summaryrefslogtreecommitdiff
path: root/libpod/container_inspect.go
Commit message (Collapse)AuthorAge
* Add podman run --timeout optionDaniel J Walsh2021-04-23
| | | | | | | | | This option allows users to specify the maximum amount of time to run before conmon sends the kill signal to the container. Fixes: https://github.com/containers/podman/issues/6412 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* fix start itchenkang2021-04-17
| | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* add pidfile in inspectionchenkang2021-04-17
| | | | Signed-off-by: chenkang <kongchen28@gmail.com>
* Sort CapDrop in inspect to guarantee orderMatthew Heon2021-02-23
| | | | | | | | | | The order of CapAdd when inspecting containers is deterministic. However, the order of CapDrop is not (for unclear reasons). Add a quick sort on the final array to guarantee a consistent order. Fixes #9490 Signed-off-by: Matthew Heon <mheon@redhat.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Enable whitespace linterPaul Holzinger2021-02-11
| | | | | | | | Use the whitespace linter and fix the reported problems. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Display correct value for unlimited ulimitbaude2021-02-10
| | | | | | | | | | | When doing a container inspect on a container with unlimited ulimits, the value should be -1. But because the OCI spec requires the ulimit value to be uint64, we were displaying the inspect values as a uint64 as well. Simple change to display as an int64. Fixes: #9303 Signed-off-by: baude <bbaude@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* Initial implementation of volume pluginsMatthew Heon2021-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements support for mounting and unmounting volumes backed by volume plugins. Support for actually retrieving plugins requires a pull request to land in containers.conf and then that to be vendored, and as such is not yet ready. Given this, this code is only compile tested. However, the code for everything past retrieving the plugin has been written - there is support for creating, removing, mounting, and unmounting volumes, which should allow full functionality once the c/common PR is merged. A major change is the signature of the MountPoint function for volumes, which now, by necessity, returns an error. Named volumes managed by a plugin do not have a mountpoint we control; instead, it is managed entirely by the plugin. As such, we need to cache the path in the DB, and calls to retrieve it now need to access the DB (and may fail as such). Notably absent is support for SELinux relabelling and chowning these volumes. Given that we don't manage the mountpoint for these volumes, I am extremely reluctant to try and modify it - we could easily break the plugin trying to chown or relabel it. Also, we had no less than *5* separate implementations of inspecting a volume floating around in pkg/infra/abi and pkg/api/handlers/libpod. And none of them used volume.Inspect(), the only correct way of inspecting volumes. Remove them all and consolidate to using the correct way. Compat API is likely still doing things the wrong way, but that is an issue for another day. Fixes #4304 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Exorcise Driver code from libpod/defineMatthew Heon2021-01-12
| | | | | | | | | | | | The libpod/define code should not import any large dependencies, as it is intended to be structures and definitions only. It included the libpod/driver package for information on the storage driver, though, which brought in all of c/storage. Split the driver package so that define has the struct, and thus does not need to import Driver. And simplify the driver code while we're at it. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add LogSize to container inspectDaniel J Walsh2020-12-15
| | | | | | | Other log options are available so we need to add ability to look up LogSize. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Drop default log-level from error to warnDaniel J Walsh2020-12-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our users are missing certain warning messages that would make debugging issues with Podman easier. For example if you do a podman build with a Containerfile that contains the SHELL directive, the Derective is silently ignored. If you run with the log-level warn you get a warning message explainging what happened. $ podman build --no-cache -f /tmp/Containerfile1 /tmp/ STEP 1: FROM ubi8 STEP 2: SHELL ["/bin/bash", "-c"] STEP 3: COMMIT --> 7a207be102a 7a207be102aa8993eceb32802e6ceb9d2603ceed9dee0fee341df63e6300882e $ podman --log-level=warn build --no-cache -f /tmp/Containerfile1 /tmp/ STEP 1: FROM ubi8 STEP 2: SHELL ["/bin/bash", "-c"] STEP 3: COMMIT WARN[0000] SHELL is not supported for OCI image format, [/bin/bash -c] will be ignored. Must use `docker` format --> 7bd96fd25b9 7bd96fd25b9f755d8a045e31187e406cf889dcf3799357ec906e90767613e95f These messages will no longer be lost, when we default to WARNing level. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add better support for unbindable volume mountsDaniel J Walsh2020-11-02
