| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
This change adds the entry `host.containers.internal` to the `/etc/hosts`
file within a new containers filesystem. The ip address is determined by
the containers networking configuration and points to the gateway address
for the containers networking namespace.
Closes #5651
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
| |
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
| |
Use the whitespace linter and fix the reported problems.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
|
| |
|
|
|
|
|
|
|
|
|
| |
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
| |
Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
if a single user is mapped in the user namespace, handle it as root.
It is needed for running unprivileged containers with a single user
available without being forced to run with euid and egid set to 0.
Needs: https://github.com/containers/storage/pull/794
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
| |
Before querying for a container's cgroup path, make sure that the
container is synced. Also make sure to error out if the container
isn't running.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add a new `pkg/copy` to centralize all container-copy related code.
* The new code is based on Buildah's `copier` package.
* The compat `/archive` endpoints use the new `copy` package.
* Update docs and an several new tests.
* Includes many fixes, most notably, the look-up of volumes and mounts.
Breaking changes:
* Podman is now expecting that container-destination paths exist.
Before, Podman created the paths if needed. Docker does not do
that and I believe Podman should not either as it's a recipe for
masking errors. These errors may be user induced (e.g., a path
typo), or internal typos (e.g., when the destination may be a
mistakenly unmounted volume). Let's keep the magic low for such
a security sensitive feature.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes things a lot more clear - if we are actually joining a
CNI network, we are guaranteed to get a non-zero length list of
networks.
We do, however, need to know if the network we are joining is the
default network for inspecting containers as it determines how we
populate the response struct. To handle this, add a bool to
indicate that the network listed was the default network, and
only the default network.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When running on cgroups v1, `/proc/{PID}/cgroup` has multiple entries,
each pointing potentially to a different cgroup. Some may be empty,
some may point to parents.
The one we really need is the libpod-specific one, which always is the
longest path. So instead of looking at the first entry, look at all and
select the longest one.
Fixes: #8397
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
When looking up a container's cgroup path, parse /proc/[PID]/cgroup.
This will work across all cgroup managers and configurations and is
supported on cgroups v1 and v2.
Fixes: #8265
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert the existing network aliases set/remove code to network
connect and disconnect. We can no longer modify aliases for an
existing network, but we can add and remove entire networks. As
part of this, we need to add a new function to retrieve current
aliases the container is connected to (we had a table for this
as of the first aliases PR, but it was not externally exposed).
At the same time, remove all deconflicting logic for aliases.
Docker does absolutely no checks of this nature, and allows two
containers to have the same aliases, aliases that conflict with
container names, etc - it's just left to DNS to return all the
IP addresses, and presumably we round-robin from there? Most
tests for the existing code had to be removed because of this.
Convert all uses of the old container config.Networks field,
which previously included all networks in the container, to use
the new DB table. This ensures we actually get an up-to-date list
of in-use networks. Also, add network aliases to the output of
`podman inspect`.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we create a container, we assign a cgroup parent based on
the current cgroup manager in use. This parent is only usable
with the cgroup manager the container is created with, so if the
default cgroup manager is later changed or overridden, the
container will not be able to start.
To solve this, store the cgroup manager that created the
container in container configuration, so we can guarantee a
container with a systemd cgroup parent will always be started
with systemd cgroups.
Unfortunately, this is very difficult to test in CI, due to the
fact that we hard-code cgroup manager on all invocations of
Podman in CI.
Fixes #7830
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
| |
This commit handle the TODO task of breaking the Container
config into smaller sub-configs
Signed-off-by: ldelossa <ldelossa@redhat.com>
|
| |
|
|
|
|
|
|
| |
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
|
|
|
|
| |
Add support -v for overlay volume mounts in podman.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |
|
|
|
|
| |
do not pass network specific options through the network namespace.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
|
| |\
| |
| | |
Add --tz flag to create, run
|
| | |
| |
| |
| |
| |
| |
| | |
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When running under systemd there is no need to create yet another
cgroup for the container.
With conmon-delegated the current cgroup will be split in two sub
cgroups:
- supervisor
- container
The supervisor cgroup will hold conmon and the podman process, while
the container cgroup is used by the OCI runtime (using the cgroupfs
backend).
Closes: https://github.com/containers/libpod/issues/6400
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
| |
Add --preservefds to podman run. close https://github.com/containers/libpod/issues/6458
Signed-off-by: Qi Wang <qiwan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We initially believed that implementing this required support for
restarting containers after reboot, but this is not the case.
The unless-stopped restart policy acts identically to the always
restart policy except in cases related to reboot (which we do not
support yet), but it does not require that support for us to
implement it.
Changes themselves are quite simple, we need a new restart policy
constant, we need to remove existing checks that block creation
of containers when unless-stopped was used, and we need to update
the manpages.
Fixes #6508
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
| |
rid ourseleves of libpod references in v2 client
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In order to better support kata containers and systemd containers
container-selinux has added new types. Podman should execute the
container with an SELinux process label to match the container type.
