| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
| |
added support for pod wide sysctls. The sysctls supported are the same as the continer run controls.
These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl
resolves #12747
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |\
| |
| | |
Pod Security Option support and Infra Inheritance changes
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves #12173
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
Add the --ipv6 flag to podman create/run and pod create. We support the
--network name:ip6=<ip> syntax now but for docker compat we should also
support the --ip6 flag.
Note that there is no validation if the ip is actually a v6 or v4 address
because the backend does not care either.
Fixes #7511
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes #11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
| |
added support for a volumes from container. this flag just required movement of the volumes-from flag declaration
out of the !IsInfra block, and minor modificaions to container_create.go
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
added the option for the user to specify a rate, in bytes, at which they would like to be able
to read from the device being added to the pod. This is the first in a line of pod device options.
WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
| |
Adds a note about the limitation of network aliases to the man pages
This should satisfy https://issues.redhat.com/browse/RUN-1189
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Standardize on no-trunc through the code.
Alias notruncate where necessary.
Standardize on the man page display of no-trunc.
Fixes: https://github.com/containers/podman/issues/8941
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves #10379
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |\
| |
| | |
[CI:DOCS] Document source ip for the rootlesskit port handler
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Also add some missing options to podman pod create.
Fixes #10884
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
| |
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
|
| |
|
|
|
|
|
|
| |
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
|
| |
|
|
|
|
|
|
|
|
| |
crun 0.20.1 changed an error message that we relied on. Deal
with it by accepting the old and new message.
Also (unrelated): sneak in some doc fixes to get rid of
nasty go-md2man warnings that have crept into man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
| |
Commit 800a2e2d35 introduced a way to disable the conversion of `--`into
an en dash on docs.podman.io, so the ugly workaround of escaping the
dashes is no longer necessary.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
| |
Once we settle on the wording for short-names in podman-pull, I will
add the same section to all of the podman commands that use pull.
Also ran through all man pages with a spell checker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Currently we have rootless users who want to leak their groups access
into containers, but this group access is only able to be pushed in by
a hard to find OCI Runtime annotation. This PR makes this option a lot
more visable and hides the complexity within the podman client.
This option is only really needed for local rootless users. It makes
no sense for remote clients, and probably makes little sense for
rootfull containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Escape the two dashes, otherwise they are combined into one long dash.
I tested that this change is safe and still renders correctly on github
and with the man pages.
This commit also contains a small change to make it build locally.
Assuming you have the dependencies installed you can do:
```
cd docs
make html
```
Preview the html files in docs/build/html with
`python -m http.server 8000 --directory build/html`.
Fixes containers/podman.io#373
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
| |
Make the order of short and long flag names in the documentation
consistent. Also adjust the man page validaten script to only allow
the `**--long**, **-s**` syntax.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Somewhere in the CIv2 migration we lost the man page vs --help
cross-checker. Add it back, by adding it into the man-page-check
Makefile target; this is part of 'make validate', which is run
in CI even on CI:DOCS PRs.
As happens when CI doesn't run, things broke. Man pages got out
of sync with --help. This PR:
1) Fixes hack/xref-helpmsgs-manpages to deal with the new
"Options" (instead of "Flags") form of podman help. #8034
did part of that, but one of my review comments was
accidentally left out.
2) Fixes hack/xref-helpmsgs-manpages to deal with the new
option syntax in man pages, post- #8292, in which each
option is preceded by four hashes so as to make them
HTML <h4> elements with named anchors.
3) Fixes man pages that #8292 accidentally missed.
4) Adds man page entries for two flags that got added
to podman but not documented (pod create --network-alias,
play kube --log-driver)
Fixes: #8296
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Change the docs markdown so that flag names will be h4 headers.
Sphinx will automatically add anchors to headers. Add css to
make sure the flag names are not to big compared to the text.
The man pages also still renders fine but it looks a bit different.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
| |
flag --network=slirp4netns[options] for root and rootless pods
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
|
|
|
|
| |
When running "podman pod create --share user" the errors appears:
Error: User sharing functionality not supported on pod level
Fix docs and remove 'user' from shareable parameters.
Signed-off-by: Sagi Shnaidman <sshnaidm@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a `--replace` flag to the `pod create` command. If another pod with
the same name already exists, it will be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a pod may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Note that the `--replace` flag does not require the `--name` flag to be
set, so it can be set unconditionally in `podman generate systemd`.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I wrote a script to cross-reference podman --help against
man pages. It found a bunch of inconsistencies fix them:
* options missing from man pages
* options misspelled or misformatted in man pages (usually
misplaced asterisks or missing dashes, but see --dns-opt)
* one spurious comma in the actual source file --help
This is a fix in which I iterate over 'podman CMD --help'
and check for presence in man pages. The other way around
(look for flags in man pages, check podman CMD --help)
is probably impossible: there are too many special cases
Signed-off-by: Ed Santiago <santiago@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enables most of the network-related functionality from
`podman run` in `podman pod create`. Custom CNI networks can be
specified, host networking is supported, DNS options can be
configured.
Also enables host networking in `podman play kube`.
Fixes #2808
Fixes #3837
Fixes #4432
Fixes #4718
Fixes #4770
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
|
|
* Refactored code and Makefile to support new docs layout
* Removed some old code packaging code
* Add Readme.md to document what we're doing
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: baude <bbaude@redhat.com>
|
