| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
Add a `context.Context` to the log APIs to allow for cancelling
streaming (e.g., via `podman logs -f`). This fixes issues for
the remote API where some go routines of the server will continue
writing and produce nothing but heat and waste CPU cycles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes #6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
- misspell
- prealloc
- unparam
- nakedret
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
| |
* Add ErrLostSync to report lost of sync when de-mux'ing stream
* Add logus.SetLevel(logrus.DebugLevel) when `go test -v` given
* Add context to debugging messages
Signed-off-by: Jhon Honce <jhonce@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A few major fixes here:
- Support for attaching to Configured containers, to match Docker
behavior.
- Support for stream parameter has been improved (we now properly
handle cases where it is not set).
- Initial support for logs parameter has been added.
- Setting attach streams when the container has a terminal is now
supported.
- Errors are properly reported once the hijack has begun.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
| |
add the ability to attach to a running container. the tunnel side of this is not enabled yet as we have work on the endpoints and plumbing to do yet.
add the ability to exec a command in a running container. the tunnel side is also being deferred for same reason.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
This reverts commit 4b72f9e4013411208751df2a92ab9f322d4da5b2.
Continues what began with revert of
d3d97a25e8c87cf741b2e24ac01ef84962137106 in previous commit.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
This reverts commit d3d97a25e8c87cf741b2e24ac01ef84962137106.
This does not resolve the issues we expected it would, and has
some unexpected side effects with the upcoming exec rework.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
This reverts commit 4632b81c81a73025a960e339f40bc805f8a6c70a.
We are reverting #5373 as well, which lays the foundation for
this commit, so it has to go as well.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
| |
this is a cosmetic change that makes sure podman returns a sane error code when conmon dies underneath it
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
| |
Before, we were using -1 as a bogus value in podman to signify something went wrong when reading from a conmon pipe. However, conmon uses negative values to indicate the runtime failed, and return the runtime's exit code.
instead, we should use a bogus value that is actually bogus. Define that value in the define package as MinInt32 (-1<< 31 - 1), which is outside of the range of possible pids (-1 << 31)
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
| |
Before, we were getting the exit code from the file, in which we waited an arbitrary amount of time (5 seconds) for the file, and segfaulted if we didn't find it. instead, we should be a bit more certain conmon has sent the exit code. Luckily, it sends the exit code along the sync pipe fd, so we can read it from there
Adapt the ExecContainer interface to pass along a channel to get the pid and exit code from conmon, to be able to read both from the pipe
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch allows users to specify the list of capabilities required
to run their container image.
Setting a image/container label "io.containers.capabilities=setuid,setgid"
tells podman that the contained image should work fine with just these two
capabilties, instead of running with the default capabilities, podman will
launch the container with just these capabilties.
If the user or image specified capabilities that are not in the default set,
the container will print an error message and will continue to run with the
default capabilities.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |\
| |
| | |
rework apiv2 wait endpoint|binding
|
| | |
| |
| |
| |
| |
| |
| |
| | |
added the ability to wait on a condition (stopped, running, paused...) for a container. if a condition is not provided, wait will default to the stopped condition which uses the original wait code paths. if the condition is stopped, the container exit code will be returned.
also, correct a mux issue we discovered.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |/
|
|
|
|
|
|
| |
This corrects a regression from Podman 1.4.x where container exec
sessions inherited supplemental groups from the container, iff
the exec session did not specify a user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
Add pkg/capabibilities to deal with capabilities. The code has been
copied from Docker (and attributed with the copyright) but changed
significantly to only do what we really need. The code has also been
simplified and will perform better due to removed redundancy.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new APIv2 branch provides an HTTP-based remote API to Podman.
The requirements of this are, unfortunately, incompatible with
the existing Attach API. For non-terminal attach, we need append
a header to what was copied from the container, to multiplex
STDOUT and STDERR; to do this with the old API, we'd need to copy
into an intermediate buffer first, to handle the headers.
