summaryrefslogtreecommitdiff
path: root/cmd/podman/varlink
Commit message (Collapse)AuthorAge
* size is optional for container inspectionbaude2019-03-26
| | | | | | | | | | on the remote client, if a user wants to know the rootfs size of a container, a -s should be passed. this corrects a behavior where size was shown by default. Fixes #2765 Signed-off-by: baude <bbaude@redhat.com>
* Add "died" eventbaude2019-03-25
| | | | | | | | | | We have a new event for container 'Exited' which has been renamed to 'died'. also removed the stream bool from the varlink endpoint for events because it can be determined by the varlink more value. Signed-off-by: baude <bbaude@redhat.com>
* display logs for multiple containers at the same timebaude2019-03-15
| | | | | | | | | | | | | | add the ability for users to specify more than one container at a time while using podman logs. If more than one container is being displayed, podman will also prepend a shortened container id of the container on the log line. also, enabled the podman-remote logs command during the refactoring of the above ability. fixes issue #2219 Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2612 from KKoukiou/api-doc-fixOpenShift Merge Robot2019-03-11
|\ | | | | Fix broken link in API.md
| * Fix broken link in io.podman.varlinkKaterina Koukiou2019-03-11
| | | | | | | | | | | | Link to InspectImage was broken. Signed-off-by: Katerina Koukiou <kkoukiou@redhat.com>
* | Add event logging to libpod, even display to podmanbaude2019-03-11
|/ | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2534 from jwhonce/wip/remote_waitOpenShift Merge Robot2019-03-06
|\ | | | | Implement podman-remote wait command and container subcommand
| * Implement podman-remote wait command and container subcommandJhon Honce2019-03-06
| | | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | podman-remote pod top|statsbaude2019-03-06
|/ | | | | | | this is the final enablement for the pod subcommand. it includes the ability to run podman-remote pod top and stats. Signed-off-by: baude <bbaude@redhat.com>
* Support podman-remote stop container(s)Jhon Honce2019-03-02
| | | | | | | | | | * Clean up adapter code * Add GetContainersByContext to Varlink API * Add missing comments * Restore save command * Restore error type mapping when using varlink Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #2404 from baude/remoteerrorsOpenShift Merge Robot2019-02-23
|\ | | | | make remote-client error messaging more robust
| * make remote-client error messaging more robustbaude2019-02-22
| | | | | | | | | | | | | | | | | | the remote-client is currently weak for carrying error messages over the varlink interface and displaying something useful to users and developers for the purposes of debug. this is a starting point to improve that user experience. Signed-off-by: baude <bbaude@redhat.com>
* | podman-remote pod inspect|existsbaude2019-02-22
|/ | | | | | | | enable the remote client to be able to inspect a pod. also, bonus of enabling the podman pod exists command which returns a 0 or 1 depending on whether the given pod exists. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote load imagebaude2019-02-21
| | | | | | | enable the ability to load an image into remote storage using the remote client. Signed-off-by: baude <bbaude@redhat.com>
* enable podman-remote pod rmbaude2019-02-21
| | | | | | add the ability to delete a pod from the remote client. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote save [image]baude2019-02-20
| | | | | | | Add the ability to save an image from the remote-host to the remote-client. Signed-off-by: baude <bbaude@redhat.com>
* iopodman.SearchImages: add ImageSearchFilter to Varlink APIValentin Rothberg2019-02-20
| | | | | | | | | | | | Also add some argument checks to the Varlink function to avoid referencing nil pointers, and complement the API.md descriptions. The varlink endpoint can be tested via varlink CLI: $ varlink call -m unix:/run/podman/io.podman/io.podman.SearchImages \ '{"query": "ruby", "limit": 0, "tlsVerify": false, "filter": {}}' Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* SearchImages: extend API with filter parameterValentin Rothberg2019-02-20
| | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* podman-remote pullbaude2019-02-19
| | | | | | Add status for remote users and podman remote-client pull. Signed-off-by: baude <bbaude@redhat.com>
* Add registry name to fields returned by varlink image searchDaniel J Walsh2019-02-15
| | | | | | | | | | | Cockpit team wants to list the registry name where the image was found. Also fix up SearchImages code to check if the user specified a registry in his call to use that rather then all the registries, This matches podman search command. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #2305 from rhatdan/tlsverifyOpenShift Merge Robot2019-02-15
|\ | | | | Add tlsVerify bool to SearchImage for varlink
| * Add tlsVerify bool to SearchImage for varlinkDaniel J Walsh2019-02-14
| | | | | | | | | | | | | | | | | | | | Cockpit wants to be able to search images on systems without tlsverify turned on. tlsverify should be an optional parameter, if not set then we default to the system defaults defined in /etc/containers/registries.conf. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #2332 from baude/remotevolumepruneOpenShift Merge Robot2019-02-14
|\ \ | | | | | | volume prune
| * | enable podman-remote volume prunebaude2019-02-14
| |/ | | | | | | | | | | | | | | | | | | | | | | | | allow users to remotely prune volumes. this is the last volume command for remote enablement. as such, the volume commands are being folded back into main because they are supported for both local and remote clients. also, enable all volume tests that do not use containers as containers are not enabled for the remote client yet. Signed-off-by: baude <bbaude@redhat.com>
* / Fix volume handling in podmanDaniel J Walsh2019-02-14
|/ | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman-remote buildbaude2019-02-13
