summaryrefslogtreecommitdiff
path: root/libpod/container_internal_linux.go
Commit message (Collapse)AuthorAge
* container: workdir resolution must consider symlink if explicitly configuredAditya R2022-03-02
| | | | | | | | | | | | | | | | | | | | | | | While resolving `workdir` we mostly create a `workdir` when `stat` fails with `ENOENT` or `ErrNotExist` however following cases are not true when user explicitly specifies a `workdir` while `running` using `--workdir` which tells `podman` to only use workdir if its exists on the container. Following configuration is implicity set with other `run` mechanism like `podman play kube` Problem with explicit `--workdir` or similar implicit config in `podman play kube` is that currently podman ignores the fact that workdir can also be a `symlink` and actual `link` could be valid. Hence following commit ensures that in such scenarios when a `workdir` is not found and we cannot create a `workdir` podman must perform a check to ensure that if `workdir` is a `symlink` and `link` is resolved successfully and resolved link is present on the container then we return as it is. Docker performs a similar behviour. Signed-off-by: Aditya R <arajan@redhat.com>
* Implement Podman Container Clonecdoern2022-02-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | podman container clone takes the id of an existing continer and creates a specgen from the given container's config recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want into clone over time allowing the user to clone with as much or as little of the original config as they want. container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's the current supported flags are: --destroy (remove the original container) --name (new ctr name) --cpus (sets cpu period and quota) --cpuset-cpus --cpu-period --cpu-rt-period --cpu-rt-runtime --cpu-shares --cpuset-mems --memory --run resolves #10875 Signed-off-by: cdoern <cdoern@redhat.com> Signed-off-by: cdoern <cbdoer23@g.holycross.edu> Signed-off-by: cdoern <cdoern@redhat.com>
* Modify /etc/resolv.conf when connecting/disconnectingMatthew Heon2022-02-10
| | | | | | | | | | | | | | | | | | The `podman network connect` and `podman network disconnect` commands give containers access to different networks than the ones they were created with; these networks can also have DNS servers associated with them. Until now, however, we did not modify resolv.conf as network membership changed. With this PR, `podman network connect` will add any new nameservers supported by the new network to the container's /etc/resolv.conf, and `podman network disconnect` command will do the opposite, removing the network's nameservers from `/etc/resolv.conf`. Fixes #9603 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* append podman dns search domainPaul Holzinger2022-02-04
| | | | | | | | | | Append the podman dns seach domain to the host search domains when we use the dnsname/aardvark server. Previously it would only use podman seach domains and discard the host domains. Fixes #13103 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* libpod: enforce noexec,nosuid,nodev for /dev/shmGiuseppe Scrivano2022-02-02
| | | | | | | these mount flags are already used for the /dev/shm mount on the host, but they are not set for the bind mount itself. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* volume: add support for non-volatile upperdir,workdir for overlay volumesAditya Rajan2022-01-28
| | | | | | | | | | | | | | | | | | | | Often users want their overlayed volumes to be `non-volatile` in nature that means that same `upper` dir can be re-used by one or more containers but overall of nature of volumes still have to be `overlay` so work done is still on a overlay not on the actual volume. Following PR adds support for more advanced options i.e custom `workdir` and `upperdir` for overlayed volumes. So that users can re-use `workdir` and `upperdir` across new containers as well. Usage ```console $ podman run -it -v myvol:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh ``` Signed-off-by: Aditya R <arajan@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Standardize on capatalized CgroupsDaniel J Walsh2022-01-14
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Use new CDI APIEvan Lezar2022-01-14
| | | | | | | This change updates the CDI API to commit 46367ec063fda9da931d050b308ccd768e824364 which addresses some inconistencies in the previous implementation. Signed-off-by: Evan Lezar <elezar@nvidia.com>
* Merge pull request #12828 from giuseppe/drop-checkOpenShift Merge Robot2022-01-13
|\ | | | | libpod: drop check for empty pod cgroup
| * libpod: refine check for empty pod cgroupGiuseppe Scrivano2022-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | rootless containers do not use cgroups on cgroupv1 or if using cgroupfs, so improve the check to account for such configuration. Closes: https://github.com/containers/podman/issues/10800 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2028243 [NO NEW TESTS NEEDED] it requires rebooting and the rundir on a non tmpfs file system. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | use libnetwork from c/commonPaul Holzinger2022-01-12
|/ | | | | | | | The libpod/network packages were moved to c/common so that buildah can use it as well. To prevent duplication use it in podman as well and remove it from here. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* fix host.containers.internal entry for macvlan networksPaul Holzinger2022-01-11
| | | | | | | | | | | | For ip/macvlan networks we cannot use the gateway as address for this hostname. In this case the gateway is normally not on the host so we just try to use a local ip instead. [NO NEW TESTS NEEDED] We cannot run macvlan networks in CI. Fixes #11351 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Allow users to add host user accounts to /etc/passwdDaniel J Walsh2021-12-23
| | | | | | | | | | | Some containers require certain user account(s) to exist within the container when they are run. This option will allow callers to add a bunch of passwd entries from the host to the container even if the entries are not in the local /etc/passwd file on the host. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Enable checkpoint/restore for /dev/shmRadostin Stoyanov2021-12-23