To avoid this, provide a new API to handle all aspects of
terminal and non-terminal attach, including closing the hijacked
HTTP connection. This might be a bit too specific, but for now,
it seems to be the simplest approach.
At the same time, add a Resize endpoint. This needs to be a
separate endpoint, so our existing channel approach does not work
here.
I wanted to rework the rest of attach at the same time (some
parts of it, particularly how we start the Attach session and how
we do resizing, are (in my opinion) handled much better here.
That may still be on the table, but I wanted to avoid breaking
existing APIs in this already massive change.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
When a container is in a PID namespace, it is enought to send
the stop signal to the PID 1 of the namespace, only send signals
to all processes in the container when the container is not in
a pid namespace.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We currently rely on exec sessions being removed from the state
by the Exec() API itself, on detecting the session stopping. This
is not a reliable method, though. The Podman frontend for exec
could be killed before the session ended, or another Podman
process could be holding the lock and prevent update (most
notable in `run --rm`, when a container with an active exec
session is stopped).
To resolve this, add a function to reap active exec sessions from
the state, and use it on cleanup (to clear sessions after the
container stops) and remove (to do the same when --rm is passed).
This is a bit more complicated than it ought to be because Kata
and company exist, and we can't guarantee the exec session has a
PID on the host, so we have to plumb this through to the OCI
runtime.
Fixes #4666
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When Libpod removes a container, there is the possibility that
removal will not fully succeed. The most notable problems are
storage issues, where the container cannot be removed from
c/storage.
When this occurs, we were faced with a choice. We can keep the
container in the state, appearing in `podman ps` and available for
other API operations, but likely unable to do any of them as it's
been partially removed. Or we can remove it very early and clean
up after it's already gone. We have, until now, used the second
approach.
The problem that arises is intermittent problems removing
storage. We end up removing a container, failing to remove its
storage, and ending up with a container permanently stuck in
c/storage that we can't remove with the normal Podman CLI, can't
use the name of, and generally can't interact with. A notable
cause is when Podman is hit by a SIGKILL midway through removal,
which can consistently cause `podman rm` to fail to remove
storage.
We now add a new state for containers that are in the process of
being removed, ContainerStateRemoving. We set this at the
beginning of the removal process. It notifies Podman that the
container cannot be used anymore, but preserves it in the DB
until it is fully removed. This will allow Remove to be run on
these containers again, which should successfully remove storage
if it fails.
Fixes #3906
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
| |
I basically copied and adapted the statements for setting IP.
Closes #1136
Signed-off-by: Jakub Filak <jakub.filak@sap.com>
|
| |
|
|
|
|
|
|
| |
There were many situations that made exec act funky with input. pipes didn't work as expected, as well as sending input before the shell opened.
Thinking about it, it seemed as though the issues were because of how os.Stdin buffers (it doesn't). Dropping this input had some weird consequences.
Instead, read from os.Stdin as bufio.Reader, allowing the input to buffer before passing it to the container.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have a lot of checks for container state scattered throughout
libpod. Many of these need to ensure the container is in one of a
given set of states so an operation may safely proceed.
Previously there was no set way of doing this, so we'd use unique
boolean logic for each one. Introduce a helper to standardize
state checks.
Note that this is only intended to replace checks for multiple
states. A simple check for one state (ContainerStateRunning, for
example) should remain a straight equality, and not use this new
helper.
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a container is created with a given OCI runtime, but then it
is uninstalled or removed from the configuration file, Libpod
presently reacts very poorly. The EvictContainer code can
potentially remove these containers, but we still can't see them
in `podman ps` (aside from the massive logrus.Errorf messages
they create).
Providing a minimal OCI runtime implementation for missing
runtimes allows us to behave better. We'll be able to retrieve
containers from the database, though we still pop up an error for
each missing runtime. For containers which are stopped, we can
remove them as normal.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
This change matches what is happening on the podman local side
and should eliminate a race condition.