| | | | | | | | Allow users to specify unbindable on volume command line Switch internal mounts to rprivate to help prevent leaks. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* new "image" mount typeValentin Rothberg2020-10-29
| | | | | | | | | | | | | | Add a new "image" mount type to `--mount`. The source of the mount is the name or ID of an image. The destination is the path inside the container. Image mounts further support an optional `rw,readwrite` parameter which if set to "true" will yield the mount writable inside the container. Note that no changes are propagated to the image mount on the host (which in any case is read only). Mounts are overlay mounts. To support read-only overlay mounts, vendor a non-release version of Buildah. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Store cgroup manager on a per-container basisMatthew Heon2020-10-08
| | | | | | | | | | | | | | | | | | | | | When we create a container, we assign a cgroup parent based on the current cgroup manager in use. This parent is only usable with the cgroup manager the container is created with, so if the default cgroup manager is later changed or overridden, the container will not be able to start. To solve this, store the cgroup manager that created the container in container configuration, so we can guarantee a container with a systemd cgroup parent will always be started with systemd cgroups. Unfortunately, this is very difficult to test in CI, due to the fact that we hard-code cgroup manager on all invocations of Podman in CI. Fixes #7830 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* podman: add option --cgroup-confGiuseppe Scrivano2020-08-21
| | | | | | | | | | | | | | | it allows to manually tweak the configuration for cgroup v2. we will expose some of the options in future as single options (e.g. the new memory knobs), but for now add the more generic --cgroup-conf mechanism for maximum control on the cgroup configuration. OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040 Requires: https://github.com/containers/crun/pull/459 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --umask flag for create, runAshley Cui2020-07-21
| | | | | | | | --umask sets the umask inside the container Defaults to 0022 Co-authored-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Ashley Cui <acui@redhat.com>
* Merge pull request #6956 from mheon/add_ports_to_pod_inspectOpenShift Merge Robot2020-07-15
|\ | | | | Include infra container information in `pod inspect`
| * Include infra container information in `pod inspect`Matthew Heon2020-07-14
| | | | | | | | | | | | | | | | | | | | We had a field for this in the inspect data, but it was never being populated. Because of this, `podman pod inspect` stopped showing port bindings (and other infra container settings). Add code to populate the infra container inspect data, and add a test to ensure we don't regress again. Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Add SystemdMode to inspect for containersMatthew Heon2020-07-14
|/ | | | | | | | | This allows us to determine if the container auto-detected that systemd was in use, and correctly activated systemd integration. Use this to wire up some integration tests to verify that systemd integration is working properly. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Merge pull request #6836 from ashley-cui/tzlibpodOpenShift Merge Robot2020-07-06
|\ | | | | Add --tz flag to create, run
| * Add --tz flag to create, runAshley Cui2020-07-02
| | | | | | | | | | | | | | --tz flag sets timezone inside container Can be set to IANA timezone as well as `local` to match host machine Signed-off-by: Ashley Cui <acui@redhat.com>
* | move go module to v2Valentin Rothberg2020-07-06
|/ | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Turn on More lintersDaniel J Walsh2020-06-15
| | | | | | | | | - misspell - prealloc - unparam - nakedret Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Ensure `podman inspect` output for NetworkMode is rightMatthew Heon2020-05-08
| | | | | | | | | | | I realized that setting NetworkMode to private when we are making a network namespace but not configuring it with CNI or Slirp is wrong; that's considered `--net=none` not `--net=private`. At the same time, realized that we actually store whether Slirp is in use, so we can be more specific than just "default" and instead say slirp4netns or bridge. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Fix bug where pods would unintentionally share cgroupnsMatthew Heon2020-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This one was a massive pain to track down. The original symptom was an error message from rootless Podman trying to make a container in a pod. I unfortunately did not look at the error message closely enough to realize that the namespace in question was the cgroup namespace (the reproducer pod was explicitly set to only share the network namespace), else this would have been quite a bit shorter. I spent considerable effort trying to track down differences between the inspect output of the two containers, and when that failed I was forced to resort to diffing the OCI specs. That finally proved fruitful, and I was able to determine what should have been obvious all