summaryrefslogtreecommitdiff
path: root/libpod/container_internal_linux.go
Commit message (Collapse)AuthorAge
* Improve systemd-resolved detectionPaul Holzinger2021-06-08
| | | | | | | | | | | | | When 127.0.0.53 is the only nameserver in /etc/resolv.conf assume systemd-resolved is used. This is better because /etc/resolv.conf does not have to be symlinked to /run/systemd/resolve/stub-resolv.conf in order to use systemd-resolved. [NO TESTS NEEDED] Fixes: #10570 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add parameter to specify checkpoint archive compressionAdrian Reber2021-06-07
| | | | | | | | | | | | | | | The checkpoint archive compression was hardcoded to `archive.Gzip`. There have been requests to make the used compression algorithm selectable. There was especially the request to not compress the checkpoint archive to be able to create faster checkpoints when not compressing it. This also changes the default from `gzip` to `zstd`. This change should not break anything as the restore code path automatically handles whatever compression the user provides during restore. Signed-off-by: Adrian Reber <areber@redhat.com>
* add ipv6 nameservers only when the container has ipv6 enabledPaul Holzinger2021-06-03
| | | | | | | | | | | | | | | The containers /etc/resolv.conf allways preserved the ipv6 nameserves from the host even when the container did not supported ipv6. Check if the cni result contains an ipv6 address or slirp4netns has ipv6 support enabled and only add the ipv6 nameservers when this is the case. The test needs to have an ipv6 nameserver in the hosts /etc/hosts but we should never mess with this file on the host. Therefore the test is skipped when no ipv6 is detected. Fixes #10158 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #10334 from mheon/add_relabel_vol_pluginOpenShift Merge Robot2021-05-17
|\ | | | | Ensure that :Z/:z/:U can be used with named volumes
| * Ensure that :Z/:z/:U can be used with named volumesMatthew Heon2021-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Docker allows relabeling of any volume passed in via -v, even including named volumes. This normally isn't an issue at all, given named volumes get the right label for container access automatically, but this becomes an issue when volume plugins are involved - these aren't managed by Podman, and may well be unaware of SELinux labelling. We could automatically relabel these volumes on creation, but I'm still reluctant to do that (feels like it could break things). Instead, let's allow :z and :Z to be used with named volumes, so users can explicitly request relabel of a volume plugin-backed volume. We also get :U at the same time. I don't see any real need for it but it also doesn't seem to hurt, so I didn't bother disabling it. Fixes #10273 Signed-off-by: Matthew Heon <mheon@redhat.com>
* | Merge pull request #10366 from ashley-cui/secretoptionsOpenShift Merge Robot2021-05-17
|\ \ | | | | | | Support uid,gid,mode options for secrets
| * | Support uid,gid,mode options for secretsAshley Cui2021-05-17
| |/ | | | | | | | | | | | | Support UID, GID, Mode options for mount type secrets. Also, change default secret permissions to 444 so all users can read secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* / Add host.containers.internal entry into container's etc/hostsBaron Lenardson2021-05-17
|/ | | | | | | | | | | This change adds the entry `host.containers.internal` to the `/etc/hosts` file within a new containers filesystem. The ip address is determined by the containers networking configuration and points to the gateway address for the containers networking namespace. Closes #5651 Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
* Merge pull request #10221 from ashley-cui/envsecOpenShift Merge Robot2021-05-07
|\ | | | | Add support for environment variable secrets
| * Add support for environment variable secretsAshley Cui2021-05-06
| | | | | | | | | | | | | | | | Env var secrets are env vars that are set inside the container but not commited to and image. Also support reading from env var when creating a secret. Signed-off-by: Ashley Cui <acui@redhat.com>
* | Revert Patch to relabel if selinux not enabledDaniel J Walsh2021-05-06
| | | | | | | | | | | | | | | | | | | | Revert : https://github.com/containers/podman/pull/9895 Turns out that if Docker is in --selinux-enabeled, it still relabels if the user tells the system to, even if running a --privileged container or if the selinux separation is disabled --security-opt label=disable. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | cgroup: fix rootless --cgroup-parent with podsGiuseppe Scrivano2021-05-06
| | | | | | | | | | | | | | | | | | | | extend to pods the existing check whether the cgroup is usable when running as rootless with cgroupfs. commit 17ce567c6827abdcd517699bc07e82ccf48f7619 introduced the regression. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | migrate Podman to containers/common/libimageValentin Rothberg2021-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate the Podman code base over to `common/libimage` which replaces `libpod/image` and a lot of glue code entirely. Note that I tried to leave bread crumbs for changed tests. Miscellaneous changes: * Some errors yield different messages which required to alter some tests. * I fixed some pre-existing issues in the code. Others were marked as `//TODO`s to prevent the PR from exploding. * The `NamesHistory` of an image is returned as is from the storage. Previously, we did some filtering which I think is undesirable. Instead we should return the data as stored in the storage. * Touched handlers use the ABI interfaces where possible. * Local image resolution: previously Podman would match "foo" on "myfoo". This behaviour has been changed and Podman will now only match on repository boundaries such that "foo" would match "my/foo" but not "myfoo". I consider the old behaviour to be a bug, at the very least an exotic corner case. * Futhermore, "foo:none" does *not* resolve to a local image "foo" without tag anymore. It's a hill I am (almost) willing to die on. * `image prune` prints the IDs of pruned images. Previously, in some cases, the names were printed instead. The API clearly states ID, so we should stick to it. * Compat endpoint image removal with _force_ deletes the entire not only the specified tag. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | cgroup: always honor --cgroup-parent with cgroupfsGiuseppe Scrivano2021-05-03
