summaryrefslogtreecommitdiff
path: root/libpod/container_commit.go
Commit message (Collapse)AuthorAge
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Deprecate & remove IsCtrSpecific in favor of IsAnonMatthew Heon2020-01-29
| | | | | | | | | | | | | | | | | | | In Podman 1.6.3, we added support for anonymous volumes - fixing our old, broken support for named volumes that were created with containers. Unfortunately, this reused the database field we used for the old implementation, and toggled volume removal on for `podman run --rm` - so now, we were removing *named* volumes created with older versions of Podman. We can't modify these old volumes in the DB, so the next-safest thing to do is swap to a new field to indicate volumes should be removed. Problem: Volumes created with 1.6.3 and up until this lands, even anonymous volumes, will not be removed. However, this is safer than removing too many volumes, as we were doing before. Fixes #5009 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Initial commit on compatible APIJhon Honce2020-01-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jhon Honce <jhonce@redhat.com> Create service command Use cd cmd/service && go build . $ systemd-socket-activate -l 8081 cmd/service/service & $ curl http://localhost:8081/v1.24/images/json Signed-off-by: Jhon Honce <jhonce@redhat.com> Correct Makefile Signed-off-by: Jhon Honce <jhonce@redhat.com> Two more stragglers Signed-off-by: Jhon Honce <jhonce@redhat.com> Report errors back as http headers Signed-off-by: Jhon Honce <jhonce@redhat.com> Split out handlers, updated output Output aligned to docker structures Signed-off-by: Jhon Honce <jhonce@redhat.com> Refactored routing, added more endpoints and types * Encapsulated all the routing information in the handler_* files. * Added more serviceapi/types, including podman additions. See Info Signed-off-by: Jhon Honce <jhonce@redhat.com> Cleaned up code, implemented info content * Move Content-Type check into serviceHandler * Custom 404 handler showing the url, mostly for debugging * Refactored images: better method names and explicit http codes * Added content to /info * Added podman fields to Info struct * Added Container struct Signed-off-by: Jhon Honce <jhonce@redhat.com> Add a bunch of endpoints containers: stop, pause, unpause, wait, rm images: tag, rmi, create (pull only) Signed-off-by: baude <bbaude@redhat.com> Add even more handlers * Add serviceapi/Error() to improve error handling * Better support for API return payloads * Renamed unimplemented to unsupported these are generic endpoints we don't intend to ever support. Swarm broken out since it uses different HTTP codes to signal that the node is not in a swarm. * Added more types * API Version broken out so it can be validated in the future Signed-off-by: Jhon Honce <jhonce@redhat.com> Refactor to introduce ServiceWriter Signed-off-by: Jhon Honce <jhonce@redhat.com> populate pods endpoints /libpod/pods/.. exists, kill, pause, prune, restart, remove, start, stop, unpause Signed-off-by: baude <bbaude@redhat.com> Add components to Version, fix Error body Signed-off-by: Jhon Honce <jhonce@redhat.com> Add images pull output, fix swarm routes * docker-py tests/integration/api_client_test.py pass 100% * docker-py tests/integration/api_image_test.py pass 4/16 + Test failures include services podman does not support Signed-off-by: Jhon Honce <jhonce@redhat.com> pods endpoint submission 2 add create and others; only top and stats is left. Signed-off-by: baude <bbaude@redhat.com> Update pull image to work from empty registry Signed-off-by: Jhon Honce <jhonce@redhat.com> pod create and container create first pass at pod and container create. the container create does not quite work yet but it is very close. pod create needs a partial rewrite. also broken off the DELETE (rm/rmi) to specific handler funcs. Signed-off-by: baude <bbaude@redhat.com> Add docker-py demos, GET .../containers/json * Update serviceapi/types to reflect libpod not podman * Refactored removeImage() to provide non-streaming return Signed-off-by: Jhon Honce <jhonce@redhat.com> create container part2 finished minimal config needed for create container. started demo.py for upcoming talk Signed-off-by: baude <bbaude@redhat.com> Stop server after honoring request * Remove casting for method calls * Improve WriteResponse() * Update Container API type to match docker API Signed-off-by: Jhon Honce <jhonce@redhat.com> fix namespace assumptions cleaned up namespace issues with libpod. Signed-off-by: baude <bbaude@redhat.com> wip Signed-off-by: baude <bbaude@redhat.com> Add sliding window when shutting down server * Added a Timeout rather than closing down service on each call * Added gorilla/schema dependency for Decode'ing query parameters * Improved error handling * Container logs returned and multiplexed for stdout and stderr * .../containers/{name}/logs?stdout=True&stderr=True * Container stats * .../containers/{name}/stats Signed-off-by: Jhon Honce <jhonce@redhat.com> Improve error handling * Add check for at least one std stream required for /containers/{id}/logs * Add check for state in /containers/{id}/top * Fill in more fields for /info * Fixed error checking in service start code Signed-off-by: Jhon Honce <jhonce@redhat.com> get rest of image tests for pass Signed-off-by: baude <bbaude@redhat.com> linting our content Signed-off-by: baude <bbaude@redhat.com> more linting Signed-off-by: baude <bbaude@redhat.com> more linting Signed-off-by: baude <bbaude@redhat.com> pruning Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]apiv2 pods migrate from using args in the url to using a json struct in body for pod create. Signed-off-by: baude <bbaude@redhat.com> fix handler_images prune prune's api changed slightly to deal with filters. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]enabled base container create tests enabling the base container create tests which allow us to get more into the stop, kill, etc tests. many new tests now pass. Signed-off-by: baude <bbaude@redhat.com> serviceapi errors: append error message to API message I dearly hope this is not breaking any other tests but debugging "Internal Server Error" is not helpful to any user. In case, it breaks tests, we can rever the commit - that's why it's a small one. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> serviceAPI: add containers/prune endpoint Signed-off-by: Valentin Rothberg <rothberg@redhat.com> add `service` make target Also remove the non-functional sub-Makefile. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> add make targets for testing the service * `sudo make run-service` for running the service. * `DOCKERPY_TEST="tests/integration/api_container_test.py::ListContainersTest" \ make run-docker-py-tests` for running a specific tests. Run all tests by leaving the env variable empty. Signed-off-by: Valentin Rothberg <rothberg@redhat.com> Split handlers and server packages The files were split to help contain bloat. The api/server package will contain all code related to the functioning of the server while api/handlers will have all the code related to implementing the end points. api/server/register_* will contain the methods for registering endpoints. Additionally, they will have the comments for generating the swagger spec file. See api/handlers/version.go for a small example handler, api/handlers/containers.go contains much more complex handlers. Signed-off-by: Jhon Honce <jhonce@redhat.com> [CI:DOCS]enabled more tests Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]libpod endpoints small refactor for libpod inclusion and began adding endpoints. Signed-off-by: baude <bbaude@redhat.com> Implement /build and /events * Include crypto libraries for future ssh work Signed-off-by: Jhon Honce <jhonce@redhat.com> [CI:DOCS]more image implementations convert from using for to query structs among other changes including new endpoints. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add bindings for golang Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add volume endpoints for libpod create, inspect, ls, prune, and rm Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]apiv2 healthcheck enablement wire up container healthchecks for the api. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]Add mount endpoints via the api, allow ability to mount a container and list container mounts. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]Add search endpoint add search endpoint with golang bindings Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]more apiv2 development misc population of methods, etc Signed-off-by: baude <bbaude@redhat.com> rebase cleanup and epoch reset Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add more network endpoints also, add some initial error handling and convenience functions for standard endpoints. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]use helper funcs for bindings use the methods developed to make writing bindings less duplicative and easier to use. Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]add return info for prereview begin to add return info and status codes for errors so that we can review the apiv2 Signed-off-by: baude <bbaude@redhat.com> [CI:DOCS]first pass at adding swagger docs for api Signed-off-by: baude <bbaude@redhat.com>
* Add ONBUILD support to --changeMatthew Heon2019-12-05
| | | | | | | | | | | Return types had to change a bit for this, but since we can wrap the old v1.ImageConfig, changes are overall not particularly bad. At present, I believe this only works with commit, not import. This matches how things were before we changed to the new parsing so I think this is fine. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Move Commit() to new parsing for --changeMatthew Heon2019-12-05
