summaryrefslogtreecommitdiff
path: root/docs
Commit message (Collapse)AuthorAge
* Inspect output should be in array formbaude2018-02-21
| | | | | | | | | | | | | | | | | | | | | | | | Inspect should be able to inspect one or more containers depending on the user input. Therefore, inspect output should be in array format so the consumer could potentially iterate it. This PR allows users to specify one more or containers|images|or a mix for inspection. The output, as stated, is therefore in array form. This holds true even for a singular image. In the case that the user enters an invalid container|image "name", we handle that gracefully. Podman will output json for the valid names until it reaches the invalid one. For example: In this case, podman will out the json for alpine and then print an error about 123 being invalid. It will not continute onto busybox. This behavior imatates docker. This addresses issue #360 Signed-off-by: baude <bbaude@redhat.com> Closes: #371 Approved by: baude
* Add --time alias to manpagesMatthew Heon2018-02-21
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #375 Approved by: rhatdan
* language: correct 'vice versa' in docsEd Santiago2018-02-19
| | | | Signed-off-by: Ed Santiago <santiago@redhat.com>
* Touch up tutorial location and install reqsTomSweeneyRedHat2018-02-15
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #337 Approved by: rhatdan
* Return imageid from podman pullbaude2018-02-15
| | | | | | | | | | | | When using podman to pull an image, print the image id after the image is pulled. Resolves issue #329 Signed-off-by: baude <bbaude@redhat.com> Closes: #342 Approved by: rhatdan
* Change json to match docker inspectDaniel J Walsh2018-02-11
| | | | | | | | | | Changing these fields caused the output of podman inspect to more closely match docker inspect. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #306 Approved by: mheon
* podman logs: fix tailingbaude2018-02-09
| | | | | | | | | | | Fix issues with tailing of container logs as described in issue #16. Also add in the ability to use a duration or known time stamp formats for the --since flag. Signed-off-by: baude <bbaude@redhat.com> Closes: #317 Approved by: mheon
* docs/tutorials/podman_tutorial.mdbaude2018-02-07
| | | | | | | Update now that more of the podman commands are working correctly, esp top and friends. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #289 from TomSweeneyRedHat/dev/tsweeney/usernameDaniel J Walsh2018-02-07
|\ | | | | Change un/pwd handling to match Buildah's
| * Change un/pwd handling to match Buildah'sTomSweeneyRedHat2018-02-06
| | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* | Merge pull request #303 from umohnani8/certsDaniel J Walsh2018-02-07
|\ \ | | | | | | Change default certs dir to /etc/containers/certs.d
| * | Change default certs dir to /etc/containers/certs.dumohnani82018-02-06
| | | | | | | | | | | | | | | | | | Updated man pages to reflect the change Signed-off-by: umohnani8 <umohnani@redhat.com>
* | | Change sudo examples to use $ instead of $Daniel J Walsh2018-02-07
|/ / | | | | | | | | | | | | sudo is not required when running as root, and # indicates that you are already root. $ indicates you are not root. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Match podman inspect output to docker inspectumohnani82018-02-06
| | | | | | | | | | | | | | | | | | | | | | | | Made a change to make sure that the output paths of podman inspect matches that of docker inspect. For example to get the stop signal you should be able to do podman inspect ctr --format {{.Config.StopSignal}} and the same thing in docker will give the same results. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #292 Approved by: rhatdan
* | Touchup podman kill manpageMatthew Heon2018-02-06
| | | | | | | | | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #299 Approved by: rhatdan
* | Add podman search commandumohnani82018-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | podman search queries a registry for a matching image and prints the output. I added a new flag called "registry" giving the user the option to search a specific registry if they don't want to search all their default registries. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #241 Approved by: rhatdan
* | avoid period character at the beginning of newlineLokesh Mandvekar2018-02-06
|/ | | | | | | | | Otherwise causes rpmlint error for manpage Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org> Closes: #296 Approved by: baude
* Deprecate --format for podman topbaude2018-02-05
| | | | | | | | | | | | | | | | | | | Issue #169 describes a common failure when running podman top where if the commands inside the container container a space in them, podman will panic. This was occuring because we take the output from ps and attempt to format it nicely for output and things like JSON. Given that this cannot be predicted or dealt with programatically, the decision was made to deprecate the format switch and simply output what ps provides us. Migrated top integration tests to ginkgo. Resolves Issue: https://github.com/projectatomic/libpod/issues/169 Signed-off-by: baude <bbaude@redhat.com> Closes: #291 Approved by: rhatdan
* Allow users to specify logpathDaniel J Walsh2018-02-03
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #135 Approved by: mheon
* Add authfile, cert-dir and creds params to buildTomSweeneyRedHat2018-02-01
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #280 Approved by: mheon
* docs/tutorials/podman_tutorial.md: Add Ubuntubaude2018-01-30
| | | | | | | | | Adding in how to install and run podman on Ubuntu. Signed-off-by: baude <bbaude@redhat.com> Closes: #275 Approved by: baude
* Ran spell checker through all man pagesDaniel J Walsh2018-01-29
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #269 Approved by: TomSweeneyRedHat
* Fix podman stats based on QE feedbackumohnani82018-01-25
| | | | | | | | | | | | QE found issues with formatting the go template and the man page was lacking information. Changed the format of the output to match latest docker. Add shortID function that returns the truncated ID Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #258 Approved by: rhatdan
* podman portbaude2018-01-23
| | | | | | | | | | | podman port reports the port mappings per container. it can be used to report the ports ofa single container or latest container or all containers. in the case of a single container, the user can add an option filter for port and protocol. Signed-off-by: baude <bbaude@redhat.com>
* Touchup build to add missing -q flagTomSweeneyRedHat2018-01-20
