summaryrefslogtreecommitdiff
path: root/libpod/container_internal_linux.go
Commit message (Collapse)AuthorAge
* Add more checkpoint/restore information to 'inspect'Adrian Reber2021-12-17
| | | | | | | | | | | | | | | | | | | | | | | | This adds the following information to the output of 'podman inspect': * CheckpointedAt - time the container was checkpointed Only set if the container has been checkpointed * RestoredAt - time the container was restored Only set if the container has been restored * CheckpointLog - path to the checkpoint log file (CRIU's dump.log) Only set if the log file exists (--keep) * RestoreLog - path to the restore log file (CRIU's restore.log) Only set if the log file exists (--keep) * CheckpointPath - path to the actual (CRIU) checkpoint files Only set if the checkpoint files exists (--keep) * Restored - set to true if the container has been restored Only set if the container has been restored Signed-off-by: Adrian Reber <areber@redhat.com>
* network db rewrite: migrate existing settingsPaul Holzinger2021-12-14
| | | | | | | | | | | | | | The new network db structure stores everything in the networks bucket. Previously some network settings were not written the the network bucket and only stored in the container config. Instead of the old format which used the container ID as value in the networks buckets we now use the PerNetworkoptions struct there. To migrate existing users we use the state.GetNetworks() function. If it fails to read the new format it will automatically migrate the old config format to the new one. This is allows a flawless migration path. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #12498 from rhatdan/cgroupsOpenShift Merge Robot2021-12-07
|\ | | | | Update vendor or containers/common moving pkg/cgroups there
| * Update vendor or containers/common moving pkg/cgroups thereDaniel J Walsh2021-12-07
| | | | | | | | | | | | | | [NO NEW TESTS NEEDED] This is just moving pkg/cgroups out so existing tests should be fine. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | volume: apply exact permission of target directory without adding extra 0111Aditya Rajan2021-12-07
|/ | | | | | | | While trying to match permissions of target directory podman adds extra `0111` which should not be needed if target path does not have execute permission. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* libpod: improve heuristic to detect cgroupGiuseppe Scrivano2021-11-24
| | | | | | | | | | | improve the heuristic to detect the scope that was created for the container. This is necessary with systemd running as PID 1, since it moves itself to a different sub-cgroup, thus stats would not account for other processes in the same container. Closes: https://github.com/containers/podman/issues/12400 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* rename libpod nettypes fieldsPaul Holzinger2021-11-16
| | | | | | | | | | Some field names are confusing. Change them so that they make more sense to the reader. Since these fields are only in the main branch we can safely rename them without worrying about backwards compatibility. Note we have to change the field names in netavark too. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #12100 from rhatdan/envOpenShift Merge Robot2021-11-16
|\ | | | | Add option --unsetenv to remove default environment variables
| * Add --unsetenv & --unsetenv-all to remove def environment variablesDaniel J Walsh2021-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Podman adds a few environment variables by default, and currently there is no way to get rid of them from your container. This option will allow you to specify which defaults you don't want. --unsetenv-all will remove all default environment variables. Default environment variables can come from podman builtin, containers.conf or from the container image. Fixes: https://github.com/containers/podman/issues/11836 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* | Merge pull request #12294 from flouthoc/secret-mount-targetOpenShift Merge Robot2021-11-16
|\ \ | |/ |/| secret: honor custom `target=` for secrets with `type=mount` for ctr.
