aboutsummaryrefslogtreecommitdiff
path: root/cmd
Commit message (Collapse)AuthorAge
* podman image scp syntax correctioncdoern2022-02-03
| | | | | | | | | [NO NEW TESTS NEEDED] image scp was reading the localhost syntax too loosely causing some errors with domains or hosts containing the word localhost. Fixed that and added a few lines to make sure the pure localhost connections do not touch sshd resolves #13021 Signed-off-by: cdoern <cdoern@redhat.com>
* system prune: remove all networksPaul Holzinger2022-02-03
| | | | | | | | | | | | | | | podman system prune should also remove all networks. When we want to users to migrate to the new network stack we recommend to run podman system reset. However this did not remove networks and if there were still networks around we would continue to use cni since this was considered an old system. There is one exception for the default network. It should not be removed since this could cause other issues when it no longer exists. The network backend detection logic ignores the default network so this is fine. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Only change network fields if they were actually changed by the userDaniel J Walsh2022-02-03
| | | | | | Fixes: https://github.com/containers/podman/issues/13065 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix use of infra image to clarify defaultDaniel J Walsh2022-02-03
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #13042 from Luap99/subnetsOpenShift Merge Robot2022-01-27
|\ | | | | network create: allow multiple subnets
| * network create: allow multiple subnetsPaul Holzinger2022-01-27
| | | | | | | | | | | | | | | | | | | | | | podman network create --subnet, --gateway and --ip-range can now be specified multiple times to join the network to more than one subnet. This is very useful if you want to use a dual stack network and assign a fixed ipv4 and ipv6 subnet. The order of the options is important here, the first --gateway/--ip-range will be assigned to the first subnet and so on. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Merge pull request #13029 from TomSweeneyRedHat/dev/tsweeney/mergepull2OpenShift Merge Robot2022-01-27
|\ \ | |/ |/| Bump Buildah to v1.24.0
| * Bump Buildah to v1.24.0tomsweeneyredhat2022-01-27
| | | | | | | | | | | | | | | | | | Bumps Buildah to v1.24.0 and adopts the new values for pull: true, false, never, and always. The pull-never and pull-always options for the build command are still usable, but they have been removed from the man page documentation with this change. Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
* | switch podman image scp from depending on machinectl to just os/execcdoern2022-01-26
|/ | | | | | | | | machinectl does not propogate error messages and adds extra lines in the output, exec.Cmd is able to clear the env besides PATH and TERM, and use the given UID and GID to execute the command properly. machinectl is still used to create a user session. Ubuntu support is limited by this. Signed-off-by: cdoern <cdoern@redhat.com>
* Merge pull request #12996 from Luap99/buildah-rootlessOpenShift Merge Robot2022-01-24
|\ | | | | remote build: set rootless oci isolation correctly
| * remote build: set rootless oci isolation correctlyPaul Holzinger2022-01-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When we run rootless buildah needs to have IsolationOCIRootless set otherwise it will run code which cannot be used as rootless user. Podman should use the buildah default if possible and change it to rootless mode if needed. [NO NEW TESTS NEEDED] Should be covered by existing tests once we have podman-remote rootless tests. Fixes #12989 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Show correct default values or show noneDaniel J Walsh2022-01-24
|/ | | | | | | | | Before this PR, the podman --help command shows the defaults as runc and overlay even if the storage.conf and containers.conf files do not match. This PR changes them to show the actual defaults and in the case of storage driver, does not show the default at all. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Engine.Remote from containers.confJhon Honce2022-01-20
| | | | | | | | | | | | | | | Heuristic to initialize TunnelMode/remote podman: - Podman built with remote tag - Podman running on darwin or windows GOOS - CONTAINER_HOST or CONTAINER_CONNECTION set in environment - --remote flag given on command line - From containers.conf, Engine.Remote == true and GOOS == linux Otherwise, podman will run in ABIMode/linked against libpod library. Fixes #12866 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #12887 from esendjer/mainOpenShift Merge Robot2022-01-19
|\ | | | | Add custom defined dependencies to podman generate systemd
| * Handlers for `generate systemd` with custom dependenciesesendjer2022-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit includes: * Handlers for generate systemd unit with manually defined dependencies such as: Wants=, After= and Requires= * The new unit and e2e tests for checking generated systemd units for container and pod with custom dependencies * Documented descriptions for custom dependencies options Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
* | Implement API forwarding for podman machine on WindowsJason T. Greene2022-01-19
|/ | | | Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
* rename --cni-config-dir to --network-config-dirPaul Holzinger2022-01-18
| | | | | | | | Since this option will also be used for netavark we should rename it to something more generic. It is important that --cni-config-dir still works otherwise we could break existing container cleanup commands. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Revamp Libpod state strings for Docker compatMatthew Heon2022-01-17
| | | | | | | | | | | | | | | | | | | | | | | | Improve our compatibility with Docker by better handling the state strings that we print in `podman ps`. Docker capitalizes all states in `ps` (we do not) - fix this in our PS code. Also, stop normalizing ContainerStateConfigured to the "Created" state, and instead make it always be Created, with the existing Created state becoming Initialized. I didn't rename the actual states because I'm somewhat reticent to make such a large change a day before we leave for break. It's somewhat confusing that ContainerStateConfigured now returns Created, but internally and externally we're still consistent. [NO NEW TESTS NEEDED] existing tests should catch anything that broke. I also consider this a breaking change. I will flag appropriately on Github. Fixes RHBZ#2010432 and RHBZ#2032561 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #12860 from rhatdan/cgroupsOpenShift Merge Robot2022-01-17
|\ | | | | Use CONTAINERS_CONF cgroups flag for remote API.
