summaryrefslogtreecommitdiff
path: root/libpod/container.go
Commit message (Collapse)AuthorAge
* use libnetwork from c/commonPaul Holzinger2022-01-12
| | | | | | | | The libpod/network packages were moved to c/common so that buildah can use it as well. To prevent duplication use it in podman as well and remove it from here. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add more checkpoint/restore information to 'inspect'Adrian Reber2021-12-17
| | | | | | | | | | | | | | | | | | | | | | | | This adds the following information to the output of 'podman inspect': * CheckpointedAt - time the container was checkpointed Only set if the container has been checkpointed * RestoredAt - time the container was restored Only set if the container has been restored * CheckpointLog - path to the checkpoint log file (CRIU's dump.log) Only set if the log file exists (--keep) * RestoreLog - path to the restore log file (CRIU's restore.log) Only set if the log file exists (--keep) * CheckpointPath - path to the actual (CRIU) checkpoint files Only set if the checkpoint files exists (--keep) * Restored - set to true if the container has been restored Only set if the container has been restored Signed-off-by: Adrian Reber <areber@redhat.com>
* remove unneeded return value from c.Networks()Paul Holzinger2021-12-14
| | | | | | We do not need to return a extra bool. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* network db rewrite: migrate existing settingsPaul Holzinger2021-12-14
| | | | | | | | | | | | | | The new network db structure stores everything in the networks bucket. Previously some network settings were not written the the network bucket and only stored in the container config. Instead of the old format which used the container ID as value in the networks buckets we now use the PerNetworkoptions struct there. To migrate existing users we use the state.GetNetworks() function. If it fails to read the new format it will automatically migrate the old config format to the new one. This is allows a flawless migration path. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* container, cgroup: detect pid terminationGiuseppe Scrivano2021-12-01
| | | | | | | | | | | | | | If the /proc/$PID/cgroup file doesn't exist, then it is likely the container was terminated in the meanwhile so report ErrCtrStopped that is already handled instead of ENOENT. commit a66f40b4df039e94572fa38c070207a435cfa466 introduced the regression. Closes: https://github.com/containers/podman/issues/12457 [NO NEW TESTS NEEDED] it solves a race in the CI that is difficult to reproduce. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* libpod: improve heuristic to detect cgroupGiuseppe Scrivano2021-11-24
| | | | | | | | | | | improve the heuristic to detect the scope that was created for the container. This is necessary with systemd running as PID 1, since it moves itself to a different sub-cgroup, thus stats would not account for other processes in the same container. Closes: https://github.com/containers/podman/issues/12400 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* secret: honor custom target for secrets with runAditya Rajan2021-11-15
| | | | | | | | | | | Honor custom `target` if specified while running or creating containers with secret `type=mount`. Example: `podman run -it --secret token,type=mount,target=TOKEN ubi8/ubi:latest bash` Signed-off-by: Aditya Rajan <arajan@redhat.com>
* libpod: deduplicate ports in dbPaul Holzinger2021-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OCICNI port format has one big problem: It does not support ranges. So if a users forwards a range of 1k ports with podman run -p 1001-2000 we have to store each of the thousand ports individually as array element. This bloats the db and makes the JSON encoding and decoding much slower. In many places we already use a better port struct type which supports ranges, e.g. `pkg/specgen` or the new network interface. Because of this we have to do many runtime conversions between the two port formats. If everything uses the new format we can skip the runtime conversions. This commit adds logic to replace all occurrences of the old format with the new one. The database will automatically migrate the ports to new format when the container config is read for the first time after the update. The `ParsePortMapping` function is `pkg/specgen/generate` has been reworked to better work with the new format. The new logic is able to deduplicate the given ports. This is necessary the ensure we store them efficiently in the DB. The new code should also be more performant than the old one. To prove that the code is fast enough I added go benchmarks. Parsing 1 million ports took less than 0.5 seconds on my laptop. Benchmark normalize PortMappings in specgen: Please note that the 1 million ports are actually 20x 50k ranges because we cannot have bigger ranges than 65535 ports. ``` $ go test -bench=. -benchmem ./pkg/specgen/generate/ goos: linux goarch: amd64 pkg: github.com/containers/podman/v3/pkg/specgen/generate cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op PASS ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s ``` Benchmark convert old port format to new one: ``` go test -bench=. -benchmem ./libpod/ goos: linux goarch: amd64 pkg: github.com/containers/podman/v3/libpod cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op PASS ok github.com/containers/podman/v3/libpod 11.727s ``` Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* libpod: add execSessionNoCopyValentin Rothberg2021-09-29
| | | | | | | | | To avoid creating an expensive deep copy, create an internal function to access the exec session. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* libpod: do not call (*container).Spec()Valentin Rothberg2021-09-29
| | | | | | | | | | | | Access the container's spec field directly inside of libpod instead of calling Spec() which in turn creates expensive JSON deep copies. Accessing the field directly drops memory consumption of a simple podman run --rm busybox true from ~700kB to ~600kB. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Bump CNI to v1.0.1Paul Holzinger2021-09-22
