summaryrefslogtreecommitdiff
path: root/libpod/boltdb_state.go
Commit message (Collapse)AuthorAge
* refresh: do not access network ns if not in the namespaceGiuseppe Scrivano2019-10-09
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* rm: add containers eviction with `rm --force`Marco Vedovati2019-09-25
| | | | | | | | | Add ability to evict a container when it becomes unusable. This may happen when the host setup changes after a container creation, making it impossible for that container to be used or removed. Evicting a container is done using the `rm --force` command. Signed-off-by: Marco Vedovati <mvedovati@suse.com>
* Volume lookup needs to include state to unmarshal intoMatthew Heon2019-09-11
| | | | | | | | | Lookup was written before volume states merged, but merged after, and CI didn't catch the obvious failure here. Without a valid state, we try to unmarshall into a null pointer, and 'volume rm' is completely broken because of it. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add function for looking up volumes by partial nameMatthew Heon2019-09-09
| | | | | | | | | | This isn't included in Docker, but seems handy enough. Use the new API for 'volume rm' and 'volume inspect'. Fixes #3891 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Correctly report errors on unmounting SHMMatthew Heon2019-09-05
| | | | | | | | | | | When we fail to remove a container's SHM, that's an error, and we need to report it as such. This may be part of our lingering storage woes. Also, remove MNT_DETACH. It may be another cause of the storage removal failures. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add ability for volumes with options to mount/umountMatthew Heon2019-09-05
| | | | | | | | | | | | | When volume options and the local volume driver are specified, the volume is intended to be mounted using the 'mount' command. Supported options will be used to volume the volume before the first container using it starts, and unmount the volume after the last container using it dies. This should work for any local filesystem, though at present I've only tested with tmpfs and btrfs. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add volume stateMatthew Heon2019-09-05
| | | | | | | | | | | | We need to be able to track the number of times a volume has been mounted for tmpfs/nfs/etc volumes. As such, we need a mutable state for volumes. Add one, with the expected update/save methods in both states. There is backwards compat here, in that older volumes without a state will still be accepted. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Re-add locks to volumes.Matthew Heon2019-08-28
| | | | | | | | | | This will require a 'podman system renumber' after being applied to get lock numbers for existing volumes. Add the DB backend code for rewriting volume configs and use it for updating lock numbers as part of 'system renumber'. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* first pass of corrections for golangci-lintbaude2019-07-10
| | | | Signed-off-by: baude <bbaude@redhat.com>
* libpod: discerne partial IDs between containers and podsMarco Vedovati2019-07-03
| | | | | | | | When specifying a podman command with a partial ID, container and pod commands matches respectively only containers or pods IDs in the BoltDB. Fixes: #3487 Signed-off-by: Marco Vedovati <mvedovati@suse.com>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Avoid a read-write transaction on DB initMatthew Heon2019-06-20
| | | | | | | | Instead, use a less expensive read-only transaction to see if the DB is ready for use (it probably is), and only fire the expensive RW transaction if absolutely necessary. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Update vendor of buildah and containers/imagesDaniel J Walsh2019-05-20
| | | | | | | | | Mainly add support for podman build using --overlay mounts. Updates containers/image also adds better support for new registries.conf file. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Switch Libpod over to new explicit named volumesMatthew Heon2019-04-04
| | | | | | | | | | | | | This swaps the previous handling (parse all volume mounts on the container and look for ones that might refer to named volumes) for the new, explicit named volume lists stored per-container. It also deprecates force-removing volumes that are in use. I don't know how we want to handle this yet, but leaving containers that depend on a volume that no longer exists is definitely not correct. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Change LookupContainer logic to match DockerMatthew Heon2019-03-06
| | | | | | | | | | | | | | | | | | | | When looking up a container or pod by from user input, we handle collisions between names and IDs differently than Docker at present. In Docker, when there is a container with an ID starting with "c1" and a container named "c1", commands on "c1" will always act on the container named "c1". For the same scenario in podman, we throw an error about name collision. Change Podman to follow Docker, by returning the named container or pod instead of erroring. This should also have a positive effect on performance in the lookup-by-full-name case, which no longer needs to fully traverse the list of all pods or containers. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Validate VolumePath against DB configurationMatthew Heon2019-02-26
| | | | | | | | | If this doesn't match, we end up not being able to access named volumes mounted into containers, which is bad. Use the same validation that we use for other critical paths to ensure this one also matches. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Remove locks from volumesMatthew Heon2019-02-21
