summaryrefslogtreecommitdiff
path: root/docs
Commit message (Collapse)AuthorAge
* Allow podman start to attach to a running containerbaude2018-04-18
| | | | | | | | | | If a container is already running, and a user asks to start it -a (attach), we should honor this and attach to the container. Signed-off-by: baude <bbaude@redhat.com> Closes: #634 Approved by: baude
* regression: tls verify should be set on registries.conf if insecurebaude2018-04-18
| | | | | | | | | | | In the case where podman needs to pull an image, if that registry that the image resides on is known to be insesure (as defined in /etc/containers/registries.conf), tls-verify should be altered on the fly. Signed-off-by: baude <bbaude@redhat.com> Closes: #626 Approved by: mheon
* Modify diff and inspect docsumohnani82018-04-17
| | | | | | | | | | | | Format the examples in podman-diff.md better. The description for --type in the inspect docs was slightly different from that in the inline help. Also stated what values to use in the Go template for the --format flag. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #620 Approved by: mheon
* Use buildah commit for podman commitbaude2018-04-10
| | | | | | | | Resolves: #586 and #520 Signed-off-by: baude <bbaude@redhat.com> Closes: #592 Approved by: mheon
* Add conmon-pidfile flag to bash completions/manpagesMatthew Heon2018-04-03
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #584 Approved by: rhatdan
* Add files section to podman man pageDaniel J Walsh2018-03-26
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #536 Approved by: TomSweeneyRedHat
* Small manpage rewordMatthew Heon2018-03-23
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #533 Approved by: baude
* Document .containerenv in manpages. Move it to /run.Matthew Heon2018-03-23
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #533 Approved by: baude
* Merge pull request #447 from mheon/sig_proxyDaniel J Walsh2018-03-16
|\ | | | | Add signal proxying to podman run and attach
| * Add signal proxying to podman run, start, and attachMatthew Heon2018-03-15
| | | | | | | | | | | | | | Also removes sig-proxy from 'podman create', where is does not make sense. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* | Add restart to main podman manpageMatthew Heon2018-03-16
| | | | | | | | | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #503 Approved by: rhatdan
* | Make manpage more clearMatthew Heon2018-03-16
| | | | | | | | | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #503 Approved by: rhatdan
* | Add 'podman restart' commandMatthew Heon2018-03-16
|/ | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #503 Approved by: rhatdan
* We should not allow a user to mount a container with a different labelDaniel J Walsh2018-03-15
| | | | | | | | | We need to get the label from the container and mount with it. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #502 Approved by: mheon
* Remove references to container restart on create/run commandDaniel J Walsh2018-03-14
| | | | | | | | | | podman does not support autorestart. Should use systemd if you want containers to restart Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #487 Approved by: edsantiago
* Merge pull request #471 from TomSweeneyRedHat/dev/tsweeney/podmanmanMatthew Heon2018-03-12
|\ | | | | Update commands section to a table and add missing commands
| * Update commands section to a table and add missing commandsTomSweeneyRedHat2018-03-10
| | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* | Remove crio.conf references from manpagesMatthew Heon2018-03-12
|/ | | | | | | | | Also changes a few docker-login references to podman-login. Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #473 Approved by: rhatdan
* podman import, load, and commit are too verbosebaude2018-03-07
| | | | | | | | | | | | | | | The progress should not be show for import, load, and commit. It makes machine parsing of the output much more difficult. Also, each command should output an image ID or name for the user. Added a --verbose flag for users that still want to see progress. Resolves issue #450 Signed-off-by: baude <bbaude@redhat.com> Closes: #456 Approved by: rhatdan
* Add buildah bud options from common.goTomSweeneyRedHat2018-03-06
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #453 Approved by: rhatdan
* docs: podman-top: fix nonworking exampleEd Santiago2018-03-06
| | | | | | | | | | | | | | | | | | (minor) One example in the podman-top man page results in an error when actually invoked: unable to find PID field in ps output. try a different set of ps arguments Cause: commit 6cb1c31d (PR #400) has to check PIDs in order to filter those in the container. Solution: add 'pid' to the list of requested output fields in the sample command. Signed-off-by: Ed Santiago <santiago@redhat.com> Closes: #457 Approved by: rhatdan
* docs/podman-info.1.md update man pagebaude2018-03-01
| | | | | | | | | | update man page with example outputs. tidy up the man page where applicable. Signed-off-by: baude <bbaude@redhat.com> Closes: #429 Approved by: rhatdan
* (minor) correct misspellings in man pagesEd Santiago2018-02-27
| | | | | | | Signed-off-by: Ed Santiago <santiago@redhat.com> Closes: #410 Approved by: baude
* Tagging an image alias by shortnamebaude2018-02-26
| | | | | | | | | | | | | | | | | | When trying to tag an alias (tag) of an image using only the shortname and no tag, we were unable to find the image in storage. This corrects that issue and adds an integration test to protect against regression. I also updated the man page per the filed issue. While writing the integration test, I discovered that inspect could also not find a tagged image without its :tag. Resolves Issue #385 Resolves Issue #384 Signed-off-by: baude <bbaude@redhat.com> Closes: #398 Approved by: mheon
* Implement --image-volumes for create and runumohnani82018-02-22
