network optionsBrent Baude2020-02-03
| | | | | | | | | | | | | | | | | | this pr splits off some of the network container create options into a different flag set. the options in question are: --add-host --dns --dns-opt --dns-search --ip --mac-address --network --no-hosts --publish in the future, these options are going to be added to the pod create flags. this makes that transition easier and provides for less code duplication. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Allow customizing pod hostnameChen Zhiwei2019-08-18
| | | | | | | * set hostname in pod yaml file * set --hostname in pod create command Signed-off-by: Chen Zhiwei <zhiweik@gmail.com>
* cmd: drop check for euid==0Giuseppe Scrivano2019-08-12
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* first pass of corrections for golangci-lintbaude2019-07-10
| | | | Signed-off-by: baude <bbaude@redhat.com>
* libpod removal from main (phase 2)baude2019-06-27
| | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* runtime: pass down the contextGiuseppe Scrivano2019-04-26
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Fix segfaults attribute to missing optionsbaude2019-04-15
| | | | | | | | | In cases where the remote client culls options to a command, we need to be sure that the lookup for that flag does not result in a nil pointer. To do so, we add a Remote attribute to the podman struct and then cli helper funcs are now aware they are remote. Signed-off-by: baude <bbaude@redhat.com>
* preparation for remote-client create containerbaude2019-03-11
| | | | | | | | | to prepare for being able to remotely run a container, we need to perform a refactor to get code out of main because it is not reusable. the shared location is a good starting spot though eventually some will likely end up in pkg/spec/ at some point. Signed-off-by: baude <bbaude@redhat.com>
* Fix help commands to show short and long description.Daniel J Walsh2019-03-07
| | | | | | Cleanup lots of help information to look good when displayed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Command-line input validation: reject unused argsEd Santiago2019-02-27
| | | | | | | | | | | | | | | Several podman commands accept no subcommands. Some of those were not actually checking, though, which could lead to user confusion. Added validation where missing; and, refactored to minimize duplication. (Side note: I decided against using cobra.NoArgs because its error message, "unknown command", misleadingly implies that there are known ones). Also added validation to varlink Signed-off-by: Ed Santiago <santiago@redhat.com>
* podman-remote create|psbaude2019-02-25
| | | | | | | enable the podman-remote client to be able to create and list pods on a remote system. Signed-off-by: baude <bbaude@redhat.com>
* Podman pod create now errors on receiving CLI argsMatthew Heon2019-02-19
| | | | | | | It has never accepted arguments, so we should error when passed args we will never use. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Don't show global flags except for podman commandDaniel J Walsh2019-02-12
| | | | | | | | | Subcommands should not be showing the global flags. This causes the important information to scroll off the screen. Also fixed a typo on runCommmand (Too many 'm's) Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* pod: drop not valid check for rootlessGiuseppe Scrivano2019-02-11
| | | | | | | rootless networks support port binding if the underlying slirp4netns is new enough. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Migrate to cobra CLIbaude2019-02-08
| | | | | | | | We intend to migrate to the cobra cli from urfave/cli because the project is more well maintained. There are also some technical reasons as well which extend into our remote client work. Signed-off-by: baude <bbaude@redhat.com>
* Clean up some existing varlink endpointsbaude2018-12-12
| | | | | | | | Going through and adding options (like tls-verify, signature option, etc) to some varlink endpoints (like push/pull) many of which had not been updated since their original authoring. Signed-off-by: baude <bbaude@redhat.com>
* Allow users to expose ports from the pod to the hostbaude2018-11-20
| | | | | | | | | | we need to allow users to expose ports to the host for the purposes of networking, like a webserver. the port exposure must be done at the time the pod is created. strictly speaking, the port exposure occurs on the infra container. Signed-off-by: baude <bbaude@redhat.com>
* create: fix writing cidfile when using rootlessGiuseppe Scrivano2018-10-23
| | | | | | | | | | prevent opening the same file twice, since we re-exec podman in rootless mode. While at it, also solve a possible race between the check for the file and writing to it. Another process could have created the file in the meanwhile and we would just end up overwriting it. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Sort all command flagsQi Wang2018-10-11
| | | | Signed-off-by: Qi Wang <qiwan@redhat.com>
* Fix pod sharing for utsmodeDaniel J Walsh2018-09-07
| | | | | | | | | | | | | We should be sharing cgroups namespace by default in pods uts namespace sharing was broken in pods. Create a new libpod/pkg/namespaces for handling of namespace fields in containers Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1418 Approved by: mheon
* pod create: restore help flagValentin Rothberg2018-08-31
| | | | | | | | | | It is not necessary to hide podman-pod-create's help flag. Therefore, partially revert commit 6751b2c35040 to restore the help flag. Signed-off-by: Valentin Rothberg <vrothberg@suse.com> Closes: #1379 Approved by: rhatdan
* don't print help message for usage errorsValentin Rothberg2018-08-31
| | | | | | | | | | | | | | | | | Don't print potentially verbose help messages in case of usage errors, but print only the usage error followed by a pointer to the command's help. This aligns with Docker. ``` $ podman run -h flag needs an argument: -h See 'podman run --help'. ``` Signed-off-by: Valentin Rothberg <vrothberg@suse.com> Closes: #1379 Approved by: rhatdan
* run/create: reserve `-h` flag for hostnameValentin Rothberg2018-08-30
| | | | | | | | | | | Move the `-h` short flag from `--help` to `--hostname` for podman-run, podman-create and podman-pod-create to be compatible with Docker. Fixes: #1367 Signed-off-by: Valentin Rothberg <vrothberg@suse.com> Closes: #1373 Approved by: rhatdan
* Fixing network ns segfaulthaircommander2018-08-23
| | | | | | | | | As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Change pause container to infra containerhaircommander2018-08-23
| | | | | | | Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Support pause containers in varlinkhaircommander2018-08-23
| | | | | | | Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* Added option to share kernel namespaces in libpod and podmanhaircommander2018-08-23
| | | | | | | | | A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* Cleanup descriptions and help informationDaniel J Walsh2018-07-27
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1167 Approved by: baude
* Added full podman pod ps, with tests and man pagehaircommander2018-07-13
| | | | Signed-off-by: haircommander <pehunt@redhat.com>
* Podman pod create/rm commands with man page and tests.haircommander2018-07-13
Includes a very stripped down version of podman pod ps, just for testing Signed-off-by: haircommander <pehunt@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 14:23:58 +0000