summaryrefslogtreecommitdiff
path: root/libpod/container_api.go
Commit message (Collapse)AuthorAge
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* exec: support --preserve-fdsGiuseppe Scrivano2019-03-02
| | | | | | | | Allow to pass additional FDs to the process being executed. Closes: https://github.com/containers/libpod/issues/2372 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Allow Exec API user to override streamsPeter Hunt2019-02-28
| | | | | | Allow passing in of AttachStreams to libpod.Exec() for usage in podman healthcheck. An API caller can now specify different streams for stdout, stderr and stdin, or no streams at all. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* OpenTracing support added to start, stop, run, create, pull, and psSebastian Jug2019-02-18
| | | | | | Drop context.Context field from cli.Context Signed-off-by: Sebastian Jug <sejug@redhat.com>
* pod infra container is started before a container in a pod is run, started, ↵Peter Hunt2019-02-15
| | | | | | | | | | or attached. Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod. Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix. Signed-off-by: Peter Hunt <pehunt@redhat.com>
* Add darwin support for remote-clientbaude2019-01-11
| | | | | | | | Add the ability to cross-compile podman remote for OSX. Also, add image exists and tag to remote-client. Signed-off-by: baude <bbaude@redhat.com>
* Add a --workdir option to 'podman exec'Debarshi Ray2019-01-08
| | | | Signed-off-by: Debarshi Ray <rishi@fedoraproject.org>
* Add locking to Sync() on containersMatthew Heon2018-12-06
| | | | | | | | Previously not needed as it only worked inside of Batch(), but now that it can be called anywhere we need to add mutual exclusion on its config changes. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add --sync option to podman rmMatthew Heon2018-12-06
| | | | | | | | | | | With the changes made recently to ensure Podman does not hit the OCI runtime as often to sync state, we can find ourselves in a situation where the runtime's state does not match ours. Add a --sync flag to podman rm to ensure we can still remove containers when this happens. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Fix golang formatting issuesbaude2018-11-28
| | | | | | | Whe running unittests on newer golang versions, we observe failures with some formatting types when no declared correctly. Signed-off-by: baude <bbaude@redhat.com>
* Merge pull request #1848 from adrianreber/masterOpenShift Merge Robot2018-11-28
|\ | | | | Add tcp-established to checkpoint/restore
| * Added tcp-established to checkpoint/restoreAdrian Reber2018-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIU can checkpoint and restore processes/containers with established TCP connections if the correct option is specified. To implement checkpoint and restore with support for established TCP connections with Podman this commit adds the necessary options to runc during checkpoint and also tells conmon during restore to use 'runc restore' with '--tcp-established'. For this Podman feature to work a corresponding conmon change is required. Example: $ podman run --tmpfs /tmp --name podman-criu-test -d docker://docker.io/yovfiatbeb/podman-criu-test $ nc `podman inspect -l | jq -r '.[0].NetworkSettings.IPAddress'` 8080 GET /examples/servlets/servlet/HelloWorldExample Connection: keep-alive 1 GET /examples/servlets/servlet/HelloWorldExample Connection: keep-alive 2 $ # Using HTTP keep-alive multiple requests are send to the server in the container $ # Different terminal: $ podman container checkpoint -l criu failed: type NOTIFY errno 0 $ # Looking at the log file would show errors because of established TCP connections $ podman container checkpoint -l --tcp-established $ # This works now and after the restore the same connection as above can be used for requests $ podman container restore -l --tcp-established The restore would fail without '--tcp-established' as the checkpoint image contains established TCP connections. Signed-off-by: Adrian Reber <areber@redhat.com>
| * Use also a struct to pass options to Restore()Adrian Reber2018-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | This is basically the same change as ff47a4c2d5485fc49f937f3ce0c4e2fd6bdb1956 (Use a struct to pass options to Checkpoint()) just for the Restore() function. It is used to pass multiple restore options to the API and down to conmon which is used to restore containers. This is for the upcoming changes to support checkpointing and restoring containers with '--tcp-established'. Signed-off-by: Adrian Reber <areber@redhat.com>
* | exec: don't wait for pidfile when the runtime exitedGiuseppe Scrivano2018-11-27
