aboutsummaryrefslogtreecommitdiff
path: root/contrib
Commit message (Collapse)AuthorAge
* packer: Make Makefile host arch sensitiveNitesh Konkar2019-02-18
| | | | | | | | `make localunit` fails on non-amd64 archs as it unzips packer_1.3.2_linux_amd64.zip irrespective of host arch its running on. Signed-off-by: Nitesh Konkar <niteshkonkar@in.ibm.com>
* pod infra container is started before a container in a pod is run, started, ↵Peter Hunt2019-02-15
| | | | | | | | | | or attached. Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod. Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Fix volume handling in podmanDaniel J Walsh2019-02-14
| | | | | | | | | | | | | | | | | | iFix builtin volumes to work with podman volume Currently builtin volumes are not recored in podman volumes when they are created automatically. This patch fixes this. Remove container volumes when requested Currently the --volume option on podman remove does nothing. This will implement the changes needed to remove the volumes if the user requests it. When removing a volume make sure that no container uses the volume. Signed-off-by: Daniel J Walsh dwalsh@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Cirrus: add vendor_check_taskValentin Rothberg2019-02-06
| | | | | | | | | | | * Make sure that all vendored dependencies are in sync with the code and the vendor.conf by running `make vendor` with a follow-up status check of the git tree. * Vendor ginkgo and gomega to include the test dependencies. Signed-off-by: Chris Evic <cevich@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Merge pull request #2196 from baude/toolboxDaniel J Walsh2019-02-05
|\ | | | | Changes to container runlabel for toolbox project
| * Changes to container runlabel for toolbox projectbaude2019-01-30
| | | | | | | | | | | | | | | | | | | | The toolbox project would benefit from a few changes to more closely resembe the original atomic cli project. Changes made are: * only pull image for container runlabel if the label exists in the image * if a container image does not have the desired label, exit with non-zero Signed-off-by: baude <bbaude@redhat.com>
* | Merge pull request #2213 from cevich/cirrus_imgts_containerOpenShift Merge Robot2019-02-04
|\ \ | | | | | | [skip ci] Cirrus: Container for tracking image use
| * | [skip ci] Cirrus: Container for tracking image useChris Evich2019-01-24
| | | | | | | | | | | | | | | | | | | | | Once built, this container can be utilized by automation to help keep track of VM images. All parameters are passed in via env. vars. Signed-off-by: Chris Evich <cevich@redhat.com>
* | | Cirrus: Add RHEL-7 testingChris Evich2019-01-30
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | Add necessary tweaks to base-image build/import process so that image can successfully boot with networking enabled. Build the base image and update ``.cirrus.yml`` accordingly. Also make a minor improvement to cache-image building to help save space in GCP image storage. Namely, instead of storing every produced image, export them into google storage buckets w/ life-cycle enabled. For production use, they may be converted back into GCE images, otherwise they will expire after a time. Signed-off-by: Chris Evich <cevich@redhat.com>
* | Cirrus: Enable AppArmor build and testChris Evich2019-01-29
|/ | | | | | | | | This was specifically disabled early on in transitioning to cirrus due to an excessive number of test failures and lack of knowledge. This commit reverses the stance and unifies build and test commands across all current platforms. Signed-off-by: Chris Evich <cevich@redhat.com>
* cirrus: Record start/end time of important thingsChris Evich2019-01-17
| | | | | | | | | | | | | Previously we only reported the date/time at the beginning of a run since it's not available in the Cirrus-CI system. This commit generalizes the solution, recording start/end times for all major events. Also the timestamps are recorded into a local file on the VMs. This is intended for future use, for example tracking execution-time trends. Signed-off-by: Chris Evich <cevich@redhat.com>
* Run integrations test with remote-clientbaude2019-01-14
| | | | | | | | | | | | Add the ability to run the integration (ginkgo) suite using the remote client. Only the images_test.go file is run right now; all the rest are isolated with a // +build !remotelinux. As more content is developed for the remote client, we can unblock the files and just block single tests as needed. Signed-off-by: baude <bbaude@redhat.com>
* Update master branch with v1.0 changes from 1.0 branchMatthew Heon2019-01-14
| | | | | | | Grab release notes, changelog, and version changes so master is up to date. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2119 from jwhonce/wip/python_podmanOpenShift Merge Robot2019-01-10
|\ | | | | Move python code from contrib to it's own repo python-podman
| * Move python code from contrib to it's own repo python-podmanJhon Honce2019-01-10
| | | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Merge pull request #2129 from cevich/timestampOpenShift Merge Robot2019-01-10