Traditional Container process : container_t
KVM Container Process: containre_kvm_t
PID 1 Init process: container_init_t
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
| |
vendor in c/common config pkg for containers.conf
Signed-off-by: Qi Wang qiwan@redhat.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |\
| |
| | |
Begin exec rework
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
As part of the rework of exec sessions, we want to split Create
and Start - and, as a result, we need to keep everything needed
to start exec sessions in the struct, not just the bare minimum
for tracking running ones.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add support to auto-update containers running in systemd units as
generated with `podman generate systemd --new`.
`podman auto-update` looks up containers with a specified
"io.containers.autoupdate" label (i.e., the auto-update policy).
If the label is present and set to "image", Podman reaches out to the
corresponding registry to check if the image has been updated. We
consider an image to be updated if the digest in the local storage is
different than the one of the remote image. If an image must be
updated, Podman pulls it down and restarts the container. Note that the
restarting sequence relies on systemd.
At container-creation time, Podman looks up the "PODMAN_SYSTEMD_UNIT"
environment variables and stores it verbatim in the container's label.
This variable is now set by all systemd units generated by
`podman-generate-systemd` and is set to `%n` (i.e., the name of systemd
unit starting the container). This data is then being used in the
auto-update sequence to instruct systemd (via DBUS) to restart the unit
and hence to restart the container.
Note that this implementation of auto-updates relies on systemd and
requires a fully-qualified image reference to be used to create the
container. This enforcement is necessary to know which image to
actually check and pull. If we used an image ID, we would not know
which image to check/pull anymore.
Fixes: #3575
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before Libpod supported named volumes, we approximated image
volumes by bind-mounting in per-container temporary directories.
This was handled by Libpod, and had a corresponding database
entry to enable/disable it.
However, when we enabled named volumes, we completely rewrote the
old implementation; none of the old bind mount implementation
still exists, save one flag in the database. With nothing
remaining to use it, it has no further purpose.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current Libpod pkg/spec has become a victim of the better
part of three years of development that tied it extremely closely
to the current Podman CLI. Defaults are spread across multiple
places, there is no easy way to produce a CreateConfig that will
actually produce a valid container, and the logic for generating
configs has sprawled across at least three packages.
This is an initial pass at a package that generates OCI specs
that will supersede large parts of the current pkg/spec. The
CreateConfig will still exist, but will effectively turn into a
parsed CLI. This will be compiled down into the new SpecGenerator
struct, which will generate the OCI spec and Libpod create
options.
The preferred integration point for plugging into Podman's Go API
to create containers will be the new CreateConfig, as it's less
tied to Podman's command line. CRI-O, for example, will likely
tie in here.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
| |
it allows to disable cgroups creation only for the conmon process.
A new cgroup is created for the container payload.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
support a custom tag to add to each log for the container.
It is currently supported only by the journald backend.
Closes: https://github.com/containers/libpod/issues/3653
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RootlessKit port forwarder has a lot of advantages over the slirp4netns port forwarder:
* Very high throughput.
Benchmark result on Travis: socat: 5.2 Gbps, slirp4netns: 8.3 Gbps, RootlessKit: 27.3 Gbps
(https://travis-ci.org/rootless-containers/rootlesskit/builds/597056377)
* Connections from the host are treated as 127.0.0.1 rather than 10.0.2.2 in the namespace.
No UDP issue (#4586)
* No tcp_rmem issue (#4537)
* Probably works with IPv6. Even if not, it is trivial to support IPv6. (#4311)
* Easily extensible for future support of SCTP
* Easily extensible for future support of `lxc-user-nic` SUID network
RootlessKit port forwarder has been already adopted as the default port forwarder by Rootless Docker/Moby,
and no issue has been reported AFAIK.
As the port forwarder is imported as a Go package, no `rootlesskit` binary is required for Podman.
Fix #4586
May-fix #4559
Fix #4537
May-fix #4311
See https://github.com/rootless-containers/rootlesskit/blob/v0.7.0/pkg/port/builtin/builtin.go
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Store the full command plus arguments of the process the container has
been created with. Expose this data as a `Config.CreateCommand` field
in the container-inspect data as well.
This information can be useful for debugging, as we can find out which
command has created the container, and, if being created via the Podman
CLI, we know exactly with which flags the container has been created
with.
The immediate motivation for this change is to use this information for
`podman-generate-systemd` to generate systemd-service files that allow
for creating new containers (in contrast to only starting existing
ones).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
| |
honor the systemd parent directory when specified.
Closes: https://github.com/containers/libpod/issues/4634
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The code currently assumes that the container we delegate network
namespace to will never further delegate to another container, so
when looking up things like /etc/hosts and /etc/resolv.conf we
won't pull the correct files from the chained dependency. The
changes to resolve this are relatively simple - just need to keep
looking until we find a container without NetNsCtr set.
Fixes #4626
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
I basically copied and adapted the statements for setting IP.
Closes #1136
Signed-off-by: Jakub Filak <jakub.filak@sap.com>
|