|/ | | | | | | | | | | don't wait for the timeout to expire if the runtime process exited. I've noticed podman to hang on exit and keeping the container lock taken when the OCI runtime already exited. Additionally, it reduces the waiting time as we won't hit the 25 milliseconds waiting time in the worst case. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Added option to keep containers running after checkpointingAdrian Reber2018-11-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIU supports to leave processes running after checkpointing: -R|--leave-running leave tasks in running state after checkpoint runc also support to leave containers running after checkpointing: --leave-running leave the process running after checkpointing With this commit the support to leave a container running after checkpointing is brought to Podman: --leave-running, -R leave the container running after writing checkpoint to disk Now it is possible to checkpoint a container at some point in time without stopping the container. This can be used to rollback the container to an early state: $ podman run --tmpfs /tmp --name podman-criu-test -d docker://docker.io/yovfiatbeb/podman-criu-test $ curl 10.88.64.253:8080/examples/servlets/servlet/HelloWorldExample 3 $ podman container checkpoint -R -l $ curl 10.88.64.253:8080/examples/servlets/servlet/HelloWorldExample 4 $ curl 10.88.64.253:8080/examples/servlets/servlet/HelloWorldExample 5 $ podman stop -l $ podman container restore -l $ curl 10.88.64.253:8080/examples/servlets/servlet/HelloWorldExample 4 So after checkpointing the container kept running and was stopped after some time. Restoring this container will restore the state right at the checkpoint. Signed-off-by: Adrian Reber <areber@redhat.com>
* Use a struct to pass options to Checkpoint()Adrian Reber2018-11-20
| | | | | | | | | For upcoming changes to the Checkpoint() functions this commit switches checkpoint options from a boolean to a struct, so that additional options can be passed easily to Checkpoint() without changing the function parameters all the time. Signed-off-by: Adrian Reber <areber@redhat.com>
* Increase pidWaitTimeout to 60sEmilien Macchi2018-11-15
| | | | | | | | | | | At scale, it appears that we sometimes hit the 1000ms timeout to create the PID file when a container is created or executed. Increasing the value to 60s should help when running a lot of containers in heavy-loaded environment. Related #1495 Fixes #1816 Signed-off-by: Emilien Macchi <emilien@redhat.com>
* Merge pull request #1771 from baude/prepareOpenShift Merge Robot2018-11-07
|\ | | | | move defer'd function declaration ahead of prepare error return
| * move defer'd function declaration ahead of prepare error returnbaude2018-11-07
| | | | | | | | Signed-off-by: baude <bbaude@redhat.com>
* | EXPERIMENTAL: Do not call out to runc for syncMatthew Heon2018-11-07
|/ | | | | | | | | | | | | | | When syncing container state, we normally call out to runc to see the container's status. This does have significant performance implications, though, and we've seen issues with large amounts of runc processes being spawned. This patch attempts to use stat calls on the container exit file created by Conmon instead to sync state. This massively decreases the cost of calling updateContainer (it has gone from an almost-unconditional fork/exec of runc to a single stat call that can be avoided in most states). Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Merge pull request #1715 from baude/getusergroupOpenShift Merge Robot2018-10-30
|\ | | | | get user and group information using securejoin and runc's user library
| * get user and group information using securejoin and runc's user librarybaude2018-10-29
| | | | | | | | | | | | | | | | | | | | | | for the purposes of performance and security, we use securejoin to contstruct the root fs's path so that symlinks are what they appear to be and no pointing to something naughty. then instead of chrooting to parse /etc/passwd|/etc/group, we now use the runc user/group methods which saves us quite a bit of performance. Signed-off-by: baude <bbaude@redhat.com>
* | unmount: fix error logicValentin Rothberg2018-10-29
|/ | | | | | | | | Only return `ErrCtrStateInvalid` errors when the mount counter is equal to 1. Also fix the "can't unmount [...] last mount[..]" error which hasn't been returned when the error passed to `errors.Errorf()` is nil. Fixes: #1695 Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
* Make podman ps fastbaude2018-10-23
| | | | | | Like Ricky Bobby, we want to go fast. Signed-off-by: baude <bbaude@redhat.com>
* Add support to checkpoint/restore containersAdrian Reber2018-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | runc uses CRIU to support checkpoint and restore of containers. This brings an initial checkpoint/restore implementation to podman. None of the additional runc flags are yet supported and container migration optimization (pre-copy/post-copy) is also left for the future. The current status is that it is possible to checkpoint and restore a container. I am testing on RHEL-7.x and as the combination of RHEL-7 and CRIU has seccomp troubles I have to create the container without seccomp. With the following steps I am able to checkpoint and restore a container: # podman run --security-opt="seccomp=unconfined" -d registry.fedoraproject.org/f27/httpd # curl -I 10.22.0.78:8080 HTTP/1.1 403 Forbidden # <-- this is actually a good answer # podman container checkpoint <container> # curl -I 10.22.0.78:8080 curl: (7) Failed connect to 10.22.0.78:8080; No route to host # podman container restore <container> # curl -I 10.22.0.78:8080 HTTP/1.1 403 Forbidden I am using CRIU, runc and conmon from git. All required changes for checkpoint/restore support in podman have been merged in the corresponding projects. To have the same IP address in the restored container as before checkpointing, CNI is told which IP address to use. If the saved network configuration cannot be found during restore, the container is restored with a new IP address. For CRIU to restore established TCP connections the IP address of the network namespace used for restore needs to be the same. For TCP connections in the listening state the IP address can change. During restore only one network interface with one IP address is handled correctly. Support to restore containers with more advanced network configuration will be implemented later. v2: * comment typo * print debug messages during cleanup of restore files * use createContainer() instead of createOCIContainer() * introduce helper CheckpointPath() * do not try to restore a container that is paused * use existing helper functions for cleanup * restructure code flow for better readability * do not try to restore if checkpoint/inventory.img is missing * git add checkpoint.go restore.go v3: * move checkpoint/restore under 'podman container' v4: * incorporated changes from latest reviews Signed-off-by: Adrian Reber <areber@redhat.com>
* Add ContainerStateExited and OCI delete() in cleanup()Matthew Heon2018-10-02
| | | | | | | | | | | | | | | | To work better with Kata containers, we need to delete() from the OCI runtime as a part of cleanup, to ensure resources aren't retained longer than they need to be. To enable this, we need to add a new state to containers, ContainerStateExited. Containers transition from ContainerStateStopped to ContainerStateExited via cleanupRuntime which is invoked as part of cleanup(). A container in the Exited state is identical to Stopped, except it has been removed from the OCI runtime and thus will be handled differently when initializing the container. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Refactor Wait() to not require a timeoutMatthew Heon2018-09-21
| | | | | | | | | | | We added a timeout for convenience, but most invocations don't care about it. Refactor it into WaitWithTimeout() and add a Wait() that doesn't require a timeout and uses the default. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1527 Approved by: mheon
* Increase pidWaitTimeout to 1000msEmilien Macchi2018-09-18
| | | | | | | | | | | | | | | | | When managing the containers with systemd, it takes a bit more than 250ms to have podman creating the pidfile. Increasing the value to 1 second will avoid timeout issues when running a lot of containers managed by systemd. This patch was tested in a VM with 56 services (OpenStack) deployed by TripleO and managed by systemd. Fixes #1495 Signed-off-by: Emilien Macchi <emilien@redhat.com> Closes: #1497 Approved by: rhatdan
* Add --interval flag to podman waitDaniel J Walsh2018-09-13
| | | | | | | Waiting uses a lot of CPU, so drop back to checking once/second and allow user to pass in the interval. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Up time between checks for podman waitMatthew Heon2018-08-31
| | | | | | | | | Prior to this patch, we were polling continuously to check if a container had died. This patch changes this to poll 10 times a second, which should be more than sufficient and drastically reduce CPU utilization. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* rootless: exec handle processes that create an user namespaceGiuseppe Scrivano2018-08-26
| | | | | | | | | | | | | | Manage the case where the main process of the container creates and joins a new user namespace. In this case we want to join only the first child in the new hierarchy, which is the user namespace that was used to create the container. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #1331 Approved by: rhatdan
* Properly translate users into runc format for execMatthew Heon2018-08-23
| | | | | | | | | | | Runc exec expects the --user flag to be formatted as UID:GID. Use chrootuser code to translate whatever user is passed to exec into this format. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1315 Approved by: vrothberg
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* We need to sort mounts so that one mount does not over mount another.Daniel J Walsh2018-08-10
| | | | | | | | | | | | | | | | | Currently we add mounts from images, volumes and internal. We can accidently over mount an existing mount. This patch sorts the mounts to make sure a parent directory is always mounted before its content. Had to change the default propagation on image volume mounts from shared to private to stop mount points from leaking out of the container. Also switched from using some docker/docker/pkg to container/storage/pkg to remove some dependencies on Docker. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1243 Approved by: mheon
