summaryrefslogtreecommitdiff
path: root/cmd/podman/pods
Commit message (Collapse)AuthorAge
* support advanced network configuration via cliPaul Holzinger2021-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | Rework the --network parse logic to support multiple networks with specific network configuration settings. --network can now be set multiple times. For bridge network mode the following options have been added: - **alias=name**: Add network-scoped alias for the container. - **ip=IPv4**: Specify a static ipv4 address for this container. - **ip=IPv6**: Specify a static ipv6 address for this container. - **mac=MAC**: Specify a static mac address address for this container. - **interface_name**: Specify a name for the created network interface inside the container. So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99 for the default bridge network as well as for network names. This is better than using --ip because we can set the ip per network without any confusion which network the ip address should be assigned to. The --ip, --mac-address and --network-alias options are still supported but --ip or --mac-address can only be set when only one network is set. This limitation already existed previously. The ability to specify a custom network interface name is new Fixes #11534 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Refactor podman pods to report.FormatterJhon Honce2021-12-06
| | | | | | | | | | | [NO NEW TESTS NEEDED] Support better compatibility output for podman pods commands See #10974 Depends on containers/common#831 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Refactor podman image command outputJhon Honce2021-12-02
| | | | | | | | | | | Leverage new report.Formatter allowing better compatibility from podman command output. Follow on PR's will cover containers, etc. See #10974 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* fix duplicated logs commandPaul Holzinger2021-11-18
| | | | | | | | | | Podman logs was defined twice, once for container logs and once for pod logs. This causes problems with the shell completion. Also podman --help showed this command twice. [NO NEW TESTS NEEDED] Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Enable 'podman run --memory-swappiness=0'Hironori Shiina2021-11-12
| | | | | | | | '--memory-swappiness=0' used to work. This patch fixes the regression issue, which was caused by the change of infra container creation process. Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
* pod create: read infra image from containers.confValentin Rothberg2021-11-10
| | | | | | | | | Fix a bug where pods would be created with the hard-coded default infra image instead of the custom one from containers.conf. Add a simple regression test. Fixes: #12245 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* pod create: read network mode from configPaul Holzinger2021-11-08
| | | | | | | | | When we create a pod we have to parse the network mode form the config file. This is a regression in commit d28e85741f. Fixes #12207 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* pod create: remove need for pause imageValentin Rothberg2021-10-26
| | | | | | | | | So far, the infra containers of pods required pulling down an image rendering pods not usable in disconnected environments. Instead, build an image locally which uses local pause binary. Fixes: #10354 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* codespell codeDaniel J Walsh2021-10-12
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --time out for podman * rm -f commandsDaniel J Walsh2021-10-04
| | | | | | | | | Add --time flag to podman container rm Add --time flag to podman pod rm Add --time flag to podman volume rm Add --time flag to podman network rm Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Pod Device-Read-BPS supportcdoern2021-09-28
| | | | | | | | | added the option for the user to specify a rate, in bytes, at which they would like to be able to read from the device being added to the pod. This is the first in a line of pod device options. WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name Signed-off-by: cdoern <cdoern@redhat.com>
* Created MapOptions for PodCreatecdoern2021-09-20
| | | | | | | | MapOptions take the pod and container create options, assigning matching values from infra back to the pod for the Libpod API. This function, unlike the previous one, does not require any manual additions when new options are added since it uses the structs JSON tags, this is a more modular approach. Signed-off-by: cdoern <cdoern@redhat.com>
* Pod Volumes Supportcdoern2021-09-14
| | | | | | | | | added support for the --volume flag in pods using the new infra container design. users can specify all volume options they can with regular containers resolves #10379 Signed-off-by: cdoern <cdoern@redhat.com>
* inspect: printTmpl must Flush writerAditya Rajan2021-09-09
| | | | | | | Flush should be called after the last call to Write to ensure that any data buffered in the Writer is written to output. Any incomplete escape sequence at the end is considered complete for formatting purposes. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* kube: Add support for podman pod logsAditya Rajan2021-09-05
| | | | | | | | | | | Following PR adds support for `kubectl` like `pod logs` to podman. Usage `podman pod logs <podIDorName` gives a stream of logs for all the containers within the pod with **containername** as a field. Just like **`kubectl`** also supports `podman pod logs -c ctrIDorName podIDorName` to limit the log stream to any of the specificied container which belongs to pod. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* Merge pull request #11102 from cdoern/infraEnhanceOpenShift Merge Robot2021-08-27
|\ | | | | InfraContainer Rework
| * InfraContainer Reworkcdoern2021-08-26
| | | | | | | | | | | | | | | | | | | | InfraContainer should go through the same creation process as regular containers. This change was from the cmd level down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state) Signed-off-by: cdoern <cdoern@redhat.com>
* | Shell completion for --format with anonymous fieldsPaul Holzinger2021-08-27