| | | | | | | | | | | | | | | | | | | I was looking into why we have locks in volumes, and I'm fairly convinced they're unnecessary. We don't have a state whose accesses we need to guard with locks and syncs. The only real purpose for the lock was to prevent concurrent removal of the same volume. Looking at the code, concurrent removal ought to be fine with a bit of reordering - one or the other might fail, but we will successfully evict the volume from the state. Also, remove the 'prune' bool from RemoveVolume. None of our other API functions accept it, and it only served to toggle off more verbose error messages. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add ability to rewrite pod configs in the databaseMatthew Heon2019-02-21
| | | | | | Necessary for rewriting lock IDs as part of renumber. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add a function for overwriting container configMatthew Heon2019-02-21
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* podman-remote inspectbaude2019-01-18
| | | | | | base enablement of the inspect command. Signed-off-by: baude <bbaude@redhat.com>
* Move all libpod/ JSON references over to jsoniterMatthew Heon2019-01-10
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Rename libpod.Config back to ContainerConfigMatthew Heon2019-01-07
| | | | | | | | | | During an earlier bugfix, we swapped all instances of ContainerConfig to Config, which was meant to fix some data we were returning from Inspect. This unfortunately also renamed a libpod internal struct for container configs. Undo the rename here. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Switch all referencs to image.ContainerConfig to image.ConfigDaniel J Walsh2018-12-21
| | | | | | This will more closely match what Docker is doing. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add "podman volume" commandumohnani82018-12-06
| | | | | | | | | | | | | | | Add support for podman volume and its subcommands. The commands supported are: podman volume create podman volume inspect podman volume ls podman volume rm podman volume prune This is a tool to manage volumes used by podman. For now it only handle named volumes, but eventually it will handle all volumes used by podman. Signed-off-by: umohnani8 <umohnani@redhat.com>
* Use runtime lockDir in BoltDB stateMatthew Heon2018-12-04
| | | | | | | | | | | | | Instead of storing the runtime's file lock dir in the BoltDB state, refer to the runtime inside the Bolt state instead, and use the path stored in the runtime. This is necessary since we moved DB initialization very far up in runtime init, before the locks dir is properly initialized (and it must happen before the locks dir can be created, as we use the DB to retrieve the proper path for the locks dir now). Signed-off-by: Matthew Heon <mheon@redhat.com>
* Do not initialize locks dir in BoltDBMatthew Heon2018-12-02
| | | | | | | We already create the locks directory as part of the libpod runtime's init - no need to do it again as part of BoltDB's init. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Make DB config validation an explicit stepMatthew Heon2018-12-02
| | | | | | | | | | Previously, we implicitly validated runtime configuration against what was stored in the database as part of database init. Make this an explicit step, so we can call it after the database has been initialized. This will allow us to retrieve paths from the database and use them to overwrite our defaults if they differ. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add ability to retrieve runtime configuration from DBMatthew Heon2018-12-02
| | | | | | | | | | When we create a Libpod database, we store a number of runtime configuration fields in it. If we can retrieve those, we can use them to configure the runtime to match the DB instead of inbuilt defaults, helping to ensure that we don't error in cases where our compiled-in defaults changed. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Make failure to retrieve individual ctrs/pods nonfatalMatthew Heon2018-08-17
| | | | | | | | | | | | This ensures that we can still use Podman even if a container or pod with bad config JSON makes it into the state. We still can't remove these containers, but at least we can do our best to make things usable. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1294 Approved by: rhatdan
* Do not fetch pod and ctr State on retrieval in BoltMatthew Heon2018-07-31
| | | | | | | | | | | | | | | | | It's not necessary to fill in state immediately, as we'll be overwriting it on any API call accessing it thanks to syncContainer(). It is also causing races when we fetch it without holding the container lock (which syncContainer() does). As such, just don't retrieve the state on initial pull from the database with Bolt. Also, refactor some Linux-specific netns handling functions out of container_internal_linux.go into boltdb_linux.go. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1186 Approved by: rhatdan
* Add a mutex to BoltDB state to prevent lock issuesMatthew Heon2018-07-25
| | | | | | | | | | | | | | Per https://www.sqlite.org/src/artifact/c230a7a24?ln=994-1081, POSIX file advisory locks are unsafe to use within a single process if multiple file descriptors are open for the same file. Unfortunately, this has a strong potential to happen for multithreaded usage of libpod, and could result in DB corruption. To prevent this, wrap all access to BoltDB within a single libpod instance in a mutex to ensure concurrent access cannot occur. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Update comments in BoltDB and In-Memory statesMatthew Heon2018-07-24
| | | | | | | Better explain the inner workings of both state types in comments to make reviews and changes easier. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Address first round of review commentsMatthew Heon2018-07-24