| | | | | | | | | | | | | | | | | | | | | Update CNI so we can match wrapped errors. This should silence ENOENT warnings when trying to read the cni conflist files. Fixes #10926 Because CNI v1.0.0 contains breaking changes we have to change some import paths. Also we cannot update the CNI version used for the conflist files created by `podman network create` because this would require at least containernetwork-plugins v1.0.1 and a updated dnsname plugin. Because this will take a while until it lands in most distros we should not use this version. So keep using v0.4.0 for now. The update from checkpoint-restore/checkpointctl is also required to make sure it no longer uses CNI to read the network status. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Pod Device Supportcdoern2021-09-20
| | | | | | | | | | added support for pod devices. The device gets added to the infra container and recreated in all containers that join the pod. This required a new container config item to keep track of the original device passed in by the user before the path was parsed into the container device. Signed-off-by: cdoern <cdoern@redhat.com>
* Drop OCICNI dependencyPaul Holzinger2021-09-15
| | | | | | | | | | | We do not use the ocicni code anymore so let's get rid of it. Only the port struct is used but we can copy this into libpod network types so we can debloat the binary. The next step is to remove the OCICNI port mapping form the container config and use the better PortMapping struct everywhere. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Wire network interface into libpodPaul Holzinger2021-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of the new network interface in libpod. This commit contains several breaking changes: - podman network create only outputs the new network name and not file path. - podman network ls shows the network driver instead of the cni version and plugins. - podman network inspect outputs the new network struct and not the cni conflist. - The bindings and libpod api endpoints have been changed to use the new network structure. The container network status is stored in a new field in the state. The status should be received with the new `c.getNetworkStatus`. This will migrate the old status to the new format. Therefore old containers should contine to work correctly in all cases even when network connect/ disconnect is used. New features: - podman network reload keeps the ip and mac for more than one network. - podman container restore keeps the ip and mac for more than one network. - The network create compat endpoint can now use more than one ipam config. The man pages and the swagger doc are updated to reflect the latest changes. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add init containers to generate and play kubeUrvashi Mohnani2021-09-10
| | | | | | | | | | | | | | | Kubernetes has a concept of init containers that run and exit before the regular containers in a pod are started. We added init containers to podman pods as well. This patch adds support for generating init containers in the kube yaml when a pod we are converting had init containers. When playing a kube yaml, it detects an init container and creates such a container in podman accordingly. Note, only init containers created with the init type set to "always" will be generated as the "once" option deletes the init container after it has run and exited. Play kube will always creates init containers with the "always" init container type. Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Add Checkpointed bool to InspectMatthew Heon2021-09-07
| | | | | | | | When inspecting a container, we now report whether the container was stopped by a `podman checkpoint` operation via a new bool in the State portion of inspected, `Checkpointed`. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Implement SD-NOTIFY proxy in conmonDaniel J Walsh2021-08-20
| | | | | | | | | | | | | | | | This leverages conmon's ability to proxy the SD-NOTIFY socket. This prevents locking caused by OCI runtime blocking, waiting for SD-NOTIFY messages, and instead passes the messages directly up to the host. NOTE: Also re-enable the auto-update tests which has been disabled due to flakiness. With this change, Podman properly integrates into systemd. Fixes: #7316 Signed-off-by: Joseph Gooch <mrwizard@dok.org> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Run codespell to fix spellingDaniel J Walsh2021-08-11
| | | | | | [NO TESTS NEEDED] Just fixing spelling. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* ps: support the container notation for ps --filter network=...flouthoc2021-07-30
| | | | Signed-off-by: flouthoc <flouthoc.git@gmail.com>
* container: ignore named hierarchiesGiuseppe Scrivano2021-06-10
| | | | | | | | | | when looking up the container cgroup, ignore named hierarchies since containers running systemd as payload will create a sub-cgroup and move themselves there. Closes: https://github.com/containers/podman/issues/10602 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add the option of Rootless CNI networking by defaultMatthew Heon2021-05-26
| | | | | | | | | | | | | | | | | | | When the containers.conf field "NetNS" is set to "Bridge" and the "RootlessNetworking" field is set to "cni", Podman will now handle rootless in the same way it does root - all containers will be joined to a default CNI network, instead of exclusively using slirp4netns. If no CNI default network config is present for the user, one will be auto-generated (this also works for root, but it won't be nearly as common there since the package should already ship a config). I eventually hope to remove the "NetNS=Bridge" bit from containers.conf, but let's get something in for Brent to work with. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #10366 from ashley-cui/secretoptionsOpenShift Merge Robot2021-05-17