along: the container was joining the cgroup namespace of the infra container when it really ought not to have. From there, I discovered a variable collision in pod config. The UsePodCgroup variable means "create a parent cgroup for the pod and join containers in the pod to it". Unfortunately, it is very similar to UsePodUTS, UsePodNet, etc, which mean "the pod shares this namespace", so an accessor was accidentally added for it that indicated the pod shared the cgroup namespace when it really did not. Once I realized that, it was a quick fix - add a bool to the pod's configuration to indicate whether the cgroup ns was shared (distinct from UsePodCgroup) and use that for the accessor. Also included are fixes for `podman inspect` and `podman pod inspect` that fix them to actually display the state of the cgroup namespace (for container inspect) and what namespaces are shared (for pod inspect). Either of those would have made tracking this down considerably quicker. Fixes #6149 Signed-off-by: Matthew Heon <mheon@redhat.com>
* add {generate,play} kubeValentin Rothberg2020-05-06
| | | | | | | | | | | | | | | | | | | Add the `podman generate kube` and `podman play kube` command. The code has largely been copied from Podman v1 but restructured to not leak the K8s core API into the (remote) client. Both commands are added in the same commit to allow for enabling the tests at the same time. Move some exports from `cmd/podman/common` to the appropriate places in the backend to avoid circular dependencies. Move definitions of label annotations to `libpod/define` and set the security-opt labels in the frontend to make kube tests pass. Implement rest endpoints, bindings and the tunnel interface. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Fix errors found in coverity scanDaniel J Walsh2020-05-01
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Revert "Default CPUShares in Inspect are 1024"Sagi Shnaidman2020-03-30
| | | | | | | | | cpu-share is 0 in docker inspect, see https://github.com/moby/moby/issues/35452 This reverts commit eb229d526c04f17ca8b7e65abba745fd5b465a6c. Signed-off-by: Sagi Shnaidman <sshnaidm@redhat.com>
* Add support for containers.confDaniel J Walsh2020-03-27
| | | | | | | vendor in c/common config pkg for containers.conf Signed-off-by: Qi Wang qiwan@redhat.com Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podmanv2 container inspectBrent Baude2020-03-26
| | | | | | add ability to inspect a container Signed-off-by: Brent Baude <bbaude@redhat.com>
* Fix spelling mistakes in code found by codespellDaniel J Walsh2020-03-07
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for multiple CNI networks in podman inspectMatthew Heon2020-02-25
| | | | | | | | | | | | | | | | When inspecting containers, info on CNI networks added to the container by name (e.g. --net=name1) should be displayed separately from the configuration of the default network, in a separate map called Networks. This patch adds this separation, improving our Docker compatibility and also adding the ability to see if a container has more than one IPv4 and IPv6 address and more than one MAC address. Fixes #4907 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Default CPUShares in Inspect are 1024Matthew Heon2020-01-23
| | | | | | | | | | This is purely a display change - we weren't initializing the default value to display for the CPUShares field, which defaults to 1024. Fixes #4822 Signed-off-by: Matthew Heon <mheon@redhat.com>
* make lint: enable gocriticValentin Rothberg2020-01-13
| | | | | | | `gocritic` is a powerful linter that helps in preventing certain kinds of errors as well as enforcing a coding style. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* log: support --log-opt tag=Giuseppe Scrivano2020-01-10
| | | | | | | | | | support a custom tag to add to each log for the container. It is currently supported only by the journald backend. Closes: https://github.com/containers/libpod/issues/3653 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Ensure SizeRw is shown when a user does 'inspect --size -t container'.Neville Cain2019-12-27
| | | | | | | | | | | | | | Currently, if a user requests the size on a container (inspect --size -t container), the SizeRw does not show up if the value is 0. It's because InspectContainerData is defined as int64 and there is an omit when empty. We do want to display it even if the value is empty. I have changed the type of SizeRw to be a pointer to an int64 instead of an int64. It will allow us todistinguish the empty value to the missing value. I updated the test "podman inspect container with size" to ensure we check thatSizeRw is displayed correctly. Closes #4744 Signed-off-by: NevilleC <neville.cain@qonto.eu>
* container config: add CreateCommandValentin Rothberg2019-12-13
| | | | | | | | | | | | | | | | | | Store the full command plus arguments of the process the container has been created with. Expose this data as a `Config.CreateCommand` field in the container-inspect data as well. This information can be useful for debugging, as we can find out which command has created the container, and, if being created via the Podman CLI, we know exactly with which flags the container has been created with. The immediate motivation for this change is to use this information for `podman-generate-systemd` to generate systemd-service files that allow for creating new containers (in contrast to only starting existing ones). Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* add libpod/configValentin Rothberg2019-10-31