| | | | | | | | | | | | | | | | | | | | It turns out we had two independent parsing impkementations for Dockerfile instructions out of --change. My previous commit fixed the one used in --change, but as I discovered to my dismay, commit used a different implementation. Remove that and use the new parsing implementation instead. While we're at it, fix some bugs in the current commit code. The addition of anonymous named volumes to Libpod recently means we can now include those in the image config when committing. Some changes (VOLUME, ENV, EXPOSE, LABEL) previously cleared the config of the former image when used; Docker does not do this, so I removed that behavior. Still needs fixing: the new implementation does not support ONBUILD, while the old one did. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* bump containers/image to v5.0.0, buildah to v1.11.4Nalin Dahyabhai2019-10-29
| | | | | | | | | Move to containers/image v5 and containers/buildah to v1.11.4. Replace an equality check with a type assertion when checking for a docker.ErrUnauthorizedForCredentials in `podman login`. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* Move OCI runtime implementation behind an interfaceMatthew Heon2019-10-10
| | | | | | | | | | | | For future work, we need multiple implementations of the OCI runtime, not just a Conmon-wrapped runtime matching the runc CLI. As part of this, do some refactoring on the interface for exec (move to a struct, not a massive list of arguments). Also, add 'all' support to Kill and Stop (supported by runc and used a bit internally for removing containers). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Update c/image to v4.0.1 and buildah to 1.11.3Miloslav Trmač2019-10-04
| | | | | | | | | | | | | | This requires updating all import paths throughout, and a matching buildah update to interoperate. I can't figure out the reason for go.mod tracking github.com/containers/image v3.0.2+incompatible // indirect ((go mod graph) lists it as a direct dependency of libpod, but (go list -json -m all) lists it as an indirect dependency), but at least looking at the vendor subdirectory, it doesn't seem to be actually used in the built binaries. Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* Fix commit --changes env=X=YJhon Honce2019-07-26
| | | | Signed-off-by: Jhon Honce <jhonce@redhat.com>
* libpod removal from main (phase 2)baude2019-06-27
| | | | | | this is phase 2 for the removal of libpod from main. Signed-off-by: baude <bbaude@redhat.com>
* remove libpod from mainbaude2019-06-25
| | | | | | | | | | | | | the compilation demands of having libpod in main is a burden for the remote client compilations. to combat this, we should move the use of libpod structs, vars, constants, and functions into the adapter code where it will only be compiled by the local client. this should result in cleaner code organization and smaller binaries. it should also help if we ever need to compile the remote client on non-Linux operating systems natively (not cross-compiled). Signed-off-by: baude <bbaude@redhat.com>
* Begin adding support for multiple OCI runtimesMatthew Heon2019-06-19
| | | | | | | | | | | | | Allow Podman containers to request to use a specific OCI runtime if multiple runtimes are configured. This is the first step to properly supporting containers in a multi-runtime environment. The biggest changes are that all OCI runtimes are now initialized when Podman creates its runtime, and containers now use the runtime requested in their configuration (instead of always the default runtime). Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Minor fix splitting env vars in podman-commitDivyansh Kamboj2019-05-19
| | | | | | | | | `string.Split()` splits into slice of size greater than 2 which may result in loss of environment variables fixes #3132 Signed-off-by: Divyansh Kamboj <kambojdivyansh2000@gmail.com>
* Fix podman command --change CMDDaniel J Walsh2019-04-17
| | | | | | | | | | | | | | | | | | Currently in Docker if you commit with --change 'CMD a b c' The command that gets added is [/bin/sh -c "a b c"] If you commit --change 'CMD ["a","b","c"]' You get [a b c] This patch set makes podman match this behaviour. Similar change required for Entrypoint. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Validate ENV/LABEL Change options in varlinkDaniel J Walsh2019-04-14
| | | | | | | | | If you pass in an invalid CHANGE ENV or LABEL option without the "=" character podman crashes. I see that there were other problems with the handling of commit --change handling. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --include-volumes flag to 'podman commit'Matthew Heon2019-04-11
| | | | | | | | | | | | | The 'docker commit' will never include a container's volumes when committing, without an explicit request through '--change'. Podman, however, defaulted to including user volumes as image volumes. Make this behavior depend on a new flag, '--include-volumes', and make the default behavior match Docker. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Add event logging to libpod, even display to podmanbaude2019-03-11
