summaryrefslogtreecommitdiff
path: root/libpod/container_api.go
Commit message (Collapse)AuthorAge
* Switch to bufio Reader for exec streamsPeter Hunt2019-10-31
| | | | | | | | There were many situations that made exec act funky with input. pipes didn't work as expected, as well as sending input before the shell opened. Thinking about it, it seemed as though the issues were because of how os.Stdin buffers (it doesn't). Dropping this input had some weird consequences. Instead, read from os.Stdin as bufio.Reader, allowing the input to buffer before passing it to the container. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Add ensureState helper for checking container stateMatthew Heon2019-10-28
| | | | | | | | | | | | | | | | We have a lot of checks for container state scattered throughout libpod. Many of these need to ensure the container is in one of a given set of states so an operation may safely proceed. Previously there was no set way of doing this, so we'd use unique boolean logic for each one. Introduce a helper to standardize state checks. Note that this is only intended to replace checks for multiple states. A simple check for one state (ContainerStateRunning, for example) should remain a straight equality, and not use this new helper. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add a MissingRuntime implementationMatthew Heon2019-10-15
| | | | | | | | | | | | | | | | | When a container is created with a given OCI runtime, but then it is uninstalled or removed from the configuration file, Libpod presently reacts very poorly. The EvictContainer code can potentially remove these containers, but we still can't see them in `podman ps` (aside from the massive logrus.Errorf messages they create). Providing a minimal OCI runtime implementation for missing runtimes allows us to behave better. We'll be able to retrieve containers from the database, though we still pop up an error for each missing runtime. For containers which are stopped, we can remove them as normal. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move OCI runtime implementation behind an interfaceMatthew Heon2019-10-10
| | | | | | | | | | | | For future work, we need multiple implementations of the OCI runtime, not just a Conmon-wrapped runtime matching the runc CLI. As part of this, do some refactoring on the interface for exec (move to a struct, not a massive list of arguments). Also, add 'all' support to Kill and Stop (supported by runc and used a bit internally for removing containers). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Podman-remote run should wait for exit codeDaniel J Walsh2019-09-12
| | | | | | | | This change matches what is happening on the podman local side and should eliminate a race condition. Also exit commands on the server side should start to return to client. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Use exit code constantsDaniel J Walsh2019-09-12
| | | | | | | We have leaked the exit number codess all over the code, this patch removes the numbers to constants. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* libpod: avoid polling container statusGiuseppe Scrivano2019-09-04
| | | | | | | | | | | | | | | | | | | | | | | use the inotify backend to be notified on the container exit instead of polling continuosly the runtime. Polling the runtime slowns significantly down the podman execution time for short lived processes: $ time bin/podman run --rm -ti fedora true real 0m0.324s user 0m0.088s sys 0m0.064s from: $ time podman run --rm -ti fedora true real 0m4.199s user 0m5.339s sys 0m0.344s Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* exec: run with user specified on container startPeter Hunt2019-08-20
| | | | | | | Before, if the container was run with a specified user that wasn't root, exec would fail because it always set to root unless respecified by user. instead, inherit the user from the container start. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Merge pull request #3690 from adrianreber/ignore-static-ipOpenShift Merge Robot2019-08-05
|\ | | | | restore: added --ignore-static-ip option
| * restore: added --ignore-static-ip optionAdrian Reber2019-08-02
| | | | | | | | | | | | | | | | | | | | If a container is restored multiple times from an exported checkpoint with the help of '--import --name', the restore will fail if during 'podman run' a static container IP was set with '--ip'. The user can tell the restore process to ignore the static IP with '--ignore-static-ip'. Signed-off-by: Adrian Reber <areber@redhat.com>
* | Ensure we generate a 'stopped' event on force-removeMatthew Heon2019-07-31
|/ | | | | | | | | | | | | | When forcibly removing a container, we are initiating an explicit stop of the container, which is not reflected in 'podman events'. Swap to using our standard 'stop()' function instead of a custom one for force-remove, and move the event into the internal stop function (so internal calls also register it). This does add one more database save() to `podman remove`. This should not be a terribly serious performance hit, and does have the desirable side effect of making things generally safer. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* move editing of exitCode to runtimePeter Hunt2019-07-23
| | | | | | | | | There's no way to get the error if we successfully get an exit code (as it's just printed to stderr instead). instead of relying on the error to be passed to podman, and edit based on the error code, process it on the varlink side instead Also move error codes to define package Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Implement conmon execPeter Hunt2019-07-22