|\ | | | | Support uid,gid,mode options for secrets
| * Support uid,gid,mode options for secretsAshley Cui2021-05-17
| | | | | | | | | | | | | | Support UID, GID, Mode options for mount type secrets. Also, change default secret permissions to 444 so all users can read secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | Add host.containers.internal entry into container's etc/hostsBaron Lenardson2021-05-17
|/ | | | | | | | | | | This change adds the entry `host.containers.internal` to the `/etc/hosts` file within a new containers filesystem. The ip address is determined by the containers networking configuration and points to the gateway address for the containers networking namespace. Closes #5651 Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
* Do not leak libpod package into the remote clientPaul Holzinger2021-03-15
| | | | | | | | | | | | | | | | | | Some packages used by the remote client imported the libpod package. This is not wanted because it adds unnecessary bloat to the client and also causes problems with platform specific code(linux only), see #9710. The solution is to move the used functions/variables into extra packages which do not import libpod. This change shrinks the remote client size more than 6MB compared to the current master. [NO TESTS NEEDED] I have no idea how to test this properly but with #9710 the cross compile should fail. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* podman cp: support copying on tmpfs mountsValentin Rothberg2021-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Traditionally, the path resolution for containers has been resolved on the *host*; relative to the container's mount point or relative to specified bind mounts or volumes. While this works nicely for non-running containers, it poses a problem for running ones. In that case, certain kinds of mounts (e.g., tmpfs) will not resolve correctly. A tmpfs is held in memory and hence cannot be resolved relatively to the container's mount point. A copy operation will succeed but the data will not show up inside the container. To support these kinds of mounts, we need to join the *running* container's mount namespace (and PID namespace) when copying. Note that this change implies moving the copy and stat logic into `libpod` since we need to keep the container locked to avoid race conditions. The immediate benefit is that all logic is now inside `libpod`; the code isn't scattered anymore. Further note that Docker does not support copying to tmpfs mounts. Tests have been extended to cover *both* path resolutions for running and created containers. New tests have been added to exercise the tmpfs-mount case. For the record: Some tests could be improved by using `start -a` instead of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI which forced me to use the more expensive start-exec option. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add U volume flag to chown source volumesEduardo Vega2021-02-22
| | | | Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Enable whitespace linterPaul Holzinger2021-02-11
| | | | | | | | Use the whitespace linter and fix the reported problems. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* podman generate kube ignores --network=hostMilivoje Legenovic2021-01-30
| | | | Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
* libpod: handle single user mapped as rootGiuseppe Scrivano2020-12-24
| | | | | | | | | | | if a single user is mapped in the user namespace, handle it as root. It is needed for running unprivileged containers with a single user available without being forced to run with euid and egid set to 0. Needs: https://github.com/containers/storage/pull/794 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* container cgroup pathValentin Rothberg2020-12-07
| | | | | | | | Before querying for a container's cgroup path, make sure that the container is synced. Also make sure to error out if the container isn't running. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* rewrite podman-cpValentin Rothberg2020-12-04
| | | | | | | | | | | | | | | | | | | | | | | | * Add a new `pkg/copy` to centralize all container-copy related code. * The new code is based on Buildah's `copier` package. * The compat `/archive` endpoints use the new `copy` package. * Update docs and an several new tests. * Includes many fixes, most notably, the look-up of volumes and mounts. Breaking changes: * Podman is now expecting that container-destination paths exist. Before, Podman created the paths if needed. Docker does not do that and I believe Podman should not either as it's a recipe for masking errors. These errors may be user induced (e.g., a path typo), or internal typos (e.g., when the destination may be a mistakenly unmounted volume). Let's keep the magic low for such a security sensitive feature. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Make c.networks() list include the default networkMatthew Heon2020-11-20
| | | | | | | | | | | | | | This makes things a lot more clear - if we are actually joining a CNI network, we are guaranteed to get a non-zero length list of networks. We do, however, need to know if the network we are joining is the default network for inspecting containers as it determines how we populate the response struct. To handle this, add a bool to indicate that the network listed was the default network, and only the default network. Signed-off-by: Matthew Heon <mheon@redhat.com>
* fix container cgroup lookupValentin Rothberg2020-11-20
| | | | | | | | | | | | | When running on cgroups v1, `/proc/{PID}/cgroup` has multiple entries, each pointing potentially to a different cgroup. Some may be empty, some may point to parents. The one we really need is the libpod-specific one, which always is the longest path. So instead of looking at the first entry, look at all and select the longest one. Fixes: #8397 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* add network connect|disconnect compat endpointsbaude2020-11-19
