| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
| |
Add a new flag to set the ipam-driver. Also adds a new ipam driver none
mode which only creates interfaces but does not assign addresses.
Fixes #13521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Command flags (OPTIONS) in man pages have to date been in
haphazard order. Sometimes that order is sensible, e.g.,
most-important options first, but more often they're
just in arbitrary places. This makes life hard for users.
Here, I update the man-page-check Makefile script so it
checks and enforces alphabetical order in OPTIONS sections.
Then -- the hard part -- update all existing man pages to
conform to this requirement.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
| |
The example is also improved to add the --subnet option, this option is required with netavark, else you get:
Error: macvlan driver needs at least one subnet specified, DHCP is not supported with netavark
Signed-off-by: Clayton Craft <clayton@craftyguy.net>
|
| |
|
|
|
|
|
| |
Add some docs about the different network backends. Also remove the CNI
word from network since we refer to either a netavark or CNI config.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
| |
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
Add support for the ipvlan cni plugin. This allows us to create,
inspect and list ipvlan networks correctly.
Fixes #10478
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
| |
Support setting the macvlan mode with `podman network create -d macvlan
--opt mode=bridge`. This will correctly set the specified macvlan mode
in the cni conflist file.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The macvlan driver is not deprecated, only the --macvlan flag is.
Remove the flag from the man page since it is deprecated and add a
warning to podman network create if it is used.
[NO TESTS NEEDED]
Fixes #11400
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
crun 0.20.1 changed an error message that we relied on. Deal
with it by accepting the old and new message.
Also (unrelated): sneak in some doc fixes to get rid of
nasty go-md2man warnings that have crept into man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
| |
Commit 800a2e2d35 introduced a way to disable the conversion of `--`into
an en dash on docs.podman.io, so the ugly workaround of escaping the
dashes is no longer necessary.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Escape the two dashes, otherwise they are combined into one long dash.
I tested that this change is safe and still renders correctly on github
and with the man pages.
This commit also contains a small change to make it build locally.
Assuming you have the dependencies installed you can do:
```
cd docs
make html
```
Preview the html files in docs/build/html with
`python -m http.server 8000 --directory build/html`.
Fixes containers/podman.io#373
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Backstory: every time you run 'make podman' or even
just 'make', you get a full recompile. This is sub-ideal.
Cause: I don't really know. It looks complicated. #5017
introduced a .PHONY for bin/podman, for reasons not
explained in the PR. Then, much later, #5880 well-
intentionedly but improperly tweaked the 'find'
command used in defining SOURCES, adding a -prune
but without the corresponding and required -print.
Let's just say, it was an unfortunate cascade of events.
This PR fixes the SOURCES definition and removes the
highly-undesired .PHONY from podman & podman-remote,
making it so you can type 'make' and, oh joy, not
build anything if it's current. The way 'make' is
supposed to work.
Why fix this now? Because my PR (#9209) was failing in CI,
in the Validate step:
Can't exec "./bin/podman": No such file or directory at hack/xref-helpmsgs-manpages line 223.
It failed even on Re-run, and only passed once I force-pushed
the PR (with no changes, just a new commit SHA). I have no idea
why bin/podman wasn't built, and I have zero interest in pursuing
that right now, but the proper solution is to add bin/podman as
a Makefile dependency for that particular test. So done.
While I'm at it, fix what is pretty clearly a typo in a .PHONY
And, finally, fix a go-md2man warning introduced in #9189
[NO TESTS NEEDED]
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
instead of using the --macvlan to indicate that you want to make a
macvlan network, podman network create now honors the driver name of
*macvlan*. Any options to macvlan, like the parent device, should be
specified as a -o option. For example, -o parent=eth0.
the --macvlan option was marked as deprecated in the man page but is
still supported for the duration of 3.0.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
| |
when doing a network creation, the dnsname plugin should be disabled
when the --internal bool is set. a warning is displayed if this
happens and docs are updated.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
| |
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
|
| |
|
|
| |
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add label support for podman network create. Use the `args`
field in the cni config file to store the podman labels.
Use `podman_labels` as key name and store the labels as
map[string]string.
For reference: https://github.com/containernetworking/cni/blob/master/CONVENTIONS.md#args-in-network-config
https://github.com/containernetworking/cni/blob/spec-v0.4.0/SPEC.md#network-configuration
Example snippet:
```
...
"args": {
"podman_labels": {
"key1":"value1",
"key2":"value2"
}
}
...
```
Make podman network list support several filters. Supported filters are name,
plugin, driver and label. Filters with different keys work exclusive. Several label
filters work exclusive and the other filter keys are working inclusive.
Also adjust the compat api to support labels in network create and list.
Breaking changes:
- podman network ls -f shortform is used for --filter instead --format
This matches docker and other podman commands (container ps, volume ps)
- libpod network list endpoint filter parameter is removed. Instead the
filters paramter should be used as json encoded map[string][]string.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
| |
Make the order of short and long flag names in the documentation
consistent. Also adjust the man page validaten script to only allow
the `**--long**, **-s**` syntax.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Somewhere in the CIv2 migration we lost the man page vs --help
cross-checker. Add it back, by adding it into the man-page-check
Makefile target; this is part of 'make validate', which is run
in CI even on CI:DOCS PRs.
As happens when CI doesn't run, things broke. Man pages got out
of sync with --help. This PR:
1) Fixes hack/xref-helpmsgs-manpages to deal with the new
"Options" (instead of "Flags") form of podman help. #8034
did part of that, but one of my review comments was
accidentally left out.
2) Fixes hack/xref-helpmsgs-manpages to deal with the new
option syntax in man pages, post- #8292, in which each
option is preceded by four hashes so as to make them
HTML <h4> elements with named anchors.
3) Fixes man pages that #8292 accidentally missed.
4) Adds man page entries for two flags that got added
to podman but not documented (pod create --network-alias,
play kube --log-driver)
Fixes: #8296
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Change the docs markdown so that flag names will be h4 headers.
Sphinx will automatically add anchors to headers. Add css to
make sure the flag names are not to big compared to the text.
The man pages also still renders fine but it looks a bit different.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
enable the ipv6 flag in podman network to be able to create
dual-stack networks for containers.
This is required to be compatible with docker, where --ipv6
really means dual stack.
podman, unlike docker, support IPv6 only containers since
07e3f1bba9674c0cb93a0fa260930bfebbf75728.
Signed-off-by: Antonio Ojea <aojea@redhat.com>
|
| |
|
|
| |
Signed-off-by: Eduardo Minguez Perez <e.minguez@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I wrote a script to cross-reference podman --help against
man pages. It found a bunch of inconsistencies fix them:
* options missing from man pages
* options misspelled or misformatted in man pages (usually
misplaced asterisks or missing dashes, but see --dns-opt)
* one spurious comma in the actual source file --help
This is a fix in which I iterate over 'podman CMD --help'
and check for presence in man pages. The other way around
(look for flags in man pages, check podman CMD --help)
is probably impossible: there are too many special cases
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
| |
add the ability to a macvlan network with podman network create.
Signed-off-by: baude <bbaude@redhat.com>
|
|
|
* Refactored code and Makefile to support new docs layout
* Removed some old code packaging code
* Add Readme.md to document what we're doing
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: baude <bbaude@redhat.com>
|
