| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Podman inspect has to show exposed ports to match docker. This requires
storing the exposed ports in the container config.
A exposed port is shown as `"80/tcp": null` while a forwarded port is
shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`.
Also make sure to add the exposed ports to the new image when the
container is commited.
Fixes #10777
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
after the init containers pr merged, it was suggested to use `once`
instead of `oneshot` containers as it is more aligned with other
terminiology used similarily.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
| |
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |\
| |
| | |
Add support for environment variable secrets
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| | |
| |
| |
| |
| |
| | |
[NO TESTS NEEDED] This is just running codespell on podman
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |\ \
| |/
|/| |
Add podman run --timeout option
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
| |
- Persist CDIDevices in container config
- Add e2e test
- Log HasDevice error and add additional condition for safety
Signed-off-by: Sebastian Jug <seb@stianj.ug>
|
| |
|
|
| |
Signed-off-by: chenkang <kongchen28@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
| |
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Podman pre-1.8 also included a field with this name, which was a
String. Podman 2.2.0 added a new field reusing the name but as a
Struct. This completely broke JSON decode for pre-1.8 containers
in Podman 2.2, resulting in completely broken behavior.
Re-name the JSON field and add a note that the old name should
not be re-used to prevent this problem from re-occurring. This
will still result in containers from 2.2.0 being broken
(specifically, containers with image volumes will have them
disappear) but this is the lesser of two evils.
Fixes #8613
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert the existing network aliases set/remove code to network
connect and disconnect. We can no longer modify aliases for an
existing network, but we can add and remove entire networks. As
part of this, we need to add a new function to retrieve current
aliases the container is connected to (we had a table for this
as of the first aliases PR, but it was not externally exposed).
At the same time, remove all deconflicting logic for aliases.
Docker does absolutely no checks of this nature, and allows two
containers to have the same aliases, aliases that conflict with
container names, etc - it's just left to DNS to return all the
IP addresses, and presumably we round-robin from there? Most
tests for the existing code had to be removed because of this.
Convert all uses of the old container config.Networks field,
which previously included all networks in the container, to use
the new DB table. This ensures we actually get an up-to-date list
of in-use networks. Also, add network aliases to the output of
`podman inspect`.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |\
| |
| | |
Add network aliases for containers to DB
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This adds the database backend for network aliases. Aliases are
additional names for a container that are used with the CNI
dnsname plugin - the container will be accessible by these names
in addition to its name. Aliases are allowed to change over time
as the container connects to and disconnects from networks.
Aliases are implemented as another bucket in the database to
register all aliases, plus two buckets for each container (one to
hold connected CNI networks, a second to hold its aliases). The
aliases are only unique per-network, to the global and
per-container aliases buckets have a sub-bucket for each CNI
network that has aliases, and the aliases are stored within that
sub-bucket. Aliases are formatted as alias (key) to container ID
(value) in both cases.
Three DB functions are defined for aliases: retrieving current
aliases for a given network, setting aliases for a given network,
and removing all aliases for a given network.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we create a container, we assign a cgroup parent based on
the current cgroup manager in use. This parent is only usable
with the cgroup manager the container is created with, so if the
default cgroup manager is later changed or overridden, the
container will not be able to start.
To solve this, store the cgroup manager that created the
container in container configuration, so we can guarantee a
container with a systemd cgroup parent will always be started
with systemd cgroups.
Unfortunately, this is very difficult to test in CI, due to the
fact that we hard-code cgroup manager on all invocations of
Podman in CI.
Fixes #7830
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
Docker supports log-opt max_size and so does conmon (ALthough poorly).
Adding support for this allows users to at least make sure their containers
logs do not become a DOS vector.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes #7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
|
|
This commit handle the TODO task of breaking the Container
config into smaller sub-configs
Signed-off-by: ldelossa <ldelossa@redhat.com>
|