| | | | | | | | | | | | | | | | | | | | | | This includes: Implement exec -i and fix some typos in description of -i docs pass failed runtime status to caller Add resize handling for a terminal connection Customize exec systemd-cgroup slice fix healthcheck fix top add --detach-keys Implement podman-remote exec (jhonce) * Cleanup some orphaned code (jhonce) adapt remote exec for conmon exec (pehunt) Fix healthcheck and exec to match docs Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error Use these different errors in branching for exit code in healthcheck and exec Set conmon to use new api version Signed-off-by: Jhon Honce <jhonce@redhat.com> Signed-off-by: Peter Hunt <pehunt@redhat.com>
* golangci-lint round #3baude2019-07-21
| | | | | | | this is the third round of preparing to use the golangci-lint on our code base. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #3443 from adrianreber/rootfs-changes-migrationOpenShift Merge Robot2019-07-19
|\ | | | | Include changes to the container's root file-system in the checkpoint archive
| * Add --ignore-rootfs option for checkpoint/restoreAdrian Reber2019-07-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly added functionality to include the container's root file-system changes into the checkpoint archive can now be explicitly disabled. Either during checkpoint or during restore. If a container changes a lot of files during its runtime it might be more effective to migrated the root file-system changes in some other way and to not needlessly increase the size of the checkpoint archive. If a checkpoint archive does not contain the root file-system changes information it will automatically be skipped. If the root file-system changes are part of the checkpoint archive it is also possible to tell Podman to ignore these changes. Signed-off-by: Adrian Reber <areber@redhat.com>
| * Fix typo in checkpoint/restore related textsAdrian Reber2019-07-11
| | | | | | | | Signed-off-by: Adrian Reber <areber@redhat.com>
* | Remove exec PID files after use to prevent memory leaksMatthew Heon2019-07-18
| | | | | | | | | | | | | | | | | | | | | | | | We have another patch running to do the same for exit files, with a much more in-depth explanation of why it's necessary. Suffice to say that persistent files in tmpfs tied to container CGroups lead to significant memory allocations that last for the lifetime of the file. Based on a patch by Andrea Arcangeli (aarcange@redhat.com). Signed-off-by: Matthew Heon <mheon@redhat.com>
* | golangci-lint pass number 2baude2019-07-11
|/ | | | | | clean up and prepare to migrate to the golangci-linter Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #3324 from marcov/detach-keys-configurableOpenShift Merge Robot2019-07-01
|\ | | | | libpod: specify a detach keys sequence in libpod.conf
| * libpod: fix hang on container start and attachMarco Vedovati2019-06-26
| | | | | | | | | | | | | | | | | | | | When a container is attached upon start, the WaitGroup counter may never be decremented if an error is raised before start, causing the caller to hang. Synchronize with the start & attach goroutine using a channel, to be able to detect failures before start. Signed-off-by: Marco Vedovati <mvedovati@suse.com>
* | libpod removal from main (phase 2)baude2019-06-27
|/ | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Fix a segfault in 'podman ps --sync'Matthew Heon2019-06-24
| | | | | | | | | | We weren't properly populating the container's OCI Runtime in Batch(), causing segfaults on attempting to access it. Add a test to make sure we actually catch cases like this in the future. Fixes #3411 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Begin adding support for multiple OCI runtimesMatthew Heon2019-06-19
| | | | | | | | | | | | | Allow Podman containers to request to use a specific OCI runtime if multiple runtimes are configured. This is the first step to properly supporting containers in a multi-runtime environment. The biggest changes are that all OCI runtimes are now initialized when Podman creates its runtime, and containers now use the runtime requested in their configuration (instead of always the default runtime). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* stop/kill: inproper state errors: s/in state/is in state/Valentin Rothberg2019-06-17
| | | | Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* kill: print ID and state for non-running containersValentin Rothberg2019-06-17
| | | | | | | | Extend kill's error message to include the container's ID and state. This address cases where error messages caused by other containers may confuse users. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* If container is not in correct state podman exec should exit with 126Daniel J Walsh2019-06-12
| | | | | | | | | | | | This way a tool can determine if the container exists or not, but is in the wrong state. Since 126 is documeted as: **_126_** if the **_contained command_** cannot be invoked It makes sense that the container would exit with this state. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #3180 from mheon/inspect_volumesOpenShift Merge Robot2019-06-08
|\ | | | | Begin to break up pkg/inspect
| * Begin to break up pkg/inspectMatthew Heon2019-06-03
| | | | | | | | | | | | | | | | | | | | Let's put inspect structs where they're actually being used. We originally made pkg/inspect to solve circular import issues. There are no more circular import issues. Image structs remain for now, I'm focusing on container inspect. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | migration: add possibility to restore a container with a new nameAdrian Reber2019-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The option to restore a container from an external checkpoint archive (podman container restore -i /tmp/checkpoint.tar.gz) restores a container with the same name and same ID as id had before checkpointing. This commit adds the option '--name,-n' to 'podman container restore'. With this option the restored container gets the name specified after '--name,-n' and a new ID. This way it is possible to restore one container multiple times. If a container is restored with a new name Podman will not try to request the same IP address for the container as it had during checkpointing. This implicitly assumes that if a container is restored from a checkpoint archive with a different name, that it will be restored multiple times and restoring a container multiple times with the same IP address will fail as each IP address can only be used once. Signed-off-by: Adrian Reber <areber@redhat.com>