| | | | | | | | | | | this enables the ability to connect and disconnect a container from a given network. it is only for the compatibility layer. some code had to be refactored to avoid circular imports. additionally, tests are being deferred temporarily due to some incompatibility/bug in either docker-py or our stack. Signed-off-by: baude <bbaude@redhat.com>
* add network connect|disconnect compat endpointsbaude2020-11-17
| | | | | | | | | | | this enables the ability to connect and disconnect a container from a given network. it is only for the compatibility layer. some code had to be refactored to avoid circular imports. additionally, tests are being deferred temporarily due to some incompatibility/bug in either docker-py or our stack. Signed-off-by: baude <bbaude@redhat.com>
* use container cgroups pathValentin Rothberg2020-11-17
| | | | | | | | | When looking up a container's cgroup path, parse /proc/[PID]/cgroup. This will work across all cgroup managers and configurations and is supported on cgroups v1 and v2. Fixes: #8265 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add support for network connect / disconnect to DBMatthew Heon2020-11-11
| | | | | | | | | | | | | | | | | | | | | | | | Convert the existing network aliases set/remove code to network connect and disconnect. We can no longer modify aliases for an existing network, but we can add and remove entire networks. As part of this, we need to add a new function to retrieve current aliases the container is connected to (we had a table for this as of the first aliases PR, but it was not externally exposed). At the same time, remove all deconflicting logic for aliases. Docker does absolutely no checks of this nature, and allows two containers to have the same aliases, aliases that conflict with container names, etc - it's just left to DNS to return all the IP addresses, and presumably we round-robin from there? Most tests for the existing code had to be removed because of this. Convert all uses of the old container config.Networks field, which previously included all networks in the container, to use the new DB table. This ensures we actually get an up-to-date list of in-use networks. Also, add network aliases to the output of `podman inspect`. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* new "image" mount typeValentin Rothberg2020-10-29
| | | | | | | | | | | | | | Add a new "image" mount type to `--mount`. The source of the mount is the name or ID of an image. The destination is the path inside the container. Image mounts further support an optional `rw,readwrite` parameter which if set to "true" will yield the mount writable inside the container. Note that no changes are propagated to the image mount on the host (which in any case is read only). Mounts are overlay mounts. To support read-only overlay mounts, vendor a non-release version of Buildah. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Store cgroup manager on a per-container basisMatthew Heon2020-10-08
| | | | | | | | | | | | | | | | | | | | | When we create a container, we assign a cgroup parent based on the current cgroup manager in use. This parent is only usable with the cgroup manager the container is created with, so if the default cgroup manager is later changed or overridden, the container will not be able to start. To solve this, store the cgroup manager that created the container in container configuration, so we can guarantee a container with a systemd cgroup parent will always be started with systemd cgroups. Unfortunately, this is very difficult to test in CI, due to the fact that we hard-code cgroup manager on all invocations of Podman in CI. Fixes #7830 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Refactor container configlouis2020-07-23
| | | | | | | This commit handle the TODO task of breaking the Container config into smaller sub-configs Signed-off-by: ldelossa <ldelossa@redhat.com>
* Add --umask flag for create, runAshley Cui2020-07-21
| | | | | | | | --umask sets the umask inside the container Defaults to 0022 Co-authored-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Ashley Cui <acui@redhat.com>
* Add support for overlay volume mounts in podman.Qi Wang2020-07-20
| | | | | | | | Add support -v for overlay volume mounts in podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Qi Wang <qiwan@redhat.com>
* libpod: pass down network optionsGiuseppe Scrivano2020-07-16
| | | | | | do not pass network specific options through the network namespace. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add username to /etc/passwd inside of container if --userns keep-idDaniel J Walsh2020-07-07
| | | | | | | | | | If I enter a continer with --userns keep-id, my UID will be present inside of the container, but most likely my user will not be defined. This patch will take information about the user and stick it into the container. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Implement --sdnotify cmdline option to control sd-notify behaviorJoseph Gooch2020-07-06
| | | | | | | | | | | | | | | | | | | --sdnotify container|conmon|ignore With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI runtime doesn't pass it into the container. We also advertise "ready" when the OCI runtime finishes to advertise the service as ready. With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI runtime passes it into the container for initialization, and let the container advertise further metadata. This is the default, which is closest to the behavior podman has done in the past. The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor any child processes will talk to systemd. This removes the need for hardcoded CID and PID files in the command line, and the PIDFile directive, as the pid is advertised directly through sd-notify. Signed-off-by: Joseph Gooch <mrwizard@dok.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-28 04:25:39 +0000