| * secret: honor custom target for secrets with runAditya Rajan2021-11-15
| | | | | | | | | | | | | | | | | | | | | | Honor custom `target` if specified while running or creating containers with secret `type=mount`. Example: `podman run -it --secret token,type=mount,target=TOKEN ubi8/ubi:latest bash` Signed-off-by: Aditya Rajan <arajan@redhat.com>
* | Added optional container restore statisticsAdrian Reber2021-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the parameter '--print-stats' to 'podman container restore'. With '--print-stats' Podman will measure how long Podman itself, the OCI runtime and CRIU requires to restore a checkpoint and print out these information. CRIU already creates process restore statistics which are just read in addition to the added measurements. In contrast to just printing out the ID of the restored container, Podman will now print out JSON: # podman container restore --latest --print-stats { "podman_restore_duration": 305871, "container_statistics": [ { "Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20", "runtime_restore_duration": 140614, "criu_statistics": { "forking_time": 5, "restore_time": 67672, "pages_restored": 14 } } ] } The output contains 'podman_restore_duration' which contains the number of microseconds Podman required to restore the checkpoint. The output also includes 'runtime_restore_duration' which is the time the runtime needed to restore that specific container. Each container also includes 'criu_statistics' which displays the timing information collected by CRIU. Signed-off-by: Adrian Reber <areber@redhat.com>
* | Added optional container checkpointing statisticsAdrian Reber2021-11-15
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the parameter '--print-stats' to 'podman container checkpoint'. With '--print-stats' Podman will measure how long Podman itself, the OCI runtime and CRIU requires to create a checkpoint and print out these information. CRIU already creates checkpointing statistics which are just read in addition to the added measurements. In contrast to just printing out the ID of the checkpointed container, Podman will now print out JSON: # podman container checkpoint --latest --print-stats { "podman_checkpoint_duration": 360749, "container_statistics": [ { "Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808", "runtime_checkpoint_duration": 177222, "criu_statistics": { "freezing_time": 100657, "frozen_time": 60700, "memdump_time": 8162, "memwrite_time": 4224, "pages_scanned": 20561, "pages_written": 2129 } } ] } The output contains 'podman_checkpoint_duration' which contains the number of microseconds Podman required to create the checkpoint. The output also includes 'runtime_checkpoint_duration' which is the time the runtime needed to checkpoint that specific container. Each container also includes 'criu_statistics' which displays the timing information collected by CRIU. Signed-off-by: Adrian Reber <areber@redhat.com>
* Fix rootless networking with userns and portsPaul Holzinger2021-11-09
| | | | | | | | A rootless container created with a custom userns and forwarded ports did not work. I refactored the network setup to make the setup logic more clear. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add 'stats-dump' file to exported checkpointAdrian Reber2021-11-05
| | | | | | | | | | | | | | | | | | | | | | | | There was the question about how long it takes to create a checkpoint. CRIU already provides some statistics about how long it takes to create a checkpoint and similar. With this change the file 'stats-dump' is included in the checkpoint archive and the tool checkpointctl can be used to display these statistics: ./checkpointctl show -t /tmp/cp.tar --print-stats Displaying container checkpoint data from /tmp/dump.tar [...] CRIU dump statistics +---------------+-------------+--------------+---------------+---------------+---------------+ | FREEZING TIME | FROZEN TIME | MEMDUMP TIME | MEMWRITE TIME | PAGES SCANNED | PAGES WRITTEN | +---------------+-------------+--------------+---------------+---------------+---------------+ | 105405 us | 1376964 us | 504399 us | 446571 us | 492153 | 88689 | +---------------+-------------+--------------+---------------+---------------+---------------+ Signed-off-by: Adrian Reber <areber@redhat.com>
* Set Checkpointed state to false after restoreAdrian Reber2021-10-27
| | | | | | | | | A restored container still had the state set to 'Checkpointed: true' which seems wrong if it running again. [NO NEW TESTS NEEDED] Signed-off-by: Adrian Reber <areber@redhat.com>
* Update vendor github.com/opencontainers/runtime-toolsDaniel J Walsh2021-10-25