| | | | | | | add the ability to build images using files local to the remote-client but over a varlink interface to a "remote" server. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote volume inspect|lsbaude2019-02-13
| | | | | | | add the ability to list and inspect volumes using the remote client and varlink Signed-off-by: baude <bbaude@redhat.com>
* podman-remote pushbaude2019-02-13
| | | | | | | | | | enable podman-remote push so that users can push images from a remote client. change in push API to deal with the need to see output over the varlink connection. Signed-off-by: baude <bbaude@redhat.com>
* varlink: Rename `SearchImage` to `SearchImages`Lars Karlitski2019-02-12
| | | | | | | Also rename image result struct to `ImageSearchResult` and make `limit` parameter optional. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Rename `ContainerInList` to `Container`Lars Karlitski2019-02-12
| | | | | | Container more clearly describes what the type represents. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Rename `ImageInList` to `Image`Lars Karlitski2019-02-12
| | | | | | | | | Image more clearly describes what the type represents. Also, only include the image name in the `ImageNotFound` error returned by `GetImage()`, not the full error message. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Simplify GetVersion() callLars Karlitski2019-02-12
| | | | | | | Not having the `Version` wrapper type makes it easier for clients to work with the returned data. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Return all times in RFC 3339 formatLars Karlitski2019-02-12
| | | | | | | | | This is more consistent and eaiser to parse than the format that golang's time.String() returns. Fixes #2260 Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Remove the Ping() methodLars Karlitski2019-02-12
| | | | | | | | There are other ways for developers to "ensure their varlink setup is working", for example by calling `GetVersion()` or any call on the org.varlink.service interface. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* varlink: Remove `NotImplemented` typeLars Karlitski2019-02-12
| | | | | | | | Remove the `NotImplemented` type and comment out the methods that use it. This way we can keep track of the methods that still need to be implemented without committing them to stable API. Signed-off-by: Lars Karlitski <lars@karlitski.net>
* podman-remote volume rmbaude2019-02-11
| | | | | | | add the ability to remove/delete volumes with the podman remote client. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote volume createbaude2019-02-11
| | | | | | create a volume using the remote client over varlink Signed-off-by: baude <bbaude@redhat.com>
* podman-remote import|exportbaude2019-02-05
| | | | | | | | addition of import and export for the podman-remote client. This includes the ability to send and receive files between the remote-client and the "podman" host using an upgraded varlink connection. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2236 from baude/listcontainermountsmapOpenShift Merge Robot2019-02-01
|\ | | | | Alter varlink API for ListContainerMounts to return a map
| * Alter varlink API for ListContainerMounts to return a mapbaude2019-01-29
| | | | | | | | | | | | | | | | | | We want to return a map of containermounts where the key is container id and it points to the mountpath. Issue #2215 Signed-off-by: baude <bbaude@redhat.com>
* | podman image prune -- implement all flagbaude2019-01-29
|/ | | | | | | | | | | we now, by default, only prune dangling images. if --all is passed, we prune dangling images AND images that do not have an associated containers. also went ahead and enabled the podman-remote image prune side of things. Fixes: #2192 Signed-off-by: baude <bbaude@redhat.com>
* enable podman-remote versionbaude2019-01-21
| | | | | | | | | | initial enablement of podman-remote version. includes add a APIVersion const that will allow us to check compatibility between host/client when connections are made. also added client related information to podman info. Signed-off-by: baude <bbaude@redhat.com>
* podman-remote inspectbaude2019-01-18
| | | | | | base enablement of the inspect command. Signed-off-by: baude <bbaude@redhat.com>
* Collaberative podman-remote container existsbaude2019-01-15
| | | | | | | Began frameout of container super structs for adapted methods. This allows for the use of container exists. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2135 from baude/varlinkpruneOpenShift Merge Robot2019-01-11
|\ | | | | Add varlink support for prune
| * Add varlink support for prunebaude2019-01-10
| | | | | | | | | | | | | | Add the ability to prune unused images using the varlink API. Signed-off-by: baude <bbaude@redhat.com>
* | remote-client support for imagesbaude2019-01-10
|/ | | | Signed-off-by: baude <bbaude@redhat.com>
* add container-init supportValentin Rothberg2019-01-04
| | | | | | | | | | | | | | | | | | | Add support for executing an init binary as PID 1 in a container to forward signals and reap processes. When the `--init` flag is set for podman-create or podman-run, the init binary is bind-mounted to `/dev/init` in the container and "/dev/init --" is prepended to the container's command. The default base path of the container-init binary is `/usr/libexec/podman` while the default binary is catatonit [1]. This default can be changed permanently via the `init_path` field in the `libpod.conf` configuration file (which is recommended for packaging) or temporarily via the `--init-path` flag of podman-create and podman-run. [1] https://github.com/openSUSE/catatonit Fixes: #1670 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add Playbaude2018-12-19
| | | | | | | podman play kube adds the ability for the user to recreate pods and containers from a Kubernetes YAML file in libpod. Signed-off-by: baude <bbaude@redhat.com>
* Clean up some existing varlink endpointsbaude2018-12-12
| | | | | | | | Going through and adding options (like tls-verify, signature option, etc) to some varlink endpoints (like push/pull) many of which had not been updated since their original authoring. Signed-off-by: baude <bbaude@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-05 06:57:17 +0000