summaryrefslogtreecommitdiff
path: root/libpod/container_internal.go
Commit message (Collapse)AuthorAge
* Ensure resolv.conf has the right label and pathMatthew Heon2018-10-04
| | | | | | | | Adds a few missing things from writeStringToRundir() to the new resolv.conf function, specifically relabelling and returning a path compatible with rootless podman Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Drop libnetwork vendor and move the code into pkg/Matthew Heon2018-10-04
| | | | | | | | | | | The vendoring issues with libnetwork were significant (it was dragging in massive amounts of code) and were just not worth spending the time to work through. Highly unlikely we'll ever end up needing to update this code, so move it directly into pkg/ so we don't need to vendor libnetwork. Make a few small changes to remove the need for the remainder of libnetwork. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Switch to using libnetwork's resolvconf packageMatthew Heon2018-10-04
| | | | | | | | | Libnetwork provides a well-tested package for generating resolv.conf from the host's that has some features our current implementation does not. Swap to using their code and remove our built-in implementation. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Add support to checkpoint/restore containersAdrian Reber2018-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | runc uses CRIU to support checkpoint and restore of containers. This brings an initial checkpoint/restore implementation to podman. None of the additional runc flags are yet supported and container migration optimization (pre-copy/post-copy) is also left for the future. The current status is that it is possible to checkpoint and restore a container. I am testing on RHEL-7.x and as the combination of RHEL-7 and CRIU has seccomp troubles I have to create the container without seccomp. With the following steps I am able to checkpoint and restore a container: # podman run --security-opt="seccomp=unconfined" -d registry.fedoraproject.org/f27/httpd # curl -I 10.22.0.78:8080 HTTP/1.1 403 Forbidden # <-- this is actually a good answer # podman container checkpoint <container> # curl -I 10.22.0.78:8080 curl: (7) Failed connect to 10.22.0.78:8080; No route to host # podman container restore <container> # curl -I 10.22.0.78:8080 HTTP/1.1 403 Forbidden I am using CRIU, runc and conmon from git. All required changes for checkpoint/restore support in podman have been merged in the corresponding projects. To have the same IP address in the restored container as before checkpointing, CNI is told which IP address to use. If the saved network configuration cannot be found during restore, the container is restored with a new IP address. For CRIU to restore established TCP connections the IP address of the network namespace used for restore needs to be the same. For TCP connections in the listening state the IP address can change. During restore only one network interface with one IP address is handled correctly. Support to restore containers with more advanced network configuration will be implemented later. v2: * comment typo * print debug messages during cleanup of restore files * use createContainer() instead of createOCIContainer() * introduce helper CheckpointPath() * do not try to restore a container that is paused * use existing helper functions for cleanup * restructure code flow for better readability * do not try to restore if checkpoint/inventory.img is missing * git add checkpoint.go restore.go v3: * move checkpoint/restore under 'podman container' v4: * incorporated changes from latest reviews Signed-off-by: Adrian Reber <areber@redhat.com>
* Merge pull request #1578 from baude/addubuntuciOpenShift Merge Robot2018-10-03
|\ | | | | Add Ubuntu-18.04 to CI testing
| * Add ability for ubuntu to be testedbaude2018-10-03
| | | | | | | | | | | | | | | | unfortunately the papr CI system cannot test ubuntu as a VM; therefore, this PR still keeps travis. but it does include fixes that will be required for running on modern versions of ubuntu. Signed-off-by: baude <bbaude@redhat.com>
* | selinux: drop superflous relabelGiuseppe Scrivano2018-10-03
|/ | | | | | | | | | The same relabel is already done in writeStringToRundir so we don't need to do it twice. The version in writeStringToRundir takes into account the correct file path when using user namespaces. Closes: https://github.com/containers/libpod/pull/1584 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #1531 from mheon/add_exited_stateOpenShift Merge Robot2018-10-03
|\ | | | | Add ContainerStateExited and OCI delete() in cleanup()
| * Fix Wait() to allow Exited state as well as StoppedMatthew Heon2018-10-02
| | | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
| * Fix cleanupRuntime to only save if container is validMatthew Heon2018-10-02
| | | | | | | | | | | | | | | | | | | | | | We call cleanup() (which calls cleanupRuntime()) as part of removing containers, after the container has already been removed from the database. cleanupRuntime() tries to update and save the state, which obviously fails if the container no longer exists. Make the save() conditional on the container not being in the process of being removed. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
| * Add ContainerStateExited and OCI delete() in cleanup()Matthew Heon2018-10-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To work better with Kata containers, we need to delete() from the OCI runtime as a part of cleanup, to ensure resources aren't retained longer than they need to be. To enable this, we need to add a new state to containers, ContainerStateExited. Containers transition from ContainerStateStopped to ContainerStateExited via cleanupRuntime which is invoked as part of cleanup(). A container in the Exited state is identical to Stopped, except it has been removed from the OCI runtime and thus will be handled differently when initializing the container. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* | Merge pull request #1562 from mheon/update_install_instructionsOpenShift Merge Robot2018-10-02