| | | | | | | | | This will change mount of /dev within container to noexec, making containers slightly more secure. [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* We should only be relabeling when on first runDaniel J Walsh2021-10-15
| | | | | | | | | On the second runs, the labels should be the same so no need to relabel. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2013548 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Don't include ctr.log if not using file loggingDaniel J Walsh2021-10-14
| | | | | | | | | | Checkpoint is blowing up when you use --log-driver=none [NO NEW TESTS NEEDED] No way currently to test checkpoint restore. Fixes: https://github.com/containers/podman/issues/11974 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* codespell codeDaniel J Walsh2021-10-12
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* always add short container id as net aliasPaul Holzinger2021-09-28
| | | | | | | | | | | | | | | | This matches what docker does. Also make sure the net aliases are also shown when the container is stopped. docker-compose uses this special alias entry to check if it is already correctly connected to the network. [1] Because we do not support static ips on network connect at the moment calling disconnect && connect will loose the static ip. Fixes #11748 [1] https://github.com/docker/compose/blob/0bea52b18dda3de8c28fcfb0c80cc08b8950645e/compose/service.py#L663-L667 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* standardize logrus messages to upper caseDaniel J Walsh2021-09-22
| | | | | | | | Remove ERROR: Error stutter from logrus messages also. [ NO TESTS NEEDED] This is just code cleanup. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* volume: Add support for overlay on named volumesAditya Rajan2021-09-21
| | | | | | | Following PR allows containers to create and mount overlays on top of named volumes instead of mounting actual volumes via already documented `:O`. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* podman machine: use gvproxy for host.containers.internalPaul Holzinger2021-09-20
| | | | | | | | | | | | | | | | Let the gvproxy dns server handle the host.containers.internal entry. Support for this is already added to gvproxy. [1] To make sure the container uses the dns response from gvproxy we should not add host.containers.internal to /etc/hosts in this case. [NO TESTS NEEDED] podman machine has no tests :/ Fixes #11642 [1] https://github.com/containers/gvisor-tap-vsock/commit/1108ea45162281046d239047a6db9bc187e64b08 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Only add 127.0.0.1 entry to /etc/hosts with --net=nonePaul Holzinger2021-09-16
| | | | | | | | | | | The check for net=none was wrong. It just assumed when we do not create the netns but have one set that we use the none mode. This however also applies to a container which joins the pod netns. To correctly check for the none mode use `config.NetMode.IsNone()`. Fixes #11596 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Wire network interface into libpodPaul Holzinger2021-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of the new network interface in libpod. This commit contains several breaking changes: - podman network create only outputs the new network name and not file path. - podman network ls shows the network driver instead of the cni version and plugins. - podman network inspect outputs the new network struct and not the cni conflist. - The bindings and libpod api endpoints have been changed to use the new network structure. The container network status is stored in a new field in the state. The status should be received with the new `c.getNetworkStatus`. This will migrate the old status to the new format. Therefore old containers should contine to work correctly in all cases even when network connect/ disconnect is used. New features: - podman network reload keeps the ip and mac for more than one network. - podman container restore keeps the ip and mac for more than one network. - The network create compat endpoint can now use more than one ipam config. The man pages and the swagger doc are updated to reflect the latest changes. Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #11567 from giuseppe/cgroups-split-with-podsOpenShift Merge Robot2021-09-15
|\ | | | | libpod: honor --cgroups=split also with pods
| * libpod: honor --cgroups=split also with podsGiuseppe Scrivano2021-09-14
| | | | | | | | | | | | Honor --cgroups=split also when the container is running in a pod. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* | test: enable --cgroup-parent testGiuseppe Scrivano2021-09-14
|/ | | | | | | | and fix it for running with runc. Closes: https://github.com/containers/podman/issues/11165 Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Add Checkpointed bool to InspectMatthew Heon2021-09-07