| | | | | | | | | | | | | | | | | In lipod, we now log major events that occurr. These events can be displayed using the `podman events` command. Each event contains: * Type (container, image, volume, pod...) * Status (create, rm, stop, kill, ....) * Timestamp in RFC3339Nano format * Name (if applicable) * Image (if applicable) The format of the event and the varlink endpoint are to not be considered stable until cockpit has done its enablement. Signed-off-by: baude <bbaude@redhat.com>
* Vendor Buildah v1.7TomSweeneyRedHat2019-02-22
| | | | | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Vendors in Buildah 1.7 into Podman. Also the latest imagebuilder and changes for `build --target` Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* Use sprintf to generate port numbers while committingMatthew Heon2019-01-02
| | | | | | | | | Casting integers to strings is definitely not correct, so let the standard library handle matters. Fixes #2066 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Vendor in new new buildah/cibaude2018-10-17
| | | | | | | libpod requires new buildah and container image versions to resolve bug #1640298 Signed-off-by: baude <bbaude@redhat.com>
* Vendor in latest containers/buildahDaniel J Walsh2018-09-18
| | | | | | Switch from projectatomic/buildah to containers/buildah Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Vendor in latest projectatomic/buildahumohnani82018-08-23
| | | | | | | | | | Fixes to podman build for unknown image and ADD with url when doing --layers. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #1330 Approved by: mheon
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* podman: accept option --rootfs to use exploded imagesGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* Add OnBuild support for podman buildDaniel J Walsh2018-06-01
| | | | | | Only supported for docker formated images. OCI Does not support this flag. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Make references to the Process part of Spec conditionalMatthew Heon2018-05-25
| | | | | | | | | | | The OCI runtime spec does not require Process to be passed (IE, it can be nil). Make most of our references to it conditional on it existing. Signed-off-by: Matthew Heon <mheon@redhat.com> Closes: #828 Approved by: mheon
* honor multiple change valuesbaude2018-05-21
| | | | | | | | | | | | In the case where changes are made to Env, Expose, Volumes, or labels, we should honor that multiple values are valid. Resolves: #795 Signed-off-by: baude <bbaude@redhat.com> Closes: #815 Approved by: mheon
* implement varlink commitbaude2018-05-15
| | | | | | | Signed-off-by: baude <bbaude@redhat.com> Closes: #762 Approved by: baude
* Make podman commit to localhost rather then docker.ioDaniel J Walsh2018-05-03
| | | | | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #715 Approved by: mheon
* Store user Volumes, Entrypoint, Command in databaseMatthew Heon2018-05-03
| | | | | | | | | | | We need these for commit, and they cannot be properly deduced from just the OCI spec, so save them in the database so we can retrieve them for commit. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #700 Approved by: rhatdan
* Print the Buildah comment from commit to given writerMatthew Heon2018-05-03
| | | | | | | | | Much better than unconditionally dumping to stdout Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #706 Approved by: rhatdan
* Do not print unnecessary Buildah details during commitMatthew Heon2018-05-03
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #706 Approved by: rhatdan
* do not commit default volumes from containerbaude2018-04-30
| | | | | | | | | | | when performing a container commit, we should not add the default list of volumes for a container to the resulting image. it will cause the resulting image to crash when run subsequently. Signed-off-by: baude <bbaude@redhat.com> Closes: #699 Approved by: mheon
* Use buildah commit and bud in podmanbaude2018-04-27
| | | | | | | | | | | Vendor in buildah and use as much of commit and bug as possible for podman build and commit. Resolves #586 Signed-off-by: baude <bbaude@redhat.com> Closes: #681 Approved by: mheon
* Vendor in latest containers/image and contaners/storageumohnani82018-04-19
| | | | | | | | | Made necessary changes to functions to include contex.Context wherever needed Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #640 Approved by: baude
* Change container.locked to batchedTomSweeneyRedHat2018-04-16
| | | | | | | Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com> Closes: #619 Approved by: mheon
* Use buildah commit for podman commitbaude2018-04-10
Resolves: #586 and #520 Signed-off-by: baude <bbaude@redhat.com> Closes: #592 Approved by: mheon
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-09-28 11:24:14 +0000