summaryrefslogtreecommitdiff
path: root/libpod/container_internal_linux.go
Commit message (Collapse)AuthorAge
* Only add 127.0.0.1 entry to /etc/hosts with --net=nonePaul Holzinger2021-09-22
| | | | | | | | | | | The check for net=none was wrong. It just assumed when we do not create the netns but have one set that we use the none mode. This however also applies to a container which joins the pod netns. To correctly check for the none mode use `config.NetMode.IsNone()`. Fixes #11596 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* libpod: honor --cgroups=split also with podsGiuseppe Scrivano2021-09-16
| | | | | | Honor --cgroups=split also when the container is running in a pod. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* test: enable --cgroup-parent testGiuseppe Scrivano2021-09-16
| | | | | | | | and fix it for running with runc. Closes: https://github.com/containers/podman/issues/11165 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add Checkpointed bool to InspectMatthew Heon2021-09-07
| | | | | | | | When inspecting a container, we now report whether the container was stopped by a `podman checkpoint` operation via a new bool in the State portion of inspected, `Checkpointed`. Signed-off-by: Matthew Heon <mheon@redhat.com>
* feat: add localhost into hosts if the networking mode is not hostParham Alvani2021-09-04
| | | | Signed-off-by: Parham Alvani <1995parham@tuta.io>
* pass LISTEN_* environment into containerValentin Rothberg2021-08-31
| | | | | | | | | | | | | | | Make sure that Podman passes the LISTEN_* environment into containers. Similar to runc, LISTEN_PID is set to 1. Also remove conditionally passing the LISTEN_FDS as extra files. The condition was wrong (inverted) and introduced to fix #3572 which related to running under varlink which has been dropped entirely with Podman 3.0. Note that the NOTIFY_SOCKET and LISTEN_* variables are cleared when running `system service`. Fixes: #10443 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* container: resolve workdir after all the mounts happen.flouthoc2021-08-30
| | | | | | | | There are use-cases where users would want to use overlay-mounts as workdir. For such cases workdir should be resolved after all the mounts are completed during the container init process. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* Implement SD-NOTIFY proxy in conmonDaniel J Walsh2021-08-20
| | | | | | | | | | | | | | | | This leverages conmon's ability to proxy the SD-NOTIFY socket. This prevents locking caused by OCI runtime blocking, waiting for SD-NOTIFY messages, and instead passes the messages directly up to the host. NOTE: Also re-enable the auto-update tests which has been disabled due to flakiness. With this change, Podman properly integrates into systemd. Fixes: #7316 Signed-off-by: Joseph Gooch <mrwizard@dok.org> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Run codespell to fix spellingDaniel J Walsh2021-08-11
| | | | | | [NO TESTS NEEDED] Just fixing spelling. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Do not add an entry to /etc/hosts with `--net=host`Matthew Heon2021-08-04
| | | | | | | | | | | | | | | To match Docker's behavior, in the `--net=host` case, we need to use the host's `/etc/hosts` file, unmodified (without adding an entry for the container). We will still respect hosts from `--add-host` but will not make any automatic changes. Fortuntely, this is strictly a matter of removal and refactoring as we already base our `/etc/hosts` on the host's version - just need to remove the code that added entries when net=host was set. Fixes #10319 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Support checkpoint/restore with podsAdrian Reber2021-07-27
| | | | | | | | | | | | | | | | | | | This adds support to checkpoint containers out of pods and restore container into pods. It is only possible to restore a container into a pod if it has been checkpointed out of pod. It is also not possible to restore a non pod container into a pod. The main reason this does not work is the PID namespace. If a non pod container is being restored in a pod with a shared PID namespace, at least one process in the restored container uses PID 1 which is already in use by the infrastructure container. If someone tries to restore container from a pod with a shared PID namespace without a shared PID namespace it will also fail because the resulting PID namespace will not have a PID 1. Signed-off-by: Adrian Reber <areber@redhat.com>
* Prepare CRIU version check to work with multiple versionsAdrian Reber2021-07-27
| | | | | | | | The upcoming commit to support checkpointing out of Pods requires CRIU 3.16. This changes the CRIU version check to support checking for different versions. Signed-off-by: Adrian Reber <areber@redhat.com>
* fix: uid/gid for volume mounted to existing dirMatej Vasek2021-07-12
| | | | | | | If mounting to existing directory the uid/gid should be preserved. Primary uid/gid of container shouldn't be used. Signed-off-by: Matej Vasek <mvasek@redhat.com>
* podman diff accept two images or containersPaul Holzinger2021-07-02