| | | | | | | | | | | | | | | | When Podman is running a container in private IPC mode (default), it creates a bind mount for /dev/shm that is then attached to a tmpfs folder on the host file system. However, checkpointing a container has the side-effect of stopping that container and unmount the tmpfs used for /dev/shm. As a result, after checkpoint all files stored in the container's /dev/shm would be lost and the container might fail to restore from checkpoint. To address this problem, this patch creates a tar file with the content of /dev/shm that is included in the container checkpoint and used to restore the container. Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
* Always run passwd management code when DB value is nilMatthew Heon2021-12-22
| | | | | | | | | | | | This ensures that existing containers will still manage `/etc/passwd` by default, as they have been doing until now. New containers that explicitly set `false` will still have passwd management disabled, but otherwise the code will run. [NO NEW TESTS NEEDED] This will only be caught on upgrade and I don't really know how to write update tests - and Ed is on PTO. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Merge pull request #12375 from rhatdan/hostsOpenShift Merge Robot2021-12-22
|\ | | | | Use hosts public ip address in rootless containers
| * Use hosts public ip address in rootless containersDaniel J Walsh2021-12-21
| | | | | | | | | | | | | | | | | | Add first non localhost ipv4 of all host interfaces as destination for host.contaners.internal for rootless containers. Fixes: https://github.com/containers/podman/issues/12000 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #12668 from vrothberg/fix-12667OpenShift Merge Robot2021-12-22
|\ \ | | | | | | support hosts without /etc/hosts
| * | support hosts without /etc/hostsValentin Rothberg2021-12-22
| |/ | | | | | | | | Fixes: #12667 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* / Podman run --passwdcdoern2021-12-21
|/ | | | | | | | | added support for a new flag --passwd which, when false prohibits podman from creating entries in /etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint resolves #11805 Signed-off-by: cdoern <cdoern@redhat.com>
* Add more checkpoint/restore information to 'inspect'Adrian Reber2021-12-17
| | | | | | | | | | | | | | | | | | | | | | | | This adds the following information to the output of 'podman inspect': * CheckpointedAt - time the container was checkpointed Only set if the container has been checkpointed * RestoredAt - time the container was restored Only set if the container has been restored * CheckpointLog - path to the checkpoint log file (CRIU's dump.log) Only set if the log file exists (--keep) * RestoreLog - path to the restore log file (CRIU's restore.log) Only set if the log file exists (--keep) * CheckpointPath - path to the actual (CRIU) checkpoint files Only set if the checkpoint files exists (--keep) * Restored - set to true if the container has been restored Only set if the container has been restored Signed-off-by: Adrian Reber <areber@redhat.com>
* network db rewrite: migrate existing settingsPaul Holzinger2021-12-14
| | | | | | | | | | | | | | The new network db structure stores everything in the networks bucket. Previously some network settings were not written the the network bucket and only stored in the container config. Instead of the old format which used the container ID as value in the networks buckets we now use the PerNetworkoptions struct there. To migrate existing users we use the state.GetNetworks() function. If it fails to read the new format it will automatically migrate the old config format to the new one. This is allows a flawless migration path. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #12498 from rhatdan/cgroupsOpenShift Merge Robot2021-12-07
|\ | | | | Update vendor or containers/common moving pkg/cgroups there
| * Update vendor or containers/common moving pkg/cgroups thereDaniel J Walsh2021-12-07
| | | | | | | | | | | | | | [NO NEW TESTS NEEDED] This is just moving pkg/cgroups out so existing tests should be fine. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | volume: apply exact permission of target directory without adding extra 0111Aditya Rajan2021-12-07
|/ | | | | | | | While trying to match permissions of target directory podman adds extra `0111` which should not be needed if target path does not have execute permission. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* libpod: improve heuristic to detect cgroupGiuseppe Scrivano2021-11-24
| | | | | | | | | | | improve the heuristic to detect the scope that was created for the container. This is necessary with systemd running as PID 1, since it moves itself to a different sub-cgroup, thus stats would not account for other processes in the same container. Closes: https://github.com/containers/podman/issues/12400 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* rename libpod nettypes fieldsPaul Holzinger2021-11-16
| | | | | | | | | | Some field names are confusing. Change them so that they make more sense to the reader. Since these fields are only in the main branch we can safely rename them without worrying about backwards compatibility. Note we have to change the field names in netavark too. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #12100 from rhatdan/envOpenShift Merge Robot2021-11-16
|\ | | | | Add option --unsetenv to remove default environment variables
| * Add --unsetenv & --unsetenv-all to remove def environment variablesDaniel J Walsh2021-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Podman adds a few environment variables by default, and currently there is no way to get rid of them from your container. This option will allow you to specify which defaults you don't want. --unsetenv-all will remove all default environment variables. Default environment variables can come from podman builtin, containers.conf or from the container image. Fixes: https://github.com/containers/podman/issues/11836 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #12294 from flouthoc/secret-mount-targetOpenShift Merge Robot2021-11-16
|\ \ | |/ |/| secret: honor custom `target=` for secrets with `type=mount` for ctr.
