aboutsummaryrefslogtreecommitdiff
path: root/cmd/podman/save.go
Commit message (Collapse)AuthorAge
* first pass of corrections for golangci-lintbaude2019-07-10
| | | | Signed-off-by: baude <bbaude@redhat.com>
* Vendor in logrus v1.4.2Jhon Honce2019-06-18
| | | | | | Fixes #3346 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* runtime: pass down the contextGiuseppe Scrivano2019-04-26
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Fix segfaults attribute to missing optionsbaude2019-04-15
| | | | | | | | | In cases where the remote client culls options to a command, we need to be sure that the lookup for that flag does not result in a nil pointer. To do so, we add a Remote attribute to the podman struct and then cli helper funcs are now aware they are remote. Signed-off-by: baude <bbaude@redhat.com>
* save-load-export: clear cli-parsing defaultEd Santiago2019-03-14
| | | | | | | | | | | | ...in order to silence Cobra's usually-helpful "(default xxx)" message. Initialization is now done in code, by testing for empty string and setting that to /dev/std{in,out} as appropriate; make special note of load.go where there's mild duplication between a local variable and cliconfig. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Usage messages: deduplicate '(default true)' et alEd Santiago2019-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove hardcoded '(default: true)' strings from bool flags, and '(default this-or-that)' from string flags. First because it's unmaintainable duplication that would cause confusion should someone ever change the default and not notice the message. Second, because cobra[1] already prints '(default XXXX)' for all options with non-false non-nil default. So in each of these cases, current podman help behavior is: $ podman login --help ... --tls-verify Require HTTPS ... (default: true) (default true) This PR eliminates that duplication. [1] actually spf13/pflag/flag.go The only nontrivial one of these is start.go, where the default for sigProxy depends on the --attach flag. Solution: change the command-line default to false, and implement the new conditional default in logic. Bonus: removed unnecessary check, because now if sigProxy is set without --attach, we can guarantee that it was done by the user. But please pay close scrutiny to this particular section in case there's something I missed. Signed-off-by: Ed Santiago <santiago@redhat.com>
* preparation for remote-client create containerbaude2019-03-11
| | | | | | | | | to prepare for being able to remotely run a container, we need to perform a refactor to get code out of main because it is not reusable. the shared location is a good starting spot though eventually some will likely end up in pkg/spec/ at some point. Signed-off-by: baude <bbaude@redhat.com>
* Fix help commands to show short and long description.Daniel J Walsh2019-03-07
| | | | | | Cleanup lots of help information to look good when displayed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Better usage synopses for subcommandsEd Santiago2019-02-26
| | | | | | | Conceptually simple: include, where applicable, a brief description of command-line options for each subcommand. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Enable more podman-remote pod commandsbaude2019-02-22
| | | | | | enable pod start, stop, and kill subcommands for the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* Improve command line validationbaude2019-02-22
| | | | | | | Use the checkallandlatest function to validate flag usage as part of the cobra command args validation. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote save [image]baude2019-02-20
| | | | | | | Add the ability to save an image from the remote-host to the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* Add 4th chunk of Cobra ExamplesTomSweeneyRedHat2019-02-18
| | | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Adds the 4th chunk of Cobra Examples to the CLI help. One more chunk of 10 to complete. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* Don't show global flags except for podman commandDaniel J Walsh2019-02-12
| | | | | | | | | Subcommands should not be showing the global flags. This causes the important information to scroll off the screen. Also fixed a typo on runCommmand (Too many 'm's) Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Separate remote and local commandsbaude2019-02-11
| | | | | | | | In the previous CLI, we had an accurate depiction of commands available for the remote client and those available for the local client. Signed-off-by: baude <bbaude@redhat.com>
* Migrate to cobra CLIbaude2019-02-08
| | | | | | | | We intend to migrate to the cobra cli from urfave/cli because the project is more well maintained. There are also some technical reasons as well which extend into our remote client work. Signed-off-by: baude <bbaude@redhat.com>
* Capatilize all usage and descriptionsDaniel J Walsh2019-02-05
| | | | | | | | | We have no consistancy in out option usages and descritions on whether or not the first letter should be capatalized. This patch forces them all to be capatilized. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove the forceSecure parameter of Image.PushImageTo*Miloslav Trmač2018-12-06
| | | | | | | DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool can now represent that value, so forceSecure is redundant. Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* Sort all command flagsQi Wang2018-10-11
| | | | Signed-off-by: Qi Wang <qiwan@redhat.com>
* don't print help message for usage errorsValentin Rothberg2018-08-31
| | | | | | | | | | | | | | | | | Don't print potentially verbose help messages in case of usage errors, but print only the usage error followed by a pointer to the command's help. This aligns with Docker. ``` $ podman run -h flag needs an argument: -h See 'podman run --help'. ``` Signed-off-by: Valentin Rothberg <vrothberg@suse.com> Closes: #1379 Approved by: rhatdan
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* Fix ambiguity in adding localhost to podman savehaircommander2018-08-08
| | | | | | | | | | | ...and some naming decisions. This change ensures podman save doesn't incorrectly prepend localhost when saving an image. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1140 Approved by: rhatdan
