summaryrefslogtreecommitdiff
path: root/cmd
Commit message (Collapse)AuthorAge
* Implement podman run option --cgroup-parentJhon Honce2018-02-22
| | | | | | | | | | | Example: sudo /usr/local/bin/podman run --cgroup-parent=/zzz fedora cat /proc/self/cgroup Signed-off-by: Jhon Honce <jhonce@redhat.com> Closes: #370 Approved by: rhatdan
* Correct exit code 126 and 127baude2018-02-21
| | | | | | | | | | | | | | | | The exit codes for 126 and 127 were reversed. For the record, the exit codes used are as follows: * 125 if ‘chroot’ itself fails * 126 if COMMAND is found but cannot be invoked * 127 if COMMAND cannot be found This resolves issue #367 Signed-off-by: baude <bbaude@redhat.com> Closes: #378 Approved by: baude
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* Alias --time to --timeout for 'podman stop'Matthew Heon2018-02-21
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #375 Approved by: rhatdan
* Performance enhancement for podman imagesbaude2018-02-20
| | | | | | | | | | | | | Previous code was using slow routines to collect some of the information needed to output images. Specifically size was being calculated instead of using the cached, already known size already available. Also, straight- lined several of the code paths. Overall assessment is that these improvements cut the time for images in half. Signed-off-by: baude <bbaude@redhat.com> Closes: #365 Approved by: mheon
* Fix podman save when redirecting outputumohnani82018-02-20
| | | | | | | | | | | podman save would write the progress bar to the image tar file when the output was redirected with >. Fixed the writer to write to stderr for all commands using writer Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #362 Approved by: mheon
* Run podman inside a podman containerbaude2018-02-16
| | | | | | | | | | | | | | | | | We should be able to run nested podman containers in particular for our testing environment. i.e. eat our own dog food. Some privileges had to be corrected in order for this to work correctly. Added a third papr target that runs podman tests inside podman. I marked the test as not required right now as we get more confident in the results Signed-off-by: baude <bbaude@redhat.com> Closes: #340 Approved by: rhatdan
* images --all developer notebaude2018-02-16
| | | | | | | | | | | | | podman does not implement --all for images intermediate images are only generated during the build process. they are children to the image once built. until buildah supports caching builds, it will not generate these intermediate images. Signed-off-by: baude <bbaude@redhat.com> Closes: #344 Approved by: rhatdan
* Add podman versionDaniel J Walsh2018-02-15
| | | | | | | | Copy the way cri-o does this by adding a libpod/version Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #343 Approved by: mheon
* No registries warningbaude2018-02-15
| | | | | | | | | When no /etc/containers/registries.conf is found, log a warning message. Signed-off-by: baude <bbaude@redhat.com> Closes: #338 Approved by: mheon
* Return imageid from podman pullbaude2018-02-15
| | | | | | | | | | | | When using podman to pull an image, print the image id after the image is pulled. Resolves issue #329 Signed-off-by: baude <bbaude@redhat.com> Closes: #342 Approved by: rhatdan
* No entrpoint, cmd, or commandbaude2018-02-15
| | | | | | | | | | | | | When an image does not have an ENTRYPOINT nor a CMD and the user does not provide a command in the CLI, we should fail gracefully. This resolves issue #328 Signed-off-by: baude <bbaude@redhat.com> Closes: #333 Approved by: mheon
* Privileged containers should inherit host devicesbaude2018-02-15
| | | | | | | | | | When running a privileged container, it should inherit the same devices the host has. Signed-off-by: baude <bbaude@redhat.com> Closes: #330 Approved by: mheon
* PS performance cleanupsbaude2018-02-14
| | | | | | | | | | | By not getting data that we don't need and adding more locking functions under the batch, we are able to cut the time for listing 50 containers in half. More to come. Signed-off-by: baude <bbaude@redhat.com> Closes: #325 Approved by: mheon
* Disable default Seccomp profile with privileged containersMatthew Heon2018-02-13
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #326 Approved by: baude
* Change json to match docker inspectDaniel J Walsh2018-02-11
| | | | | | | | | | Changing these fields caused the output of podman inspect to more closely match docker inspect. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #306 Approved by: mheon