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit d81021ed265e I introduced shell completion for the `--format` flag. This is a very nice way to complete go template field names. However it did not work correct for anonymous fields. In this case the child fields can be accessed directly from the parent. For example: ``` type Anonymous struct { Field1 string Field2 string ... } type MyType struct { Anonymous } var s = MyType{} ``` Now if you want to access a field from the Anonymous struct you can just do `s.Field1`. The same is allowed for go templates, using `{{.Field1}}` should work. This commit adds this functionality, if the field is anonymous read the child field names recursively and add them to the suggestions. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* --infra-name command line argumentJosé Guilherme Vanz2021-07-15
| | | | | | | | | Adds the new --infra-name command line argument allowing users to define the name of the infra container Issue #10794 Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
* Merge pull request #10894 from cdoern/pidPodOpenShift Merge Robot2021-07-15
|\ | | | | podman pod create --pid flag
| * podman pod create --pid flagcdoern2021-07-15
| | | | | | | | | | | | | | | | added support for --pid flag. User can specify ns:file, pod, private, or host. container returns an error since you cannot point the ns of the pods infra container to a container outside of the pod. Signed-off-by: cdoern <cdoern@redhat.com>
* | Restore headers of optional information in 'podman pod ps'Hironori Shiina2021-07-09
|/ | | | | | | | | When optional information such as container IDs and names in pods, the headers are not displayed. This fix restored the headers. Documentation of this subcommand is also updated. Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
* Podman Pod Create --cpus and --cpuset-cpus flagscdoern2021-06-23
| | | | | | | | | | | | Added logic and handling for two new Podman pod create Flags. --cpus specifies the total number of cores on which the pod can execute, this is a combination of the period and quota for the CPU. --cpuset-cpus is a string value which determines of these available cores, how many we will truly execute on. Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* Scrub podman commands to use report packageJhon Honce2021-06-16
| | | | | | | | | | | | | | | | Refactor podman commands that have drifted from using c/common report pkg. Report pkg is needed to implement go template functions. Removed obsolete code from podman which exists in c/common. Latest template library added default newlines and method to remove them. Incorporated needed changes in c/common PR below. Depends on https://github.com/containers/common/pull/624 Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1855983 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Enable port forwarding on hostBrent Baude2021-06-01
| | | | | | | | | | | Using the gvproxy application on the host, we can now port forward from the machine vm on the host. It requires that 'gvproxy' be installed in an executable location. gvproxy can be found in the containers/gvisor-tap-vsock github repo. [NO TESTS NEEDED] Signed-off-by: Brent Baude <bbaude@redhat.com>
* [Techinal Debt] Cleanup ABI vs. Tunnel CLI commandsJhon Honce2021-05-27
| | | | | | | | | | | | | | | | | | [NO TESTS NEEDED] This commit cleans up two issues: * Most commands support all EngineModes so default to that. Let outlayers declare their intent. * Use cobra.Annotations to set supported EngineMode. This simplies instantiating commands as there is now one method to communicate a commands requirements rather than two. * Combined aliased commands into one file * Fixed aliased commands where Args field did not match * Updated examples in README.md for writing commands * Remove redundant flag DisableFlagsInUseLine in cobra.Command initialization. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add go template shell completion for --formatPaul Holzinger2021-04-22
| | | | | | | | | | | | | | | | | | | The --format flags accepts go template strings. I use this often but I consistently forget the field names. This commit adds a way to provide shell completion for the --format flag. It works by automatically receiving the field names with the reflect package from the given struct. This requires almost no maintenance since this ensures that we always use the correct field names. This also works for nested structs. ``` $ podman ps --format "{{.P" {{.Pid}} {{.PIDNS}} {{.Pod}} {{.PodName}} {{.Ports}} ``` NOTE: This only works when you use quotes otherwise the shell does not provide completions. Also this does not work for fish at the moment. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add --noheading flag to all list commandsDaniel J Walsh2021-04-21
| | | | | | | | | | Currently we have only podman images list --noheading. This PR Adds this option to volumes, containers, pods, networks, machines, and secrets. Fixes: https://github.com/containers/podman/issues/10065 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Enable whitespace linterPaul Holzinger2021-02-11
| | | | | | | | Use the whitespace linter and fix the reported problems. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Fix --network parsing for podman pod createPaul Holzinger2021-01-31
| | | | | | | | | | | | The `--network` flag is parsed differently for `podman pod create`. This causes confusion and problems for users. The extra parsing logic ignored unsupported network options such as `none`, `container:...` and `ns:...` and instead interpreted them as cni network names. Tests are added to ensure the correct errors are shown. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add 'MemUsageBytes' format optionStuart Shelton2021-01-12
| | | | | | | | | | | | | Although storage is more human-readable when expressed in SI units, IEC/JEDEC (Bytes) units are more pertinent for memory-related values (and match the format of the --memory* command-line options). (To prevent possible compatibility issues, the default SI display is left unchanged) See https://github.com/containers/podman/issues/8945 Signed-off-by: Stuart Shelton <stuart@shelton.me>
* Fix problems reported by staticcheckPaul Holzinger2021-01-12