|\ \ | |/ |/| Cirrus: (Minor) Print timestamp
| * (Minor) Cirrus: Print timestamp at startChris Evich2019-01-10
| | | | | | | | | | | | Also record into a file in case a later reference is required Signed-off-by: Chris Evich <cevich@redhat.com>
* | Minor: Remove redundant basename command in ooe.shChris Evich2019-01-07
|/ | | | Signed-off-by: Chris Evich <cevich@redhat.com>
* Merge pull request #2023 from rhatdan/configOpenShift Merge Robot2018-12-22
|\ | | | | Switch all references to image.ContainerConfig to image.Config
| * Switch all referencs to image.ContainerConfig to image.ConfigDaniel J Walsh2018-12-21
| | | | | | | | | | | | This will more closely match what Docker is doing. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | cirrus: Use updated images including new cruiChris Evich2018-12-21
|/ | | | | | | Also add two minor tweaks which were preventing images from building properly. Signed-off-by: Chris Evich <cevich@redhat.com>
* Use existing CRIU packages in CI setupAdrian Reber2018-12-21
| | | | | | | | | | | | For all in testing involved distribution a new enough CRIU exists as a package. Fedora provides CRIU packages directly. For CentOS/RHEL there is a COPR with the latest CRIU version and for Ubuntu there is a PPA for the latest CRIU version. Let's use these packages and fall back to building from git if necessary. Signed-off-by: Adrian Reber <adrian@lisas.de>
* Merge pull request #1757 from kunalkushwaha/contrib-perftestOpenShift Merge Robot2018-12-20
|\ | | | | perf test a stress test to profile CPU load of podman
| * perf test a stress test to profile CPU load of podmanKunal Kushwaha2018-12-19
| | | | | | | | Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
* | prepare for move to validate on 1.11 onlybaude2018-12-19
|/ | | | Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #2022 from baude/flakeflakeOpenShift Merge Robot2018-12-18
|\ | | | | all flakes must die
| * all flakes must diebaude2018-12-18
| | | | | | | | | | | | | | when cleaning up after a test, don't fail if cleanup doesn't run perfectly. Signed-off-by: baude <bbaude@redhat.com>
* | Cirrus: One IRC notice onlyChris Evich2018-12-18
|/ | | | | | | | | The podbot messages are becoming obnoxious as more distributions are tested. Only call the `success.sh` script once, after all testing was successful. Also make update the message to include more helpful text and url. Signed-off-by: Chris Evich <cevich@redhat.com>
* Merge pull request #2010 from cevich/cirrus_editorsDaniel J Walsh2018-12-17
|\ | | | | Cirrus: Add text editors to cache-images
| * Cirrus: Add text editors to cache-imagesChris Evich2018-12-14
| | | | | | | | | | | | | | | | | | | | Occasionally people need to access the VM's for troubleshooting/debugging. Having an editor pre-installed makes life easier and doesn't cost any extra test-time. ***CIRRUS: REBUILD IMAGES*** Signed-off-by: Chris Evich <cevich@redhat.com>
* | Add script to create CI VMs for debuggingChris Evich2018-12-14
| | | | | | | | | | | | | | | | | | | | | | | | Frequently debugging of CI-related problems requires going hands-on within the environment. However, reproducing the environment by hand is very tedious and error prone. This script permits authorized users to produce VM's based on any available cache-image, and automatically remove them upon logout. Also: Bump up VM disk sizes to 200GB due to performance reasons Signed-off-by: Chris Evich <cevich@redhat.com>
* | Cirrus: Migrate PAPR testing of F28 to CirrusChris Evich2018-12-14
|/ | | | | | | | | | | Since the most recent TWO versions of Fedora are officially supported upstream, both need to be tested. Implement the concept of a 'prior' Fedora release in both base-image and cache-image production. Utilize the produced cache-image to test libpod. Remove F28 testing from PAPR. Much thanks to @baude @giuseppe for help with this. Signed-off-by: Chris Evich <cevich@redhat.com>
* Fix documentation links and flowChris Evich2018-12-12
| | | | Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Update base-image build docsChris Evich2018-12-10
| | | | | | | Mostly minor tweaks and clarifications. Though there was one missing (required) make value I fixed. Signed-off-by: Chris Evich <cevich@redhat.com>
* Merge pull request #1893 from jwhonce/bug/1869OpenShift Merge Robot2018-12-07
|\ | | | | Refactor CLI booleans to be consistent and defined behavior
| * Refactor BooleanAction to mimic golang interfaceJhon Honce2018-12-05
| | | | | | | | | | | | | | | | | | | | * Change all store_true or store_false to use store_bool. New behavior documented in BooleanAction docstring. * Remove any extraneous code identified by pylint in files from above. Fixes #1869 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Merge pull request #1788 from cevich/cirrus_base_imagesOpenShift Merge Robot2018-12-07
|\ \ | | | | | | Codify and document base-image production + Enable testing with Fedora
