| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the notion of a "service container" to play kube. A service
container is started before the pods in play kube and is (reverse)
linked to them. The service container is stopped/removed *after*
all pods it is associated with are stopped/removed.
In other words, a service container tracks the entire life cycle
of a service started via `podman play kube`. This is required to
enable `play kube` in a systemd unit file.
The service container is only used when the `--service-container`
flag is set on the CLI. This flag has been marked as hidden as it
is not meant to be used outside the context of `play kube`. It is
further not supported on the remote client.
The wiring with systemd will be done in a later commit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
|
| |\
| |
| | |
Add support for ipc namespace modes "none, private, sharable"
|
| | |
| |
| |
| |
| |
| | |
Fixes: #13265
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
|
| |
It allows to customize the entry that is written to the `/etc/passwd`
file when --passwd is used.
Closes: https://github.com/containers/podman/issues/13185
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
the infra Inherit function was not properly passing pod volume information to new containers
alter the inherit function and struct to use the new `ConfigToSpec` function used in clone
pick and choose the proper entities from a temp spec and validate them on the spegen side rather
than passing directly to a config
resolves #13548
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
|
| |
|
|
| |
Signed-off-by: LStandman <65296484+LStandman@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves #10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Automated for .go files via gomove [1]:
`gomove github.com/containers/podman/v3 github.com/containers/podman/v4`
Remaining files via vgrep [2]:
`vgrep github.com/containers/podman/v3`
[1] https://github.com/KSubedi/gomove
[2] https://github.com/vrothberg/vgrep
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
| |
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves #12173
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves #11805
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Make sure we create new containers in the db with the correct structure.
Also remove some unneeded code for alias handling. We no longer need this
functions.
The specgen format has not been changed for now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |\
| |
| | |
libpod: deduplicate ports in db
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The OCICNI port format has one big problem: It does not support ranges.
So if a users forwards a range of 1k ports with podman run -p 1001-2000
we have to store each of the thousand ports individually as array element.
This bloats the db and makes the JSON encoding and decoding much slower.
In many places we already use a better port struct type which supports
ranges, e.g. `pkg/specgen` or the new network interface.
Because of this we have to do many runtime conversions between the two
port formats. If everything uses the new format we can skip the runtime
conversions.
This commit adds logic to replace all occurrences of the old format
with the new one. The database will automatically migrate the ports
to new format when the container config is read for the first time
after the update.
The `ParsePortMapping` function is `pkg/specgen/generate` has been
reworked to better work with the new format. The new logic is able
to deduplicate the given ports. This is necessary the ensure we
store them efficiently in the DB. The new code should also be more
performant than the old one.
To prove that the code is fast enough I added go benchmarks. Parsing
1 million ports took less than 0.5 seconds on my laptop.
Benchmark normalize PortMappings in specgen:
Please note that the 1 million ports are actually 20x 50k ranges
because we cannot have bigger ranges than 65535 ports.
```
$ go test -bench=. -benchmem ./pkg/specgen/generate/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/pkg/specgen/generate
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op
BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op
BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op
BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op
PASS
ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s
```
Benchmark convert old port format to new one:
```
go test -bench=. -benchmem ./libpod/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/libpod
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op
PASS
ok github.com/containers/podman/v3/libpod 11.727s
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |/
|
|
|
|
|
|
|
| |
Create a new mac address type which supports json marshal/unmarshal from
and to string. This change is backwards compatible with the previous
versions as the unmarshal method still accepts the old byte array or
base64 encoded string.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Fixes: https://github.com/containers/podman/issues/11016
[NO NEW TESTS NEEDED] We have no easy way to tests this in
CI/CD systems. Requires quota to be setup on directories to work.
Fixes: https://github.com/containers/podman/issues/11016
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
We do not use the ocicni code anymore so let's get rid of it. Only the
port struct is used but we can copy this into libpod network types so
we can debloat the binary.
The next step is to remove the OCICNI port mapping form the container
config and use the better PortMapping struct everywhere.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Allows users to specify a readonly rootfs with :O, in exchange podman will create a writable overlay.
bump builah to v1.22.1-0.20210823173221-da2b428c56ce
[NO TESTS NEEDED]
Signed-off-by: flouthoc <flouthoc.git@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Podman inspect has to show exposed ports to match docker. This requires
storing the exposed ports in the container config.