| | | | | | | | When inspecting a container, we now report whether the container was stopped by a `podman checkpoint` operation via a new bool in the State portion of inspected, `Checkpointed`. Signed-off-by: Matthew Heon <mheon@redhat.com>
* feat: add localhost into hosts if the networking mode is not hostParham Alvani2021-09-04
| | | | Signed-off-by: Parham Alvani <1995parham@tuta.io>
* pass LISTEN_* environment into containerValentin Rothberg2021-08-31
| | | | | | | | | | | | | | | Make sure that Podman passes the LISTEN_* environment into containers. Similar to runc, LISTEN_PID is set to 1. Also remove conditionally passing the LISTEN_FDS as extra files. The condition was wrong (inverted) and introduced to fix #3572 which related to running under varlink which has been dropped entirely with Podman 3.0. Note that the NOTIFY_SOCKET and LISTEN_* variables are cleared when running `system service`. Fixes: #10443 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* container: resolve workdir after all the mounts happen.flouthoc2021-08-30
| | | | | | | | There are use-cases where users would want to use overlay-mounts as workdir. For such cases workdir should be resolved after all the mounts are completed during the container init process. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* Implement SD-NOTIFY proxy in conmonDaniel J Walsh2021-08-20
| | | | | | | | | | | | | | | | This leverages conmon's ability to proxy the SD-NOTIFY socket. This prevents locking caused by OCI runtime blocking, waiting for SD-NOTIFY messages, and instead passes the messages directly up to the host. NOTE: Also re-enable the auto-update tests which has been disabled due to flakiness. With this change, Podman properly integrates into systemd. Fixes: #7316 Signed-off-by: Joseph Gooch <mrwizard@dok.org> Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Run codespell to fix spellingDaniel J Walsh2021-08-11
| | | | | | [NO TESTS NEEDED] Just fixing spelling. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for pod inside of user namespace.Daniel J Walsh2021-08-09
| | | | | | | | | | | | | Add the --userns flag to podman pod create and keep track of the userns setting that pod was created with so that all containers created within the pod will inherit that userns setting. Specifically we need to be able to launch a pod with --userns=keep-id Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Do not add an entry to /etc/hosts with `--net=host`Matthew Heon2021-08-04
| | | | | | | | | | | | | | | To match Docker's behavior, in the `--net=host` case, we need to use the host's `/etc/hosts` file, unmodified (without adding an entry for the container). We will still respect hosts from `--add-host` but will not make any automatic changes. Fortuntely, this is strictly a matter of removal and refactoring as we already base our `/etc/hosts` on the host's version - just need to remove the code that added entries when net=host was set. Fixes #10319 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Support checkpoint/restore with podsAdrian Reber2021-07-27
| | | | | | | | | | | | | | | | | | | This adds support to checkpoint containers out of pods and restore container into pods. It is only possible to restore a container into a pod if it has been checkpointed out of pod. It is also not possible to restore a non pod container into a pod. The main reason this does not work is the PID namespace. If a non pod container is being restored in a pod with a shared PID namespace, at least one process in the restored container uses PID 1 which is already in use by the infrastructure container. If someone tries to restore container from a pod with a shared PID namespace without a shared PID namespace it will also fail because the resulting PID namespace will not have a PID 1. Signed-off-by: Adrian Reber <areber@redhat.com>
* Prepare CRIU version check to work with multiple versionsAdrian Reber2021-07-27
| | | | | | | | The upcoming commit to support checkpointing out of Pods requires CRIU 3.16. This changes the CRIU version check to support checking for different versions. Signed-off-by: Adrian Reber <areber@redhat.com>
* fix: uid/gid for volume mounted to existing dirMatej Vasek2021-07-12
| | | | | | | If mounting to existing directory the uid/gid should be preserved. Primary uid/gid of container shouldn't be used. Signed-off-by: Matej Vasek <mvasek@redhat.com>
* podman diff accept two images or containersPaul Holzinger2021-07-02
