aboutsummaryrefslogtreecommitdiff
path: root/contrib/spec/podman.spec.in
Commit message (Collapse)AuthorAge
* add kubernetes pauseValentin Rothberg2021-10-26
| | | | | | | | | | | Add the k8s pause binary to `pause/pause.c` and do the plumbing in the Makefile to install it in $libexec/podman/pause/pause. It is intended to replace the k8s pause image and hence the need for network connectivity when creating pods. [NO NEW TESTS NEEDED] since it will be tested in a following commit. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* rootlessport: reduce memory usage of the processPaul Holzinger2021-10-12
| | | | | | | | | | | | | | | | | | | | | | Don't use reexec for the rootlessport process, instead make it a separate binary to reduce the memory usage. The problem with reexec is that it will import all packages that podman uses and therefore loads a lot of stuff into the heap. The rootlessport process however only needs the rootlesskit library. The memory usage is a concern since the rootlessport process will spawn two process per container which has ports forwarded. The processes stay until the container dies. On my laptop the current reexec version uses 47800 KB RSS. The new separate binary only uses 4540 KB RSS. This is more than a 90% improvement. The Makefile has been updated to compile the new binary and install it to the libexec directory. Fixes #10790 [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Unit files: Use actual installed path for podmanEd Santiago2021-10-12
| | | | | | | | | | | | | | | | | | | | | Don't hardcode /usr/bin/podman in unit files: instead, use template files with a path replaced at install time. Because 'make' can be invoked repeatedly, with different PREFIX, do not leave the generated files behind in our work directory: wipe them immediately after install. To get this to work, fix a longstanding bug in podman.spec.in, a PREFIX that should've been DESTDIR. Side note: #7023 made contrib/systemd/user a symlink to .../system but did not update paths in Makefile. The unrelated-looking path change you see here is a belated correction for that. Fixes: #10787 Signed-off-by: Ed Santiago <santiago@redhat.com>
* Makefile: remove install.cniLokesh Mandvekar2021-06-28
| | | | | | | We no longer need to install /etc/cni/net.d/87-podman-bridge.conflist so install.cni isn't needed either. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Restart all containers with restart-policy=always on bootBoaz Shuster2021-06-13
| | | | | | | * Add podman-restart systemd unit file and add it to podman RPM package * Fix podman start to filter all containers + unit test Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
* Version bump: 3.3.0-devLokesh Mandvekar2021-06-07
| | | | | | Keep master branch version ahead of that on any other branch. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Fix build with GO111MODULE=offLokesh Mandvekar2021-04-15
| | | | | | | | | | | | | | | | | | | | Distro builds on Fedora and Kubic projects use GO111MODULE=off by default which are currently failing. This commit fixes it and going forward, podman CI will also indicate failures in rpm builds. The additional LDFLAGS have been removed from the spec file which is not ideal. But, currently we only use the spec file to check if the rpm builds fine. We can fix the LDFLAGS in a later commit when we're working on packit integration. conmon build has also been removed from podman.spec.in because the COPR for which it was provided has been discontinued. [NO TESTS NEEDED] Fixes: #10009 Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Bump to v3.2.0-devMatthew Heon2021-03-29
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Bump to v3.1.0-devMatthew Heon2021-03-08
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Bump to v3.1.0-rc1v3.1.0-rc1Matthew Heon2021-03-08
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* hardening flags for fedora rpmbuildsLokesh Mandvekar2021-02-09
| | | | | | | | | | | This commit sets the CGO_CFLAGS variable for hardening the Fedora rpm binaries. The flags used are the same as those in the official Fedora rpms. Setting the flags in upstream spec would provide early warnings for flag adjustments or other hardening issues. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Fix support for rpmbuild < 4.12.0.Thomas Montague2020-12-18
| | | | Signed-off-by: Thomas Montague <montague.thomas@gmail.com>
* Merge pull request #8400 from rhatdan/varlinkOpenShift Merge Robot2020-12-01
|\ | | | | Remove varlink support from podman
| * Remove varlink support from PodmanDaniel J Walsh2020-11-26
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Bump master to v3.0.0-devMatthew Heon2020-11-30
|/ | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Install the new shell completion logicPaul Holzinger2020-11-12
| | | | | | | | | | | | | | | Add a new make target (completion) to generate the shell completion scripts. This will generate the scripts for bash, zsh and fish for both podman and podman-remote with `podman completion`. The scripts are put into the completions directory and can be installed system wide with `sudo make install.completions`. This commit replaces the current handwritten scripts for bash and zsh. The `validate.completion` target has been adjusted to make sure nobody edits these scripts directly. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Use /tmp/podman-run-* for backup XDG_RUNTIME_DIRDaniel J Walsh2020-11-04
| | | | | | | We need to block systemd from cleaning up this directory by dropping a /usr/lib/tmpfiles.d/podman.conf file in place. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Bump to v2.2.0-devMatthew Heon2020-09-22
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* add xz as a recommended pkgJob Cespedes2020-08-11
| | | | | | | | xz package is required by buildah and podman when building a image and ADD a tar.xz file archive is used See https://github.com/containers/buildah/issues/2525 Signed-off-by: Job Cespedes Ortiz <jobcespedes@gmail.com>