| * secret: honor custom target for secrets with runAditya Rajan2021-11-15
| | | | | | | | | | | | | | | | | | | | | | Honor custom `target` if specified while running or creating containers with secret `type=mount`. Example: `podman run -it --secret token,type=mount,target=TOKEN ubi8/ubi:latest bash` Signed-off-by: Aditya Rajan <arajan@redhat.com>
* | Added optional container restore statisticsAdrian Reber2021-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the parameter '--print-stats' to 'podman container restore'. With '--print-stats' Podman will measure how long Podman itself, the OCI runtime and CRIU requires to restore a checkpoint and print out these information. CRIU already creates process restore statistics which are just read in addition to the added measurements. In contrast to just printing out the ID of the restored container, Podman will now print out JSON: # podman container restore --latest --print-stats { "podman_restore_duration": 305871, "container_statistics": [ { "Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20", "runtime_restore_duration": 140614, "criu_statistics": { "forking_time": 5, "restore_time": 67672, "pages_restored": 14 } } ] } The output contains 'podman_restore_duration' which contains the number of microseconds Podman required to restore the checkpoint. The output also includes 'runtime_restore_duration' which is the time the runtime needed to restore that specific container. Each container also includes 'criu_statistics' which displays the timing information collected by CRIU. Signed-off-by: Adrian Reber <areber@redhat.com>
* | Added optional container checkpointing statisticsAdrian Reber2021-11-15
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the parameter '--print-stats' to 'podman container checkpoint'. With '--print-stats' Podman will measure how long Podman itself, the OCI runtime and CRIU requires to create a checkpoint and print out these information. CRIU already creates checkpointing statistics which are just read in addition to the added measurements. In contrast to just printing out the ID of the checkpointed container, Podman will now print out JSON: # podman container checkpoint --latest --print-stats { "podman_checkpoint_duration": 360749, "container_statistics": [ { "Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808", "runtime_checkpoint_duration": 177222, "criu_statistics": { "freezing_time": 100657, "frozen_time": 60700, "memdump_time": 8162, "memwrite_time": 4224, "pages_scanned": 20561, "pages_written": 2129 } } ] } The output contains 'podman_checkpoint_duration' which contains the number of microseconds Podman required to create the checkpoint. The output also includes 'runtime_checkpoint_duration' which is the time the runtime needed to checkpoint that specific container. Each container also includes 'criu_statistics' which displays the timing information collected by CRIU. Signed-off-by: Adrian Reber <areber@redhat.com>
* Fix rootless networking with userns and portsPaul Holzinger2021-11-09
| | | | | | | | A rootless container created with a custom userns and forwarded ports did not work. I refactored the network setup to make the setup logic more clear. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add 'stats-dump' file to exported checkpointAdrian Reber2021-11-05
| | | | | | | | | | | | | | | | | | | | | | | | There was the question about how long it takes to create a checkpoint. CRIU already provides some statistics about how long it takes to create a checkpoint and similar. With this change the file 'stats-dump' is included in the checkpoint archive and the tool checkpointctl can be used to display these statistics: ./checkpointctl show -t /tmp/cp.tar --print-stats Displaying container checkpoint data from /tmp/dump.tar [...] CRIU dump statistics +---------------+-------------+--------------+---------------+---------------+---------------+ | FREEZING TIME | FROZEN TIME | MEMDUMP TIME | MEMWRITE TIME | PAGES SCANNED | PAGES WRITTEN | +---------------+-------------+--------------+---------------+---------------+---------------+ | 105405 us | 1376964 us | 504399 us | 446571 us | 492153 | 88689 | +---------------+-------------+--------------+---------------+---------------+---------------+ Signed-off-by: Adrian Reber <areber@redhat.com>
* Set Checkpointed state to false after restoreAdrian Reber2021-10-27
| | | | | | | | | A restored container still had the state set to 'Checkpointed: true' which seems wrong if it running again. [NO NEW TESTS NEEDED] Signed-off-by: Adrian Reber <areber@redhat.com>
* Update vendor github.com/opencontainers/runtime-toolsDaniel J Walsh2021-10-25