|\ \ | |/ |/| Update docs to build a runc that works with systemd
| * Update docs to build a runc that works with systemdMatthew Heon2018-10-01
| | | | | | | | | | | | | | | | | | | | | | Runc disables systemd cgroup support when build statically, so don't tell people to do that now that we're defaulting to systemd for cgroup management. Also, fix some error messages to use the proper ID() call for containers. Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* | Need to allocate memory for hook structDaniel J Walsh2018-10-02
|/ | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --mount option for `create` & `run` commandDaniel J Walsh2018-09-21
| | | | | | | | Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1524 Approved by: mheon
* Hooks supports two directories, process default and overrideDaniel J Walsh2018-09-17
| | | | | | | | | | | | | ALso cleanup files section or podman man page Add description of policy.json Sort alphabetically. Add more info on oci hooks Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1487 Approved by: umohnani8
* container: resolve rootfs symlinksGiuseppe Scrivano2018-08-31
| | | | | | | | | | | | Prevent a runc error that doesn't like symlinks as part of the rootfs. Closes: https://github.com/containers/libpod/issues/1389 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #1390 Approved by: rhatdan
* Resolve /etc/resolv.conf before readingbaude2018-08-28
| | | | | | | | | | | | | | | | | In some cases, /etc/resolv.conf can be a symlink to something like /run/systemd/resolve/resolv.conf. We currently check for that file and if it exists, use it instead of /etc/resolv.conf. However, we are no seeing cases where the systemd resolv.conf exists but /etc/resolv.conf is NOT a symlink. Therefore, we now obtain the endpoint for /etc/resolv.conf whether it is a symlink or not. That endpoint is now what is read to generate a container's resolv.conf. Signed-off-by: baude <bbaude@redhat.com> Closes: #1368 Approved by: rhatdan
* Added option to share kernel namespaces in libpod and podmanhaircommander2018-08-23
| | | | | | | | | A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1187 Approved by: mheon
* switch projectatomic to containersDaniel J Walsh2018-08-16
| | | | | | | | | | Need to get some small changes into libpod to pull back into buildah to complete buildah transition. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1270 Approved by: mheon
* We need to sort mounts so that one mount does not over mount another.Daniel J Walsh2018-08-10
| | | | | | | | | | | | | | | | | Currently we add mounts from images, volumes and internal. We can accidently over mount an existing mount. This patch sorts the mounts to make sure a parent directory is always mounted before its content. Had to change the default propagation on image volume mounts from shared to private to stop mount points from leaking out of the container. Also switched from using some docker/docker/pkg to container/storage/pkg to remove some dependencies on Docker. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1243 Approved by: mheon
* Add --force to podman umount to force the unmounting of the rootfsDaniel J Walsh2018-08-01
| | | | | | | | | | | | podman umount will currently only unmount file system if not other process is using it, otherwise the umount decrements the container storage to indicate that the caller is no longer using the mount point, once the count gets to 0, the file system is actually unmounted. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1184 Approved by: TomSweeneyRedHat
* Ensure container and pod refresh picks up a StateMatthew Heon2018-07-31
| | | | | | | | | | | | refresh() is the only major command we had that did not perform a sync before running, and thus was not guaranteed to pick up a good copy of the state. Fix this by updating the state before a refresh(). Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1186 Approved by: rhatdan
* network: add support for rootless network with slirp4netnsGiuseppe Scrivano2018-07-31
| | | | | | | | | | | slirp4netns is required to setup the network namespace: https://github.com/rootless-containers/slirp4netns Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #1156 Approved by: rhatdan
* Added pod.Restart() functionality to libpod.haircommander2018-07-25
| | | | | | | | | | | Moved contents of RestartWithTimeout to restartWithTimeout in container_internal to be able to call restart without locking in function. Refactored startNode to be able to either start or restart a node. Built pod Restart() with new startNode with refresh true. Signed-off-by: haircommander <pehunt@redhat.com> Closes: #1152 Approved by: rhatdan
* Let containers/storage keep track of mountsDaniel J Walsh2018-07-19
| | | | | | | | | | | Currently we unmount storage that is still in use. We should not be unmounting storeage that we mounted via a different command or by podman mount. This change relies on containers/storage to umount keep track of how many times the storage was mounted before really unmounting it from the system. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Vendor in latest code for storage,image, buildahDaniel J Walsh2018-07-19
| | | | | | | | | | | vendor in containers/storage vendor in containers/image vendor in projectatomic/buildah Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #1114 Approved by: mheon
* Record whether the container has exitedMatthew Heon2018-07-13
| | | | | | | | Use this to supplement exit codes returned from containers, to make sure we know when exit codes are invalid (as the container has not yet exited) Signed-off-by: Matthew Heon <mheon@redhat.com>
* Support multiple networksbaude2018-07-12
| | | | | | | | | | | | | This is a refresh of Dan William's PR #974 with a rebase and proper vendoring of ocicni and containernetworking/cni. It adds the ability to define multiple networks as so: podman run --network=net1,net2,foobar ... Signed-off-by: baude <bbaude@redhat.com> Closes: #1082 Approved by: baude