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add tests for state namespacingMatthew Heon2018-07-24
| | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Untested implementation of namespaced BoltDB accessMatthew Heon2018-07-24
| | | | | | | | | | | All BoltDB access and update functions now understand namespaces. Accessing containers outside of your namespace will produce errors, except for Lookup and All functions, which will perform their tasks only on containers within your namespace. The "" namespace remains a reserved, no-restrictions namespace. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add constraint that dependencies must be in the same nsMatthew Heon2018-07-24
| | | | | | | Dependency containers must be in the same namespace, to ensure there are never problems resolving a dependency. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add namespaces and initial constraints to databaseMatthew Heon2018-07-24
| | | | | | | | Add basic awareness of namespaces to the database. As part of this, add constraints so containers can only be added to pods in the same namespace. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* more changes to compile darwinbaude2018-07-05
| | | | | | | | | | | | | | | | this should represent the last major changes to get darwin to **compile**. again, the purpose here is to get darwin to compile so that we can eventually implement a ci task that would protect against regressions for darwin compilation. i have left the manual darwin compilation largely static still and in fact now only interject (manually) two build tags to assist with the build. trevor king has great ideas on how to make this better and i will defer final implementation of those to him. Signed-off-by: baude <bbaude@redhat.com> Closes: #1047 Approved by: rhatdan
* Returning joining namespace error should not be fatalDaniel J Walsh2018-06-29
| | | | | | | | | | | | | | | | | | | | | | I got my database state in a bad way by killing a hanging container. It did not setup the network namespace correctly listing/remove bad containers becomes impossible. podman run alpine/nginx ^c got me in this state. I got into a state in the database where podman ps -a was returning errors and I could not get out of it, Makeing joining the network namespace a non fatal error fixes the issue. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #918 Approved by: mheon
* Add Refresh() to ctrs to refresh state after db changeMatthew Heon2018-06-22
| | | | | | | | | | The Refresh() function is used to reset a container's state after a database format change to state is made that requires migration Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #981 Approved by: baude
* Errors from closing a netns on removal from DB are nonfatalMatthew Heon2018-06-19
| | | | | | | | | | | | | | | | Upon updating a container, if its network namespace has been removed, we attempt to clean up the network namespace locally, to ensure we don't leave hanging file descriptors. This triggers cleanup code which assumes the network namespace still exists, but it almost certainly was removed by whoever removed it from the database. As such, we end up with unavoidable errors if we don't want to leak FDs. Make these errors nonfatal and log them because of this. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #962 Approved by: rhatdan
* Add MacAddress to inspectWim2018-06-18
| | | | | | | Signed-off-by: Wim <wim@42.be> Closes: #955 Approved by: rhatdan
* Correctly report errors retrieving containers in psMatthew Heon2018-06-14
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #944 Approved by: rhatdan
* Add per-pod CGroupsMatthew Heon2018-05-17
| | | | | | | | | | | | | Pods can now create their own (cgroupfs) cgroups which containers in them can (optionally) use. This presently only works with CGroupFS, systemd cgroups are still WIP Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #784 Approved by: rhatdan
* Add pod stateMatthew Heon2018-05-17
| | | | | | | | | | Add a mutable state to pods, and database backend sutable for modifying and updating said state. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #784 Approved by: rhatdan
* Check for duplicate names when generating new container and pod names.Daniel J Walsh2018-03-29
| | | | | | | | | This fixes the situation where we fail to create a container when a name already exists. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #517 Approved by: baude
* Convert bind mounts to use DB fieldMatthew Heon2018-03-08
| | | | | | | | | | | | | | | Refactors creation of bind mounts into a separate function that can be called from elsewhere (e.g. pod start or container restart). This function stores the mounts in the DB using the field established last commit. Spec generation now relies upon this field in the DB instead of manually enumerating files to be bind mounted in. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #462 Approved by: baude
* Update DB to hold CNI network informationMatthew Heon2018-03-02
| | | | | | | | | | | Replace our old IP and Subnet fields in state with CNI types that contain a lot more information. Retrieve these structs from the CNI plugins themselves. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #440 Approved by: baude
* Convert exec session tracking to use a dedicated structMatthew Heon2018-03-01
| | | | | | | | | | | This will behave better if we need to add anything to it at a later date - we can add fields to the struct without breaking existing BoltDB databases. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #412 Approved by: baude
* Add tracking for container exec sessions to DBMatthew Heon2018-03-01
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #412 Approved by: baude
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-18 06:13:04 +0000