| | | | | | | | | This will change mount of /dev within container to noexec, making containers slightly more secure. [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* We should only be relabeling when on first runDaniel J Walsh2021-10-15
| | | | | | | | | On the second runs, the labels should be the same so no need to relabel. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2013548 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Don't include ctr.log if not using file loggingDaniel J Walsh2021-10-14
| | | | | | | | | | Checkpoint is blowing up when you use --log-driver=none [NO NEW TESTS NEEDED] No way currently to test checkpoint restore. Fixes: https://github.com/containers/podman/issues/11974 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* codespell codeDaniel J Walsh2021-10-12
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* always add short container id as net aliasPaul Holzinger2021-09-28
| | | | | | | | | | | | | | | | This matches what docker does. Also make sure the net aliases are also shown when the container is stopped. docker-compose uses this special alias entry to check if it is already correctly connected to the network. [1] Because we do not support static ips on network connect at the moment calling disconnect && connect will loose the static ip. Fixes #11748 [1] https://github.com/docker/compose/blob/0bea52b18dda3de8c28fcfb0c80cc08b8950645e/compose/service.py#L663-L667 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* standardize logrus messages to upper caseDaniel J Walsh2021-09-22
| | | | | | | | Remove ERROR: Error stutter from logrus messages also. [ NO TESTS NEEDED] This is just code cleanup. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* volume: Add support for overlay on named volumesAditya Rajan2021-09-21
| | | | | | | Following PR allows containers to create and mount overlays on top of named volumes instead of mounting actual volumes via already documented `:O`. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* podman machine: use gvproxy for host.containers.internalPaul Holzinger2021-09-20
| | | | | | | | | | | | | | | | Let the gvproxy dns server handle the host.containers.internal entry. Support for this is already added to gvproxy. [1] To make sure the container uses the dns response from gvproxy we should not add host.containers.internal to /etc/hosts in this case. [NO TESTS NEEDED] podman machine has no tests :/ Fixes #11642 [1] https://github.com/containers/gvisor-tap-vsock/commit/1108ea45162281046d239047a6db9bc187e64b08 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Only add 127.0.0.1 entry to /etc/hosts with --net=nonePaul Holzinger2021-09-16
| | | | | | | | | | | The check for net=none was wrong. It just assumed when we do not create the netns but have one set that we use the none mode. This however also applies to a container which joins the pod netns. To correctly check for the none mode use `config.NetMode.IsNone()`. Fixes #11596 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Wire network interface into libpodPaul Holzinger2021-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of the new network interface in libpod. This commit contains several breaking changes: - podman network create only outputs the new network name and not file path. - podman network ls shows the network driver instead of the cni version and plugins. - podman network inspect outputs the new network struct and not the cni conflist. - The bindings and libpod api endpoints have been changed to use the new network structure. The container network status is stored in a new field in the state. The status should be received with the new `c.getNetworkStatus`. This will migrate the old status to the new format. Therefore old containers should contine to work correctly in all cases even when network connect/ disconnect is used. New features: - podman network reload keeps the ip and mac for more than one network. - podman container restore keeps the ip and mac for more than one network. - The network create compat endpoint can now use more than one ipam config. The man pages and the swagger doc are updated to reflect the latest changes. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #11567 from giuseppe/cgroups-split-with-podsOpenShift Merge Robot2021-09-15
|\ | | | | libpod: honor --cgroups=split also with pods
| * libpod: honor --cgroups=split also with podsGiuseppe Scrivano2021-09-14
| | | | | | | | | | | | Honor --cgroups=split also when the container is running in a pod. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | test: enable --cgroup-parent testGiuseppe Scrivano2021-09-14
|/ | | | | | | | and fix it for running with runc. Closes: https://github.com/containers/podman/issues/11165 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>