| | | | | | | | | | | | | | | | | | | First, make podman diff accept optionally a second argument. This allows the user to specify a second image/container to compare the first with. If it is not set the parent layer will be used as before. Second, podman container diff should only use containers and podman image diff should only use images. Previously, podman container diff would use the image when both an image and container with this name exists. To make this work two new parameters have been added to the api. If they are not used the previous behaviour is used. The same applies to the bindings. Fixes #10649 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Fix systemd-resolved detection.Max Goltzsche2021-06-20
| | | | | | | | | | | | | | | Previously podman failed when run in an environment where 127.0.0.53 is the only nameserver but systemd-resolved is not used directly. In practice this happened when podman was run within an alpine container that used the host's network and the host was running systemd-resolved. This fix makes podman ignore a file not found error when reading /run/systemd/resolve/resolv.conf. Closes #10733 [NO TESTS NEEDED] Signed-off-by: Max Goltzsche <max.goltzsche@gmail.com>
* Merge pull request #10684 from Luap99/slirp-hostsOpenShift Merge Robot2021-06-16
|\ | | | | add correct slirp ip to /etc/hosts
| * add correct slirp ip to /etc/hostsPaul Holzinger2021-06-15
| | | | | | | | | | | | | | | | | | The container name should have the slirp interface ip set in /etc/hosts and not the gateway ip. Commit c8dfcce6db0a introduced this regression. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1972073 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Fix permissions on initially created named volumesDaniel J Walsh2021-06-14
|/ | | | | | | | Permission of volume should match the directory it is being mounted on. Fixes: https://github.com/containers/podman/issues/10188 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix pre-checkpointingAdrian Reber2021-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunately --pre-checkpointing never worked as intended and recent changes to runc have shown that it is broken. To create a pre-checkpoint CRIU expects the paths between the pre-checkpoints to be a relative path. If having a previous checkpoint it needs the be referenced like this: --prev-images-dir ../parent Unfortunately Podman was giving runc (and CRIU) an absolute path. Unfortunately, again, until March 2021 CRIU silently ignored if the path was not relative and switch back to normal checkpointing. This has been now fixed in CRIU and runc and running pre-checkpoint with the latest runc fails, because runc already sees that the path is absolute and returns an error. This commit fixes this by giving runc a relative path. This commit also fixes a second pre-checkpointing error which was just recently introduced. So summarizing: pre-checkpointing never worked correctly because CRIU ignored wrong parameters and recent changes broke it even more. Now both errors should be fixed. [NO TESTS NEEDED] Signed-off-by: Adrian Reber <areber@redhat.com> Signed-off-by: Adrian Reber <adrian@lisas.de>
* Improve systemd-resolved detectionPaul Holzinger2021-06-08
| | | | | | | | | | | | | When 127.0.0.53 is the only nameserver in /etc/resolv.conf assume systemd-resolved is used. This is better because /etc/resolv.conf does not have to be symlinked to /run/systemd/resolve/stub-resolv.conf in order to use systemd-resolved. [NO TESTS NEEDED] Fixes: #10570 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add parameter to specify checkpoint archive compressionAdrian Reber2021-06-07
| | | | | | | | | | | | | | | The checkpoint archive compression was hardcoded to `archive.Gzip`. There have been requests to make the used compression algorithm selectable. There was especially the request to not compress the checkpoint archive to be able to create faster checkpoints when not compressing it. This also changes the default from `gzip` to `zstd`. This change should not break anything as the restore code path automatically handles whatever compression the user provides during restore. Signed-off-by: Adrian Reber <areber@redhat.com>
* add ipv6 nameservers only when the container has ipv6 enabledPaul Holzinger2021-06-03
| | | | | | | | | | | | | | | The containers /etc/resolv.conf allways preserved the ipv6 nameserves from the host even when the container did not supported ipv6. Check if the cni result contains an ipv6 address or slirp4netns has ipv6 support enabled and only add the ipv6 nameservers when this is the case. The test needs to have an ipv6 nameserver in the hosts /etc/hosts but we should never mess with this file on the host. Therefore the test is skipped when no ipv6 is detected. Fixes #10158 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #10334 from mheon/add_relabel_vol_pluginOpenShift Merge Robot2021-05-17
|\ | | | | Ensure that :Z/:z/:U can be used with named volumes
| * Ensure that :Z/:z/:U can be used with named volumesMatthew Heon2021-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Docker allows relabeling of any volume passed in via -v, even including named volumes. This normally isn't an issue at all, given named volumes get the right label for container access automatically, but this becomes an issue when volume plugins are involved - these aren't managed by Podman, and may well be unaware of SELinux labelling. We could automatically relabel these volumes on creation, but I'm still reluctant to do that (feels like it could break things). Instead, let's allow :z and :Z to be used with named volumes, so users can explicitly request relabel of a volume plugin-backed volume. We also get :U at the same time. I don't see any real need for it but it also doesn't seem to hurt, so I didn't bother disabling it. Fixes #10273 Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Merge pull request #10366 from ashley-cui/secretoptionsOpenShift Merge Robot2021-05-17