| | | | | | | | | | | | Refactor the `RuntimeConfig` along with related code from libpod into libpod/config. Note that this is a first step of consolidating code into more coherent packages to make the code more maintainable and less prone to regressions on the long runs. Some libpod definitions were moved to `libpod/define` to resolve circular dependencies. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* bump containers/image to v5.0.0, buildah to v1.11.4Nalin Dahyabhai2019-10-29
| | | | | | | | | Move to containers/image v5 and containers/buildah to v1.11.4. Replace an equality check with a type assertion when checking for a docker.ErrUnauthorizedForCredentials in `podman login`. Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
* inspect: rename ImageID go field to ImageValentin Rothberg2019-10-15
| | | | | | | | | | | | | | The json field is called `Image` while the go field is called `ImageID`, tricking users into filtering for `Image` which ultimately results in an error. Hence, rename the field to `Image` to align json and go. To prevent podman users from regressing, rename `Image` to `ImageID` in the specified filters. Add tests to prevent us from regressing. Note that consumers of the go API that are using `ImageID` are regressing; ultimately we consider it to be a bug fix. Fixes: #4193 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Update c/image to v4.0.1 and buildah to 1.11.3Miloslav Trmač2019-10-04
| | | | | | | | | | | | | | This requires updating all import paths throughout, and a matching buildah update to interoperate. I can't figure out the reason for go.mod tracking github.com/containers/image v3.0.2+incompatible // indirect ((go mod graph) lists it as a direct dependency of libpod, but (go list -json -m all) lists it as an indirect dependency), but at least looking at the vendor subdirectory, it doesn't seem to be actually used in the built binaries. Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* Add support for launching containers without CGroupsMatthew Heon2019-09-10
| | | | | | | This is mostly used with Systemd, which really wants to manage CGroups itself when managing containers via unit file. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Print Pod ID in `podman inspect` outputMatthew Heon2019-08-01
| | | | | | | Somehow this managed to slip through the cracks, but this is definitely something inspect should print. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* golangci-lint phase 4baude2019-07-22
| | | | | | | | | | | clean up some final linter issues and add a make target for golangci-lint. in addition, begin running the tests are part of the gating tasks in cirrus ci. we cannot fully shift over to the new linter until we fix the image on the openshift side. for short term, we will use both Signed-off-by: baude <bbaude@redhat.com>
* Populate inspect with security-opt settingsMatthew Heon2019-07-17
| | | | | | | | We can infer no-new-privileges. For now, manually populate seccomp (can't infer what file we sourced from) and SELinux/Apparmor (hard to tell if they're enabled or not). Signed-off-by: Matthew Heon <mheon@redhat.com>
* Move the HostConfig portion of Inspect inside libpodMatthew Heon2019-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we first began writing Podman, we ran into a major issue when implementing Inspect. Libpod deliberately does not tie its internal data structures to Docker, and stores most information about containers encoded within the OCI spec. However, Podman must present a CLI compatible with Docker, which means it must expose all the information in 'docker inspect' - most of which is not contained in the OCI spec or libpod's Config struct. Our solution at the time was the create artifact. We JSON'd the complete CreateConfig (a parsed form of the CLI arguments to 'podman run') and stored it with the container, restoring it when we needed to run commands that required the extra info. Over the past month, I've been looking more at Inspect, and refactored large portions of it into Libpod - generating them from what we know about the OCI config and libpod's (now much expanded, versus previously) container configuration. This path comes close to completing the process, moving the last part of inspect into libpod and removing the need for the create artifact. This improves libpod's compatability with non-Podman containers. We no longer require an arbitrarily-formatted JSON blob to be present to run inspect. Fixes: #3500 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* golangci-lint pass number 2baude2019-07-11
| | | | | | clean up and prepare to migrate to the golangci-linter Signed-off-by: baude <bbaude@redhat.com>
* code cleanupbaude2019-07-08
| | | | | | clean up code identified as problematic by golands inspection Signed-off-by: baude <bbaude@redhat.com>