* Honor ENTRYPOINT in imagebaude2018-02-11
| | | | | | | | | | | | | When an image has an ENTRYPOINT defined, we should be honoring it. The problem is described in issue #321. Also, added buildah binary to test runtimes for testing entrypoint and will also allow us to test podman build as well. Signed-off-by: baude <bbaude@redhat.com> Closes: #322 Approved by: rhatdan
* Rework port codebaude2018-02-09
| | | | | | | | | | | Rework port code for generalized clean up and to address issue #269 where additional portbindings between host and containers we being introduced by error. Signed-off-by: baude <bbaude@redhat.com> Closes: #308 Approved by: mheon
* podman logs: fix tailingbaude2018-02-09
| | | | | | | | | | | Fix issues with tailing of container logs as described in issue #16. Also add in the ability to use a duration or known time stamp formats for the --since flag. Signed-off-by: baude <bbaude@redhat.com> Closes: #317 Approved by: mheon
* Add some global options to buildTomSweeneyRedHat2018-02-08
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #312 Approved by: mheon
* cleanup network stack as well as storage when container shuts down.Daniel J Walsh2018-02-08
| | | | | | This patch will cleanup the network stack when the container exits Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #290 from umohnani8/templatesDaniel J Walsh2018-02-07
|\ | | | | Fix when the --format flag prints a new line at the end
| * Fix when the --format flag prints a new line at the endumohnani82018-02-07
| | | | | | | | | | | | | | | | | | | | | | If the output is to a terminal, return a new line at the end of the output so that the output is visually appealing. If the output is being piped, or saved to a file, basically not being outputted to a terminal, do not print a new line at the end of the output. This ensures any further data manipulation with the results happens smoothly without requiring to remember the '/n' at the end of the output. Signed-off-by: umohnani8 <umohnani@redhat.com>
* | Merge pull request #289 from TomSweeneyRedHat/dev/tsweeney/usernameDaniel J Walsh2018-02-07
|\ \ | |/ |/| Change un/pwd handling to match Buildah's
| * Change un/pwd handling to match Buildah'sTomSweeneyRedHat2018-02-06
| | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* | Match podman inspect output to docker inspectumohnani82018-02-06
| | | | | | | | | | | | | | | | | | | | | | | | Made a change to make sure that the output paths of podman inspect matches that of docker inspect. For example to get the stop signal you should be able to do podman inspect ctr --format {{.Config.StopSignal}} and the same thing in docker will give the same results. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #292 Approved by: rhatdan
* | Change stop signal default to SIGTERMMatthew Heon2018-02-06
| | | | | | | | | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #299 Approved by: rhatdan
* | Add podman search commandumohnani82018-02-06
|/ | | | | | | | | | | | | podman search queries a registry for a matching image and prints the output. I added a new flag called "registry" giving the user the option to search a specific registry if they don't want to search all their default registries. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #241 Approved by: rhatdan
* sysfs should be mounted rw for privilegedbaude2018-02-06
| | | | | | | | | sysfs should be mounted rw for a privileged container. Signed-off-by: baude <bbaude@redhat.com> Closes: #279 Approved by: rhatdan
* Deprecate --format for podman topbaude2018-02-05
| | | | | | | | | | | | | | | | | | | Issue #169 describes a common failure when running podman top where if the commands inside the container container a space in them, podman will panic. This was occuring because we take the output from ps and attempt to format it nicely for output and things like JSON. Given that this cannot be predicted or dealt with programatically, the decision was made to deprecate the format switch and simply output what ps provides us. Migrated top integration tests to ginkgo. Resolves Issue: https://github.com/projectatomic/libpod/issues/169 Signed-off-by: baude <bbaude@redhat.com> Closes: #291 Approved by: rhatdan
* Allow users to specify logpathDaniel J Walsh2018-02-03
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #135 Approved by: mheon
* Migrate Create|Commit to ginkgobaude2018-02-02
| | | | | | | | | | | | Migrate create and commit bats tests to the ginkgo test suite. In doing so, some structures had to be moved to pkg/podmanstructs/podmanstructs.go so we could do better verification of test results. Signed-off-by: baude <bbaude@redhat.com> Closes: #286 Approved by: rhatdan