|\ \ | | | | | | Support uid,gid,mode options for secrets
| * | Support uid,gid,mode options for secretsAshley Cui2021-05-17
| |/ | | | | | | | | | | | | Support UID, GID, Mode options for mount type secrets. Also, change default secret permissions to 444 so all users can read secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* / Add host.containers.internal entry into container's etc/hostsBaron Lenardson2021-05-17
|/ | | | | | | | | | | This change adds the entry `host.containers.internal` to the `/etc/hosts` file within a new containers filesystem. The ip address is determined by the containers networking configuration and points to the gateway address for the containers networking namespace. Closes #5651 Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
* Merge pull request #10221 from ashley-cui/envsecOpenShift Merge Robot2021-05-07
|\ | | | | Add support for environment variable secrets
| * Add support for environment variable secretsAshley Cui2021-05-06
| | | | | | | | | | | | | | | | Env var secrets are env vars that are set inside the container but not commited to and image. Also support reading from env var when creating a secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | Revert Patch to relabel if selinux not enabledDaniel J Walsh2021-05-06
| | | | | | | | | | | | | | | | | | | | Revert : https://github.com/containers/podman/pull/9895 Turns out that if Docker is in --selinux-enabeled, it still relabels if the user tells the system to, even if running a --privileged container or if the selinux separation is disabled --security-opt label=disable. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | cgroup: fix rootless --cgroup-parent with podsGiuseppe Scrivano2021-05-06
| | | | | | | | | | | | | | | | | | | | extend to pods the existing check whether the cgroup is usable when running as rootless with cgroupfs. commit 17ce567c6827abdcd517699bc07e82ccf48f7619 introduced the regression. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | migrate Podman to containers/common/libimageValentin Rothberg2021-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Podman code base over to `common/libimage` which replaces `libpod/image` and a lot of glue code entirely. Note that I tried to leave bread crumbs for changed tests. Miscellaneous changes: * Some errors yield different messages which required to alter some tests. * I fixed some pre-existing issues in the code. Others were marked as `//TODO`s to prevent the PR from exploding. * The `NamesHistory` of an image is returned as is from the storage. Previously, we did some filtering which I think is undesirable. Instead we should return the data as stored in the storage. * Touched handlers use the ABI interfaces where possible. * Local image resolution: previously Podman would match "foo" on "myfoo". This behaviour has been changed and Podman will now only match on repository boundaries such that "foo" would match "my/foo" but not "myfoo". I consider the old behaviour to be a bug, at the very least an exotic corner case. * Futhermore, "foo:none" does *not* resolve to a local image "foo" without tag anymore. It's a hill I am (almost) willing to die on. * `image prune` prints the IDs of pruned images. Previously, in some cases, the names were printed instead. The API clearly states ID, so we should stick to it. * Compat endpoint image removal with _force_ deletes the entire not only the specified tag. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | cgroup: always honor --cgroup-parent with cgroupfsGiuseppe Scrivano2021-05-03
|/ | | | | | | | | if --cgroup-parent is specified, always honor it without doing any detection whether cgroups are supported or not. Closes: https://github.com/containers/podman/issues/10173 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add support for CDI device configurationSebastian Jug2021-04-20
| | | | | | | | - Persist CDIDevices in container config - Add e2e test - Log HasDevice error and add additional condition for safety Signed-off-by: Sebastian Jug <seb@stianj.ug>
* cgroup: do not set cgroup parent when rootless and cgroupfsGiuseppe Scrivano2021-04-12
| | | | | | | | | do not set the cgroup parent when running as rootless with cgroupfs, even if cgroup v2 is used. Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947999 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Don't relabel volumes if running in a privileged containerDaniel J Walsh2021-04-05