Also exit commands on the server side should start to return to client.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
| |
We have leaked the exit number codess all over the code, this patch
removes the numbers to constants.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
use the inotify backend to be notified on the container exit instead
of polling continuosly the runtime. Polling the runtime slowns
significantly down the podman execution time for short lived
processes:
$ time bin/podman run --rm -ti fedora true
real 0m0.324s
user 0m0.088s
sys 0m0.064s
from:
$ time podman run --rm -ti fedora true
real 0m4.199s
user 0m5.339s
sys 0m0.344s
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
| |
Before, if the container was run with a specified user that wasn't root, exec would fail because it always set to root unless respecified by user.
instead, inherit the user from the container start.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |\
| |
| | |
restore: added --ignore-static-ip option
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If a container is restored multiple times from an exported checkpoint
with the help of '--import --name', the restore will fail if during
'podman run' a static container IP was set with '--ip'. The user can
tell the restore process to ignore the static IP with
'--ignore-static-ip'.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
| |
When forcibly removing a container, we are initiating an explicit
stop of the container, which is not reflected in 'podman events'.
Swap to using our standard 'stop()' function instead of a custom
one for force-remove, and move the event into the internal stop
function (so internal calls also register it).
This does add one more database save() to `podman remove`. This
should not be a terribly serious performance hit, and does have
the desirable side effect of making things generally safer.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
|
| |
There's no way to get the error if we successfully get an exit code (as it's just printed to stderr instead).
instead of relying on the error to be passed to podman, and edit based on the error code, process it on the varlink side instead
Also move error codes to define package
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This includes:
Implement exec -i and fix some typos in description of -i docs
pass failed runtime status to caller
Add resize handling for a terminal connection
Customize exec systemd-cgroup slice
fix healthcheck
fix top
add --detach-keys
Implement podman-remote exec (jhonce)
* Cleanup some orphaned code (jhonce)
adapt remote exec for conmon exec (pehunt)
Fix healthcheck and exec to match docs
Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error
Use these different errors in branching for exit code in healthcheck and exec
Set conmon to use new api version
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Peter Hunt <pehunt@redhat.com>
|
| |
|
|
|
|
|
| |
this is the third round of preparing to use the golangci-lint on our
code base.
Signed-off-by: baude <bbaude@redhat.com>
|
| |\
| |
| | |
Include changes to the container's root file-system in the checkpoint archive
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The newly added functionality to include the container's root
file-system changes into the checkpoint archive can now be explicitly
disabled. Either during checkpoint or during restore.
If a container changes a lot of files during its runtime it might be
more effective to migrated the root file-system changes in some other
way and to not needlessly increase the size of the checkpoint archive.
If a checkpoint archive does not contain the root file-system changes
information it will automatically be skipped. If the root file-system
changes are part of the checkpoint archive it is also possible to tell
Podman to ignore these changes.
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| | |
| |
| |
| | |
Signed-off-by: Adrian Reber <areber@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We have another patch running to do the same for exit files, with
a much more in-depth explanation of why it's necessary. Suffice
to say that persistent files in tmpfs tied to container CGroups
lead to significant memory allocations that last for the lifetime
of the file.
Based on a patch by Andrea Arcangeli (aarcange@redhat.com).
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |/
|
|
|
|
| |
clean up and prepare to migrate to the golangci-linter
Signed-off-by: baude <bbaude@redhat.com>
|
| |\
| |
| | |
libpod: specify a detach keys sequence in libpod.conf
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When a container is attached upon start, the WaitGroup counter may
never be decremented if an error is raised before start, causing
the caller to hang.
Synchronize with the start & attach goroutine using a channel, to be
able to detect failures before start.
Signed-off-by: Marco Vedovati <mvedovati@suse.com>
|
| |/
|
|
|
|
| |
this is phase 2 for the removal of libpod from main.
Signed-off-by: baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
|