* Merge pull request #282 from randomvariable/fix/sandboxDaniel J Walsh2018-02-02
|\ | | | | Set default configuration container type annotation to sandbox
| * Set default configuration container type annotation to sandboxNaadir Jeewa2018-02-01
| | | | | | | | | | | | | | | | This allows podman to provide sufficient hints to start containers with Intel Clear Containers: https://github.com/clearcontainers/runtime/blob/master/docs/architecture/architecture.md#oci-annotations Signed-off-by: Naadir Jeewa <naadir@randomvariable.co.uk>
* | Fix --cert-dir path for podman loginumohnani82018-02-02
| | | | | | | | | | | | | | | | | | | | | | podman login would add on the registry name to the cert-dir path making containers/image look in a directory that did not exist for certificates. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #283 Approved by: rhatdan
* | Add authfile, cert-dir and creds params to buildTomSweeneyRedHat2018-02-01
| | | | | | | | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #280 Approved by: mheon
* | Implment network == nonebaude2018-01-31
|/ | | | | | | | | | When network == none, the container should only have a loopback interface and that's it. Signed-off-by: baude <bbaude@redhat.com> Closes: #176 Approved by: baude
* Ginkgo Tests: ps, pull, push and rmbaude2018-01-31
| | | | | | | | | | | | | Migrate ps, pull, push, and rm from bats to ginkgo. Also, fixed a conditional issue with adding ports when an image defines the port and the user wants to override it. Signed-off-by: baude <bbaude@redhat.com> Closes: #277 Approved by: baude
* Add StopWithTimeout API function for containersMatthew Heon2018-01-30
| | | | | | | | | | Normal Stop should not need a timeout, and should use the default Add a function that does accept a timeout aside it Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #272 Approved by: rhatdan
* Honor storage-driver flagMatthew Heon2018-01-29
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Remove libkpod. Replace runtime generation function.Matthew Heon2018-01-29
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Fix tab issue with --format flagumohnani82018-01-27
| | | | | | | | | | | When the Go template was given with \t in between fields, the \t was not being recognized as a tab. Fixes that issue. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #265 Approved by: rhatdan
* Save --privileged stateDaniel J Walsh2018-01-25
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #255 Approved by: mheon
* Fix podman stats based on QE feedbackumohnani82018-01-25
| | | | | | | | | | | | QE found issues with formatting the go template and the man page was lacking information. Changed the format of the output to match latest docker. Add shortID function that returns the truncated ID Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #258 Approved by: rhatdan
* Fixed Created At and Running For valueumohnani82018-01-25
| | | | | | | | | | | | Changed the Created At value to match the format of docker ps and fixed the value for Running For to reflect the time elapsed since the container has been started. Initially it was showing the time elapsed since the container was created. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #257 Approved by: rhatdan
* Fix issue with order of flagsumohnani82018-01-25
| | | | | | | | | | The order of the flags was casuing issue. Enabled SkipArgReorder to fix the problem. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #259 Approved by: rhatdan
* Merge pull request #252 from baude/portDaniel J Walsh2018-01-24
|\ | | | | podman port
| * podman portbaude2018-01-23
| | | | | | | | | | | | | | | | | | | | | | podman port reports the port mappings per container. it can be used to report the ports ofa single container or latest container or all containers. in the case of a single container, the user can add an option filter for port and protocol. Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #251 from baude/psbatchDaniel J Walsh2018-01-23
|\ \ | | | | | | Use batched operations in ps
| * | Use batched operations in psbaude2018-01-22
| | | | | | | | | | | | | | | | | | | | | | | | Because the podman ps command has to collection a lot of information from various places, many of which are controlled by locks, it is a good candidate for doing batch operations under a single lock. Signed-off-by: baude <bbaude@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-28 18:01:23 +0000