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #247 Approved by: rhatdan
* Merge pull request #216 from rhatdan/dockerDaniel J Walsh2018-01-18
|\ | | | | Add support for mimicing docker CLI
| * Add support for mimicing docker CLIDaniel J Walsh2018-01-18
| | | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Slim down README.md and make tutorials pageTomSweeneyRedHat2018-01-17
|/ | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* Remove --storage-opt from podman run/createDaniel J Walsh2018-01-17
| | | | | | | | | | | podman command has storage options as a global option, these should be set there, rather then in the create and run commands. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #234 Approved by: baude
* Implement and test the following flags for podman run and createumohnani82018-01-15
| | | | | | | | | | | memory, memory-reservation, memory-swap, memory-swappiness, kernel-memory, cpu-period, cou-quota, cpu-shares, cpus, cpuset-cpus, cpuset-mems, blkio-weight, blkio-weight-device, sysctl, and ulimit Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #221 Approved by: mheon
* Add latest to waitbaude2018-01-08
| | | | | | | | | | | | It is desirable to have a --latest switch on the podman wait command so we can wait on the latest container created to end. Also, fixes a panic with latest where no containers are available. Signed-off-by: baude <bbaude@redhat.com> Closes: #201 Approved by: baude
* Shortcut for most recent containerbaude2018-01-08
| | | | | | | | | | | | It is desirable to have a shortcut for the most recently created container. We can now use "**latest" to represent the most recent container instead of its container ID or name. For example: Signed-off-by: baude <bbaude@redhat.com> Closes: #179 Approved by: baude
* Touchup rmi manpageTomSweeneyRedHat2018-01-08
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #195 Approved by: rhatdan
* Change name of kpod to podmanDaniel J Walsh2018-01-04
| | | | | | | | | Also add buildah as a requirement so that kpod build tests will run Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #187 Approved by: mheon
* Initial podman buildTomSweeneyRedHat2017-12-23
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #162 Approved by: rhatdan
* Touch up certs-dir verbiage a bitTomSweeneyRedHat2017-12-21
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #160 Approved by: rhatdan
* Cleanup Documentation and bash completionsDaniel J Walsh2017-12-20
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #159 Approved by: TomSweeneyRedHat
* Add flag --cert-dir and --tls-verify to kpod loginSuraj Deshmukh2017-12-20
| | | | | | | | | | | | | This commit adds a mechanism to override the default certs dir by using command line flag `--cert-dir` for kpod login. Another flag `--tls-verify` is also added which lets you skip certificate validation when contacting container registry. Signed-off-by: Suraj Deshmukh <surajd.service@gmail.com> Closes: #75 Approved by: rhatdan
* Add podman commit commandumohnani82017-12-20
| | | | | | | | | | | | podman commit allows the user to commit containers as images with options of tagging th image, setting a commit message, setting the auther, and making changes to the instructions. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #143 Approved by: rhatdan
* Add support for adding devices to containerDaniel J Walsh2017-12-19
| | | | | | | | | | Also add --quiet option to kpod create/run since this will help with writing tests. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #140 Approved by: TomSweeneyRedHat
* Rename all references to kpod to podmanDaniel J Walsh2017-12-18
| | | | | | | | | The decision is in, kpod is going to be named podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #145 Approved by: umohnani8
* kpod topbaude2017-12-14
| | | | | | | | | Display information about processes in a running container. Signed-off-by: baude <bbaude@redhat.com> Closes: #121 Approved by: rhatdan
* Add support for dir transport to kpod saveumohnani82017-12-14
| | | | | | | | | | | | | | | | | kpod save can now save images to directories using the dir transport. Manifest conversion is also possible. To save with the oci manifest type set --format to oci-dir and to save with the v2s2(docker) manifest type, set --format to docker-dir. The layers can be compressed as well when saving to a directory using the --compress flag. Added functionality to kpod load to be able to load image from a directory Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #137 Approved by: rhatdan
* Add manifest type conversion to kpod pushumohnani82017-12-14
| | | | | | | | | | | User can select from 3 manifest types: oci, v2s1, or v2s2 e.g kpod push --format v2s2 alpine dir:my-directory Added "compress" flag to enable compression when true Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #126 Approved by: rhatdan
* kpod statsbaude2017-12-13
| | | | | | | | | Move kpod stats to the libpod backend. Signed-off-by: baude <bbaude@redhat.com> Closes: #113 Approved by: baude
* Update kpod inspect to use the new container stateumohnani82017-12-12
| | | | | | | | | kpod inspect now uses the new libpod container state and closely matches the output of docker inspect some aspects of it are still WIP as the libpod container state is still being worked on Signed-off-by: umohnani8 <umohnani@redhat.com>
* We don't support VolumesFrom or linksDaniel J Walsh2017-12-12
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #118 Approved by: mheon
* Fix misleading print statement in kpod loadumohnani82017-12-11
| | | | | | | | | When loading an image, kpod load would print something like "Trying to pull docker.io/library/alpine...", which is misleading and makes it sound like its pulling it form the registry. Fixed this by removing these print statements for kpod load Signed-off-by: umohnani8 <umohnani@redhat.com>
* kpod execbaude2017-12-11
| | | | | | | | | | | | | | Initial wiring of kpod exec. We wont support the following options for exec: * detach -- unsure of use case * detach-keys -- not supported by runc * interactive -- all terminals will be interactive Not adding exec tests as we need to think about how to support a test that requires console access but our CI tests have no console. Signed-off-by: baude <bbaude@redhat.com>
* Remove kpod renameMatthew Heon2017-12-04
| | | | | | | | | | Libpod containers are immutable once created. They cannot be renamed after created. As such remove kpod rename. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #101 Approved by: baude
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 00:02:34 +0000