* | Added support to migrate containersAdrian Reber2019-06-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds an option to the checkpoint command to export a checkpoint into a tar.gz file as well as importing a checkpoint tar.gz file during restore. With all checkpoint artifacts in one file it is possible to easily transfer a checkpoint and thus enabling container migration in Podman. With the following steps it is possible to migrate a running container from one system (source) to another (destination). Source system: * podman container checkpoint -l -e /tmp/checkpoint.tar.gz * scp /tmp/checkpoint.tar.gz destination:/tmp Destination system: * podman pull 'container-image-as-on-source-system' * podman container restore -i /tmp/checkpoint.tar.gz The exported tar.gz file contains the checkpoint image as created by CRIU and a few additional JSON files describing the state of the checkpointed container. Now the container is running on the destination system with the same state just as during checkpointing. If the container is kept running on the source system with the checkpoint flag '-R', the result will be that the same container is running on two different hosts. Signed-off-by: Adrian Reber <areber@redhat.com>
* | Added helper functions for container migrationAdrian Reber2019-06-03
|/ | | | | | | | This adds a couple of function in structure members needed in the next commit to make container migration actually work. This just splits of the function which are not modifying existing code. Signed-off-by: Adrian Reber <areber@redhat.com>
* container: move channel close to its writerGiuseppe Scrivano2019-05-20
| | | | | | let the writer of the channel close it. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Ensure that start() in StartAndAttach() is lockedMatthew Heon2019-05-14
| | | | | | | | | | | | | StartAndAttach() runs start() in a goroutine, which can allow it to fire after the caller returns - and thus, after the defer to unlock the container lock has fired. The start() call _must_ occur while the container is locked, or else state inconsistencies may occur. Fixes #3114 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Address review comments on restart policyMatthew Heon2019-05-03
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move to using constants for valid restart policy typesMatthew Heon2019-05-03
| | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add support for retry count with --restart flagMatthew Heon2019-05-03
| | | | | | | | | The on-failure restart option supports restarting only a given number of times. To do this, we need one additional field in the DB to track restart count (which conveniently fills a field in Inspect we weren't populating), plus some plumbing logic. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Sending signals to containers prevents restart policyMatthew Heon2019-05-03
| | | | | | Noticed this when testing some behavior with Docker. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add container restart policy to Libpod & PodmanMatthew Heon2019-05-03
| | | | | | | This initial version does not support restart count, but it works as advertised otherwise. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add basic structure of podman init commandMatthew Heon2019-05-01
| | | | | | | | | | | | | As part of this, rework the number of workers used by various Podman tasks to match original behavior - need an explicit fallthrough in the switch statement for that block to work as expected. Also, trivial change to Podman cleanup to work on initialized containers - we need to reset to a different state after cleaning up the OCI runtime. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Implement podman-remote rmJhon Honce2019-04-09
| | | | | | | | | * refactor command output to use one function * Add new worker pool parallel operations * Implement podman-remote umount * Refactored podman wait to use printCmdOutput() Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Remove wait eventMatthew Heon2019-03-29
| | | | | | | It's not necessary to log an event for a read-only operation like wait. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #2621 from mheon/event_on_deathOpenShift Merge Robot2019-03-13
|\ | | | | Add event on container death
| * Add event on container deathMatthew Heon2019-03-13
| | | | | | | | Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* | Vendor docker/docker, fsouza and more #2TomSweeneyRedHat2019-03-13
|/ | | | | | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Vendors in fsouza/docker-client, docker/docker and a few more related. Of particular note, changes to the TweakCapabilities() function from docker/docker along with the parse.IDMappingOptions() function from Buildah. Please pay particular attention to the related changes in the call from libpod to those functions during the review. Passes baseline tests.
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* exec: support --preserve-fdsGiuseppe Scrivano2019-03-02
| | | | | | | | Allow to pass additional FDs to the process being executed. Closes: https://github.com/containers/libpod/issues/2372 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Allow Exec API user to override streamsPeter Hunt2019-02-28
| | | | | | Allow passing in of AttachStreams to libpod.Exec() for usage in podman healthcheck. An API caller can now specify different streams for stdout, stderr and stdin, or no streams at all. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* OpenTracing support added to start, stop, run, create, pull, and psSebastian Jug2019-02-18
| | | | | | Drop context.Context field from cli.Context Signed-off-by: Sebastian Jug <sejug@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-06 01:47:57 +0000