A exposed port is shown as `"80/tcp": null` while a forwarded port is
shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`.
Also make sure to add the exposed ports to the new image when the
container is commited.
Fixes #10777
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
after the init containers pr merged, it was suggested to use `once`
instead of `oneshot` containers as it is more aligned with other
terminiology used similarily.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
|
| |
|
|
|
|
|
| |
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |\
| |
| | |
Add support for environment variable secrets
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| | |
| |
| |
| |
| |
| | |
[NO TESTS NEEDED] This is just running codespell on podman
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
|
| |\ \
| |/
|/| |
Add podman run --timeout option
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |/
|
|
|
|
|
|
| |
- Persist CDIDevices in container config
- Add e2e test
- Log HasDevice error and add additional condition for safety
Signed-off-by: Sebastian Jug <seb@stianj.ug>
|
| |
|
|
| |
Signed-off-by: chenkang <kongchen28@gmail.com>
|
| |
|
|
|
|
|
|
|
| |
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
|
| |
|
|
| |
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Podman pre-1.8 also included a field with this name, which was a
String. Podman 2.2.0 added a new field reusing the name but as a
Struct. This completely broke JSON decode for pre-1.8 containers
in Podman 2.2, resulting in completely broken behavior.
Re-name the JSON field and add a note that the old name should
not be re-used to prevent this problem from re-occurring. This
will still result in containers from 2.2.0 being broken
(specifically, containers with image volumes will have them
disappear) but this is the lesser of two evils.
Fixes #8613
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert the existing network aliases set/remove code to network
connect and disconnect. We can no longer modify aliases for an
existing network, but we can add and remove entire networks. As
part of this, we need to add a new function to retrieve current
aliases the container is connected to (we had a table for this
as of the first aliases PR, but it was not externally exposed).
At the same time, remove all deconflicting logic for aliases.
Docker does absolutely no checks of this nature, and allows two
containers to have the same aliases, aliases that conflict with
container names, etc - it's just left to DNS to return all the
IP addresses, and presumably we round-robin from there? Most
tests for the existing code had to be removed because of this.
Convert all uses of the old container config.Networks field,
which previously included all networks in the container, to use
the new DB table. This ensures we actually get an up-to-date list
of in-use networks. Also, add network aliases to the output of
`podman inspect`.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |\
| |
| | |
Add network aliases for containers to DB
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This adds the database backend for network aliases. Aliases are
additional names for a container that are used with the CNI
dnsname plugin - the container will be accessible by these names
in addition to its name. Aliases are allowed to change over time
as the container connects to and disconnects from networks.
Aliases are implemented as another bucket in the database to
register all aliases, plus two buckets for each container (one to
hold connected CNI networks, a second to hold its aliases). The
aliases are only unique per-network, to the global and
per-container aliases buckets have a sub-bucket for each CNI
network that has aliases, and the aliases are stored within that
sub-bucket. Aliases are formatted as alias (key) to container ID
(value) in both cases.
Three DB functions are defined for aliases: retrieving current
aliases for a given network, setting aliases for a given network,
and removing all aliases for a given network.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we create a container, we assign a cgroup parent based on
the current cgroup manager in use. This parent is only usable
with the cgroup manager the container is created with, so if the
default cgroup manager is later changed or overridden, the
container will not be able to start.
To solve this, store the cgroup manager that created the
container in container configuration, so we can guarantee a
container with a systemd cgroup parent will always be started
with systemd cgroups.
Unfortunately, this is very difficult to test in CI, due to the
fact that we hard-code cgroup manager on all invocations of
Podman in CI.
Fixes #7830
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
|
|
|
|
| |
Docker supports log-opt max_size and so does conmon (ALthough poorly).
Adding support for this allows users to at least make sure their containers
logs do not become a DOS vector.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes #7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
|
| |
|
|
| |
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
|
|
|
This commit handle the TODO task of breaking the Container
config into smaller sub-configs
Signed-off-by: ldelossa <ldelossa@redhat.com>
|