| * | Cirrus: Document and codify base-image productionChris Evich2018-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of images required for future testing are not present in GCE. Importing them is a long proscribed process prone to errors and complications. Improve this situation by documenting, and encoding the majority of the steps required. Due to the required complexity, these are clearly identified as 'semi-automated'. This means a discerning eye is sometimes needed to address unforeseen problems (networking issues, format or packaging changes, etc). Nevertheless, having these steps in writing, will reduce current and future maintenance burden while supporting future testing needs of RHEL, Fedora and Fedora Atomic Host. Also: * Add necessary configuration, scripts, and Makefile updates needed to prepare RHEL, Fedora, & FAH cloud images for use in GCE. This is a complex, multi-step process where the cloud image is booted un a local user-mod qemu-kvm instance, where it can be modified. From there, it's converted into a specific format, and imported into GCE. Lastly, the imported raw disk data is made available as a GCE VM image. Note: As of this commit, the RHEL base-image builds (CentOS has native image), however neither RHEL or CentOS cache-images build correctly. * Left testing on FAH disabled, the GCE/Cirrus integration needs needs more work. Specifically, the python3-based google startup script service throws a permission-denied (as root) when trying to create a temp. directory. Did not investigate further, though manually running the startup script does allow the libpod tests to start running. * Enabled Fedora 29 image to execute tests and general use. * Utilize the standardized F28-based container image for gating of more the intensive unit and integration testing. Update documentation to reflect this as the standard platform for these checks. Rename tasks with shorter names and to better reflect their purpose. * Cirrus: Trim unnecessary env vars before testing since the vast majority are only required for orchestration purposes. Since most are defined within `.cirrus.yml`, it's a good place to store the list of undesirables. Since each of the cirrus-scripts runs in it's own shell, unsetting these near the end will have no consequence. Also trim down the number of calls to show_env_vars() Signed-off-by: Chris Evich <cevich@redhat.com>
| * | Cirrus: Use Makefile for image-buildingChris Evich2018-12-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The packer tool takes JSON as input for the details of producing VM images to be used for PR CI-testing. JSON is not a very human-friendly format, without support for comments and frequently containing lots of duplicate data. Fix this by using a Makefile + simple python one-liner to convert from a human-friendly YAML format into packer-native JSON. This allows use of anchors/aliases to reduce duplication, and allows inline comments for easier maintainability. This also allows separating the 'test' action from the 'build' action, for earlier and better syntax problem detection. Lastly, there are some minor ``lib.sh`` and ``integration_test.sh`` updates to support future work, and slightly improve the build and test environments. Signed-off-by: Chris Evich <cevich@redhat.com>
* | | Bump to v0.12.2-devMatthew Heon2018-12-06
| | | | | | | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* | | Bump to v0.12.1v0.12.1Matthew Heon2018-12-06
|/ / | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* / Invert tlsverify default in APIJhon Honce2018-12-05
|/ | | | | | Fixes #1929 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Merge pull request #1894 from jwhonce/bug/1876OpenShift Merge Robot2018-12-04
|\ | | | | Only include container SizeRootFs when requested
| * Only include container SizeRootFs when requestedJhon Honce2018-11-28
| | | | | | | | | | | | | | | | * API always returns value, so we remove it if not asked for Fixes #1876 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | tests: always install runc on UbuntuGiuseppe Scrivano2018-12-01
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | cirrus: make apt noninteractiveGiuseppe Scrivano2018-11-30
| | | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | pypod create/run: ignore args for container commandEd Santiago2018-11-28
|/ | | | | | | | | | | | | Don't try to argparse command-line arguments on the right-hand side of the image; those are intended for the container command: pypodman create fedora ls -l pypodman run fedora find / -name foo pypodman run fedora bash -c 'echo hi' If/when `pypodman exec` gets implemented, it should use this too. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #1851 from jwhonce/wip/cmdOpenShift Merge Robot2018-11-28
|\ | | | | Add support for --all in pypodman ps command
| * Add support for --all in pypodman ps commandJhon Honce2018-11-28
| | | | | | | | | | | | | | | | * Updated field widths to match changes in go code Fixes #1654 Signed-off-by: Jhon Honce <jhonce@redhat.com>
* | Merge pull request #1885 from edsantiago/split_token_noneOpenShift Merge Robot2018-11-28
|\ \ | | | | | | _split_token(): handle None
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 08:56:56 +0000