|/ | | | | | | | | if --cgroup-parent is specified, always honor it without doing any detection whether cgroups are supported or not. Closes: https://github.com/containers/podman/issues/10173 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add support for CDI device configurationSebastian Jug2021-04-20
| | | | | | | | - Persist CDIDevices in container config - Add e2e test - Log HasDevice error and add additional condition for safety Signed-off-by: Sebastian Jug <seb@stianj.ug>
* cgroup: do not set cgroup parent when rootless and cgroupfsGiuseppe Scrivano2021-04-12
| | | | | | | | | do not set the cgroup parent when running as rootless with cgroupfs, even if cgroup v2 is used. Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947999 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Don't relabel volumes if running in a privileged containerDaniel J Walsh2021-04-05
| | | | | | | | | Docker does not relabel this content, and openstack is running containers in this manner. There is a penalty for doing this on each container, that is not worth taking on a disable SELinux container. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* rootless cni without infra containerPaul Holzinger2021-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of creating an extra container create a network and mount namespace inside the podman user namespace. This ns is used to for rootless cni operations. This helps to align the rootless and rootful network code path. If we run as rootless we just have to set up a extra net ns and initialize slirp4netns in it. The ocicni lib will be called in that net ns. This design allows allows easier maintenance, no extra container with pause processes, support for rootless cni with --uidmap and possibly more. The biggest problem is backwards compatibility. I don't think live migration can be possible. If the user reboots or restart all cni containers everything should work as expected again. The user is left with the rootless-cni-infa container and image but this can safely be removed. To make the existing cni configs work we need execute the cni plugins in a extra mount namespace. This ensures that we can safely mount over /run and /var which have to be writeable for the cni plugins without removing access to these files by the main podman process. One caveat is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns` accessible. `XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`. To ensure that we keep the netns directory we bind mount this relative to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns before we mount the run directory. The run directory is mounted recursive, this makes the netns directory at the same path accessible as before. This also allows iptables-legacy to work because /run/xtables.lock is now writeable. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* [NO TESTS NEEDED] Fix for kernel without CONFIG_USER_NSなつき2021-03-26
| | | Signed-off-by: Natsuki <i@ntk.me>
* Validate passed in timezone from tz optionTomSweeneyRedHat2021-03-21
| | | | | | | | | | | | | | | | | | | | | | | | Erik Sjolund reported an issue where a badly formated file could be passed into the `--tz` option and then the date in the container would be badly messed up: ``` erik@laptop:~$ echo Hello > file.txt erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti docker.io/library/alpine cat /etc/localtime Hello erik@laptop:~$ podman --version podman version 3.0.0-rc1 erik@laptop:~$ ``` This fix checks to make sure the TZ passed in is a valid value and then proceeds with the rest of the processing. This was first reported as a potential security issue, but it was thought not to be. However, I thought closing the hole sooner rather than later would be good. Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* turn hidden --trace into a NOPValentin Rothberg2021-03-08
| | | | | | | | | | The --trace has helped in early stages analyze Podman code. However, it's contributing to dependency and binary bloat. The standard go tooling can also help in profiling, so let's turn `--trace` into a NOP. [NO TESTS NEEDED] Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Use functions and defines from checkpointctlAdrian Reber2021-03-02
| | | | | | | | No functional changes. [NO TESTS NEEDED] - only moving code around Signed-off-by: Adrian Reber <areber@redhat.com>
* Move checkpoint/restore code to pkg/checkpoint/crutilsAdrian Reber2021-03-02
| | | | | | | | | | | To be able to reuse common checkpoint/restore functions this commit moves code to pkg/checkpoint/crutils. This commit has not functional changes. It only moves code around. [NO TESTS NEEDED] - only moving code around Signed-off-by: Adrian Reber <areber@redhat.com>
* Add dns search domains from cni response to resolv.confPaul Holzinger2021-02-24
| | | | | | | This fixes slow local host name lookups. see containers/dnsname#57 Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Add U volume flag to chown source volumesEduardo Vega2021-02-22
| | | | Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Do not reset storage when running inside of a containerDaniel J Walsh2021-02-16
| | | | | | | | | | | | | | | | | | | | | | | | Currently if the host shares container storage with a container running podman, the podman inside of the container resets the storage on the host. This can cause issues on the host, as well as causes the podman command running the container, to fail to unmount /dev/shm. podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello * unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy * unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy Since podman is volume mounting in the graphroot, it will add a flag to /run/.containerenv to tell podman inside of container whether to reset storage or not. Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip reset of storage. Also added tests to make sure /run/.containerenv is runnig correctly. Fixes: https://github.com/containers/podman/issues/9191 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #9399 from vrothberg/home-sweet-homeOpenShift Merge Robot2021-02-16
|\ | | | | do not set empty $HOME
| * do not set empty $HOMEValentin Rothberg2021-02-16
| | | | | | | | | | | | | | | | | | | | | | Make sure to not set an empty $HOME for containers and let it default to "/". https://github.com/containers/crun/pull/599 is required to fully address #9378. Partially-Fixes: #9378 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* | Don't chown workdir if it already existsDaniel J Walsh2021-02-16
|/ | | | | | | | | Currently podman is always chowning the WORKDIR to root:root This PR will return if the WORKDIR already exists. Fixes: https://github.com/containers/podman/issues/9387 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Enable whitespace linterPaul Holzinger2021-02-11
| | | | | | | | Use the whitespace linter and fix the reported problems. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Enable stylecheck linterPaul Holzinger2021-02-11
| | | | | | | | Use the stylecheck linter and fix the reported problems. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Rewrite copy-up to use buildah CopierMatthew Heon2021-02-10
| | | | | | | | | | | | | | | | The old copy-up implementation was very unhappy with symlinks, which could cause containers to fail to start for unclear reasons when a directory we wanted to copy-up contained one. Rewrite to use the Buildah Copier, which is more recent and should be both safer and less likely to blow up over links. At the same time, fix a deadlock in copy-up for volumes requiring mounting - the Mountpoint() function tried to take the already-acquired volume lock. Fixes #6003 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Implement SecretsAshley Cui2021-02-09
| | | | | | | | | | | Implement podman secret create, inspect, ls, rm Implement podman run/create --secret Secrets are blobs of data that are sensitive. Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file. After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname] This secret will not be commited to an image on a podman commit Signed-off-by: Ashley Cui <acui@redhat.com>
* fix logic when not creating a workdirValentin Rothberg2021-02-05
| | | | | | | | | | | When resolving the workdir of a container, we may need to create unless the user set it explicitly on the command line. Otherwise, we just do a presence check. Unfortunately, there was a missing return that lead us to fall through into attempting to create and chown the workdir. That caused a regression when running on a read-only root fs. Fixes: #9230 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* workdir presence checksValentin Rothberg2021-01-26
| | | | | | | | | | | | | | | | | | A container's workdir can be specified via the CLI via `--workdir` and via an image config with the CLI having precedence. Since images have a tendency to specify workdirs without necessarily shipping the paths with the root FS, make sure that Podman creates the workdir. When specified via the CLI, do not create the path, but check for its existence and return a human-friendly error. NOTE: `crun` is performing a similar check that would yield exit code 127. With this change, however, Podman performs the check and yields exit code 126. Since this is specific to `crun`, I do not consider it to be a breaking change of Podman. Fixes: #9040 Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* libpod: move slirp magic IPs to constsGiuseppe Scrivano2021-01-22
| | | | Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Initial implementation of volume pluginsMatthew Heon2021-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements support for mounting and unmounting volumes backed by volume plugins. Support for actually retrieving plugins requires a pull request to land in containers.conf and then that to be vendored, and as such is not yet ready. Given this, this code is only compile tested. However, the code for everything past retrieving the plugin has been written - there is support for creating, removing, mounting, and unmounting volumes, which should allow full functionality once the c/common PR is merged. A major change is the signature of the MountPoint function for volumes, which now, by necessity, returns an error. Named volumes managed by a plugin do not have a mountpoint we control; instead, it is managed entirely by the plugin. As such, we need to cache the path in the DB, and calls to retrieve it now need to access the DB (and may fail as such). Notably absent is support for SELinux relabelling and chowning these volumes. Given that we don't manage the mountpoint for these volumes, I am extremely reluctant to try and modify it - we could easily break the plugin trying to chown or relabel it. Also, we had no less than *5* separate implementations of inspecting a volume floating around in pkg/infra/abi and pkg/api/handlers/libpod. And none of them used volume.Inspect(), the only correct way of inspecting volumes. Remove them all and consolidate to using the correct way. Compat API is likely still doing things the wrong way, but that is an issue for another day. Fixes #4304 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fxes /etc/hosts duplicated every time after container restarted in a podzhangguanzhang2021-01-13