* RFC? Hard-code "format" string values instead of using libpod.* transport namesMiloslav Trmač2018-08-01
| | | | | | | | | | | | | We don't really want to change the names of the CLI options just because the transport names change (with oci-dir/docker-dir there is no direct correspondence wanyway), and this removes a dependency. Should not change behavior. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Use PushImageToReference for (podman save)Miloslav Trmač2018-08-01
| | | | | | | | | | | | To do that, create the relevant ImageReference values directly by calling ParseReference/NewReference from the relevant transport subpackages instead of formatting strings to be parsed (and heuristically re-parsed) by PushImage. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Call imageNameForSaveDestination while creating the referencesMiloslav Trmač2018-08-01
| | | | | | | | | | | | | | | | | Instead of creating a reference string and then checking it again to see which kind of archive it is, just call imageNameForSaveDestination at the place where we already know what kind of archive it is because we are making that decision. This also notably fixes the use of strings.CONTAINS to see whether the just constructed strings start with one of the transport names; that would match anywhere in the path. Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Exit early in the simple case in imageNameForSaveDestinationMiloslav Trmač2018-08-01
| | | | | | | | | | | ... to make it a tiny bit easier to read. Should not change behavior (but does not add unit tests). Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Rename parameters of imageNameForSaveDestinationMiloslav Trmač2018-08-01
| | | | | | | | | | | ... to make their relationship clear, at the very least. Should not change behavior (but does not add unit tests). Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Split imageNameForSaveDestination from saveCmdMiloslav Trmač2018-08-01
| | | | | | | | | | | | | We will need to call it from two places in the future. Should not change behavior, the code is pretty unchanged (down to using confusing parameter names, which we will change immediately) (but does not add unit tests). Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Split a single if statement into two.Miloslav Trmač2018-08-01
| | | | | | | | | | | This should not change behavior; it will only make it easier to show that future code move does not change it (but does not add unit tets.) Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Move source handling before destination parsingMiloslav Trmač2018-08-01
| | | | | | | | | | | | | | This will allow adding the reference in the OCIArchive/DockerArchive case in one step, instead of appending it later. Should not change behavior, except that source-related errors will now be reported before possible destination-related errors (but does not add unit tests). Signed-off-by: Miloslav Trmač <mitr@redhat.com> Closes: #1176 Approved by: rhatdan
* Podman load/tag/save prepend localhost when no repository is presenthaircommander2018-07-20
| | | | | | Instead of having docker.io/library as its repository. Test included. Signed-off-by: haircommander <pehunt@redhat.com>
* save and load should support multi-tag for docker-archiveumohnani82018-05-25
| | | | | | | | | | | | The docker-archive tar files can have multiple tags for the same image stored in it. Load pulls all the tags found in the archive when loading a tar file. Save can oush multiple tags of the same image to a tar archive. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #819 Approved by: rhatdan
* Allow push/save without image referenceumohnani82018-05-16
| | | | | | | | | | | | If the user uses the image ID when saving to either docker-archive or oci-archive, then do not save a reference in the manifest/index.json. If the user chooses to push without an image reference, i.e <transport>:<path> it should be valid and succeed. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #782 Approved by: rhatdan
* podman push should honor registries.confbaude2018-05-10
| | | | | | | | | | | Like podman pull, when you push an image, podman should check if the registry is listed as insecure and if so, it should --tls-verify=false unless the user overrides this. Signed-off-by: baude <bbaude@redhat.com> Closes: #738 Approved by: mheon
* Make ':' a restricted character for file namesumohnani82018-04-30
| | | | | | | | | | | file names for podman load, save, export, and import cannot contain ":" in them. It is a reserved character for parsing filenames. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #694 Approved by: rhatdan
* varlink imagesbaude2018-04-26
| | | | | | | | | | | | | implement varlink image functions for working with libpod with the exception of a couple due to incompletions on the libpod side of things (build). also, created a first pass at a libpodpy package which will stand as a client to working with libpod's varlink methods using python. Signed-off-by: baude <bbaude@redhat.com> Closes: #669 Approved by: baude
* Vendor in latest containers/image and contaners/storageumohnani82018-04-19
| | | | | | | | | Made necessary changes to functions to include contex.Context wherever needed Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #640 Approved by: baude
* Stage 4 Image cleanupbaude2018-03-23
| | | | | | | | | | Cull funcs from runtime_img.go which are no longer needed. Also, fix any remaining spots that use the old image technique. Signed-off-by: baude <bbaude@redhat.com> Closes: #532 Approved by: mheon
* Fix podman save when redirecting outputumohnani82018-02-20
| | | | | | | | | | | podman save would write the progress bar to the image tar file when the output was redirected with >. Fixed the writer to write to stderr for all commands using writer Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #362 Approved by: mheon
* Fix issue with order of flagsumohnani82018-01-25
| | | | | | | | | | The order of the flags was casuing issue. Enabled SkipArgReorder to fix the problem. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #259 Approved by: rhatdan
* Rename all references to kpod to podmanDaniel J Walsh2017-12-18
The decision is in, kpod is going to be named podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #145 Approved by: umohnani8