* Install auto-update services for usersValentin Rothberg2020-08-03
| | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix test failure regarding unpackaged files.Peter Oliver2020-08-03
| | | | Signed-off-by: Peter Oliver <git@mavit.org.uk>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Bump master to v2.1.0-dev following release of v2.0Matthew Heon2020-06-19
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Fix builds for RDODaniel J Walsh2020-06-11
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* RHEL8 and Centos8 don't have oci-runtime yetDaniel J Walsh2020-06-03
| | | | | | | For the time being we need to just require runc this should fix rdoproject.org/github-check Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Bump Conmon in COPR specMatthew Heon2020-06-02
| | | | | | We need 2.0.17 for detached remote exec. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* default build without `varlink` tagLokesh Mandvekar2020-05-29
| | | | | | | | | | | | | Issue gh#6286 was already fixed in a prior commit but the Makefile still ran some varlink steps by default. This commit makes any varlink build steps dependent on the varlink build tag and also makes the contrib rpm spec file independent of varlink. Endpoint tests will be run only if BUILDTAGS contains varlink. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Default podman.spec to use crunDaniel J Walsh2020-05-14
| | | | | | | On systems with cgroupV2 runc will not currently work switch the default in spec file to use crun. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* [CI:DOCS]remove libpod.conf from specBrent Baude2020-05-13
| | | | | | in the contrib rpm.spec.in, we no longer should try to package libpod.conf Signed-off-by: Brent Baude <bbaude@redhat.com>
* Remove libpod.conf from repoMatthew Heon2020-05-12
| | | | | | | | | | | Now that we're shipping containers.conf, we don't want to provide a libpod.conf anymore. This removes libpod.conf from the repo and as many direct uses as I can find. There are a few more mentions in the documentation, but someone more familiar with containers.conf should make those edits. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Makefile: include -nobuild install targetsLokesh Mandvekar2020-04-23
| | | | | | | | | | | | | | | Distro packaging often uses non-default build and linker flags. The current Makefile cannot be used in the package build process as it will end up rebuilding the binaries with the default flags. This commit introduces install targets which do not depend on the build targets. Distro packages should prefer these if they want to use any non-default flags. NOTE: This commit effectively leaves prior targets unchanged, so users won't notice any difference. Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Bump to v2.0.0-devMatthew Heon2020-04-15
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Bump to v1.9.0-devMatthew Heon2020-04-13
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Bump to v1.9.0-rc1v1.9.0-rc1Matthew Heon2020-04-13
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #5683 from larsks/bug/rpm-systemd-tagOpenShift Merge Robot2020-03-31
|\ | | | | add systemd build tag to podman builds
| * add systemd build tag to podman buildsLars Kellogg-Stedman2020-03-31
| | | | | | | | | | | | | | | | | | | | | | Without the systemd build tag, podman will fail with the error "No support for journald logging". This commit adds the `systemd` build tag explicitly, rather than relying on `hack/systemd_tag.sh` (because we're building an rpm and we've explicitly included systemd-devel as a dependency). Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
* | V2 Move varlink homeJhon Honce2020-03-30
|/ | | | | | | | * move cmd/podman/varlink/* to pkg/varlink to support podmanV2 refactor * update Makefile * reformatted all impacted code Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Add APIV2 service filesDaniel J Walsh2020-03-20
| | | | | | Also fix issue in pods_test.go Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Bump to v1.8.3-devMatthew Heon2020-03-19
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* Bump to v1.8.2-devMatthew Heon2020-03-11
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
* add epoch for specfileBrent Baude2020-02-25
| | | | | | to get the copr rpms to jive better with the fedora rpms, we need to set an epoch. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Merge pull request #5068 from baude/newimagestestOpenShift Merge Robot2020-02-11
|\ | | | | replace prow images test
| * replace prow images testBrent Baude2020-02-10
| | | | | | | | | | | | this is a container-based approach to verifying we can build an rpm based on the contrib spec. Signed-off-by: Brent Baude <bbaude@redhat.com>
* | [CI:DOCS] Update Code of Conduct to Containers variantTomSweeneyRedHat2020-02-10
|/ | | | | | | | | | As the title says. I renamed the old file from the lower case to the upper case name. This makes it appear higher up in the listing on GitHub and also is in line with the rest of the containers projects. Due to this change, I also had to change a few references in a couple of build related files. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* Bump to v1.8.1-devMatthew Heon2020-02-06
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Bump to v1.8.0-devMatthew Heon2020-01-31
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Bump to v1.8.0-rc1v1.8.0-rc1Matthew Heon2020-01-31
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* revert accidental change from codespell pr.Daniel J Walsh2020-01-13
| | | | | | This should use `od` not `of` Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add codespell to validate spelling mistakes in code.Daniel J Walsh2020-01-11
| | | | | | Fix all errors found by codespell Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Bump to v1.7.1-devMatthew Heon2020-01-06
| | | | Signed-off-by: Matthew Heon <mheon@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-28 16:02:01 +0000