| * Standardize on capatalized CgroupsDaniel J Walsh2022-01-14
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Unify the method of parsing filters in cmdJakub Guzik2022-01-16
| | | | | | | | | | | | | | | | This commit unifies the method of filters parsing in cmd. It removes also the function redundancy. [NO NEW TESTS NEEDED] Signed-off-by: Jakub Guzik <jguzik@redhat.com>
* | Refactor manifest list operationsJhon Honce2022-01-14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Update method/function signatures use the manifest list name and images associated with the operation explicitly, in general func f(ctx context.Context, manifestListName string, ImageNames []string, options *fOptions) * Leverage gorilla/mux Subrouters to support API v3.x and v4.x for manifests * Make manifest API endpoints more RESTful * Add PUT /manifest/{id} to update existing manifests * Add manifests.Annotate to go bindings, uncommented unit test * Add DELETE /manifest/{Id} to remove existing manifest list, use PUT /manifest/{id} to remove images from a list * Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use PUT /manifest/{id} instead * Corrected swagger godoc and updated to cover API changes * Update podman manifest commands to use registry.Context() * Expose utils.GetVar() to obtain query parameters by name * Unexpose server.registerSwaggerHandlers, not sure why this was ever exposed. * Refactored code to use http.Header instead of map[string]string when operating on HTTP headers. * Add API-Version header support in bindings to allow calling explicate versions of the API. Header is _NOT_ forwarded to the API service. Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Podman Build use absolute filepathcdoern2022-01-13
| | | | | | | | | podman build always finds the abs path but was never using it for the containerfile path. This was causing the remote client to be given a relative path that does not exist. Switch to evaluating and using absolute paths only. resolves #12841 Signed-off-by: cdoern <cdoern@redhat.com>
* Merge pull request #12826 from vrothberg/force-rm-podOpenShift Merge Robot2022-01-13
|\ | | | | podman container rm: remove pod
| * podman container rm: remove podValentin Rothberg2022-01-13
| | | | | | | | | | | | | | | | Support removing the entire pod when --depend is used on an infra container. --all now implies --depend to properly support removing all containers and not error out when hitting infra containers. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Merge pull request #12642 from Luap99/libnetworkOpenShift Merge Robot2022-01-13
|\ \ | |/ |/| use libnetwork from c/common
| * podman build enable --all-platforms and --unsetenvPaul Holzinger2022-01-13
| | | | | | | | | | | | | | Make sure we add support for allplatforms and unsetenv to both local and remote podman. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
| * use libnetwork from c/commonPaul Holzinger2022-01-12
| | | | | | | | | | | | | | | | The libpod/network packages were moved to c/common so that buildah can use it as well. To prevent duplication use it in podman as well and remove it from here. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Merge pull request #12836 from cdoern/podSysCtlOpenShift Merge Robot2022-01-13
|\ \ | | | | | | Podman Pod Create --sysctl support
| * | Podman Pod Create --sysctl supportcdoern2022-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | added support for pod wide sysctls. The sysctls supported are the same as the continer run controls. These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl resolves #12747 Signed-off-by: cdoern <cdoern@redhat.com>
* | | Merge pull request #12151 from rhatdan/nooutOpenShift Merge Robot2022-01-12
|\ \ \ | | | | | | | | Add --noout option to prevent the output of ids
| * | | Add --noout option to prevent the output of idsDaniel J Walsh2022-01-12
| | |/ | |/| | | | | | | | | | | | | Fixes: https://github.com/containers/podman/issues/11515 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* / | podman image scp: implement --quietEd Santiago2022-01-12
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Relay --quiet to save & load commands, in both Rootless and Rootful transfer functions. Also, a little cleanup: - remove unuseful SOURCE/DEST printfs - refactor duplication in execMachine() - fix Debug("Executing") statements to include the actual command they're executing [NO NEW TESTS NEEDED] : Tests are being slowly implemented in #12797 Signed-off-by: Charlie Doern <cdoern@redhat.com> Signed-off-by: Ed Santiago <santiago@redhat.com>
* | add additional fields to podman machine ls --jsonDaniel J Walsh2022-01-11
| | | | | | | | | | | | [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Add podman rm --dependDaniel J Walsh2022-01-11