| | | | Signed-off-by: zhangguanzhang <zhangguanzhang@qq.com>
* Merge pull request #8947 from Luap99/cleanup-codeOpenShift Merge Robot2021-01-12
|\ | | | | Fix problems reported by staticcheck
| * Fix problems reported by staticcheckPaul Holzinger2021-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | `staticcheck` is a golang code analysis tool. https://staticcheck.io/ This commit fixes a lot of problems found in our code. Common problems are: - unnecessary use of fmt.Sprintf - duplicated imports with different names - unnecessary check that a key exists before a delete call There are still a lot of reported problems in the test files but I have not looked at those. Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* | add pre checkpointunknown2021-01-10
|/ | | | Signed-off-by: Zhuohan Chen <chen_zhuohan@163.com>
* Merge pull request #8781 from rst0git/cr-volumesOpenShift Merge Robot2021-01-08
|\ | | | | Add support for checkpoint/restore of containers with volumes
| * Include named volumes in container migrationRadostin Stoyanov2021-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When migrating a container with associated volumes, the content of these volumes should be made available on the destination machine. This patch enables container checkpoint/restore with named volumes by including the content of volumes in checkpoint file. On restore, volumes associated with container are created and their content is restored. The --ignore-volumes option is introduced to disable this feature. Example: # podman container checkpoint --export checkpoint.tar.gz <container> The content of all volumes associated with the container are included in `checkpoint.tar.gz` # podman container checkpoint --export checkpoint.tar.gz --ignore-volumes <container> The content of volumes is not included in `checkpoint.tar.gz`. This is useful, for example, when the checkpoint/restore is performed on the same machine. # podman container restore --import checkpoint.tar.gz The associated volumes will be created and their content will be restored. Podman will exit with an error if volumes with the same name already exist on the system or the content of volumes is not included in checkpoint.tar.gz # podman container restore --ignore-volumes --import checkpoint.tar.gz Volumes associated with container must already exist. Podman will not create them or restore their content. Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
| * Use Options as exportCheckpoint() argumentRadostin Stoyanov2021-01-07
| | | | | | | | | | | | | | | | | | | | Instead of individual values from ContainerCheckpointOptions, provide the options object. This is a preparation for the next patch where one more value of the options object is required in exportCheckpoint(). Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
* | rootless: automatically split userns rangesGiuseppe Scrivano2021-01-07
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | writing to the id map fails when an extent overlaps multiple mappings in the parent user namespace: $ cat /proc/self/uid_map 0 1000 1 1 100000 65536 $ unshare -U sleep 100 & [1] 1029703 $ printf "0 0 100\n" | tee /proc/$!/uid_map 0 0 100 tee: /proc/1029703/uid_map: Operation not permitted This limitation is particularly annoying when working with rootless containers as each container runs in the rootless user namespace, so a command like: $ podman run --uidmap 0:0:2 --rm fedora echo hi Error: writing file `/proc/664087/gid_map`: Operation not permitted: OCI permission denied would fail since the specified mapping overlaps the first mapping (where the user id is mapped to root) and the second extent with the additional IDs available. Detect such cases and automatically split the specified mapping with the equivalent of: $ podman run --uidmap 0:0:1 --uidmap 1:1:1 --rm fedora echo hi hi A fix has already been proposed for the kernel[1], but even if it accepted it will take time until it is available in a released kernel, so fix it also in pkg/rootless. [1] https://lkml.kernel.org/lkml/20201203150252.1229077-1-gscrivan@redhat.com/ Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Ensure that user-specified HOSTNAME is honoredMatthew Heon2021-01-06
| | | | | | | | | | | When adding the HOSTNAME environment variable, only do so if it is not already present in the spec. If it is already present, it was likely added by the user, and we should honor their requested value. Fixes #8886 Signed-off-by: Matthew Heon <mheon@redhat.com>
* SpellingJosh Soref2020-12-22
| | | | Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
* podman: drop checking valid rootless UIDGiuseppe Scrivano2020-12-11
| | | | | | | | | | | | | | | do not check whether the specified ID is valid in the user namespace. crun handles this case[1], so the check in Podman prevents to get to the OCI runtime at all. $ podman run --user 10:0 --uidmap 0:0:1 --rm -ti fedora:33 sh -c 'id; cat /proc/self/uid_map' uid=10(10) gid=0(root) groups=0(root),65534(nobody) 10 0 1 [1] https://github.com/containers/crun/pull/556 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Merge pull request #8571 from Luap99/podman-network-reloadOpenShift Merge Robot2020-12-08
|\ | | | | Implement pod-network-reload
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-08 19:56:55 +0000