| | | | | | | | | | | | | | --image-volumes tells podman what to do with the image volumes in the image config There are 3 options: bind, tmpfs, and ignore bind puts the volume contents in /var/lib/containers/storage/container-id/volumes/vol-dir and bind mounts it into the container at /vol-dir tmpfs mounts /vol-dir as a tmps into the container ignore doesn't mount the image volumes onto the container Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #377 Approved by: rhatdan
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* Add --time alias to manpagesMatthew Heon2018-02-21
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #375 Approved by: rhatdan
* language: correct 'vice versa' in docsEd Santiago2018-02-19
| | | | Signed-off-by: Ed Santiago <santiago@redhat.com>
* Touch up tutorial location and install reqsTomSweeneyRedHat2018-02-15
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #337 Approved by: rhatdan
* Return imageid from podman pullbaude2018-02-15
| | | | | | | | | | | | When using podman to pull an image, print the image id after the image is pulled. Resolves issue #329 Signed-off-by: baude <bbaude@redhat.com> Closes: #342 Approved by: rhatdan
* Change json to match docker inspectDaniel J Walsh2018-02-11
| | | | | | | | | | Changing these fields caused the output of podman inspect to more closely match docker inspect. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #306 Approved by: mheon
* podman logs: fix tailingbaude2018-02-09
| | | | | | | | | | | Fix issues with tailing of container logs as described in issue #16. Also add in the ability to use a duration or known time stamp formats for the --since flag. Signed-off-by: baude <bbaude@redhat.com> Closes: #317 Approved by: mheon
* docs/tutorials/podman_tutorial.mdbaude2018-02-07
| | | | | | | Update now that more of the podman commands are working correctly, esp top and friends. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #289 from TomSweeneyRedHat/dev/tsweeney/usernameDaniel J Walsh2018-02-07
|\ | | | | Change un/pwd handling to match Buildah's
| * Change un/pwd handling to match Buildah'sTomSweeneyRedHat2018-02-06
| | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* | Merge pull request #303 from umohnani8/certsDaniel J Walsh2018-02-07
|\ \ | | | | | | Change default certs dir to /etc/containers/certs.d
| * | Change default certs dir to /etc/containers/certs.dumohnani82018-02-06
| | | | | | | | | | | | | | | | | | Updated man pages to reflect the change Signed-off-by: umohnani8 <umohnani@redhat.com>
* | | Change sudo examples to use $ instead of $Daniel J Walsh2018-02-07
|/ / | | | | | | | | | | | | sudo is not required when running as root, and # indicates that you are already root. $ indicates you are not root. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Match podman inspect output to docker inspectumohnani82018-02-06
| | | | | | | | | | | | | | | | | | | | | | | | Made a change to make sure that the output paths of podman inspect matches that of docker inspect. For example to get the stop signal you should be able to do podman inspect ctr --format {{.Config.StopSignal}} and the same thing in docker will give the same results. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #292 Approved by: rhatdan
* | Touchup podman kill manpageMatthew Heon2018-02-06
| | | | | | | | | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #299 Approved by: rhatdan
* | Add podman search commandumohnani82018-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | podman search queries a registry for a matching image and prints the output. I added a new flag called "registry" giving the user the option to search a specific registry if they don't want to search all their default registries. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #241 Approved by: rhatdan
* | avoid period character at the beginning of newlineLokesh Mandvekar2018-02-06
|/ | | | | | | | | Otherwise causes rpmlint error for manpage Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org> Closes: #296 Approved by: baude
* Deprecate --format for podman topbaude2018-02-05
| | | | | | | | | | | | | | | | | | | Issue #169 describes a common failure when running podman top where if the commands inside the container container a space in them, podman will panic. This was occuring because we take the output from ps and attempt to format it nicely for output and things like JSON. Given that this cannot be predicted or dealt with programatically, the decision was made to deprecate the format switch and simply output what ps provides us. Migrated top integration tests to ginkgo. Resolves Issue: https://github.com/projectatomic/libpod/issues/169 Signed-off-by: baude <bbaude@redhat.com> Closes: #291 Approved by: rhatdan
* Allow users to specify logpathDaniel J Walsh2018-02-03
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #135 Approved by: mheon
* Add authfile, cert-dir and creds params to buildTomSweeneyRedHat2018-02-01
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #280 Approved by: mheon
* docs/tutorials/podman_tutorial.md: Add Ubuntubaude2018-01-30
| | | | | | | | | Adding in how to install and run podman on Ubuntu. Signed-off-by: baude <bbaude@redhat.com> Closes: #275 Approved by: baude
* Ran spell checker through all man pagesDaniel J Walsh2018-01-29
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #269 Approved by: TomSweeneyRedHat
* Fix podman stats based on QE feedbackumohnani82018-01-25
| | | | | | | | | | | | QE found issues with formatting the go template and the man page was lacking information. Changed the format of the output to match latest docker. Add shortID function that returns the truncated ID Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #258 Approved by: rhatdan
* podman portbaude2018-01-23
| | | | | | | | | | | podman port reports the port mappings per container. it can be used to report the ports ofa single container or latest container or all containers. in the case of a single container, the user can add an option filter for port and protocol. Signed-off-by: baude <bbaude@redhat.com>
* Touchup build to add missing -q flagTomSweeneyRedHat2018-01-20
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #247 Approved by: rhatdan
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 02:19:10 +0000