| | | | | | | | | Docker does not relabel this content, and openstack is running containers in this manner. There is a penalty for doing this on each container, that is not worth taking on a disable SELinux container. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* rootless cni without infra containerPaul Holzinger2021-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of creating an extra container create a network and mount namespace inside the podman user namespace. This ns is used to for rootless cni operations. This helps to align the rootless and rootful network code path. If we run as rootless we just have to set up a extra net ns and initialize slirp4netns in it. The ocicni lib will be called in that net ns. This design allows allows easier maintenance, no extra container with pause processes, support for rootless cni with --uidmap and possibly more. The biggest problem is backwards compatibility. I don't think live migration can be possible. If the user reboots or restart all cni containers everything should work as expected again. The user is left with the rootless-cni-infa container and image but this can safely be removed. To make the existing cni configs work we need execute the cni plugins in a extra mount namespace. This ensures that we can safely mount over /run and /var which have to be writeable for the cni plugins without removing access to these files by the main podman process. One caveat is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns` accessible. `XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`. To ensure that we keep the netns directory we bind mount this relative to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns before we mount the run directory. The run directory is mounted recursive, this makes the netns directory at the same path accessible as before. This also allows iptables-legacy to work because /run/xtables.lock is now writeable. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* [NO TESTS NEEDED] Fix for kernel without CONFIG_USER_NSなつき2021-03-26
| | | Signed-off-by: Natsuki <i@ntk.me>
* Validate passed in timezone from tz optionTomSweeneyRedHat2021-03-21
| | | | | | | | | | | | | | | | | | | | | | | | Erik Sjolund reported an issue where a badly formated file could be passed into the `--tz` option and then the date in the container would be badly messed up: ``` erik@laptop:~$ echo Hello > file.txt erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti docker.io/library/alpine cat /etc/localtime Hello erik@laptop:~$ podman --version podman version 3.0.0-rc1 erik@laptop:~$ ``` This fix checks to make sure the TZ passed in is a valid value and then proceeds with the rest of the processing. This was first reported as a potential security issue, but it was thought not to be. However, I thought closing the hole sooner rather than later would be good. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* turn hidden --trace into a NOPValentin Rothberg2021-03-08
| | | | | | | | | | The --trace has helped in early stages analyze Podman code. However, it's contributing to dependency and binary bloat. The standard go tooling can also help in profiling, so let's turn `--trace` into a NOP. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Use functions and defines from checkpointctlAdrian Reber2021-03-02
| | | | | | | | No functional changes. [NO TESTS NEEDED] - only moving code around Signed-off-by: Adrian Reber <areber@redhat.com>
* Move checkpoint/restore code to pkg/checkpoint/crutilsAdrian Reber2021-03-02
| | | | | | | | | | | To be able to reuse common checkpoint/restore functions this commit moves code to pkg/checkpoint/crutils. This commit has not functional changes. It only moves code around. [NO TESTS NEEDED] - only moving code around Signed-off-by: Adrian Reber <areber@redhat.com>
* Add dns search domains from cni response to resolv.confPaul Holzinger2021-02-24
| | | | | | | This fixes slow local host name lookups. see containers/dnsname#57 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add U volume flag to chown source volumesEduardo Vega2021-02-22
| | | | Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Do not reset storage when running inside of a containerDaniel J Walsh2021-02-16
| | | | | | | | | | | | | | | | | | | | | | | | Currently if the host shares container storage with a container running podman, the podman inside of the container resets the storage on the host. This can cause issues on the host, as well as causes the podman command running the container, to fail to unmount /dev/shm. podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello * unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy * unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy Since podman is volume mounting in the graphroot, it will add a flag to /run/.containerenv to tell podman inside of container whether to reset storage or not. Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip reset of storage. Also added tests to make sure /run/.containerenv is runnig correctly. Fixes: https://github.com/containers/podman/issues/9191 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #9399 from vrothberg/home-sweet-homeOpenShift Merge Robot2021-02-16
|\ | | | | do not set empty $HOME
| * do not set empty $HOMEValentin Rothberg2021-02-16
| | | | | | | | | | | | | | | | | | | | | | Make sure to not set an empty $HOME for containers and let it default to "/". https://github.com/containers/crun/pull/599 is required to fully address #9378. Partially-Fixes: #9378 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Don't chown workdir if it already existsDaniel J Walsh2021-02-16
|/ | | | | | | | | Currently podman is always chowning the WORKDIR to root:root This PR will return if the WORKDIR already exists. Fixes: https://github.com/containers/podman/issues/9387 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-09-30 05:32:57 +0000