| | | | | | | | | | | | | | | | | | | First, make podman diff accept optionally a second argument. This allows the user to specify a second image/container to compare the first with. If it is not set the parent layer will be used as before. Second, podman container diff should only use containers and podman image diff should only use images. Previously, podman container diff would use the image when both an image and container with this name exists. To make this work two new parameters have been added to the api. If they are not used the previous behaviour is used. The same applies to the bindings. Fixes #10649 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Fix systemd-resolved detection.Max Goltzsche2021-06-20
| | | | | | | | | | | | | | | Previously podman failed when run in an environment where 127.0.0.53 is the only nameserver but systemd-resolved is not used directly. In practice this happened when podman was run within an alpine container that used the host's network and the host was running systemd-resolved. This fix makes podman ignore a file not found error when reading /run/systemd/resolve/resolv.conf. Closes #10733 [NO TESTS NEEDED] Signed-off-by: Max Goltzsche <max.goltzsche@gmail.com>
* Merge pull request #10684 from Luap99/slirp-hostsOpenShift Merge Robot2021-06-16
|\ | | | | add correct slirp ip to /etc/hosts
| * add correct slirp ip to /etc/hostsPaul Holzinger2021-06-15
| | | | | | | | | | | | | | | | | | The container name should have the slirp interface ip set in /etc/hosts and not the gateway ip. Commit c8dfcce6db0a introduced this regression. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1972073 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* | Fix permissions on initially created named volumesDaniel J Walsh2021-06-14
|/ | | | | | | | Permission of volume should match the directory it is being mounted on. Fixes: https://github.com/containers/podman/issues/10188 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix pre-checkpointingAdrian Reber2021-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunately --pre-checkpointing never worked as intended and recent changes to runc have shown that it is broken. To create a pre-checkpoint CRIU expects the paths between the pre-checkpoints to be a relative path. If having a previous checkpoint it needs the be referenced like this: --prev-images-dir ../parent Unfortunately Podman was giving runc (and CRIU) an absolute path. Unfortunately, again, until March 2021 CRIU silently ignored if the path was not relative and switch back to normal checkpointing. This has been now fixed in CRIU and runc and running pre-checkpoint with the latest runc fails, because runc already sees that the path is absolute and returns an error. This commit fixes this by giving runc a relative path. This commit also fixes a second pre-checkpointing error which was just recently introduced. So summarizing: pre-checkpointing never worked correctly because CRIU ignored wrong parameters and recent changes broke it even more. Now both errors should be fixed. [NO TESTS NEEDED] Signed-off-by: Adrian Reber <areber@redhat.com> Signed-off-by: Adrian Reber <adrian@lisas.de>
* Improve systemd-resolved detectionPaul Holzinger2021-06-08
| | | | | | | | | | | | | When 127.0.0.53 is the only nameserver in /etc/resolv.conf assume systemd-resolved is used. This is better because /etc/resolv.conf does not have to be symlinked to /run/systemd/resolve/stub-resolv.conf in order to use systemd-resolved. [NO TESTS NEEDED] Fixes: #10570 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add parameter to specify checkpoint archive compressionAdrian Reber2021-06-07
| | | | | | | | | | | | | | | The checkpoint archive compression was hardcoded to `archive.Gzip`. There have been requests to make the used compression algorithm selectable. There was especially the request to not compress the checkpoint archive to be able to create faster checkpoints when not compressing it. This also changes the default from `gzip` to `zstd`. This change should not break anything as the restore code path automatically handles whatever compression the user provides during restore. Signed-off-by: Adrian Reber <areber@redhat.com>
* add ipv6 nameservers only when the container has ipv6 enabledPaul Holzinger2021-06-03
| | | | | | | | | | | | | | | The containers /etc/resolv.conf allways preserved the ipv6 nameserves from the host even when the container did not supported ipv6. Check if the cni result contains an ipv6 address or slirp4netns has ipv6 support enabled and only add the ipv6 nameservers when this is the case. The test needs to have an ipv6 nameserver in the hosts /etc/hosts but we should never mess with this file on the host. Therefore the test is skipped when no ipv6 is detected. Fixes #10158 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Merge pull request #10334 from mheon/add_relabel_vol_pluginOpenShift Merge Robot2021-05-17
|\ | | | | Ensure that :Z/:z/:U can be used with named volumes
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-08 00:41:36 +0000