| | | | | | | | | | | | | | `staticcheck` is a golang code analysis tool. https://staticcheck.io/ This commit fixes a lot of problems found in our code. Common problems are: - unnecessary use of fmt.Sprintf - duplicated imports with different names - unnecessary check that a key exists before a delete call There are still a lot of reported problems in the test files but I have not looked at those. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add Networks format placeholder to podman ps and pod psPaul Holzinger2021-01-09
| | | | | | | `podman ps --format {{.Networks}}` will show all connected networks for this container. For `pod ps` it will show the infra container networks. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #8635 from Luap99/shell-completion-testOpenShift Merge Robot2020-12-09
|\ | | | | Add system test for shell completion
| * Add system test for shell completionPaul Holzinger2020-12-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There exists a unit test to ensure that shell completion functions are defined. However there was no check about the quality of the provided shell completions. Lets change that. The idea is to create a general test that makes sure we are suggesting containers,pods,images... for the correct commands. This works by reading the command use line and checking for each arg if we provide the correct suggestions for this arg. It includes the following tests: - flag suggestions if [options] is set - container, pod, image, network, volume, registry completion - path completion for the appropriate arg KEYWORDS (`PATH`,`CONTEXT`,etc.) - no completion if there are no args - completion for more than one arg if it ends with `...]` The test does not cover completion values for flags and not every arg KEYWORD is supported. This is still a huge improvement and covers most use cases. This test spotted several inconsistencies between the completion and the command use line. All of them have been adjusted to make the test pass. The biggest advantage is that the completions always match the latest command changes. So if someone changes the arguments for a command this ensures that the completions must be adjusted. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Repeat system pruning until there is nothing removedDaniel J Walsh2020-12-09
|/ | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Revert "Allow multiple --network flags for podman run/create"Luap992020-11-30
| | | | | | | | | As described in issue #8507 this commit contains a breaking change which is not wanted in v2.2. We can discuss later if we want this in 3.0 or not. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Implement shell completion for podman topPaul Holzinger2020-11-23
| | | | Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Merge pull request #8410 from Luap99/fix-multiple-networksOpenShift Merge Robot2020-11-21
|\ | | | | Allow multiple --network flags for podman run/create
| * Allow multiple --network flags for podman run/createPaul Holzinger2020-11-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We allow a container to be connected to several cni networks but only if they are listed comma sperated. This is not intuitive for users especially since the flag parsing allows multiple string flags but only would take the last value. see: spf13/pflag#72 Also get rid of the extra parsing logic for pods. The invalid options are already handled by `pkg/specgen`. A test is added to prevent a future regression. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | Specify what the replace flag replaces in help textBenjamin Porter2020-11-20
|/ | | | | | | | | | The word "name" appears to have been missed in the help output for: podman pod create --help This patch fixes that Signed-off-by: Benjamin Porter <FreedomBen@users.noreply.github.com>
* Shell completion for podman ps and podman pod ps --filterPaul Holzinger2020-11-19
| | | | | | | | | | | Add all available filter options for `podman ps` and `podman pod ps` to the completions. Refactor the code a bit to make it easier to handle key value pairs in completions. The `completeKeyValues` function helps to reduce code duplication. Also make use of the new filter logic in the completions. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Remove some more excessive wrapping and stutteringDaniel J Walsh2020-11-17
| | | | | | | | | | Stop over wrapping API Calls The API calls will return an appropriate error, and this wrapping just makes the error message look like it is stuttering and a big mess. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add shell completion with cobraPaul Holzinger2020-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow automatic generation for shell completion scripts with the internal cobra functions (requires v1.0.0+). This should replace the handwritten completion scripts and even adds support for fish. With this approach it is less likley that completions and code are out of sync. We can now create the scripts with - podman completion bash - podman completion zsh - podman completion fish To test the completion run: source <(podman completion bash) The same works for podman-remote and podman --remote and it will complete your remote containers/images with the correct endpoints values from --url/--connection. The completion logic is written in go and provided by the cobra library. The completion functions lives in `cmd/podman/completion/completion.go`. The unit test at cmd/podman/shell_completion_test.go checks if each command and flag has an autocompletion function set. This prevents that commands and flags have no shell completion set. This commit does not replace the current autocompletion scripts. Closes #6440 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Restore --format table header supportJhon Honce2020-10-29
| | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #8077 from jwhonce/wip/reportOpenShift Merge Robot2020-10-21
|\ | | | | Refactor podman to use c/common/pkg/report
| * Refactor podman to use c/common/pkg/reportJhon Honce2020-10-21
| | | | | | | | | | | | | | All formatting for containers stack moved into one package The does not correct issue with headers when using custom tables Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Switch use of Flags to OptionsDaniel J Walsh2020-10-21
|/ | | | | | | | Want to have man pages match commands, since we have lots of printed man pages with using Options, we will change the command line to use Options in --help. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-29 17:28:26 +0000