* Add --force to podman umount to force the unmounting of the rootfsDaniel J Walsh2018-08-01
| | | | | | | | | | | | podman umount will currently only unmount file system if not other process is using it, otherwise the umount decrements the container storage to indicate that the caller is no longer using the mount point, once the count gets to 0, the file system is actually unmounted. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1184 Approved by: TomSweeneyRedHat
* Added pod.Restart() functionality to libpod.haircommander2018-07-25
| | | | | | | | | | | Moved contents of RestartWithTimeout to restartWithTimeout in container_internal to be able to call restart without locking in function. Refactored startNode to be able to either start or restart a node. Built pod Restart() with new startNode with refresh true. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1152 Approved by: rhatdan
* Let containers/storage keep track of mountsDaniel J Walsh2018-07-19
| | | | | | | | | | | Currently we unmount storage that is still in use. We should not be unmounting storeage that we mounted via a different command or by podman mount. This change relies on containers/storage to umount keep track of how many times the storage was mounted before really unmounting it from the system. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Allow Init() on stopped containersMatthew Heon2018-07-09
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #1068 Approved by: baude
* Make CGroups cleanup optional on whether they existMatthew Heon2018-06-22
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #981 Approved by: baude
* Add Refresh() to ctrs to refresh state after db changeMatthew Heon2018-06-22
| | | | | | | | | | The Refresh() function is used to reset a container's state after a database format change to state is made that requires migration Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #981 Approved by: baude
* We are using err in defer function, needs to be defined nameDaniel J Walsh2018-06-22
| | | | | | | | | | Since we are checking if err is non nil in defer function we need to define it, so that the check will work correctly. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #985 Approved by: mheon
* libpod: fix race with attach/startGiuseppe Scrivano2018-06-20
| | | | | | | | | | | Move the StartContainer call after the attach to the UNIX socket. It solves a race where the StartContainer could be done earlier and a short-lived container could already exit by the time we tried to attach to the socket. Closes: https://github.com/projectatomic/libpod/issues/835 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Optionally init() during container restartMatthew Heon2018-05-04
| | | | | | | | | | | This allows us to restart containers that have never been started without error. This makes RestartWithTimeout work with running, stopped, and created containers. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #719 Approved by: rhatdan
* varlink containersbaude2018-05-03
| | | | | | | | | | | | | first pass at adding in the container related endpoints/methods for the libpod backend. Couple of important notes: * endpoints that can use a console are not going to be done until we have "remote" console * several of the container methods should probably be able to stream as opposed to a one-off return Signed-off-by: baude <bbaude@redhat.com> Closes: #708 Approved by: baude
* Vendor in latest containers/image and contaners/storageumohnani82018-04-19
| | | | | | | | | Made necessary changes to functions to include contex.Context wherever needed Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #640 Approved by: baude
* Change container.locked to batchedTomSweeneyRedHat2018-04-16
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #619 Approved by: mheon
* Change attach to accept a struct containing streamsMatthew Heon2018-04-13
| | | | | | | | | | | Comparing Go interfaces, like io.Reader, to nil does not work. As such, we need to include a bool with each stream telling whether to attach to it. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #608 Approved by: baude
* Changes to attach to enable per-stream attachingMatthew Heon2018-04-13
| | | | | | | | | | This allows us to attach to attach to just stdout or stderr or stdin, or any combination of these. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #608 Approved by: baude
* Fix locking interaction in batched Exec() on containerMatthew Heon2018-04-13
| | | | | | | Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #610 Approved by: giuseppe
* Use buildah commit for podman commitbaude2018-04-10
| | | | | | | | Resolves: #586 and #520 Signed-off-by: baude <bbaude@redhat.com> Closes: #592 Approved by: mheon
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 06:13:23 +0000