* Add --volumes-from flag to podman run and createumohnani82018-07-09
| | | | | | | | | | podman now supports --volumes-from flag, which allows users to add all the volumes an existing container has to a new one. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #931 Approved by: mheon
* Remove per-container CGroup parentsMatthew Heon2018-07-06
| | | | | | | | | | | | | | | | | | | Originally, it seemed like a good idea to place Conmon and the container it managed under a shared CGroup, so we could manage the two together. It's become increasingly clear that this is a potential performance sore point, gains us little practical benefit in managing Conmon, and adds extra steps to container cleanup that interfere with Conmon postrun hooks. Revert back to a shared CGroup for conmon processes under the CGroup parent. This will retain per-pod conmon CGroups as well if the pod is set to create a CGroup and act as CGroup parent for its containers. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #1051 Approved by: umohnani8
* more changes to compile darwinbaude2018-07-05
| | | | | | | | | | | | | | | | this should represent the last major changes to get darwin to **compile**. again, the purpose here is to get darwin to compile so that we can eventually implement a ci task that would protect against regressions for darwin compilation. i have left the manual darwin compilation largely static still and in fact now only interject (manually) two build tags to assist with the build. trevor king has great ideas on how to make this better and i will defer final implementation of those to him. Signed-off-by: baude <bbaude@redhat.com> Closes: #1047 Approved by: rhatdan
* changes to allow for darwin compilationbaude2018-06-29
| | | | | | | Signed-off-by: baude <bbaude@redhat.com> Closes: #1015 Approved by: baude
* Fix built-in volume issue with podman run/createumohnani82018-06-29
| | | | | | | | | | | | | The destination path of the built-in volume was not being created but a relabel was being attempted on it, this was causing issues with all images that have built-in volumes. This patch fixes that and ensures the destination volume path is created. Signed-off-by: umohnani8 <umohnani@redhat.com> Closes: #1026 Approved by: mheon
* Add `podman container cleanup` to CLIDaniel J Walsh2018-06-29
| | | | | | | | | | | | | When we run containers in detach mode, nothing cleans up the network stack or the mount points. This patch will tell conmon to execute the cleanup code when the container exits. It can also be called to attempt to cleanup previously running containers. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Closes: #942 Approved by: mheon
* *: Replace Generator.Spec() with Generator.ConfigW. Trevor King2018-06-27
| | | | | | | | | | | | Catching up with opencontainers/runtime-tools@84a62c6a (generate: Move Generator.spec to Generator.Config, 2016-11-06, #266, v0.6.0), now that we've bumped runtime-tools in f6c0fc1a (Vendor in latest runtime-tools, 2018-06-26, #1007). Signed-off-by: W. Trevor King <wking@tremily.us> Closes: #1008 Approved by: mheon
* rootless: do not configure additional groupsGiuseppe Scrivano2018-06-27
| | | | | | | | | Additional groups are not allowed in an userNS. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #936 Approved by: rhatdan
* rootless: add management for the userNSGiuseppe Scrivano2018-06-27
| | | | | | | | | | When running podman as non root user always create an userNS and let the OCI runtime use it. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #936 Approved by: rhatdan
* container_internal: don't ignore error from cleanupNetwork()Giuseppe Scrivano2018-06-27
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #1002 Approved by: rhatdan
* Make CGroups cleanup optional on whether they existMatthew Heon2018-06-22
| | | | | | | Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #981 Approved by: baude
* Add Refresh() to ctrs to refresh state after db changeMatthew Heon2018-06-22
| | | | | | | | | | The Refresh() function is used to reset a container's state after a database format change to state is made that requires migration Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #981 Approved by: baude
* Fix image volumes access and mount problems on restartMarco Vedovati2018-06-22
| | | | | | | | | | | | | | | | | | | Signed-off-by: Marco Vedovati <mvedovati@suse.com> - Set srcPath permissions so that the container user can R/W it. - Fix uninitialized spec.Mount when restarting a container. - Check for srcPath instead of volumePath existence when setting up a volume mount point for a container. - Set the overlay volumePath with the same owner and permissions as srcPath to allow proper access by the container user. Closes #844 Closes: #951 Approved by: rhatdan
* Add extra debug so we can tell apart postdelete hooksMatthew Heon2018-06-19
| | | | | | | | | | Ensure we can identify what hook is running so we can tell which are erroring. Signed-off-by: Matthew Heon <matthew.heon@gmail.com> Closes: #960 Approved by: rhatdan
* Add MacAddress to inspectWim2018-06-18
| | | | | | | Signed-off-by: Wim <wim@42.be> Closes: #955 Approved by: rhatdan
* podman: use a different store for the rootless caseGiuseppe Scrivano2018-06-15
| | | | | | | | | so that the user has rw access to it. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* container: do not set any mapping when using a rootfsGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* podman: do not use Chown in rootless modeGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* network: do not attempt to create a network in rootless modeGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* oci: do not use hooks in rootless modeGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
* container: do not add shm in rootless modeGiuseppe Scrivano2018-06-15
| | | | | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Closes: #871 Approved by: mheon
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-18 18:03:24 +0000