| | | | | | | | | | | | | | | | | | | | | | This option causes Podman to not only remove the specified containers but all of the containers that depend on the specified containers. Fixes: https://github.com/containers/podman/issues/10360 Also ran codespell on the code Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #12806 from rhatdan/machine1Daniel J Walsh2022-01-11
|\ \ | | | | | | It takes some time to start a VM
| * | It takes some time to start a VMDaniel J Walsh2022-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are seeing some issues with users not understanding which VM they are starting, and if the VM takes a long time to start, they do not know where to look. Moving the name to before the VM starts at least allows them to realize they are starting the wrong VM. [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | | Pretty Print output of podman machine ls --format jsonDaniel J Walsh2022-01-11
|/ / | | | | | | | | | | | | | | Make JSON more prominent in podman machine ls --help and man page. [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* / Use the InfraImage defined in containers.confDaniel J Walsh2022-01-10
|/ | | | | | | | | Remove hard code use of the DefaultInfraImage and rely on getting this from containers.conf. Fixes: https://github.com/containers/podman/issues/12771 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #12614 from baude/bz2028408OpenShift Merge Robot2022-01-06
|\ | | | | fix healthcheck timeouts and ut8 coercion
| * fix healthcheck timeouts and ut8 coercionBrent Baude2022-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this commit fixes two bugs and adds regression tests. when getting healthcheck values from an image, if the image does not have a timeout defined, this resulted in a 0 value for timeout. The default as described in the man pages is 30s. when inspecting a container with a healthcheck command, a customer observed that the &, <, and > characters were being converted into a unicode escape value. It turns out json marshalling will by default coerce string values to ut8. Fixes: bz2028408 Signed-off-by: Brent Baude <bbaude@redhat.com>
* | Merge pull request #11454 from afbjorklund/virtfs-volumesOpenShift Merge Robot2022-01-06
|\ \ | |/ |/| Implement virtfs volumes for podman machine
| * Make it possible to select the volume driverAnders F Björklund2021-12-30
| | | | | | | | | | | | | | | | | | | | Use the same type of mounts for all the machine volumes. The default could change in the future, depending on OS. [NO NEW TESTS NEEDED] Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
| * Implement virtfs volumes for podman machineAnders F Björklund2021-12-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow using the built-in 9pfs feature of qemu, mounting host directories into vm mountpoints. The volumes are generic, the mounts are specific. Wait for the machine to be "running", otherwise the SSH function might throw an error instead. Increase the default msize from 8 KiB to 128 KiB [NO NEW TESTS NEEDED] Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
* | Merge pull request #12208 from cdoern/podSecurityOptOpenShift Merge Robot2022-01-05
|\ \ | | | | | | Pod Security Option support and Infra Inheritance changes
| * | Pod Security Option supportcdoern2021-12-27
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Added support for pod security options. These are applied to infra and passed down to the containers as added (unless overridden). Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit` This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create code and pod creation. resolves #12173 Signed-off-by: cdoern <cdoern@redhat.com>
* | Merge pull request #12429 from cdoern/scpOpenShift Merge Robot2022-01-05
|\ \ | | | | | | podman image scp never enter podman user NS
| * | podman image scp never enter podman user NScdoern2021-12-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Podman image scp should never enter the Podman UserNS unless it needs to. This allows for a sudo exec.Command to transfer images to and from rootful storage. If this command is run using sudo, the simple sudo podman save/load does not work, machinectl/su is necessary here. This modification allows for both rootful and rootless transfers, and an overall change of scp to be more of a wrapper function for different load and save calls as well as the ssh component Signed-off-by: cdoern <cdoern@redhat.com>
* | | add --ip6 flag to podman create/runPaul Holzinger2022-01-03
| |/ |/| | | | | | | | | | | | | | | | | | | | | Add the --ipv6 flag to podman create/run and pod create. We support the --network name:ip6=<ip> syntax now but for docker compat we should also support the --ip6 flag. Note that there is no validation if the ip is actually a v6 or v4 address because the backend does not care either. Fixes #7511 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-18 00:17:31 +0000